Related
Just got a X01HT after Dec, version is 1.09. After reading all these threads, is it possible to use "DownGrade_SPL.rar" downgrade to 1.04 as I know sim unlock is still not available yet, just want to use chinese rom instead..........
Thks,
hi there,
please reaqd the wiki and the sticky threads on this board, the solutions ar eposted there.
cheers,
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
mj13 said:
i need to make it super CID before that??
Click to expand...
Click to collapse
yes, you are right.
riderhk said:
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
Click to expand...
Click to collapse
Just tried flash it to HK rom and it worked....
mj13 said:
Just tried flash it to HK rom and it worked....
Click to expand...
Click to collapse
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
wiccawaiwai said:
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
Click to expand...
Click to collapse
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
qtotter said:
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
Click to expand...
Click to collapse
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
riderhk said:
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
Click to expand...
Click to collapse
is your bootloader 1.04?
mj13 said:
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
Click to expand...
Click to collapse
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Thank you vey much.
qvik123 said:
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
qvik123 said:
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Click to expand...
Click to collapse
If its pre December 2006 yes, if it's post December 2006 no.
qtotter said:
is your bootloader 1.04?
Click to expand...
Click to collapse
yes, already downgraded to 1.04.
Would you mind try to upgrade the rom again? If it doesn't work, please let us know
Hi,pof!Thank you very much for answering my question on the 1.09 to 1.04 topic.But I still got some questions.In the link you gave me it says I can not downgrade my bootloader unless I go to the IMEI something website and pay some dollars.Is that the only way to downgrade my bootloader?
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Sorry to bother you.Hava a good day!
Sorry to post it again after giving you a private message.
qvik123 said:
Is that the only way to downgrade my bootloader?
Click to expand...
Click to collapse
Legally yes, as you have SPL-1.09 now.
qvik123 said:
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Click to expand...
Click to collapse
Yes, because softbank 1.14 radio doesn't allow to be upgraded even if you flash another ROM this radio will be kept in your device.
Ok so I have a little problem with the whole 1.09 -> 1.04 thing.
I have been searching for a couple days or so and gathering some information about it, but I don't think that anyone has had my problem yet. I have a pre-Dec. x01ht, and I stupidly upgraded to 1.09 (don't ask why; I'm still kicking myself). So after trying to downgrade with a couple different versions of the 1.04 provided here with no avail, I found the downgrade_spl file that has been floating around. Each time I keep getting the same problems.
When I active sync with my computer and start the downgrade (upgrade?) process i get past the first preliminary check with the phone and when it jumps to the second check, the phone resets into the tri-color screen for about half a second, and then a white upgrade looking screen. after that the phone checks itself and everything says "ok", but it never resyncs with the computer. The computer stays on the screen that would show a progress bar, but after it hangs there it gets an error screen. i also tried doing everything from the boot mode (the tri-color menu), and that also gets an error. when i try from the boot mode, the both of the progress bars start, but before either go anywhere they both the computer screen comes up with an error in the program. it asks me if i want to recover or view the file, and recover also doesnt work.
Has anyone else had this problem, and if so how did you go about solving this dillema?
Ohh yeah baby,
It's been done. They havn't said it has been done, but I assume that it has since I have checked their sice a couple times a week for the past couple of months just waiting for something to be said. They have removed the message about Softbank phones being unable to unlock. So I "ASSSUME" that you can now fully crack your phone with Softbank v1.09. Also for the simle fact that it is version 4 http://www.imei-check.co.uk/M3100v4Unlock.zip of their software instead of version 3. So, now we can crack, our X01HTs, we can downgrade to 1.04, flash with a English rom, then downgrade again to 1.01 and then flash with our custom splash screens.
Imei-check has cracked post December Softbank phones.
www.imei-check.co.uk
-Joe.
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Success!!
I tried as soon as I saw this post, I had previously bought the IMEI thingy (technically speaking) and realized that my phone was a post Dec. (I originally thought I got it in November, but I realized that I was just an idiot)
anyways a couple minutes later I'm using my Docomo Card on my unlocked Softbank phone.
I'm not gonna lie, it was well worth the $40.
Now, I am not sure if my mail is working. So you guys have any idea about the Docomo mail if that works or not on the Hermes?
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
keiuchid said:
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
Click to expand...
