This is one handy tool, it's a simply program that let you change ALL the operator names inside your phone to whatever you whant. Because it also fix some problems with phones that show the 5 digit ID i tought i share with you all. Works almost on any device ! Cheers
Install to Main Memory and NOT to memorycard !
Developer: codyppc
very nice app
works fine
thanks
very awesome cab it is useless but fun thing to do, now i have "pimp mobile"
joe
works on my phone until i make or receive a phone call
Very good Thanks
1loudsvt said:
works on my phone until i make or receive a phone call
Click to expand...
Click to collapse
ok? and what phone, radio, rom, carrier, etc are using....
illcaptive said:
very awesome cab it is useless but fun thing to do, now i have "pimp mobile"
joe
Click to expand...
Click to collapse
i don't think it's useless, i used it to put my name on the today screen without the rest of the owner information, i think it's GREAT. i used to try and do it manually through the reg, but it defaulted every soft reset, so this thing is titts for me.
Yeah it's great little tool. I used it because my operator showed the name from the paycards (Pay&Go) and i have a abo, so changed the name to the operator name.
Great little program
Works a treat on my wizard.
Many thanks
galaxys said:
ok? and what phone, radio, rom, carrier, etc are using....
Click to expand...
Click to collapse
htc apache, helmi wm6 rom, verizon, any time i do something it reverts back :-(
When I uninstall this, my phone gets an error about not being able to run the mortscript. Is the uninstall supposed to delete every instance of the program?
1loudsvt said:
htc apache, helmi wm6 rom, verizon, any time i do something it reverts back :-(
Click to expand...
Click to collapse
you can easily do it in regedit
HKLM\system\state\phone\current operator name
doing that it reverts back as well
I use a dual number sim (VODAFONE Romania) and it's not working for me.
Don't work for me....
After some second the operator name comes back....
I have tried also with the register editor.....
Anyone has a solution?
Yeah same here i did it in regedit and after a few seconds it came back... except in "HTC Home" it has stayed which is where i see it most so kind of ok.
Even S2U2 it cam back after a few seconds!
MM
MaxMotus said:
Yeah same here i did it in regedit and after a few seconds it came back... except in "HTC Home" it has stayed which is where i see it most so kind of ok.
Even S2U2 it cam back after a few seconds!
MM
Click to expand...
Click to collapse
Same thing......
Gr8 work thanxs bro
Great work
It works perfectly fine on my Universal WM5, operator name doesn't change even after soft-reset or while makin' or receivin' calls.
Great work, sport.
Cheers..
works perfectly, thanks =) it only changes to our original operator name when the signal changes..after the signal is stabilize, it will be turn back to our name
Related
Hi,
I have switched aa sim in my XDA, worked with it for a day and then hardreseted the device. Since then, the phone doesn't work! It seems there is no reception (an exclemation mark near the antana icon) and the SIM manager does not load as well.
I'm with WM2003 4.00.01, Radio 4.21.00.
Did anyone ever experianced something like that?
michar said:
Hi,
I have switched aa sim in my XDA, worked with it for a day and then hardreseted the device. Since then, the phone doesn't work! It seems there is no reception (an exclemation mark near the antana icon) and the SIM manager does not load as well.
I'm with WM2003 4.00.01, Radio 4.21.00.
Did anyone ever experianced something like that?
Click to expand...
Click to collapse
Silly question, but have you tried to turn on the phone, btw. input your PIN?
Stefan
What do you mean?
Input my PIN? What does that mean?
I have hard reseted my device several times, and had to do nothing, what is this PIN number you mentioned?[/quote]
Isn't you SIM-card sved with a PIN-Code????
What happend when you press the "green" button on your device?
What's in the Display of the Telephone Application?
Stefan
My SIM card have no PIN number, and in any way where can I inout it?
The phone app just pops up empty, buty I can't make any calls - it seems it's only trying to dial (cought up in "Dailing...").
It's really kind of starnge - as if it does not recognize my SIM.
michar said:
My SIM card have no PIN number, and in any way where can I inout it?
The phone app just pops up empty, buty I can't make any calls - it seems it's only trying to dial (cought up in "Dailing...").
It's really kind of starnge - as if it does not recognize my SIM.
Click to expand...
Click to collapse
Why not send to repair!
Can you repair this?
