i would liketo buy it
but it does not say its compatible with Tytn/Hermes
actually what the story inside?
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
I've a Wired Remote Controller dopod S1 bought to ebay.
Unfortunatelly my Tytn don't recognize this rc-w100... exist a full working driver for TYTN alias Hermes????
I've downloaded the official driver and i extracted and installed "manually" all the singular cab files!!!!
The results is listed above:
all the Remote_controller_Y-cable_Ax files, the Y-cable_B1_070323 and the Y-cable_E1_070323 and don't works and they produces a blank screen after the reset (so i have made an hard reset everytimes!)
Remote_controller_P1_070316.cab and the Y-cable_HERM1_070316.cab don't make any changes and the rc-w100 isn't recognized at all!
Remote_controller_AT1_070316.cab mute all the sound alsoo if i disconnect the RC-W100
Only with Remote_controller_Y-cable_T1_070316.cab the RC-W100 is recognized as a simple headphone
SO DON'T EXIST A FULL WORKING FUC***NG DRIVER!!!????
i'm desperate...
note:sorry for my baaaad english
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Pfeffa-rah, what other cheaper solution that u are talking about? I am interested.
Thanks in advance.
7wolf said:
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
Click to expand...
Click to collapse
Hi, Could you send me that W100 remote driver as I cannot find it. I have x2 tytn ii and it works on one and not the other... Thanks, J
w100
yeah i could do with that driver too.
E100 Driver cabinets, anyone?
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
wazmo said:
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
Click to expand...
Click to collapse
Never mind-I got 'em all by doing an install on my XP laptop with my device disconnected.
Who sez XP is junk?
Driver
Can someone put up the driver for the rc-w100? Couldnt find one on the official site. Tried googling but its nowhere to be found. Bought it on ebay, checked the "compatibility list" and my VOX is there. This kinda sucks.
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
hykq said:
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
Click to expand...
Click to collapse
Too late-I returned it.
But thanks for the heads-up-maybe someone else will use your info.
HTClugin?
Hi, any chance u can upload ur version of the plugin? thx
Where can the htc music plug-in 1.0 be found ?
Yeah, same question. I've just bought W100 and it's not woring on Schap's 4.31 ROM. Ideas.
download for the driver,now missing in htc support this fix
plese upload this file!!!!!!!!!!!!!!
I cant use RC E100 on my herm100. There is no any sound on ;-(
Any solution?
W100/E100: HTC's Achilles Heels
Don't buy those remote controllers.
Simples!!!!!!
THis file will enable you to listen to music, buttons doesnt work though... Is there anyone who has an idea how to make the buttons work?
Related
This merged English version of WM2003SE is compiled for the Australian model O2 XDA II.
:!: NOTE: It is supplied as is. Use it at your own risk!!!
:idea: TIP: First backup your data and settings using either ActiveSync, SDBackup or XBackup - then download the attached ROM_Backup.zip - extract and follow the instructions in the ROM backup folder.
To install the merged WM2003SE:
1. Download the attached Setup.exe
2. Insert your O2 XDA II into it's USB cradle and confirm that a successful USB connection has been made with your PC
3. Run Setup.exe and follow the onscreen prompts.
Details:
The ROM image is based on version: 2.06.00WWE (ver 4.21.1088 build 14132)
The Radio image is version: 1.18.00
The Extended ROM image is a variance of version 2.06.100a (Sin.Merged.v1.0)
The Extended ROM contains the following:
Merge of ROM 2.02.t1WWE over ROM 2.06.00WWE, pre-configured with:
AltTab, Blackberry, Caller ID, Camera, ClearType Landscape, ClearType Tuner, ClearVue, CMD, Contacts, Explorer, ExtROM Tools, Flash, Fonts, IE Tools, IntelliDialer, Keyboard Extension, Midi Ringtone, MMS Composer, MS Reader, Notepad, O2 Customisations, Paint, Print, RegEdit, Reset, Rotate Screen, Run, Scheduled Tasks, Space Invaders, Task Manager, Tray Launch, Video MMS, WiFi & BT Headset/Handsfree Profiles.
The Autoconfig only contains support for the following Australian Carriers: - Optus, Telstra & Vodafone + "Not Listed - Set Manually"
KNOWN ISSUES:
Today Screen BT Profile Icon likes to play Hide'n'seek
BT HandsFree Mode may disable headset mic.
A choice of either HandsFree or Headset profile is now enabled, please select only one or the other.
NOTE: BT HandsFree Mode may disable headset mic
Uninstall "Version Sin.BT.Handsfree" from "Settings->Remove Programs" if necessary.
:arrow: INFO: New version is here!
Thanks very much Sin!
Been Looking forward to this SiN! Made my weekend!
Thank Sin for putting it together.