Click to collapse
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i meant "this problem is not coze of UK IMEI Unlocker", it will be happen on another hermes too)
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Asukal said:
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i didnt mean this probelem is not coze of UK IMEI Unlocker, it will be happen on another hermes too)
Click to expand...
Click to collapse
Thank you your attention.
I don't flash other rom, only use unlocked this.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
I also have the same situation, will it be able to unlock if mine is downgraded to 1.04 and flashed HK rom.
doitfu said:
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
Click to expand...
Click to collapse
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
keiuchid,
Same here. I don't understand what the process is. If "they" means imei-check and if you have their written response on the process, please copy that and paste it in your reply here. It doesn't matter if it's long.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
mj13 said:
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
Click to expand...
Click to collapse
It's ok , i have bought the unlocker,it absolutely works on my X01HT.so i enjoy it now.
qtotter said:
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
Click to expand...
Click to collapse
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
keiuchid said:
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
Click to expand...
Click to collapse
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
doitfu said:
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
Click to expand...
Click to collapse
I also can not do.
My x01ht is before 12.2, so can not do ?
mj13 said:
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
Click to expand...
Click to collapse
It finally succeeded.
Thanks a lot.
Hi all.
My Softbank has b/l 1.04 and the 1.14.00.10 radio on it. To use this method,which rom do I use for the 1.09 b/l? I looked at wiki,and the only one was a Japanese version for softbank. It does not match my Softbank, so I am not real sure which way to go. Is there a Dopod rom with the 1.09 b/l?
BTW.....My Sb is an HERM200 with the Dopod splash screen and was shipped with the Dopod 1.23.707.4 WWE Rom, IPL 1.01,B/L 1.04, and the dreaded 1.14.00.10 radio on it.
Thanks................Later
From HTC 7500 (de) to U1000(CHT), use rom is U1000ROMcode_DOPODTW_070320.exe.
the device will always boot in three-color mode
cwmaster said:
From HTC 7500 (de) to U1000(CHT), use rom is U1000ROMcode_DOPODTW_070320.exe.
the device will always boot in three-color mode
Click to expand...
Click to collapse
why can't you read the post before you flash the device, it won't work, and you risk yourself of brinking your device. Solutions is on the forum, use the search....
hello sir, I look with "Athena goes wiki ", but not info for that, could you help me to find or tell me how we can do? thanks.
cwmaster said:
From HTC 7500 (de) to U1000(CHT), use rom is U1000ROMcode_DOPODTW_070320.exe.
the device will always boot in three-color mode
Click to expand...
Click to collapse
Remove the miniSD card! I had the same problem
now I get CID back, but how to change the CID to Super CID? If not, the rom doesn't be upgraded.
RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
I tried to update my dutch T-Mobile Ameo with the rom RUU_Athena_HTC_WWE_1.25.405.2_1.38.00 and got at first the connection problem on the device, and after I removed the SD Card the same error 294: Invalid Vendor ID.
this problem is HTC 7500's CID not super CID, so if want to upgrade, we must have the tools to unblock the CID.
cwmaster said:
this problem is HTC 7500's CID not super CID, so if want to upgrade, we must have the tools to unblock the CID.
Click to expand...
Click to collapse
and if you have read though the forum, then you know there is no tools to make your device super CID, there is no tool to unblock it. you must return to original ROM.
wu5262 is correct. There is currently no way of making the Athena superCID. No one, to our knowledge, has posted the utility yet. Careful guys with trying to upgrade. You might brick your phone and have an expensive paper weight if you're not careful. Not all files/posts are from reliable sources, etc. Not saying the poster is not reliable but sometimes there is not enough information for everyone's use.
ltxda said:
wu5262 is correct. There is currently no way of making the Athena superCID. No one, to our knowledge, has posted the utility yet. Careful guys with trying to upgrade. You might brick your phone and have an expensive paper weight if you're not careful. Not all files/posts are from reliable sources, etc. Not saying the poster is not reliable but sometimes there is not enough information for everyone's use.
Click to expand...