Is this a known problem? Can you tell me how much it costs?
Please guys - i have the same problem,
Dont know what to do next...im completely cluless.
Thank for the help in advance.
this is unique, never heard of it but if worse case worse try changing ur RSU version to another one, MAKE SURE YOU KNOW WHAT AM TALKING ABOUT other wise search in the forum for 1% problem & you'll see what i mean :?
hi,
well if RSU (RADIO STACK UNIT) is changing the rom and the radio of the device - then i did it.
the roms that i`ve tried: 4.00.01 (2003), the special edition rom from here.
also i tried the official radio from O2 site.
dont know what else to do.
it is dtrange that several poeple has the same problem, makes you wonder that the fault is not in the hardware.
PLEASE HELP - anyone.
PLEASE....?
I believe most people face this problem. I hv no solution to it, but I personally believe this is not a hardware prob and it can be solved. Hope to start this thread so everyone can discuss this together and come up with something.
got this from other thread...
bull_do3er said:
put registry editor shortcut in \windows\startup
put wififix.reg in \Program Files
all this does is set the HTCPreloadwifi=1 everytime i need to reset my device. i think the problem is the value was resetted to 0 everytime you reset your device. That's why the wifi doesnt work. not sure if this works for everyone. but for me its working nearly everytime.
Click to expand...
Click to collapse
is this a good idea?
Pehaps it is useful to give some more specific details. Indeed there are several users that run in to these problems, but many more (including myself) never experienced any misbehaviour whatsoever. There must be a difference somewhere.....
i faced the prob which when u set the HTCPreloadwifi to 1, it revert back to 0 after soft reset. then i found that this is actually bcoz of the file "WiFiInit", which is in the startup. so i removed it from the startup, set the HTCPreloadwifi to 1, then power off and on it instead of soft reset (soft reset might work, just play safe.)
rondol1 said:
Pehaps it is useful to give some more specific details. Indeed there are several users that run in to these problems, but many more (including myself) never experienced any misbehaviour whatsoever. There must be a difference somewhere.....
Click to expand...
Click to collapse
rondol1, will you stay here in this thread. who knows, we might spot the difference between your "working" device and our "half-working" device. appreciate that.
The point is, I never changed anything after flashing the ROM and WIFI works right away. I have noticed that with WEP encryption enabled things don't go that smooth. Without security OR with WPA enabled, I don't experience any problems with WIFI. About Bluetooth, I really don't use it, only to connect my TomTom GPS receiver and that give no problem whatsoever. But that comparison isn't fair, cos the TomTom app takes care of it by itself, without the general WM6 settings.
Perhaps it's good to mention that I use the latest WM6 builds, I red your post in some threads from older ROM's too. Could be that those earlier release had more bugs on this point.
i'm using Fantastic Mobiz v2.0b4....actually wanna to load up other new wm6, but instead of avoiding, i think we shd try to solve the problem..
anyway, i am thinking about whether there is anything wrong with the registry that caused the prob, or any 3rd party software that is interrupting the bluetooth's functioning. is there any way to "compare" the registries?
I don't know, but I hardly use any 3d-party software. And about solving the probs on early WM6 builds: isn't that a Microsoft job? If there is a problem in the OS, we don't gonna solve it by changing some regs!
rondol1 said:
I don't know, but I hardly use any 3d-party software. And about solving the probs on early WM6 builds: isn't that a Microsoft job? If there is a problem in the OS, we don't gonna solve it by changing some regs!
Click to expand...
Click to collapse
haha...ya...but i meant a cooked version of wm6. the developer might hv added something which works on his but not on others. any assumption hv to take into consideration. i guess that is how most probs are solved.
seems like no one patronize this thread...ahah , anyway i will still try to update what i've discovered until the next version of rom is up. who knows, people might be desperate and found this thread. i just hope someone will join in the discussion or i will look like a bloody fool who participates in my own thread.
right now, i insert btdwake and btlauncher to my startup folder. it works most of the time (not sure it works bcoz of the files that i put in the startup folder).
i still think that it might be a registry problem. will compare the registry with a working set's one of these days.
I've got also a problem when trying to enble Wifi, what you've done exactly? Does it works?
Gaexu said:
I've got also a problem when trying to enble Wifi, what you've done exactly? Does it works?
Click to expand...
