Well, I've searched the forum and I see where WM5 users have a hack to get BB on their Athena devices.
Is there a hack, or program mod to get BB on Athena with WM6? I've got a copy of the BB program. It tries to connect and something isn't allowing it.
Can someone point me in the right direction please? I need to get this working and I am a student and work full time. I'll be glad to contribute to your paypal fund. HELP.
I'm working on it. Stay tuned.
OK, got it working with AP Dual 3.0 by PK.
You have to do the following:
- Use a Hex-Editor and open the .nbh file from the update package
- Find the Text Unicode String: HTC-Athena and replace it with HTC-Hermes
- Find the follwing hex string:
1E3DA0E30D3083E3452FA0E30510A0E302 which means OS Version 5.2.1933
and replace it with the following hex-string:
4D3EA0E3063083E3452FA0E30510A0E302 which results in OS Version 5.2.1238
- Flash this to your Athena
- After boot use a registry editor and go to HKLM->System->Versions and change the vlue of Aku from .0.7.0 to .0.2.3
- Install Blackberry Connect Versionb 4.0.0.92 and go through the setup
- You're done, should work now
If some has webspace I can upload a fully modified version of the .nbh file.
Cheers
Is there a way to patch the official WM6 release from T-Mobile D? It comes as an exe File. No .nbh to patch.
Sebastian
c0rnholio said:
OK, got it working with AP Dual 3.0 by PK.
You have to do the following:
- Use a Hex-Editor and open the .nbh file from the update package
- Find the Text Unicode String: HTC-Athena and replace it with HTC-Hermes
- Find the follwing hex string:
1E3DA0E30D3083E3452FA0E30510A0E302 which means OS Version 5.2.1933
and replace it with the following hex-string:
4D3EA0E3063083E3452FA0E30510A0E302 which results in OS Version 5.2.1238
- Flash this to your Athena
- After boot use a registry editor and go to HKLM->System->Versions and change the vlue of Aku from .0.7.0 to .0.2.3
- Install Blackberry Connect Versionb 4.0.0.92 and go through the setup
- You're done, should work now
If some has webspace I can upload a fully modified version of the .nbh file.
Cheers
Click to expand...
Click to collapse
I've tried to do a ROM dump this weekend without much success. Can you back up a little bit for some one that isn't as technically savvy as yourself?
Do I need to flash to the AP dual 3.0 by PK first? Then modify the hex strings. I'm not sure how to do the hex strings. How much web space do you need for the files? I'm not certain of the exact order to do this.
Thanks,
Jacquie
jacquiegardner said:
I've tried to do a ROM dump this weekend without much success. Can you back up a little bit for some one that isn't as technically savvy as yourself?
Do I need to flash to the AP dual 3.0 by PK first? Then modify the hex strings. I'm not sure how to do the hex strings. How much web space do you need for the files? I'm not certain of the exact order to do this.
Thanks,
Jacquie
Click to expand...
Click to collapse
Here you go: http://rapidshare.com/files/84202603/AP_Dual_3.0_BB_Edition.rar.html
Enjoy
voegel said:
Is there a way to patch the official WM6 release from T-Mobile D? It comes as an exe File. No .nbh to patch.
Sebastian
Click to expand...
Click to collapse
You can use winRAR or winZIP to extract the exe and then you get the .nbh.
However, to shorten things up I did the job for you and uploaded the ROM to RS: http://rapidshare.com/files/8420583....35.111.3_1.50.00.00_Ship-BB-Edition.rar.html
It is not tested but should work without any problem. If not, you're on your own, it's your risk to flash it.
Cheers
c0rnholio said:
You can use winRAR or winZIP to extract the exe and then you get the .nbh.
However, to shorten things up I did the job for you and uploaded the ROM to RS: http://rapidshare.com/files/8420583....35.111.3_1.50.00.00_Ship-BB-Edition.rar.html
It is not tested but should work without any problem. If not, you're on your own, it's your risk to flash it.
Cheers
Click to expand...
