Greeting,
After i have flashed the "HardSPL G4.zip" according by running Upgrade_SPL.bat from the PC. Then actually i choose to try it out by running TNT_V5_Offical. After flashing was done. I hard reset Dopod 818pro but nothing seems to work. I cannot comm with my HP because of its still in boot screen. The screen showing
IPL: 2.15.0001
SPL: 2.G4.4PDA
GSM: 02.69.21
OS: 6.0.0.0
then hang..... any idea... your help is appreciated. Thanks in advance!!!
asraf09 said:
Greeting,
After i have flashed the "HardSPL G4.zip" according by running Upgrade_SPL.bat from the PC. Then actually i choose to try it out by running TNT_V5_Offical. After flashing was done. I hard reset Dopod 818pro but nothing seems to work. The screen showing
IPL: 2.15.0001
SPL: 2.G4.4PDA
GSM: 02.69.21
OS: 6.0.0.0
then hang..... any idea... your help is appreciated. Thanks in advance!!!
Click to expand...
Click to collapse
By standar TNT5 is intend to be flashed with old methode (downgrade to NVID ROM then flashed with it)
You have reached step 1 in new Flash metode
I think you have mistaken flashed your prophet, with new step you cannot flashed ur prophet using old methode, you have to use new methode. The file is different, the old one is OS.nb and the new step using nk.nbf
Just download new methode ROM (Shadow 1.0 or else with nk.nbf file) then flash ur prophet using it.
Read the step by step guide carefully. do not mix the old methode with new methode
Thanks again for your advice but now i cannot comm with my HP... Its still in boot up screen. I have already reset to default factory setting but doesn't reponce..Any suggestion you have...
asraf09 said:
Thanks again for your advice but now i cannot comm with my HP... Its still in boot up screen...Any suggestion you have...
Click to expand...
Click to collapse
Turn off you prophet by push the power button around 4-5 second, then push the power button again while u plug the usb connector to ur pda.
ur pda will show the flasing screen (3 colors screen) then do the new methode flashing
you will need to get into bootloader mode .. you can try these buttons combinations
[Camera] + [Soft reset]
Greeting
Thanks guys for your great help but i need one more advice. How can i differentiate between *.nbf file and *.nb. Thanks again for your guidence...
asraf09 said:
Greeting
Thanks guys for your great help but i need one more advice. How can i differentiate between *.nbf file and *.nb. Thanks again for your guidence...
Click to expand...
Click to collapse
Wow, it is very simple.
If you have download a ROM, extract it to folder than try to find the file. if you find OS.nb then you have to flashed it using old methode.
but if you find nk.nbf file, you have to use the new methode.
Greeting
Thanks to all who helped me solve a small problem whereby it was a big problem for a small fries ...
asraf09 said:
Greeting
Thanks to all who helped me solve a small problem whereby it was a big problem for a small fries ...
Click to expand...
Click to collapse
Glad to hear that your prophet awake from hibernation
Just take sometimes to read the sticky thread specially how to upgrade to avoid some mistakes
If you want to use TNT_V5_Offical.. You should too make nk.nbf file from OS.nb and EXT.ROM
Try to look out this WM6 UPGRADE
Take a look step 3 and 4
It should work... I'll make nk.nbf and try it at my Prophet.
varanusvincent said:
If you want to use TNT_V5_Offical.. You should too make nk.nbf file from OS.nb and EXT.ROM
Try to look out this WM6 UPGRADE
Take a look step 3 and 4
It should work... I'll make nk.nbf and try it at my Prophet.
Click to expand...
Click to collapse
Hi varanusvincent,
Do you know how to cooked this ROM ? i want to fix and added some new application on it by default. Please PM me
PS: lagi pengen nyoba utak atik ROM nih
Thanks
tb146 said:
Hi varanusvincent,
Do you know how to cooked this ROM ? i want to fix and added some new application on it by default. Please PM me
PS: lagi pengen nyoba utak atik ROM nih
Thanks
Click to expand...
Click to collapse
You can try to added new application in Ext. ROM. Anyway new methode work too at this ROM.. I'm flashing it already..
I'll post the file later.
varanusvincent said:
You can try to added new application in Ext. ROM. Anyway new methode work too at this ROM.. I'm flashing it already..
I'll post the file later.
Click to expand...
Click to collapse
Hi Varanus,
I want to recook this ROM for My personal PDA , can u tell me how ?
tb146 said:
Hi Varanus,
I want to recook this ROM for My personal PDA , can u tell me how ?