Click to collapse
hi Gaexu. well...it is easy to make things work, but problem lies on the steps that make them work. enabling my wifi is fine, but not perfect.
I suppose your prob is when u go to comm manager, click on the "Wlan", then u see the radar (loading), after that, nothing happened, the icon still show the grey icon with the cross.
steps:
1.)first you gotta remove a file called "WiFiInit" from \windows\startup\ folder.
2.)next, go to the registry using PHM Registry Editor. go to HKLM\Comm\TNETWLN1\Parms, there are 2 reg dwords - "HTCPreloadStatus" and 'HTCPreloadWifi". change their value to "1".
3.)power off the device and on it back.
the reason to remove "WiFiInit" from startup is bcoz it seems to cause "HTCPreloadStatus" value to revert back to "0" after a soft reset. actually i've remove a few more things from startup, but i dun think there is any "linkage".
sorry about this, but don't expect the wifi to be enabled as easy before upgrading (at least not for me). to enable the wifi for the first time (after you soft reset everytime), go to comm manager, click on WLAN. then the radar thingy comes out, rotate a few round and disappear. while it is rotating, observe the "G" on top, it changes to the wifi icon and revert back to the "G". that means wifi is detected. click on WLAN again, and same thing will happen. now, push the on/off button to black out the screen(standby mode) and turn on again. wifi comes alive.
i am too long winded. this is my first time in my life typing more than 6 lines in a forum. do let me know if it doesn't work. good luck.
Thanks for your help
The Wifi works, but just for about 30seconds or 1minute... then it turns off
does anyone know this problem?
I will try it again and again,
thanks
Gaexu said:
Thanks for your help
The Wifi works, but just for about 30seconds or 1minute... then it turns off
does anyone know this problem?
I will try it again and again,
thanks
Click to expand...
Click to collapse
hv u change the value in the registry?
Yes, "HTCPreloadStatus" and 'HTCPreloadWifi" have the decimal value 1.
HTCResumeWifi = 0
I will retry it with another network (not the one from my University) maybe it works...
Gaexu, so how's your bluetooth? working perfectly?
i looked through the registry and found that many of the bluetooth keys are incomplete after comparing with other devices...but i need to extract more info from a workin prophet...
Hi scarymoviesg
Now my Wifi works perfekt (not with the one from the University but with all the others)
Thanks a lot!!!!!
Gaexu said:
Hi scarymoviesg
Now my Wifi works perfekt (not with the one from the University but with all the others)
Thanks a lot!!!!!
Click to expand...
Click to collapse
glad that it works... anyway...how's ur bluetooth?is it work?
All credits goes to myn. Here is the original thread [ROM] Myn’s Warm Eclair - [RLS1 - 06/17/2010] - An Accelerated Experience
Confirm working good on my NIKE100 on ext2 SD, so withour flashing, i can use Winmo n Android on the same device.
How to:
1. Download from the original thread, i'm using NoMORootFS for SD with 240x320 version
2. Backup! than, clear whatever "android" stuff you have from sdcard (I dont want it to get caught up in the install) especially your andboot folder
3. Extract contents of downloaded zip to temporary directory
4. Copy extracted /andboot folder to the ROOT of your SDCard
5. copy zimage to /andboot folder with this version (credit to mblaster) get in from http://84.23.71.227/kerneloftheday (i'm using zimage with vibration on my nike100 with zimageNike name)
6. overwrite default.txt with attached default.txt
7. Run HaRET, than hit “run” to launch android
8. Press and hold center of dpad after hitting "run" and follow the directions in the NoMoRootFs menu system
9. Install android system
10. Quit installer
11. Booting into Android
12. After you can see android logo wait about 15 minute
13. then shutdown and open up your phone again (should boot into winmo)
14. start haret and boot again to android
15. your android is ready to use
Working: Call, sms, ring, data (although there seems to be a little problem)
Not Working: Bluetooth, camera
Great job and a good tutorial buddy, I defenitly gonna give it a try.
ok, try it and share here, maybe it can make us nike user more familiar with android
Nice... But!
Nice one there. There is seems problem with the hardware keypad. The hardawre keypad works though keypad #1 when pressed twice sleeps nike. Maybe the said button is mapped for that function. Better if we can bring it back to the original function. Thanks again.
uhm...