Click to collapse
I understand complete and appreciate what you have done here. All this has changed so much since last I flashed ROMs (CE2003). Thanks.
jacquiegardner said:
I understand complete and appreciate what you have done here. All this has changed so much since last I flashed ROMs (CE2003). Thanks.
Click to expand...
Click to collapse
No problem mate, but the post you were quoting contains the link to the german rom. You have to use the other link I posted. Just wanted to make this clear to prevent you from accidently downloading and flashing the wrong file.
Cheers
c0rnholio said:
No problem mate, but the post you were quoting contains the link to the german rom. You have to use the other link I posted. Just wanted to make this clear to prevent you from accidently downloading and flashing the wrong file.
Cheers
Click to expand...
Click to collapse
Hi c0rnholio, nice job, as usual.
jacquiegardner said:
Is there a hack, or program mod to get BB on Athena with WM6? I've got a copy of the BB program. It tries to connect and something isn't allowing it.
Click to expand...
Click to collapse
...uh, what's BB? Big Brother?!?
c0rnholio said:
You can use winRAR or winZIP to extract the exe and then you get the .nbh.
However, to shorten things up I did the job for you and uploaded the ROM to RS: http://rapidshare.com/files/8420583....35.111.3_1.50.00.00_Ship-BB-Edition.rar.html
It is not tested but should work without any problem. If not, you're on your own, it's your risk to flash it.
Cheers
Click to expand...
Click to collapse
Thanks!! I will try.
voegel said:
Thanks!! I will try.
Click to expand...
Click to collapse
I tried twice, but I always get an error message regarding the image file. Flashing the original version works though.
Sebastian
voegel said:
I tried twice, but I always get an error message regarding the image file. Flashing the original version works though.
Sebastian
Click to expand...
Click to collapse
Is your Athena CID unlocked?
c0rnholio said:
Is your Athena CID unlocked?
Click to expand...
Click to collapse
No. Do I need to do that first? How do I do that?
please help!!!
Hello, I installed MICHYPRIMA ROM, and Blackberry connect version 4.0.0.106, Transport Version 4.0.0.102. I use BIS, and my terminal is CID unlocked. I tried to open the nbh file in order to modificate "the Text Unicode String: HTC-Athena and replace it with HTC-Hermes", and the hex-strings that you mencioned, but when I use any editor, it's impossible to find those strings. Is there a way you post detailed instructions and programs needed, to get bb connect working on my Athena? Thanks a lot
Related
Hi guys,
I've got an XDAII and I want to be able to see / edit the extended rom...
I've found the cab files I need (elsewhere in this forum) but I have no idea whatsoever how to use them?!?!
I can't run them, so there must be either an app I need or somewhere I need to put them, right?
Please help
Thx
Have you transfeered the cab file to your phone and executed from there?
It's a cab file. You put it on the XDA II in a folder of your choice, then run it, after reboot you will find a new icon in Programs. The rest is simple. :wink:
When I try to run it I get:
The is no application associated with "00unhide". Run the application first, then open this file from within the application.
Click to expand...
Click to collapse
Please post the link to the exact file so I can download and test it.
I just got it working...
After I downloaded the .cab, as I have WinRar I thought that it was something that needed extracting and it didn't!
http://forum.xda-developers.com/download.php?id=567
that's the link anyway, but it works perfectly!
Sorry for being such a idiot
No problem, hope its all sorted for you now.
I have uploaded the new O2 UK 1.72 ROM Upgrades for the XDA II. I have zipped the EXE files up so that more people are able to download them . The file comments are taken from the respective PDF files.
First back up your device, as the upgrade will erase all data from main memory.
To use, unzip to a folder on your PC, then either run the EXE or, if you have Country ID errors and/or wish to change operator or language IDs, extract the EXE to a folder and follow the steps in my post here.
The passwords to use are 0x20040304, 0x20040305 and 0x20040306 for the NK.nbf, ms_.nbf and Radio_.nbf files respectively.