Click to expand...
Click to collapse
You can ask gullum for it.. since he is the chef. You need his TNT Kitchen..
or you can take alook at
http://forum.xda-developers.com/showthread.php?t=309057
Anyway I've uploaded TNT Official with nk.nbf ..
Here is the LINK
i have hardspl my prophet a time ago and flashed multi-x using the new method. after finding out some bugs i decided to go back to touch xb and done this by using the old method - worked fine, xb is on my prophet and hardspl is still available. so it seems to work to use both methods one OR the other (but don't mix it like said befor..)
Related
To share with you a cab file to fix the problem of cleartype fonts in ROM 1.72.00 WWE.
You can put it in your Extended_ROM to have it run automatically after hardreset.
Run it and restart.
Idea from http://www.pdamobiz.com/forum/forum_posts.asp?TID=19190&PN=2
would it work on a 1.66 which have the same cleartype issues as 1.72 ?
it should as I took the font from 1.60.00WWE
works perfect!
Thanks m8
it works¡¡
It works :lol:
thanks
YES!
Thanks Mr.P
wonderful
It works perfectly, thanks
Never had working Cleartype on my XDAII as it had 1.66WWE when I got it. You're a lifesaver!
Phil
Umm... the program collided with some other. I needed to hardreset my device! Altough, when running from new install, i worked with this cleartypefix. Il try restoring my backup, to see if if still works after that.
OR JUST COPY THIS DLL TO YOUR WINDOWS FOLDER AND SOFTRESET
Thank you!!!!!
I'm crying for happiness!!!!
It works, it REALLY works!
Thanks Mr.P and ID64...
Nice, cleartype actually looks nice.. :wink:
wow. Thanks! Now it's time to test new roms ....
Thanks Mr. P
8)
Works with ROM 1.66?
Has anybody tried to install it with Rom1.66? Does it work?
Thanks
Re: Works with ROM 1.66?
lan_xda said:
Has anybody tried to install it with Rom1.66? Does it work?
Thanks
Click to expand...
Click to collapse
If you read this thread (it isnt very large) you will notice that it is taken from 1.66!
Re: Works with ROM 1.66?
skenliv said:
lan_xda said:
Has anybody tried to install it with Rom1.66? Does it work?
Thanks
Click to expand...
Click to collapse
If you read this thread (it isnt very large) you will notice that it is taken from 1.66!
Click to expand...
Click to collapse
Skenliv,
It sure as hell ISN'T taken from 1.66, as that's got poor Cleartype too.
Read the posts again - it's taken from 1.60 - that has GOOD Cleartype!
ah... sorry, mixed them up.. :?
thanks mate. :wink:
here comes the link:
http://www.ioicn.com.cn/forum/thread-261441-1-1.html
big thanks to spfans2006 and kingsenwong
download:
http://www.fs2you.com/files/9e67ee4c-f55e-11dc-91e1-0014221b798a/
http://baihua925.uubox.net/self.u/Public/5x6_wm6.1_0319.rar/
language:
en & cn
new link: (from McDaToKe)
http://rapidshare.com/files/100934508/5x6_wm6.1_0319.rar
here is the userguild (thank lazaj007 ) :
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-put USB cable to your phone,press and hold camera button, then press power button
-next check "0"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\0319.bin (localization of your rom)
after successful installising reboot your phone and it will be end
have fun!!!!!!
Good news!!!!
new rom comes here:
bluetooth and infrared ray have no problems,new xip 5.2.19202,new speed....
it's great!!!!
camara bug has solved:
http://www.ioicn.com.cn/forum/thread-267833-1-2.html
let's have fun with our hurricanes....
change two entries in registry below, IRDA will be working !!!!!!!!
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrCOMM]
"Dll"="IRCOMM.DLL" (original is IRCOMM1.DLL)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialIR]
"Dll"="SerialIR.Dll" (original is SerialIR1.Dll)
rom download
http://kingsen.uubox.net/self.u/dopod 5x6/5x6_wm6.1_19202_final_kingsen0409.rar/
http://www.ioicn.com.cn/forum/thread-264238-1-2.html
did someine test it? I dont wanna brick my phone again.
BTW : 1. NO need to create this thread, there is already one about wm6.1
2. First 2 links aint working
gangstaunitg said:
did someine test it? I dont wanna brick my phone again.
BTW : 1. NO need to create this thread, there is already one about wm6.1
2. First 2 links aint working
Click to expand...