Click to collapse
Yeah..totally agreed..i have tried with various roms and unlocking software availabe but none is usefull..
so for conclusion..at this time do not risk yourself to flash with other rom as it will brick your phone...
cheers...
agree with you, ant thanks, I will wati for the unlock
unlocking Athena
ahmadfarid said:
Yeah..totally agreed..i have tried with various roms and unlocking software availabe but none is usefull..
so for conclusion..at this time do not risk yourself to flash with other rom as it will brick your phone...
cheers...
Click to expand...
Click to collapse
Have you tried olipro cid unlock? Since I unlocked my Athena with this software I haven´t had any trouble when instaling roms that showed "unvalid vendor id" before each time tried of upgading wm6 from developer's to the wm6 recently offered from HTC Asia.
famsanr said:
Have you tried olipro cid unlock? Since I unlocked my Athena with this software I haven´t had any trouble when instaling roms that showed "unvalid vendor id" before each time tried of upgading wm6 from developer's to the wm6 recently offered from HTC Asia.
Click to expand...
Click to collapse
Old message...check the post date.
I found the way!
Get the Hard-SPL and install it... ANd Voilâ!!!! Ur last OS again...
get it
http://forum.xda-developers.com/showthread.php?t=296722
Well I being stupid person that I was loaded Faria's rom without unlocking my G4 it got to 99% and errored saying update error and such. So i did some research finding out that I had to unlock first, now after reaidng some tutorials I see things about uploading the EnableRapi to my 8125 but problem is when I turn it on it only has the rainbow colors I can't get in to the phone and I can't use it..
Could anyone please help me and guide me or paste me a thread on how I can fix this. I've been researching for hours and haven't gotten anywhere. If anyone can please help me itll be greatly appreciated.
Thanks
All you have to do is put your phone in bootloader mode then flash wizard love or the rom that your device was shipped with.
You havent told us what wm5 rom your device originally had on it so we cant help you there but Wizard Love can be found here and here.
peter petrelli said:
All you have to do is put your phone in bootloader mode then flash wizard love or the rom that your device was shipped with.
You havent told us what wm5 rom your device originally had on it so we cant help you there but Wizard Love can be found here and here.
Click to expand...
Click to collapse
i've installed farias o1st wm6 rom on my g4 device using the shelltoll method..
i wanted 2 try nother wm6 rom
do i have 2 go thru the entire unlock process again or just use the shell tool with the new rom
ok
u hav 2 go thru the unlocking CID process again & everytime u want 2 reflash
Cingular 8125 G4
All seems to be working back to normal question though using the shelltools it doesn't display all the information about the phone when I press Get Info, i have a 2.x.0001 but when I press get info it wont show the info on CID or the option below it, but itll allow me to Extract OS, is that okay? or do if I flash it, it won't work?
aurfawce said:
All seems to be working back to normal question though using the shelltools it doesn't display all the information about the phone when I press Get Info, i have a 2.x.0001 but when I press get info it wont show the info on CID or the option below it, but itll allow me to Extract OS, is that okay? or do if I flash it, it won't work?
Click to expand...
Click to collapse
Unless the person who converted the 80040000-OS.nb to nk.nbf filled in those fields then they will be blank. Dont worry about these details. Flash away.
Good Luck
G4 help
so i tried flashing it I thought it was successful I did the hard reset after I ran the ShellTools. Was I supposed to do anything after the hardreset? Because I though then maybe I can go on to trying Faria's stuff but when I did got to 99% and 302 error occured so now im flashing back to old ROM, any hints? tips? or programs to make the G4 unlocking easier? any or maybe any roms out there you know of that won't mess with the SPL/IPL that I can just load the rom and use it?
Thanks
aurfawce said:
so i tried flashing it I thought it was successful I did the hard reset after I ran the ShellTools. Was I supposed to do anything after the hardreset? Because I though then maybe I can go on to trying Faria's stuff but when I did got to 99% and 302 error occured so now im flashing back to old ROM, any hints? tips? or programs to make the G4 unlocking easier? any or maybe any roms out there you know of that won't mess with the SPL/IPL that I can just load the rom and use it?
Thanks
Click to expand...
Click to collapse
So you tried to flash Faria's rom to a CID locked G4 then when that didnt work you used shelltool. Following this you tried to flash Faria's rom to your still CID locked G4 and it didnt work again?
I'm a bit confused so I'll start at the beginning again. If you do in fact own a G4 CID locked device then the only way that you can upgrade your OS is to use shelltool, unless you want to pay imei-check to unlock it. Using the RUU method to update a CID locked G4 will produce an error and not finish flashing or it will complete the flashing process but your OS will not have changed.
