Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
Right, This is the basic Hard-SPL package; if you already have applied Hard-SPL with the unlocker then DO NOT BOTHER TO USE THIS PACKAGE.
This program is now foolproof as the SPL is flashed directly from the bootloader rather than from the OS so there's no opportunity for anything to go wrong.
for this to work, your device MUST BE RUNNING WINDOWS MOBLE and MUST BE SYNCED WITH THE PC.
to recap: IF YOU ALREADY HAVE 1.20/1.25, DO NOT USE THIS.
Thank you! I won't be waitin', though...
Whatever Trevor.
laikos said:
Hi I'm trying to downgrade to Hard SPL 1.1olipro to try to restore Factory SPL (Hoping that it will fix my WLAN Dead issue) however I can't seems to downgrade from IPL 1.04 + SPL 2.10.0lipro
I've followed the instruction from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
and I keep getting [error 260] Anyone knows how to get around this?
Thanks
Click to expand...
Click to collapse
it WILL NOT fix your dead WLan.
secondly, don't start spamming other threads by crossposting. Idiot.
Olipro said:
it WILL NOT fix your dead WLan.
secondly, don't start spamming other threads by crossposting. Idiot.
Click to expand...
Click to collapse
With all due respect I don't mean to SPAM neither crossposting, anyway I've make mistake by putting the device in Bootloader mode when I'm trying to downgrade the SPL. Yea I figured out it will NOT FIX the Dead WLAN either. Sorry for the inconvience
How do I go backward on my SPL
I upgraded to SPL 2.10, but my touch screen keeps failing, I f I leave the battery out for 30 min to an hour the touch screen works for about 30 min then goes touchless. I need to go back is it possible.
DRACO00 said:
I upgraded to SPL 2.10, but my touch screen keeps failing, I f I leave the battery out for 30 min to an hour the touch screen works for about 30 min then goes touchless. I need to go back is it possible.
Click to expand...
Click to collapse
The SPL has nothing to do with it.
Also, this is the Athena forum, so piss off.
DRACO00 said:
I upgraded to SPL 2.10, but my touch screen keeps failing, I f I leave the battery out for 30 min to an hour the touch screen works for about 30 min then goes touchless. I need to go back is it possible.
Click to expand...
Click to collapse
Take out the plastic cover and THEN try ))) I kinda keep hearing that a lot and this "fix" fixed a lot of those...
AThena broken, any help ???
Problem_Description: Hello,
My Athena bought since last may si out of order because i ve tried to install english rom for WM6 instead of the french one !!!.
I realise that a big mistake but how can i make it starting again, it's blocking in the wm6 upgrade screen ???
I ve tried to make hard reset to restore default parameters but no resultat and the original rom is dammaged and however has erased.
MS activsyn can'nt connect to the device because of no wm system is reconized ....
I'm waiting for your help because I can't work without Athena !!!!
Nothing work (tried soft reset or hard reset) but only a 3 colors screeen and no more ...
I m reelly sad and i'm wainting for your help.
Olipro said:
OK... just to make this clear.
Go to the Athena forum and download the unlocker; do Step 1 to flash Hard-SPL.
after that you can close the program if you don't need to unlock.
if I come out with new releases of Hard-SPL, the package will be posted here.
Click to expand...
Click to collapse
Have you used Olipro's unlocker before?
All theree steps ?
Can you enter the Bootloader Mode?
hey olipro! nice work i have a htc advantage x7500 and i try to hard spl it but it's not working!!! at the Step 1 when the cab was copied to the device i've installed it but my device was working and it hadn't gone idle!!! what can i do now? could you help me?
oh GOD i think i brick my device!!! i install RUU_Athena_DOPODASIA_WWE_2.19.707.4_1.45.00.10_Ship without doing any of the steps and now it's like this can anyone hel me????
Unlocker for x7501?
Is this unlocker suitable for the x7501 WM6 unit as well? Also do you still need to flash the SPL on the x7501?
Lastly what is "SPL" and why can you brick your device if you don't carry out this upgrade?
simonsalo said:
Is this unlocker suitable for the x7501 WM6 unit as well? Also do you still need to flash the SPL on the x7501?
Lastly what is "SPL" and why can you brick your device if you don't carry out this upgrade?
Click to expand...
Click to collapse
try reading around to find out. or did you think I was bullshitting. I'm struggling very hard not to insult you for your laziness.