Click to collapse
Is it fully translated to WWE?
hellejoep said:
Is it fully translated to WWE?
Click to expand...
Click to collapse
I want to try it, but cant download from that weird sites. what about u?
Pls reupload someone
gangstaunitg said:
I want to try it, but cant download from that weird sites. what about u?
Pls reupload someone
Click to expand...
Click to collapse
I downloaded it by right clicking and then save as on the third link.
hellejoep said:
I downloaded it by right clicking and then save as on the third link.
Click to expand...
Click to collapse
Hmm, it aint working for me , can u reupload it hellejhop
Im uppin it right now onto RS u can try than again
here it is for all of u ..... Click here to DL
McDaToKe said:
Im uppin it right now onto RS u can try than again
here it is for all of u ..... Click here to DL
Click to expand...
Click to collapse
Thx, appreciate that man
i'm sorry about the rom link.
but i can't test the link for u ,because we're in the different network
thank mc da toke
hi
this is the 1st time ive have done this so please, any help would be appreciated. i have an orange spv c550 that i have application unlocked, sim unlocked and cid thingy.
i have downloaded this *.bin file but what do i do know?
thanks in advance
floppsy said:
hi
this is the 1st time ive have done this so please, any help would be appreciated. i have an orange spv c550 that i have application unlocked, sim unlocked and cid thingy.
i have downloaded this *.bin file but what do i do know?
thanks in advance
Click to expand...
Click to collapse
Now it is very simple,
1.
In PC :
uncheck usb connection in active sync
2
in phone :
turn it off
while holding camera button stick usb cabel in and release camera button when
something appear and quickly hit ''0'' key on phone
3
inPC :
u need to have MMTY142 tool
open it and select ''usb''
than type l c:\rom.bin (remember to rename your rom to rom.bin,and u have
to put your rom in C:\....)
wait until finish
then write ResetDevice (case sensitive)
My advice: upgrading is easy but be 100% sure that your rom is compatible with yor phone, u should ask some more advanced people about it
Thanks m8
do i need something called ruu & spl???
floppsy said:
Thanks m8
do i need something called ruu & spl???
Click to expand...
Click to collapse
I suggest u to read this thread ''WM6 for SPV C550''
ok thanks ... ill read through it.
u should flash the spl first through ruu
that is a cracked one.
ok guys thanks i did it...seems to be working fine...had to install an english t9 cab...my next question is if i want to change to another wm 6.1 like lazaj is working on do i just do the last section with camera button ect or do you always need to flash the spl / ruu?
U just need to flash the bin to your phone flashing spl with RUU is not needed.
sometimes you need to format the BINFS
and than flash the bin
happy flashing
greez McDaToKe
I miss the unlock screen clock which was available in the yahei 1010 WM6 ROM. Is there any way to add this?
cu,
Dirk
Spades01 said:
I miss the unlock screen clock which was available in the yahei 1010 WM6 ROM. Is there any way to add this?
cu,
Dirk
Click to expand...
Click to collapse
i had the patch
here it is
View attachment 77053
Looks very good, i really like the homescreen with all these options.
Hi,
Sorry but i am new.
I have an nbh file.Alex.v52.ATT.162.Cube.ROM.nbh
i need to install it in my prophet.
how can this be done.
thank you in advance
itouzen said:
Hi,
Sorry but i am new.
I have an nbh file.Alex.v52.ATT.162.Cube.ROM.nbh
i need to install it in my prophet.
how can this be done.
thank you in advance
Click to expand...
Click to collapse
nbh??
Have you looked at this??
http://forum.xda-developers.com/showthread.php?t=401326
Hi,
Actually this thread talks about flushing NBF and not NBH.
I think it concerns extended ROM.
Any Ideas.
Please elaborate more
THX
are you sure that that rom is for prophet?
because i dont think so
itouzen said:
Hi,
Actually this thread talks about flushing NBF and not NBH.
I think it concerns extended ROM.
Any Ideas.
Please elaborate more
THX
Click to expand...
Click to collapse
Out of the 8 or 9 roms ive tried n my prophet, there are two kinds of roms, os.nb files (the older way of flashing) and nk.nbf files (newer method of flashing).
I managed to find the ROM you are trying to use (Google is great use it) at http://forum.xda-developers.com/showthread.php?t=363865
This ROM is for the Kaiser/TytnII so you CANNOT use it.
Search for Prophet ROMS and you'l be fine
just like i thought ....
YOU CAN'T FLASH A ROM FORM AN OTHER DEVICE TO PROPHET!!!