Extracting the file from the zip I get only an executable file. How do I extract from this executable file the following:
HimaClearJumpCode.exe
HimaGetDeviceData.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
?
Thanks and regards
Use Winzip or Winrar to extract the files from the EXE.
and you can get the extended rom for blackberry here Xda_II_172181
along with the extra apps which include fax,zip and voice
http://forum.xda-developers.com/viewtopic.php?t=12526
O2 UK 1.72 XDA II ROM Upgrades
you're a star dcs.
Thank you
ian
Can't edit the extended rom using er2003edit
Can't edit the extended rom using er2003edit. I used the password from DCS's previous posts "0x20040305", but I got the error "Error accessing image files!". Any ideas, how to tackle this?
Re: Can't edit the extended rom using er2003edit
serkan said:
Can't edit the extended rom using er2003edit. I used the password from DCS's previous posts "0x20040305", but I got the error "Error accessing image files!". Any ideas, how to tackle this?
Click to expand...
Click to collapse
That is the correct password. Make sure you are not using the auto-detect option in the file open dialog. Select the file type explicitly.
Re: Can't edit the extended rom using er2003edit
dcs said:
serkan said:
Can't edit the extended rom using er2003edit. I used the password from DCS's previous posts "0x20040305", but I got the error "Error accessing image files!". Any ideas, how to tackle this?
Click to expand...
Click to collapse
That is the correct password. Make sure you are not using the auto-detect option in the file open dialog. Select the file type explicitly.
Click to expand...
Click to collapse
You are great, it works now, I'll test this on my i-mate..
thanks...
thank you
i extracted the extended rom with er2003edit. which cab file contains the blackberry software?
Possibly a silly question but... if i backup with sprite backup and then upgrade to the new ROM, can i still restore my backup without screwing anything up? Or do i need to reinstall all my software?
DCS: Thanks for making the download more convenient... You rock!!!
to be on the safe side i'd reinstall. i've just finally finished doing that, and have just created a sprite backup!
dangel said:
Possibly a silly question but... if i backup with sprite backup and then upgrade to the new ROM, can i still restore my backup without screwing anything up? Or do i need to reinstall all my software?
Click to expand...
Click to collapse
I don't know about Sprite, but I have restored a backup using Activesync onto an upgraded device without any problems.
ZeroXtreme said:
DCS: Thanks for making the download more convenient... You rock!!!
Click to expand...
Click to collapse
My pleasure
dcs said:
dangel said:
Possibly a silly question but... if i backup with sprite backup and then upgrade to the new ROM, can i still restore my backup without screwing anything up? Or do i need to reinstall all my software?
Click to expand...
Click to collapse
I don't know about Sprite, but I have restored a backup using Activesync onto an upgraded device without any problems.
Click to expand...
Click to collapse
Ok, cool but did you reinstall your apps or did they all just work as before? E.g. tomtom etc ? Just wondering, sorry for the hassle
updated http://wiki.xda-developers.com/wiki/Himalaya Rom 1.72 comparison
dangel said:
Ok, cool but did you reinstall your apps or did they all just work as before? E.g. tomtom etc ? Just wondering, sorry for the hassle
Click to expand...
Click to collapse
From what I can remember, everything worked OK. Just a few settings didn't restore, like button lock for instance.
M4io said:
updated http://wiki.xda-developers.com/wiki/Himalaya Rom 1.72 comparison
Click to expand...
Click to collapse
Nice Quick work M4io
dcs said:
I have uploaded the new O2 UK 1.72 ROM Upgrades for the XDA II.
Click to expand...
Click to collapse
Is this an official ROM? The O2 Website is still posting the v1.60.50 ROM as the latest official ROM. Where did u get this one from?
Smiley
hi
before installing Tom rom I have decided to dump my original rom in case I needed to put it back.
anyway I have been able to dump the 4 Raw files. now I see that in the Kaiser section there is a guide on how to reconstruct a rom to make it flashable and I wonder if I can do the same with my Niki.
any expert could pls confirm this?
thanks in advance for your help.
cheers
edit: I ve just noticed that there are some other threads about this subject...anyway if someone can confirm the right procedure would be great. thanks
Yeah, also wondered about that Kaiser rebuilding tutorial.