Advantage Problems
-----------------------DO NOT USE UNLOCKER ON UNLOCKED HTC 7501 ADVANTAGE ------------------
Oli,
I have (had) a brand new unlocked 7501 Advantage. I followed your unlocker advice above to do step 1 very carefully and now have a bricked device after I saw the same error trying to backup my SPL file like others. Can you place a big bold warning on your SPL Flash link so that other people may not see the same fate...from reading the comments on this thread we are lead to believe that you suggest that we should flash to your SPL before trying a cooked ROM on the 7501 Advantage...
TIA
-Lol! Some big Advantage, now Im out 900 bucks !
photon2 said:
Oli,
I have (had) a brand new unlocked 7501 Advantage. I followed your unlocker advice above to do step 1 very carefully and now have a bricked device after I saw the same error trying to backup my SPL file like others. Can you place a big bold warning on your SPL Flash link so that other people may not see the same fate...from reading the comments on this thread we are lead to believe that you suggest that we should flash to your SPL before trying a cooked ROM on the 7501 Advantage...
TIA
-Lol! Some big Advantage, now Im out 900 bucks !
Click to expand...
Click to collapse
If you can get to bootloader, there might be hope yet. Follow this solution , if you can
http://forum.xda-developers.com/showthread.php?t=326953
Still no luck- been trying all day but nothing - not able to see anything except red LED lit up around the joystick when I am on AC and the battery is removed.
I am going to try warranty repair but probably am out of luck
photon2 said:
Still no luck- been trying all day but nothing - not able to see anything except red LED lit up around the joystick when I am on AC and the battery is removed.
I am going to try warranty repair but probably am out of luck
Click to expand...
Click to collapse
Are you able to get into bootloader? If I read correctly the answer should be no but I wanted to confirm either way. If no, how have you tried to get into bootloader? Key sequence in other words? Have you removed the SD card also?
You are correct, I cannot seem to get into the bootloader or even get the device to come alive at all. I tried camera + reset, volume down + reset, volume down + camera + reset, I looked all over the forum and found a few others but still no luck. All I see is the red LED around the Joystick either become solid lit (without battery in and on AC) or blink lit (with battery in and on AC). The light stays solid lit with battery out and all key combinations tried and does the quick blink lit with battery in and all key combinations as long as reset is pushed. Basically, it would seem that the reset key is working by resetting the circuit to the battery but the device just wont boot up.
I will be sending this unit back anyway due to a manufacturing defect of the SD card slot. When this particular unit was built, I guess no one actually checked to see if the a (mini not micro) SD card fits in, cause IT DON'T!! The slot was missed by about 2mm being to narrow in width...GEESH!!
I am not too happy with hardware of the 7501 right now and probably will look at getting the 7500 or Dopod version for "cooked ROM" pleasure but my advice to others reading this would be to not run out and get the 7501 at the lower price given the problems I am seeing. However, on a positive note, the few hours I did get the 7501 running, it was a blast and I still give the overall performance a 4.5 out of 5 star rating being the most complete and fastest PDA Phone I have had the pleasure to work with.
photon2 said:
You are correct, I cannot seem to get into the bootloader or even get the device to come alive at all. I tried camera + reset, volume down + reset, volume down + camera + reset, I looked all over the forum and found a few others but still no luck. All I see is the red LED around the Joystick either become solid lit (without battery in and on AC) or blink lit (with battery in and on AC). The light stays solid lit with battery out and all key combinations tried and does the quick blink lit with battery in and all key combinations as long as reset is pushed. Basically, it would seem that the reset key is working by resetting the circuit to the battery but the device just wont boot up.
I will be sending this unit back anyway due to a manufacturing defect of the SD card slot. When this particular unit was built, I guess no one actually checked to see if the a (mini not micro) SD card fits in, cause IT DON'T!! The slot was missed by about 2mm being to narrow in width...GEESH!!
I am not too happy with hardware of the 7501 right now and probably will look at getting the 7500 or Dopod version for "cooked ROM" pleasure but my advice to others reading this would be to not run out and get the 7501 at the lower price given the problems I am seeing. However, on a positive note, the few hours I did get the 7501 running, it was a blast and I still give the overall performance a 4.5 out of 5 star rating being the most complete and fastest PDA Phone I have had the pleasure to work with.
Click to expand...
Click to collapse
Man that sucks. Seems like you've tried the correct combination of keys to get into bootloader...just make sure you were pressing that camera button firmly because it's known not to take unless you do this.
What operating system is on your computer BTW? Windows XP/Vista?
I'm not sure I understood the problem with the SD Card. Do you mean to say that when you tried to put in a mini-SD card (not Micro), it wouldn't fit into the slot?
Hey guys!