Thank you all for the support
GENE WM6.1 PDAVIET V03 - Build 20954.1.5.0
WWE
ROM 1.17.720.03 CHO HTC GENE
CE OS 5.2.20954 Build 20954.1.5.0
LINK:-
http://rapidshare.com/files/177356320/GENE_WM6.1__1_17_720_03__B20954.rar
PASSWOED :- PhamQuang
Can u post some more details like addendums and new features in ur rom..
thanx..
for new or old GENE ?
i try this rom on new gene but it's not working i think it's for old gene
i also try to dump this rom to port xip but i can't dup rom
@ankit360: Ya, it must be for old gene, never seen a ROM for new gene by pdaviet. And all their ROMs are protected so you wont be able to dump it. I donno why the person is so overprotective.
this rom for old GENE.
i instal rom on old GENE and good work.
nice rom.
boot screen ??
Does This Rom change the boot screen...???
as last PDAviet Rom has "smart mobility" boot screen
anyone tried this Rom ??
please tell me Ram uses n memory , after installation.
is this slow ??
hksin1988 said:
Does This Rom change the boot screen...???
as last PDAviet Rom has "smart mobility" boot screen
anyone tried this Rom ??
please tell me Ram uses n memory , after installation.
is this slow ??
Click to expand...
Click to collapse
yes this changes the splash screen during bootup...
nice room but its slowly
i installed this room before my gene dead \ i have new gene and work success in HTC8XXX
krazy_about_technology said:
@ankit360: Ya, it must be for old gene, never seen a ROM for new gene by pdaviet. And all their ROMs are protected so you wont be able to dump it. I donno why the person is so overprotective.
Click to expand...
Click to collapse
"PhamQuang" He's the manager of the forum site pdaviet.net ,may be that's why he is so overprotective.
see the link
http://pdaviet.net/showthread.php?t=42580
back to Original htc SPLASH
hksin1988 said:
Does This Rom change the boot screen...???
as last PDAviet Rom has "smart mobility" boot screen
anyone tried this Rom ??
please tell me Ram uses n memory , after installation.
is this slow ??
Click to expand...
Click to collapse
for back to Original htc splash you must use (htcRIE_0.4.0.51) for change splash.
1.extract htcRIE_0.4.0.51.zip and original_gene_splash and run htcRIE_0.4.0.51.exe
2.select GENE of phone list
3.go to file=>open and select (ruu_signed.nbh) of rom folder.
example:GENE_WM6.1__1_17_720_03__B20954 => ruu_signed.nbh
4.after open ruu_signed.nbh on software view SPLASH and EXTROM and OS.
5.select SPLASH and of menu select image=>delete file
6.again Double click on SPLASH and change (SPLASH.nb) of original_gene_splash file.
7.go to file=>save.
8.now again install rom on GENE.
@arnoo: hmm.. may be you are right. But i think he should share it with others. His ROM can serve as a good base for building other ROMs.
Anyways, can you tell me what language is this site pdaviet.com in? I was not able to translate it any way. And What is the status of Windows Live in this ROM, Is it Working?
just flashed it on my gene....quite stable and fast....its a lite version.....wid not much bundled applications....nice work mate !
@koolchief
hi
this is quite old i tried it around 1 month back if u want something with real great experience try sumits vanilamanila ultimate ud love it
kooolchief said:
just flashed it on my gene....quite stable and fast....its a lite version.....wid not much bundled applications....nice work mate !
Click to expand...
Click to collapse
@ZELALAT: I am success to back Original htc SPLASH. Thanks...
Regards
Nipun
ZELALAT said:
for back to Original htc splash you must use (htcRIE_0.4.0.51) for change splash.
.
Click to expand...
Click to collapse
@nipun
hi
remember my message to u can u detail me on the same
nipun_cse said:
@ZELALAT: I am success to back Original htc SPLASH. Thanks...
Regards
Nipun
Click to expand...
Click to collapse
@Hari: The process of "ZELALAT" in post#11 is easy, I think u can understand if u read that post. farther i explain again...
Remember: if ur SPLASH is original HTC, no need to change.
1. Please download the file from Post# 11 (i. htcRIE_0.4.0.51 and ii. original_gene_splash)
2.extract htcRIE_0.4.0.51.zip and original_gene_splash.zip and run htcRIE_0.4.0.51.exe
3.select GENE of phone list (then a window is open, cancel it.)