Hey,
I copied everything onto my SDcard, into the /andboot directory
Haret.exe starts, holding the D-pad...Linux starts etc, but...then it hangs with an error "sh: 2 unkown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD card"
And from there on every button I press gives my weird syntax...
anybody knows what I'm doing wrong..?
Installed on ext2 partitions, now take some tests on my nike 100.
Problems I found:
- On boot I have Voice Search not responding.
- If I try to set mms settings the apn disappear (i use Wind in Italy), setting only apn and name work (i'm syncronizing with gmail)
Thanks a lot for this tutorial!
Many thanks for this post.
Three questions:
You are using kernel with vibration for niki200/300 on your nike100 and your screen dont freeze?
What's the problem with data connections?
It's android 1.6?
Regards!
ebautista said:
Nice one there. There is seems problem with the hardware keypad. The hardawre keypad works though keypad #1 when pressed twice sleeps nike. Maybe the said button is mapped for that function. Better if we can bring it back to the original function. Thanks again.
Click to expand...
Click to collapse
what do you mean by keypad #1? hardware numeric and alphabetically works on me.
and the android device keypad is different with winmo, in android there are back, menu, end key (CMIIW). so we need to map our device keypad to android one
hansie_k said:
Hey,
I copied everything onto my SDcard, into the /andboot directory
Haret.exe starts, holding the D-pad...Linux starts etc, but...then it hangs with an error "sh: 2 unkown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD card"
And from there on every button I press gives my weird syntax...
anybody knows what I'm doing wrong..?
Click to expand...
Click to collapse
when it tolds to hold d-pad, try to hold it or press it twice,it will come to installer screen, then install it first, after that you can boot android
vocione said:
Installed on ext2 partitions, now take some tests on my nike 100.
Problems I found:
- On boot I have Voice Search not responding.
- If I try to set mms settings the apn disappear (i use Wind in Italy), setting only apn and name work (i'm syncronizing with gmail)
Thanks a lot for this tutorial!
Click to expand...
Click to collapse
voice search: i don't use that, maybe that is the build error
never set mms, but if we set apn other MNC and MCC then it will disappear on apn list but it do work, myn is trying to fix this problem
Maxxd01 said:
Many thanks for this post.
Three questions:
You are using kernel with vibration for niki200/300 on your nike100 and your screen dont freeze?
What's the problem with data connections?
It's android 1.6?
Regards!
Click to expand...
Click to collapse
yes, my screen is not freeze
data connection?my apn setting no showing on apn list but it do connect, but sometimes i find it is more difficult to make connection, don't know if it is eclair probelm or network problem
no, it is eclair, android 2.1
waiting for froyo to come here
youngsien said:
voice search: i don't use that, maybe that is the build error
never set mms, but if we set apn other MNC and MCC then it will disappear on apn list but it do work, myn is trying to fix this problem
Click to expand...
Click to collapse
youngsien said:
yes, my screen is not freeze
data connection?my apn setting no showing on apn list but it do connect, but sometimes i find it is more difficult to make connection, don't know if it is eclair probelm or network problem
no, it is eclair, android 2.1
waiting for froyo to come here
Click to expand...
Click to collapse
The APN editing issue is caused from the paid market enabler script that is running as a service. It is trumping changes made to the APN list.
I am going to talk to dzo about making the same changes he made in the Donut ril for me. This should hopefully eliminate this issue.
The Voice Search Wait/Force close on start is a known issue and unfortunately in this build is more of an annoyance. For now just click the "Wait" button.
Okay, tested it today almost the whole day, started with full battery at 08.00, very surprised about the graphics and the response of my Niki, lot's of stuff are working, internet connection worked, hardware keypad was working normally, Gmail working, incoming and outgoing call's working, sms working.
Only tested those things because it's a phone and those things are the most important for a phone (my opinion).
Try to acces my sim-card to add contacts but wasn't able to do that.
Okay at 19.45 my battery is empty, be aware my battery is 3 years old.
Conclusion, for me it is a perfect working phone, sometimes you need a little bit patience to let the phone do his job.
Thanks youngsien
Any chance of getting CDMA functionality for this?
youngsien said:
when it tolds to hold d-pad, try to hold it or press it twice,it will come to installer screen, then install it first, after that you can boot android
Click to expand...