Shelltool doesnt unlock your device, it will still be CID locked after shelltool completes. Shelltool only updates OS so the chance of bricking your device is minimal. Hope this helps.
All,
I downloaded the original Cingular/ATT Rom, just in case, and bought Sprite and backed up my settings. I downloaded SDA_ApplicationUnlock.exe and ran it (from my PC, is this correct?). SDA_ApplicationUnlock.exe seemed to run okay, and gave me the message "SDA Successfully unlocked, Please Reboot SDA Now!". I rebooted my phone and did not notice a change (I assume I should?) I ran the Rom update for WM6.1 Standard, which opened up a DOS-looking box that stayed there forever and did not indicate it was doing anything. After just over an hour I disconnected my phone and rebooted it, no change.
My questions:
1) Do I run SDA_ApplicationUnlock.exe from my PC or from the WM phone itself?
2) Any suggestions as to what I may be doing wrong?
3) What does CID Unlock do, and do I need it?
Just to review, I have a Cingular 3125 with WM5, and I want to go to WM6.1 Standard.
Please help! Thanks!
Frank
geekzilla65
You were supposed to run Jump SPL on your phone which puts it into a special bootloader then run the update utility should run correctly. I personally prefer the MicroSD flash method myself.
Jump SPL?
icecube57 said:
You were supposed to run Jump SPL on your phone which puts it into a special bootloader then run the update utility should run correctly. I personally prefer the MicroSD flash method myself.
Click to expand...
Click to collapse
Thanks icecube57!
I know that SPL files were copied to my phone automatically when I ran Rom updater, but I don't think it ever launched. I am really confused about the CID unlock. I read one post where it says I have to do this, and another that says for Cingular Roms you don't need to.
Also, you mention the MicroSD flash method - is there a post here that explains how to do that? I would not mind trying it if you think it works better. Please help!
Frank
geekzilla65
If i dont say it someone else will. Please use the search function.
If the utility didnt automatically launch the Jump Spl program then navigate to the root of your phone using file explorer start it manually from your phone and it will put the phone into bootloader then try running the utility again. Thats how i had to do it with my phone
Thanks
icecube57 said:
If i dont say it someone else will. Please use the search function.
If the utility didnt automatically launch the Jump Spl program then navigate to the root of your phone using file explorer start it manually from your phone and it will put the phone into bootloader then try running the utility again. Thats how i had to do it with my phone
Click to expand...
Click to collapse
Okay, that's fair, thanks. Can I get an answer on one more thing? I did look in the forums, in the Wiki ,etc. on this - I am still confused on what CID unlock is. I really don't want to brick my phone. When this worked for you, was this on a Cingular 3125? Did you have to CID unlock?
Frank
geekzilla65
What you are talking about permenantly CID unlocks the phone which allows you to flash any rom. Instead of being stuck with carrier specific roms. What the JUMP SPL does is loads a specially modified bootloader that temporarily fakes the Update Utility into thinking your phone is CID unlocked that way you can flash any rom without going through that long complicated process in making it permenantly CID unlocked. I have a 3125 myself and flashes all the roms in this forum fine with the Jumps SPL Bootloader method.
MicroSD Flashing
Im feeling nice. Here is the MicroSD Flashing Method
http://forum.xda-developers.com/showthread.php?t=311232
Thanks!
icecube57 said:
What you are talking about permenantly CID unlocks the phone which allows you to flash any rom. Instead of being stuck with carrier specific roms. What the JUMP SPL does is loads a specially modified bootloader that temporarily fakes the Update Utility into thinking your phone is CID unlocked that way you can flash any rom without going through that long complicated process in making it permenantly CID unlocked. I have a 3125 myself and flashes all the roms in this forum fine with the Jumps SPL Bootloader method.
Click to expand...
Click to collapse
Thanks icecube57!!! I really appreciate the answers! You rock!
Frank
geekzilla65
Thanks!
icecube57 said:
Im feeling nice. Here is the MicroSD Flashing Method
http://forum.xda-developers.com/showthread.php?t=311232
Click to expand...
Click to collapse
Thanks for this one too! Awesome!
Frank
geekzilla65