I originally Had and Orange SPV M1000, and upgraded it with the O2 1.72 version, in the hope that it would sort out the problems with Blue Tooth and Handsfree car kits, which it did not of course.
Thought I would try the rom from Mystery Man, which interestingly did not require any changes to the files to allow it to update, which also did not work the blue tooth, so I was going to try just updating the Radio to 1.18, but saw your new package pop up, so thought what the hell, give it a go, and now I am made up cos been very frustrated that it would not work in car kit.
The car kit I have is the Nokia CK-7W Blue tooth if this helps anyone else, I also assume it will work with the others, in particualr the built in ones in BMW's.
So thanks again everyone, I can sleep now.
Mark
Other known issues..
Thanks for the job SIN!
I have to point out a couple of issues I'm having since long, that seem related to the BT problem, but looks like no one else is having: "DUAL STEREO" sound in both (XDA II and Handsfree/headset) devices.
No matter BT headset is "enabled" or "disabled", the devices configured as "handsfree" are operational. Plus, my HBH 35 headset refuses to work unless configured as a handsfree device. After that, every handsfree device works in "STEREO" mode. Nice for multi part conferences, but annoying for your caller, who hears every tap on the XDA in your pocket, since the mic is operational no matter what.
I'm really the only one with this problem?
:?:
Hi Sin
Just a quick question, tried to change the splash1 & 2 images, to get away fro O2 image you put into file, but having probs with corrupted display if the image, howd you do it please, as I understand the normal method does not work with Chinese and Trial versions !
Many thanks in advance.
Mark
BTHFP
Does the headset mic work on handsfree profile Sin?
thanks Sin
I tried to modify the extended ROM to modify the provider list but couldn't found the autoconfig.txt, is it ok to create autoconfig and put it there? or did you merged the autoconfig inside Sin.Merged.v1.0.cab?
please let me know
thanks
Brumie
Re: Other known issues..
Looking Glass,
Your not the only one with this problem.
I have a bmw with bluetooth and it does the dual stero trick.
I have a Bluespoon Digital and it also does the dual stereo trick.
Has any one tried removing the head set profile and leaving just the hands free
Thanks
Jon
hai where can i download the attachment? i need to upgrade my xda2 urgently.. thanks.
Other Bluetooth Devices
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Re: Other known issues..
"I have a bmw with bluetooth and it does the dual stero trick
Click to expand...
Click to collapse
I just tried the car again and it worked perfectly. So it looks like I only have the problem with the Bluespoon.
I'm pretty happy with the car working as that was what I really wanted.
Johnson..... you have to log in then you will find the attchments at the bottom of the first post in this thread.
Guest... I dont have a bluetooth GPS. Ive no idea if it works. I do know you cant get the Sandisk WiFi SD card to work which is a bummer.
Jon
ExtendedROM...
@ Sin,
This merge ROM version of yours, what is the most very important file that I need to keep on my extended_ROM? Last time I used your version without any problem But I need to remove some CAB file for my own customization. But now seems that ms_.nbf has only one file (Sin.Merged.v1.0.cab) which I think all the CAB file was in there.
Is it possible to gave us your merge CAB without the rest of installed program? Or is it okay to delete some CAB on extended_ROM after installation (cooked-own ROM style)?
Thanks!
Re: Other Bluetooth Devices
Anonymous said:
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Click to expand...
Click to collapse
What ROM are you using now? I used to have 1.72 ROM and I need to used Bluetooth tools to be able to use both BT headset and BT GPS (Belkin/rebadge Fortuna Clip-on). BUT with ROM 2.06 (mysteryman), Sin.AU.v3.5(extended_ROM) and 2.02t1 Reg CABv3.cab (from henrylim). I am no longger needed bluetooth tools, it works without any issue.
file mentioned can be found here:
http://forum.xda-developers.com/viewtopic.php?t=13660&postdays=0&postorder=asc&start=50
Hope this help. I haven't tried Sin.merge.v1.0 yet but I will soon.
Re: Other known issues..
916senna said:
Looking Glass,
Your not the only one with this problem.
I have a bmw with bluetooth and it does the dual stero trick.
I have a Bluespoon Digital and it also does the dual stereo trick.
Has any one tried removing the head set profile and leaving just the hands free
Thanks
Jon
Click to expand...
Click to collapse
Nice to know, thanks for info, I was about to think no one else has the problem.
I've been experimenting during the weekend, and found that the problem remains quite the same: some headsets/handsfree only work if the HandsFree profile is selected, and then the "dual stereo" problem arises again.
By contrast, version 2.20 properly handles every "audio" device (at least my devices) but I haven't found how to made BT ActiveSync back to life. Plus the other known issues with the translation (May I help Buzz_lightyear?)