Talked to a few people over PM who have the same problem.
But even in the Threads nobody who knows more about flashing/ROMs seem to be willed to help out with a fre informations. :-/
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Thyraz said:
Yeah, also wondered about that Kaiser rebuilding tutorial.
Talked to a few people over PM who have the same problem.
But even in the Threads nobody who knows more about flashing/ROMs seem to be willed to help out with a fre informations. :-/
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Click to expand...
Click to collapse
well..nice qustions..to which obviously I cant reply..hope someone will be so kind to help us out.
Thyraz said:
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Click to expand...
Click to collapse
a baserom is nothing more then a normal rom, just put a rom you like, together with the dumped filen in the kitchen folder. maybe ruu needs some information from the rom file itself, which are not present on the device.
what you find on your device is just that what you dumped. (but after hardreset)
.. i know that this not matters for you anymore. but eroG needs to know.
therealholg said:
a baserom is nothing more then a normal rom, just put a rom you like, together with the dumped filen in the kitchen folder. maybe ruu needs some information from the rom file itself, which are not present on the device.
what you find on your device is just that what you dumped. (but after hardreset)
.. i know that this not matters for you anymore. but eroG needs to know.
Click to expand...
Click to collapse
well yes I defenitely needed to know these things...
now, if it is not of too much trouble for you, where do I find a baserom and is there a guide on how to do it...just to avoid stupid mistakes while doing it?
thanks a lot
So, from baserom there are not much information used. (Perhaps Header information for Rom file, or something like that)
My new ROM is (more or less) the same result as on my device?
And Baserom isn't a own file format, i can use the wwe-rom postet here in the forum?
thx for help
Thyraz said:
And Baserom isn't a own file format, i can use the wwe-rom postet here in the forum?
Click to expand...
Click to collapse
Yes that should work fine.
request guide on how to get dumped rom back to device
i've read alot about how to dump rom from device and how to get dumped rom back to device.
the more i read i got confident how to dump rom .... did it .. and now have my 4 raw files.
on the other hand the more i read about how to get dumped rom back to device ... more and more i got unsure how to do it.
so please all senior posters and specialists - can you please post a cookbook on how to get it back to the device ?
thanks ! alot and keep up the good work here !
Sackbauer, I totally agree with him.
I have 4 Raw files for a Norwegian ROM, but how do can i "transform" them into a acctually "flash" file?
Please someone with the knowledge, write a "easy to understand/ step by step" guide to the ones that don't have a clue about this..
Ole
im getting kinda confused with this also, dumping the rom is no big deal, but putting it back together and flasing my phone with it, thats the big how to...
I has contact with Tom.
And he busy with vietnamese new year now.
He said will back after 1,2 day and answer all questions..
Don't worry
... good to hear that tom will take care after his new year ;-)
also keep my fingers crossed that someone is able to check radio rom and possibly enable gps and wifi ...
let me try first:
- download this kitchen
- Copy your part01.raw and part02.raw into the BaseRom Folder of this kitchen
- Copy a Nike RUU_signed.nbh into the BaseRom Folder (e.g. tom_codons rom just open the. exe with winrar and extract the file)
- Open !Begin.cmd, press 2 and do everything, what is prompted
- Open !Cook.cmd and do what is prompted
- when HTC Rom Tool is opened press Rom_Builder and ... right from System. Then Choose os_new.nb and press built
i wrote this without testing again. so if i missed something tell me, please and i'll try to help.
sounds good !
will try it later this evening and will let you know ...
thanks so far
omg .... it appears that i just "cooked" my first rom out of my dumped files from my niki .
thanks therealholg for your guide !! thats what i was looking for.
the only thing which makes me a bit nervous about reflashing my just cooked rom onto my device is that during cooking it sometimes says "file not found".
but after ignoring these messages i have a nbh file which obvioulsy was not in the folder before !!! ;-) yeah
so, now i know how to revert the process but i am to anxious to try it as this is my only niki.
lets see and wait what others say about the step by step guide of therealholg ...
in anyway - you made my day therealholg
cheers
wow... thanks for this...
tryed it out and works...
the only thing is that it still says Niki Project on the boot screen...
everything else works just fine
marazi said:
wow... thanks for this...
tryed it out and works...
the only thing is that it still says Niki Project on the boot screen...
everything else works just fine
Click to expand...