4.go to file=>open and select (ruu_signed.nbh) of rom folder. (that is, select ur rom file from ur computer, which rom's Splash u wnat to change)
5.after open ruu_signed.nbh on software view SPLASH and EXTROM and OS.
5.select SPLASH and of menu select image=>delete file (If there are no SPLASH file, u no need to delete)
6.again Double click on SPLASH and change (SPLASH.nb) of original_gene_splash file.
7.go to file=>save.
8.now again install rom on GENE. (that u changed)
Try it I think U can
I attach a different SPLASH file (not HTC Original SPLASH ) try to change it on ur GENE. good luck.
Regards,
Nipun
svrhari said:
hi
remember my message to u can u detail me on the same
Click to expand...
Click to collapse
it did not work for me
hi
well i tried it did not work for me its ok thanks anyway for trying to help
could it be because im using windows vista on my comp i
thanks again
nipun_cse said:
@Hari: The process of "ZELALAT" in post#11 is easy, I think u can understand if u read that post. farther i explain again...
Click to expand...
Click to collapse
can somebody upload or cooked Clean ROM WM 6.5 Atom Pure like Clean ROM 6.1 Hellowordl1..
I need one..
Here is your link....http://forum.xda-developers.com/showthread.php?t=360664
juliuscezar said:
Here is your link....http://forum.xda-developers.com/showthread.php?t=360664
Click to expand...
Click to collapse
There's nothing only 6.1 not 6.5
You can try this...
http://forum.xda-developers.com/showthread.php?t=515720
juliuscezar said:
You can try this...
http://forum.xda-developers.com/showthread.php?t=515720
Click to expand...
Click to collapse
Already tried, all roms from pdaviet by Khao Ha, it's not the clean one. he always customize his rom with his work or logo, on the other hand bluetooth and wireless not working well.
dolphinxda said:
Already tried, all roms from pdaviet by Khao Ha, it's not the clean one. he always customize his rom with his work or logo, on the other hand bluetooth and wireless not working well.
Click to expand...
Click to collapse
still waiting somebody cooked clean rom 6.5 like Hellowordl1 ROM, with original logo, working bluetooth and wireless...
miebasomurah said:
still waiting somebody cooked clean rom 6.5 like Hellowordl1 ROM, with original logo, working bluetooth and wireless...
Click to expand...
Click to collapse
I will post some Atom driver package so people can use my update f kitchen to build the ROM for atom. I hope it will work. But I can't test. I need someone to test.
Please watch closely to the main thread.
helloworld1 said:
I will post some Atom driver package so people can use my update f kitchen to build the ROM for atom. I hope it will work. But I can't test. I need someone to test.
Please watch closely to the main thread.
Click to expand...
Click to collapse
I'm willing to test if u release 6.5 for atom soon....
dolphinxda said:
I'm willing to test if u release 6.5 for atom soon....
Click to expand...
Click to collapse
I hope you can build it yourself. It is very easy to build. Replace oemdriver and run buildos.bat in windows. Copy diskimg.nb0 to your sd card and flash. You can post the problem if you build like this and I will try to explain.
helloworld1 said:
I hope you can build it yourself. It is very easy to build. Replace oemdriver and run buildos.bat in windows. Copy diskimg.nb0 to your sd card and flash. You can post the problem if you build like this and I will try to explain.
Click to expand...
Click to collapse
Thanks Master, but i don't have Atom 6.5 Kitchen, how can i replace ur atom driver?
New 6.5 ROM and Kitchen here:
If u just want to flash the ROM. Go to FLASH directory and copy the diskimg.nb0 to your SD card and do an update normally.
If u want to help me improving the ROM, you can use the Kitchen. I appreciate your help. If u want to do something your own, just do it.
I also include the XIP tools that you can port the XIP.
Hope this package is a great gift to you ALL.
Download here:
SYS based on SYS/XIP 21867, Stable TREE of the official releases.
Can i use with Kitchen above?
Pls Advice
Thanks
helloworld 1 ..please help Sensei...
Master helloworld ... please help me i want a 6.5 rom for my hardly earned atom i bought this lastnight secondhand because still student dont have enough money but i like ur rom do u have any 6.5 rom with procedures how to install - for my o2 Atom ? please help thanks master !
helloworld1 said:
I hope you can build it yourself. It is very easy to build. Replace oemdriver and run buildos.bat in windows. Copy diskimg.nb0 to your sd card and flash. You can post the problem if you build like this and I will try to explain.
Click to expand...
Click to collapse
Hi Helloworld1, i have download 651 kitchen as u release, just wonder something.