Click to collapse
I've tried after I read this reply , ( try to hold d-pad or oress it twice)...
It's still not work.
maybe we need the file = "system.img") that not provided on sdcard.
myn said:
The APN editing issue is caused from the paid market enabler script that is running as a service. It is trumping changes made to the APN list.
I am going to talk to dzo about making the same changes he made in the Donut ril for me. This should hopefully eliminate this issue.
The Voice Search Wait/Force close on start is a known issue and unfortunately in this build is more of an annoyance. For now just click the "Wait" button.
Click to expand...
Click to collapse
hey, the creator Myn is here, is it ok if i post your build in here? i hope nike user can has some fun to get android run on their device.
Can you please talk to dzo to make bluetooth enable for nike too? i think this is the minus one for nike user, kaiser and polaris even can use wifi and bluetooth but for us nike user, we don't have wifi but we can't use bluetooth also
will wait for your next release. thanks.
Rataplan said:
Okay, tested it today almost the whole day, started with full battery at 08.00, very surprised about the graphics and the response of my Niki, lot's of stuff are working, internet connection worked, hardware keypad was working normally, Gmail working, incoming and outgoing call's working, sms working.
Only tested those things because it's a phone and those things are the most important for a phone (my opinion).
Try to acces my sim-card to add contacts but wasn't able to do that.
Okay at 19.45 my battery is empty, be aware my battery is 3 years old.
Conclusion, for me it is a perfect working phone, sometimes you need a little bit patience to let the phone do his job.
Thanks youngsien
Click to expand...
Click to collapse
yup, seems like battery problem still there,can't compare to winmo. Lose in battery, bluetooth, and camera. hey you can manage it for a long time, do you have data always on?how was you using it?
88fingerslukee said:
Any chance of getting CDMA functionality for this?
Click to expand...
Click to collapse
don't know about that. soryy....
Dricos said:
I've tried after I read this reply , ( try to hold d-pad or oress it twice)...
It's still not work.
maybe we need the file = "system.img") that not provided on sdcard.
Click to expand...
Click to collapse
no, system.img is created in /andboot when installing, no need to copy file "system.img". here is the step i usually use. when starting haret and hit run, lot of text (linux boot style) come out. ok from now press and hold center d-pad, after some page it will halt with the message "press center d-pad to....." then release your 1st d-pad hold then press and hold once again. you should see some weird code on your screen but that's ok. after that you will come to installer screen to make system.img and data.img on your sd.
hope you understand, sorry for my english
thanks
youngsien said:
don't know about that. soryy....
Click to expand...
Click to collapse
Darn.
I think it actually already has CDMA functionality since this came from the Vogue thread, but I'm not unsure as to how to get the default.txt file right so that it will boot. Does anybody know of a guide to the the android linux boot commands? It's possible that the devices differ enough to require some different commands.
88fingerslukee said:
Darn.
I think it actually already has CDMA functionality since this came from the Vogue thread, but I'm not unsure as to how to get the default.txt file right so that it will boot. Does anybody know of a guide to the the android linux boot commands? It's possible that the devices differ enough to require some different commands.
Click to expand...
Click to collapse
theoritically is right, but i don't know about that, do you ever asked mblaster on his nike myn donut thread?he is more master in this, because he can compile zimage kernel for nike. maybe he know the answer.
Hi all, I've tested yesterday and this morning...
I found it unstable, after I have set the apn I tried to sync with gmail accont, but never work (always "problem with the sync" reported).
Sending and receiving sms work, make calls work difficult, sometimes i heard but on the other side doesn't hear me.
I try to reinstall and don't set the APN, but anything solved.
Last, after reinstall, when I call it goes to sleep mode but no more wake up (using camera button twice, or other buttons).
I'll do more test, hope this can help.
Bye
p.s. sorry, I speak english only a little bit
Hi all,
Nice build...