I know this topic really dosn't belong here, but i know that the guys in this forum has much knowlegde so i am trying here!
I have this HTC Hurricane phone, and yes i have asked there but no one seems to be able to help, and then i wanted to flash WM6 on it. For that i needed another SPL, which i got from there and flashed it. The flash it self went fine
But for some reason now, the Hurricane can't do anything at all. I can't turn it on normally i just get a white screen after about 10 seconds after i press the power button. The same happens when i try to get to the bootloader (!), all i get is a white screen after about 10 seconds of nothing. When the device shows me this white screen i also can't get it to connect with my PC! The computer dosn't see it at all, not just active sync, but i do not get that windows xp sound when i plug in a usb device.
So, what can i do? Is this a really good example of a bricked device or what?
I hope you guys will accept that i write here. The Hurricane forum is as good as dead, and i know you guys here for your expertise!
~D
I think JTAG or similar or replacing hardware (DOC Module) might save it, but I don't think there is anyway to flash through USB without the bootloader working...
l3v5y said:
I think JTAG or similar or replacing hardware (DOC Module) might save it, but I don't think there is anyway to flash through USB without the bootloader working...
Click to expand...
Click to collapse
okay that was what i thinking too.. well since i got it very cheap i don't think i will spend any money on such operation.. i guess its quite many money?
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
Note that the prompt only comes up for a few seconds and then it will continue to enter the bootloader.
Click to expand...
Click to collapse
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
l3v5y said:
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
Click to expand...
Click to collapse
Iam lucky for that couse i actually have another hurricane that works! Thank you i will try this on friday or saturday and write back the status.. I hope you will check back..
Iam glad i can allways count on the people in here!
unbrick it
http://forum.xda-developers.com/showthread.php?t=292667
try the alphazero solution =) !!!!
l3v5y said:
Just seen this: http://wiki.xda-developers.com/index.php?pagename=Prophet_Rom_Dump
The end of it implies that you can load a ROM from the storage card BEFORE bootloader kicks in.
Not sure if this will work on a Hurricane but it might with some modification and a working device :s
Click to expand...
Click to collapse
I have just tried the method. But still i do not get anything, but i white screen. I checked that my ROM dump worked by the other phone. It does ask me if i want to install the rom, but on the bricked one, i do not get anything just that white screen
Guess thats it?
Then I think it is a good example of a bricked phone...
G4 rom dump?
Hi xda-members,
I wanted to know if it's possible to backup and restore a G4 device. On the wiki, it says i need a CID unlocked device.
I think if you hardSPL your device, it should be fine (HardSPL circumvents the CID checking procedure).
l3v5y said:
I think if you hardSPL your device, it should be fine (HardSPL circumvents the CID checking procedure).
Click to expand...
Click to collapse
Ok, on another tread. They said if you got an error while backing up you have a CID locked device. And i already have created a backup. So i think it should be fine.
i just bought my hd2 fromt-mobile and naturally couldn't resist but to modify it
So i installed and flashed the HSPL2 with no problem it worked perfect and very fast and easy....and i installed Mesus Rom and love it did my registry tweeks got the phone running awesome!!!
Now i woke up early was browsing on htcpedia and glanced at the new DOPOD version radio.... well..... it installed fine no errors but when it got to 100% to reboot BLACK SCREEN. I've tried getting the phone into bootloader mode nothing, tried a master reset holding down the volume up and down at the sometime and press power nothing, i've tried to plug it in the computer it recognizes it my computer makes the connected to a device noise but when it goes to initialize the hd2 i get this driver error:
Qualcomm CDMA Technologies MSM failed.
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
the radio i flashed that caused this was 2.051.03(DOPOD)
poulosjr said:
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
Click to expand...
Click to collapse
I hope so for your sake, however... When you say you have a HD2(T-Mobile), do you mean the US one?
Flashing guide for TMOUS HD2 states:
mskip said:
PLEASE READ ALL THE INFORMATION IN THIS GUIDE BEFORE INSTALLING HARDSPL OR FLASHING A ROM/RADIO. IF YOU FLASH AN INCOMPATABLE ROM OR RADIO ON THE 1024LEO THEN THERE IS A POSSIBILITY OF BRICKING YOUR DEVICE SO PLEASE BE VERY CAREFUL!!
Click to expand...
Click to collapse
poulosjr said:
the radio i flashed that caused this was 2.051.03(DOPOD)
Click to expand...
Click to collapse
Is that this one (2.09.51.03)?
Says in the post there it doesn't support 576MB RAM. That would probably mean it's not compatible with the TMOUS HD2. I vaguely remember that being the case for any version with 51 in it.