Click to collapse
You can add the splash screen in HTC Rom Tool.
therealholg said:
let me try first:
- download this kitchen
- Copy your part01.raw and part02.raw into the BaseRom Folder of this kitchen
- Copy a Nike RUU_signed.nbh into the BaseRom Folder (e.g. tom_codons rom just open the. exe with winrar and extract the file)
- Open !Begin.cmd, press 2 and do everything, what is prompted
- Open !Cook.cmd and do what is prompted
- when HTC Rom Tool is opened press Rom_Builder and ... right from System. Then Choose os_new.nb and press built
i wrote this without testing again. so if i missed something tell me, please and i'll try to help.
Click to expand...
Click to collapse
What to do with part00.raw and part03.raw?
Part00.raw is the are with IPL, SPL and Splashscreen. We don't want to override our new SuperCID Bootloaders
Part03.raw is content of your local storage ... i think you can't flash this area with ruu.
hi all friends...!
I'm just back from some days busy with vietnamese new year.
And have made code kitchen for reconstruct a dumped rom niki device.
What we need to do now ?
1. Copy part02.raw u dumped from original rom to Tools folder and run step1.bat
2. Extract RUU_signed.nbh from Ship rom and put in ShipRom folder.
Link download :
http://www.asia.htc.com/download/RU....707.09_Radio_Nike_1.58.16.27_signed_Ship.zip
Or here :
http://www.asia.htc.com/download/RU....871.14_Radio_Nike_1.58.16.27_signed_Ship.zip
3. Run Reconstruct a dumped rom.cmd in my Tools and wait some times.When page DOS done it will exit .U go to Update_Rom folder already have new RUU_signed.nbh.This files reconstructed your original Rom with your languages.
Have funs..!
Does anyone have just the OS ROM portion of the new VZW MR1 update? If so could you link it or explain how you disassemble the NBH file? What tools did you use and do you know of a good thread to learn to make your own kitchen?
Yes, I have searched for these. Kitchen one just returns too many results. The Stock OS querry returns too many unrelated posts. I have seen it floating around before.
Any help is appreciated with any portion of this post.
Thanks!
scrosler said:
Does anyone have just the OS ROM portion of the new VZW MR1 update? If so could you link it or explain how you disassemble the NBH file? What tools did you use and do you know of a good thread to learn to make your own kitchen?
Yes, I have searched for these. Kitchen one just returns too many results. The Stock OS querry returns too many unrelated posts. I have seen it floating around before.
Any help is appreciated with any portion of this post.
Thanks!
Click to expand...
Click to collapse
First, you need to extract the self-extracting EXE that Verizon/HTC made.
Download the utility called NBHUtil. This will extract the NBH file and create NB files. In order to compile the individual files into an NBH again, use NBHGen, found in the kitchen under tools, with the following schema...
***Sample
TITA1000
00000000
VZW2.09
USA
200,0_SPL.nb
600,1_Splash.nb
601,2_SubSplash.nb
900,New_ExtROM.nb
300,3_Radio.nb
400,4_os-new.nb
*** End Sample
1 - is the phone model. Must be written as TITA1000
2 - CID
3 - Version
4 - Region Code
5 - 10 - these are the individual files.
first 3 digits is the area of memory to write the file. These MUST be as the sample. Then a comma and the "File Name". In order to create an NBH file that only has one, just delete the other lines. For OS only make it like this...