1. there is a disimg.nb0 in flash directory
2. copy-diskimg.nb0-to-this-directory-from-flash-directory in ROM directory
what can i do?
Can u pls give me a simple Readme file how to use that kitchen and OEM Driver that u attached.
Thanks in advance!
dolphinxda said:
Hi Helloworld1, i have download 651 kitchen as u release, just wonder something.
1. there is a disimg.nb0 in flash directory
2. copy-diskimg.nb0-to-this-directory-from-flash-directory in ROM directory
what can i do?
Can u pls give me a simple Readme file how to use that kitchen and OEM Driver that u attached.
Thanks in advance!
Click to expand...
Click to collapse
They are in the main thread http://forum.xda-developers.com/showthread.php?t=360664
There is an diskimg.nb0 in FLASH directory, copy it to the ROM directory, that's it.
To use the kitchen, you just run that bat file and follow steps and press the |> button when done, close the buildos window and wait until it gets done.
I have just attached atom's driver recently. Search the last few pages.
helloworld1 said:
They are in the main thread http://forum.xda-developers.com/showthread.php?t=360664
There is an diskimg.nb0 in FLASH directory, copy it to the ROM directory, that's it.
To use the kitchen, you just run that bat file and follow steps and press the |> button when done, close the buildos window and wait until it gets done.
I have just attached atom's driver recently. Search the last few pages.
Click to expand...
Click to collapse
Thanks for the explanation!
one more thing!
1. if i copy diskimg.nb0 from Flash and past in ROM directory, shall i still keep diskimg.nb0 file in Flash directory or delete?
2. How about the file that u rename copy+to+this+folder .... in ROM directory, still keep or delete?
3. OEMDriver that u attached is bigger than OEMDriver in Kitchen, is it OK ot replace it?
thanks in advance
Sorry for my English.
helloworld1 said:
They are in the main thread http://forum.xda-developers.com/showthread.php?t=360664
There is an diskimg.nb0 in FLASH directory, copy it to the ROM directory, that's it.
To use the kitchen, you just run that bat file and follow steps and press the |> button when done, close the buildos window and wait until it gets done.
I have just attached atom's driver recently. Search the last few pages.
Click to expand...
Click to collapse
Hi Helloworld1 while OS Build is ruining there is an error like this
pls help...
hi helloworld1
is the bluetooth driver fix?
dolphinxda said:
I'm willing to test if u release 6.5 for atom soon....
Click to expand...
Click to collapse
like dolphinxda... i will be a voluntier to test your clean 6.5 rom.
i just a newbie, to many risk for build a kitchen ROM without enough knowlledge.
so will waiting for someone build ROM 6.5, upload, and i will test to report...
Master Helloworld1!
Successfully built the new rom!
Downloaded the Kitchen,used WinRAR to extract 651, copied diskimg.nb0
to ROM folder,replaced the OEMDrivers folder in OEM,run the bat file,
enter |> in Build OS, when done closed Build OS and allowed cmd to complete.
The new rom is in the Flash folder..
Testing now...
Hard Reset twice. Oh! I love this! 6.5 Professional CE OS 5.2.21867(Build 21867.5.0.68) on my Atom!
Will complete testing and report later
Thank you.
Yeaaah.. Glad to hear that mns123 !!
mns123 said:
Master Helloworld1!
Successfully built the new rom!
Downloaded the Kitchen,used WinRAR to extract 651, copied diskimg.nb0
to ROM folder,replaced the OEMDrivers folder in OEM,run the bat file,
enter |> in Build OS, when done closed Build OS and allowed cmd to complete.
The new rom is in the Flash folder..
Testing now...
Hard Reset twice. Oh! I love this! 6.5 Professional CE OS 5.2.21867(Build 21867.5.0.68) on my Atom!
Will complete testing and report later
Thank you.
Click to expand...
Click to collapse
Yeaah, i glad and very happy to hear that mns123. and it will be more great and kindly please soon upload your very new 6.5 Professional CE OS 5.2.21867(Build 21867.5.0.68).. i would like to try it also..i am really wanna give it try for the new ROM for our beloved atom. and all testing i will report it immediately..^^ pleaaasseeeeeee mns123..my atom is very available to try it.. the new 6.5 O2 XDA Atom. Thank you before.
After testing, some problems:
Cannot install any applications. Network connections(GPRS) not configurable/not working
SMS cannot send, Activesync not working.
Do we have to use any ExtendedROM?
Thanks.