Sorry to be completely unhelpful here, but I wouldn't have a clue on how to revive your HD2.
Perhaps people in the TMOUS HD2 Flashing guide thread might know something?
----
meptik
chalk another non-starter up to a ..51.. radio on a tmous phone.
still not seen a fix
is the tmobile us hd2 recoverable or is it bricked out?
sorry, not sure. see other threads HERE (post three) and HERE , , it's also mentioned in the mtty and the HSPL (regular HSPL and tmous HSPL) threads.
As far as i can gather so far, roms below 2.10 cause not to boot, but can recover from bootloader, radios with a ..51.. in them cause it not to start at all. (because ..51.. radios don't support the 576mb, presumeably)
Best of luck.
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
brandon2004 said:
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
Click to expand...
Click to collapse
sounds more like a dodgy phone than a bad flash. wait for stock and get it exchanged.
bricked
I have the same problem. I just wanted to go back to stock rom and i downloaded this bull crap rom
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship.exe
BRICKED MY TMOBILE USA HD2!!! DO NOT LOAD THIS ROM!!!!
took it to the tmobile and i now have to wait till tomorrow for them to get more in stock... im pissed!!!
sk8er982 said:
im pissed!!!
Click to expand...
Click to collapse
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
i am...
samsamuel said:
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Click to expand...
Click to collapse
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
they need to remove the .51 versions, i just bricked mine and all i saw really was to not install it, not that it would completely brick it. I'm really upset.
donalgodon said:
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
Click to expand...
Click to collapse
I hope that was sarcasm LOL
sk8er982 said:
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
Click to expand...
Click to collapse
That info is still in the same thread that y'all should have read before bricking your HD2's. Many (and I mean many) of us flash our HD2's all the time, run ROM's custom built to even let us run the latest and greatest Android builds available.
When you and the OP (iirc) get some fresh HD2's, read the info and links in the stickies here. There's enough info in those to get you well on your way to mastering your HD2's destiny.
Best of luck.
So true. ALL chefs always warn ab NOT flashing .51 radios on TMOUS HD2 or they posting links to HOW TO FLASH TMOUS HD2.
Dont rush with first flashing! Thats the best way to brick ur phone!
Always read the forum! Thats the bast way to make ur phone happy
htc hd2 after installing andriod
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
sherko_bax said:
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
Click to expand...
Click to collapse
it is tmous yes? it sounds like he flashed a bad radio,
If that is the case, i would be MAD AS HELL and demand they pay for the replacement of teh motherboard.
I have this HTC HD2 and after i flashed a stock Rom and updated my rom again this occurred. Every time I turn on the Phone I am stuck at the Boot loader screen and I have no way to reverse it. My SPL states that I am on 3.03 but there are certain numbers missing from the top of the screen. I have tried to flash the Rom many times after and every time it reaches 2% the phone restarts and i get invalid Vendor ID, please see the screenshot. Thanks
my most important question is if the Phone is bricked and nothing can be done
Could have been a bad flash indeed.
But, the good news is that in most cases, as long as you get into the bootloader, you can get in working again.
"Invalid vendor ID" means that the ROM you tried to flash was not made for your HD2. In case you have a branded device, you must flash the ROM which was made for your operator, if it´s a free device, you must flash an HTC ROM.
You now need to find the proper ROM for your device and flash it through the SD card method, this will re-flash SPL as well.
im afraid this issue has come up a few times (only 2 or 3 that ive noticed) and is not fixable. there are a couple of threads where people have posted pics of bootloaders with those missing/strange characters and it seems to be unfixable and occur for an unknown reason..... sorry.
jtag may resolve the issue if your able to find a way having it done
conantroutman said:
im afraid this issue has come up a few times (only 2 or 3 that ive noticed) and is not fixable. there are a couple of threads where people have posted pics of bootloaders with those missing/strange characters and it seems to be unfixable and occur for an unknown reason..... sorry.
jtag may resolve the issue if your able to find a way having it done
Click to expand...
Click to collapse
In another thread, a few other users succeeded with this:
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
Click to expand...
Click to collapse
But only with some other previously unseen data in the bootloader...
Maybe this still helps here.
tictac0566 said:
In another thread, a few other users succeeded with this:
But only with some other previously unseen data in the bootloader...
Maybe this still helps here.
Click to expand...
Click to collapse
good find! I didn't see that one, hope it works.
thanks for the info. will update you as soon as I try all those methods. the only thing is i believe that i haven't try the SD card method will update.