** OS Only
TITA1000
00000000
DCD_3.2.6
USA
400,4_os-new.nb
*** End OS Only
Edit: Forgot to explain NBHGen. It is a command line utility. Create the "Sample" text above and name it ****.txt (whatever you want to call it). Then run in CMD prompt..... nbhgen ****.txt. All the files must be in the same directory. If it finds the txt file, and the nb files, it will successfully create the NBH file as Ruu_signed.nbh
** OS Only
TITA1000
00000000
DCD_3.2.6
USA
400,4_os-new.nb
*** End OS Only
Click to expand...
Click to collapse
This isn't a dcd rom so why would you call it DCD_3.2.6? Should be whatever the output from nbhextract gives.
gc14 said:
This isn't a dcd rom so why would you call it DCD_3.2.6? Should be whatever the output from nbhextract gives.
Click to expand...
Click to collapse
Yes. I am aware... it's just a sample. You can call it whatever you want. Obviously don't use somebody's "Copyrighted" name. LOL.
gc14 said:
This isn't a dcd rom so why would you call it DCD_3.2.6? Should be whatever the output from nbhextract gives.
Click to expand...
Click to collapse
Thank you both very much. This is the info I needed. I want to delve into making my own kitchens. This is what I needed.
Thank you both!
nitro66215 said:
First, you need to extract the self-extracting EXE that Verizon/HTC made.
Download the utility called NBHUtil. This will extract the NBH file and create NB files. In order to compile the individual files into an NBH again, use NBHGen, found in the kitchen under tools, with the following schema...
Edit: Forgot to explain NBHGen. It is a command line utility. Create the "Sample" text above and name it ****.txt (whatever you want to call it). Then run in CMD prompt..... nbhgen ****.txt. All the files must be in the same directory. If it finds the txt file, and the nb files, it will successfully create the NBH file as Ruu_signed.nbh
Click to expand...
Click to collapse
Quick Question. I noticed the NBH tool you posted as the ability to make and NBH files as well as tear them down. Would you use the NBH Gen program to generate NBH files over this NBHUtil that you posted?
EDIT: Nevermind! I built my first OS only ROM from these two tools. My next question is how do I break the OS.NBH or NB down into the actual kitchen files. I would assume that is the next step to creating your own kitchen, correct? Long ago on my Apache I used the DogGuy Kitchen maker with success. I tried that the other day and it made a mess of my Titan, hehe. Any suggestions? Alos, I would prefer to learn command line if at all possible. I hate GUI's. Yes I really did say that. I hate GUI's.
These tools are in the kitchen as well. There is a readme attached.
scrosler said:
Quick Question. I noticed the NBH tool you posted as the ability to make and NBH files as well as tear them down. Would you use the NBH Gen program to generate NBH files over this NBHUtil that you posted?
EDIT: Nevermind! I built my first OS only ROM from these two tools. My next question is how do I break the OS.NBH or NB down into the actual kitchen files. I would assume that is the next step to creating your own kitchen, correct? Long ago on my Apache I used the DogGuy Kitchen maker with success. I tried that the other day and it made a mess of my Titan, hehe. Any suggestions? Alos, I would prefer to learn command line if at all possible. I hate GUI's. Yes I really did say that. I hate GUI's.
Click to expand...
Click to collapse
I've used the NBH tool to build it... but it came out funky. So I just use the NBHGen utility
nitro66215 said:
I've used the NBH tool to build it... but it came out funky. So I just use the NBHGen utility
Click to expand...
Click to collapse
Ok, same thing here. Otherwise everything is working exactly as you described. Thanks.
Will try the the IMAGEFS tool now.
This is too easy... So far...
Another question but sort of off topic. Is there a way to grab a ROM NB or NBH file from my phone? If so would it bring back all the custom apps and settings?
Hi all, I'm trying to make Fido Call Display to work on my Device, and I found the solution here. However the solution requires me to cook the rilphone.dll file into the ROM that I'm using (NAFT's v2.3). I've never cooked a ROM before and I'm far from understanding the procedure, but I don't think it's that hard to add a file in a cooked ROM. Can you guys help me out with this?