Anyway, although it's very hard to resist, imho it's a good idea to wait a few more days until Myn releases the next Versions. If you follow the original Thread in the Vogue forum, you'll see that there are still a lot of problems even for the Vogue Users. For that reason it's probably a good idea to wait until the big one's have been fixed...
i just notticed today that wheni call my voicemail none of the phone onscreen buttons work
keypad,end call, speaker etc are all non functional. i have to press the hardware key to end call.
im using CHT EDITOR with stock TMO rom
could be 2 things related to MinimumTapTime for screen sensitivity:
1. Do you have BSBtweak installed? DO NOT change the MinTapTime setting. Revert it.
2. Did you do tweak#44 MinTapTime from SBOY2000's HD2 tweaks thread? change that value back to what it was.
didnt tweak anything ust used bsb tweaks and changed it back to normal
still same.
at the moment i cant even get to the phone screen
the phone is completely fn cracked out.
im seriously on losing my patience with this sht, 3 phones cant be all having same issues thats just impossible unless the OS is ****.
yesterday i installed the WCX ILLUMINATI SERIES HD2 EURO/TMOUS 21911 2017
rom and it worked fine
call screen worked and keypad as well
i installed the BSB tweaks and cookie tab home
and getting same thing now the whole call screen is inactive
cant even push the hardware end button to end the call
and an error popped out:
a problem has occured with cprog.exe
the phone is very buggy in general with the cookie tab and bsbtweaks
ok so i just tested with both of them setup separately and both of them make my phone screen go stupid.
with bsb tweaks it doesnt turn on at all
with cookie tab it calls but then none of the buttons work on it not even hardware end call...
god damn i hate this phone, less than a week i own it and im about to throw it at the wall.
is anything supposed to work with microsoft at all?
wtf is active about active sync? it takes 50 tries to get one connection
sorry for the language but this is relaly fn frustrating.
fuzzysig said:
didnt tweak anything ust used bsb tweaks and changed it back to normal still same... 3 phones cant be all having same issues
Click to expand...
Click to collapse
fuzzysig said:
i installed the BSB tweaks and cookie tab home ...
and getting same thing now the whole call screen is inactive ...
Click to expand...
Click to collapse
fuzzysig said:
...with bsb tweaks it doesnt turn on at all...
Click to expand...
Click to collapse
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
You returned the phone twice because you keep installing an incompatible program and getting an error????????? Then why do you keep installing that program??????????? You're giving WindowsMobile users a bad name.
*HINT 1:Check what date BSBTWEAK was made. IT IS NOT MADE FOR THE TMO USA HD2! If somehow you feel you must use it, DO NOT FIDDLE WITH THE "TAP TIME" SETTING WITHIN BSBTWEAK.
*HINT 2: DISABLE COokie's Home Tab Lockscreen, it causes more trouble than it's worth.
Quote from the BSBtreak thread:
heybhouse said:
Edwin320 said:
Hello all! ...
I installed BsB onto my phone and it worked fine. I installed it on my wife's phone, and altering the Tap Time resulted in her screen not responding to the icons (speaker phone, hold, etc) while in a call. My phone did not have that problem. I did a hard reset and reinstalled everything except BsB and her phone is now fine ...
Click to expand...
Click to collapse
"in case this helps anyone: one of the tweaks would free my phone when in a call (not the whole phone, just the phone screen) so i couldn't bring up a the keypad or go to speakerphone, etc. I figured out it was the "tap time" tweak. i'm using the usa t-mobile hd2." (pg. 117) haven't seen the menu issue but if you have it backed up might as well save time and do the hard reset. i wonder if chainfire might be the issue there.
Click to expand...
Click to collapse
why doesnt it say anything about beeing incompatible in BSBtweaks post by the author himself?
aaaaaaaaaaaaaaaaaaaaaa back at you...
dude please dont help me anymore you really suck at it
THIS>>>>>>>"DO NOT CHANGE THAT BSBTWEAK SETTING!!!!!!!!"
DOES NOT HAVE SAME MEANING AS
THIS>>> DO NOT INSTALL BSBTWEAK!!!!!!!!!!!!!!!!!!
thats if you didnt understand
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
stlfx said:
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
Click to expand...
Click to collapse
I hope this helps someone else.
The OP doesn't take suggestions well. He just comes on here to vent about how he can't make his phone work.
I have been trying to set up a VoIP client on my Windows Mobile phone for a long time, starting with the HTC Wizard which I could never get to work.
I have finally managed to get a VoIP client with a really nice interface working on several phones that I have tried it on.
I am using ViaTalk as my provider but it should work with any VoIP provider.
It works great (with a slight delay, nothing that I can't live with) on an unlocked HTC Sprint Touch Pro 2, a T-Mobile HD2, a HTC Diamond and an HTC Fuze.