Please show me how to add/replace rilphone.dll in NAFT's v2.3 ROM. Thank you.
Replied on other thread
Da_G said:
Replied on other thread
Click to expand...
Click to collapse
Da_G said:
Yes, the reason my method does not work is because the rilphone.dll is not signed with a trusted certificate as I stated..
Pretty much leaves the only option as cooking it in, unless you are already using a ROM with a modified nk.exe in XIP to disable certificate checking.. then you can just drag and drop rilphone.dll and reboot.. but since stock ROMs are not modified in such a way, you cook it in, as all files cooked into ROM are trusted..
Unfortunatly there is no way to modify XIP without cooking either.
If a ROM is unprotected (still has it's rgu's) - download a ROM kitchen for your device.. extract the rom of your choice.. replace rilphone.dll in \OEM\OEMDrivers.. then re-assemble the ROM.. no registry manipulation needed.
For the raphael ROM kitchen, name your ROM "RUU_Signed.nbh", put it in \BaseROM
Run RaphaelKitchen.bat
select "e" for extract, then "a" for "From RUU_Signed.nbh"
let it go through its motions, when it's done replace rilphone.dll in \OEM\OEMDrivers
again in RaphaelKitchen.bat select "cf" then "b"
click "BuildOS" tab
click "Load ROM" button
navigate to RaphaelKitcken folder (has subfolders OEM, ROM, SYS, etc), press ok
click green "Go" button
when done, close the window
again the kitchen will go through some motions, when it pops up XVI32 and says "Page Pool Changer" in the command prompt window simply close xvi32
now it should prompt to flash to your device.. and you're done
Click to expand...
Click to collapse
Ya, I tried it with NAFT's v2.3, but it seems that the file is protected... the file can't be read.
I'm not sure I understand, you tried to cook the file into ROM and it gave you an error about it being protected? Or do you mean you tried to copy the file to the device, and it wouldn't let you overwrite? If that's the case that's why I suggest renaming rilphone.dll to rilphone2.dll before you copy to device, and then change the registry to point to that.. that way you don't have to overwrite the file that's already on the device.
Da_G said:
I'm not sure I understand, you tried to cook the file into ROM and it gave you an error about it being protected? Or do you mean you tried to copy the file to the device, and it wouldn't let you overwrite? If that's the case that's why I suggest renaming rilphone.dll to rilphone2.dll before you copy to device, and then change the registry to point to that.. that way you don't have to overwrite the file that's already on the device.
Click to expand...
Click to collapse
i tried what you told me to do on the other post; Rename the file, and extract it... I have no problem renaming the file, but when I tried to extract it with Raphael Kitchen, I got error like "Cannot read the file" or something like that... here is the dump log
ImgfsToDump 2.1rc2
Cannot map file imgfs.bin
Click to expand...
Click to collapse
Nothing was extract.
hmm, sounds like the ROM kitchen is having a problem handing the .nbh you fed it, try it with a stock nbh and see if it works..
the rom you are trying to extract may be protected from extraction.
Just to make sure, you are trying to extract the ruu_shipped.nbh in \baserom.. which is the ROM image, somewhere in the range of 50 to 200mb large..
Da_G said:
hmm, sounds like the ROM kitchen is having a problem handing the .nbh you fed it, try it with a stock nbh and see if it works..
the rom you are trying to extract may be protected from extraction.
Just to make sure, you are trying to extract the ruu_shipped.nbh in \baserom.. which is the ROM image, somewhere in the range of 50 to 200mb large..
Click to expand...
Click to collapse
I redownload the Rom and it seems to work now. I can finally extract it.
As for the rilphone.dll... do you have the right one for Rogers Display? and the one that will work for Fido as well?
edit: I successfully reflashed my ROM, but the display thing doesn't work. Beside replacing rilphone.dll is there any reg I need to change? (can you give me the right rilphone.dll file?
I got the rilphone.dll file here
Sucessfully cooked in NaFT's v3.1, however it still doesn't work. It always show unknown Caller.
any help here would be much appreciated