The application is by NCH software out of Australia and it is free to use, or if you want to unlock all of the features of the application, download and register the business edition.
Here is the URL for the download:
http://www.nch.com.au/talk/pocket.html
Or if you would like, PM me and I will be happy to send it to you as an attachment to an email.
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
hecthork said:
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
Click to expand...
Click to collapse
I am using the paid version but the only difference is that it unlocks some additional features that most people proably don't need anyway.
It is not trialware so it has no expiration.
thx you man, i'm trying this app since yesterday; works good!! easy to configurate, i'm using the free version because; i don't have 2 line, i don't use conferente mode... but it will be interesting trying these features xD
How does this app compare to AgePhone?
Hello,
why not to give a try to PortGo !
http://www.portsip.com/softphone.htm
The free version is sufficient and very simple to use, even with several providers (I currently use 2). Skin and language are easy to adapt if necessary (I've made it for French), see also here http://forum.xda-developers.com/showthread.php?t=508715
Dangze
bobzero said:
How does this app compare to AgePhone?
Click to expand...
Click to collapse
I really couldn't tell because I have never tried AgePhone.
I have tried most of the different VoIP clients mentioned throughout this site but I have never been able to get one to work right until I tried this one.
It could be that I am too stupid to configure them right or it could also be that they simply don't work very well, I can't say.
As for PortSIP, I never got it to work right and the developer dropped off line a while back as far as I can remember.
This little VoIP client that I am using has got a clean interphase, it is easy to configure, it does not require any special "helper" apps. so I am happy with it.
Hope that some of you enjoy it too.
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
ardec1 said:
{R^7Z trim]
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
Click to expand...
Click to collapse
I have mine set so that the light always stays on until I turn it off(I turn off auto back-light, my preference). So, no issues there. Additionally, I think there is a setting or app that will allow WiFi to run even while the phone sleeps. Or perhaps it is set into a low-power mode until the power key is pressed?
Howto in France ?
It seems great but how could I make it work in France.
My provider (mobile or at home) is SFR.
Thanks in advance to all for your answers.
Setup file attached to original post
I finally got around to attaching the setup file to my original post so it can now be downloaded directly from this site
Hi,
I suggest to please change the title to "Express Talk for WM".
I already tested it on my Ultimate 8502. I can call but can not receive incoming call. It ring but after receiving, it stop ringing with no active call and no sound. Any solution?
thanks
sadat007
After installing Pocket Talk and configuring it I get the message that my handheld device is blocking UDP port no 8000 and 5060. Of course it isn't but I can't make callas. Has anyone had the same problem?
installation unsuccessful
It fails to install for me...
I connect my HTC Mega (Windows Mobile 6.5, moded rom), I start the setup, my phones screen shows the installer but than says "Installation of NCH Swift Sound Pocket Talk.CAB was unsuccessful"
Doesnt matter if I choose MainMemory of StorageCard.. there is plenty of free space on both of them.
Any Ideas? Are there any prerequisites? I checked the NCH forum but couldnt find any help...
PS: trying to install directly from the .cab it leaves on my storage card wont work either
Hi sorry for my bad english, setup doesn't work on my hd2 why???
Franky24 said:
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
Click to expand...
Click to collapse
Myself some hours ago said:
I'm also using WMVoIP and my phone is enabled by default to use VoIP when wi-fi gets enough data traffic, so I don't need other VoIP apps except for second lined. Usually I switched off the phone radio and whitched on the wifi radio and VoIP wasd enabled as default phone line.
But my problem is now I can use VoIP over 3G at no penalization from my phone provider, and I can't set my phone to use VoIP by default.
Is there a way to set VoIP the first option and phone the second one, using 3G (not wifi) ?
Click to expand...
Click to collapse
Editing: I found this xda-dev's app here: http://forum.xda-developers.com/showthread.php?t=730303 and it works fine with one SIP line, in my Kaiser, even using 3G instead of wifi.
Thanks !
It works fine on my HTC Touch Pro cdma with wm6.1.
But I don't like the fact I can't use my original contact list...
Hey Guys,
Im wondering what would be better for me, Im based in the UK and I want to know if Using a VoIP Service such as Skype or get a Dedicated Phone line put into my address? what do you guys think?
- David Scheme