Resume: Excellent job by Sin (regards) but the whole BT thing is not yet fixed. I like his "new compact" Ext Rom, but since HandsFree profile is at this time more important to me than BT ActiveSync, I'm going back to 2.20.
Not there yet...
with WMP 10
in rom, with wmp 10 ?
Re: with WMP 10
bos_xda_II said:
in rom, with wmp 10 ?
Click to expand...
Click to collapse
Only 2.20 comes with wmp 10. Sin's rom has version 9.
Not there yet...
Re: Other Bluetooth Devices
Anonymous said:
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Click to expand...
Click to collapse
I have a CoPilot Bluetooth GPS unit and it does not need Bluetooth Tools to get it to work via serial port emulation. I'm using 2.06 ROM.
With the BT GPS bonding, you get to say you want it to be a serial port but you don't get to specify what specific port number like with Bluetooth tools. This is not a problem with CoPilot software as it will FIND the serial port and baud rate in it's Bluetooth connection/configuration setup.
I also have a SanDisk SDIO WiFi card which also works fine (note the card is NOT the SDIO RAM+WiFi though!).
Re: Other known issues..
916senna said:
"I have a bmw with bluetooth and it does the dual stero trick
Click to expand...
Click to collapse
I just tried the car again and it worked perfectly. So it looks like I only have the problem with the Bluespoon.
I'm pretty happy with the car working as that was what I really wanted.
......
Jon
Click to expand...
Click to collapse
Hi again!
How exactly did you get to eliminate de "Dual stereo" effect in your carkit? I have too a HBH 35 headset and the problem remains on both of them.
This is my only complain, everything else works so well! And Sin made such a good job putting the Ext Rom together!
Thanks Sin for the easy to install ROM.. well done.
My Bluetooth GPS works fine, a bit of a change not having to select a port, but the port is displayed so that wasn't a problem.
My Logitech Headset refuses to work. It pairs with the XDAII but I am unable to iniate a call from the headset and the mic doesn't work.
The Bluetooth smybol is gone from the task bar too... probably something I did...
Is there a cab about that allows me to reinstall the bluetooth section just in case I stuffed somethign up?
Thanks.
Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????
My S200 has been repaired (new motherboard) and I re-installed Korand 3.1 rom and restored everything, but A2DP is not working any more with my Jabra 620 stereo headset. I tried other roms such as ROM Prophet My Green Edition ROM 2, but still no A2DP.
I don't understand the problem and I don't find a solution. When I try to connect using the batterystatus function, I get the message "failed to connect to device). I never had to connect it, since I normally get the sound that it is connected using A2DP and a logo is displayed in the top. I also tried with radio 2.19 instead of 2.47, same result.
Any ideas?
Problem solved
Hi the problem is solved! I installed a bt a2dp protocol that I found here [wm6.1] My Little Green
It would be nice, if you would share this protocol with us.
Can you upload it somewere cause i have bt probs too.
Thank you
skylow said:
It would be nice, if you would share this protocol with us.
Can you upload it somewere cause i have bt probs too.
Thank you
Click to expand...
Click to collapse
It has been shared with us two month ago already.....
http://forum.xda-developers.com/showthread.php?t=382263
Thanks bro
I have a problem, I tried it several times to connect my HTC Touch Pro Trough Bleutooth with my Pioneer AVIC D3, but with out succes, My Avic D3 is seeing a Device but with out a name I know it's my Touch pro ,but some how the Handsfree fuinction does not work de Bleutooth audio funciton works but I have to pair it every time when I start my car, the differenc is when I use my old Sony ericsson W900I, every thing works perfect, with no problem it even connects automaticly, but with my HTC Touch Pro and my HTC X7501 without succes, can somebody help me with this problem, because I have this problem for a year all ready,
With greetings from the netherlands Iwan
Hey Iwan in the Netherlands,
I don't have the pioneer, but did play with one in the store recently. I know your trying to pair the phone to the radio, but actually, I think it should be the other way around. Try this:
Set the radio on discovery
Using the HTC, search for new devices
The radio's model number should appear
Check both boxes for audio streaming and hands free.
Hope this helps & works.
moe1up said:
Hey Iwan in the Netherlands,
I don't have the pioneer, but did play with one in the store recently. I know your trying to pair the phone to the radio, but actually, I think it should be the other way around. Try this:
Set the radio on discovery
Using the HTC, search for new devices
The radio's model number should appear
Check both boxes for audio streaming and hands free.
Hope this helps & works.
Click to expand...
Click to collapse
I tried this already but after that I found the pioneer,I checked both boxes, for audio streaming and handsfree but some how the handsfree function won't work, so I don't know what this Could be, somebody help me please
You need to use Jetware. http://www.jetwaremobile.com
Works for me, same two devices.
bigray327 said:
You need to use Jetware. http://www.jetwaremobile.com
Works for me, same two devices.
Click to expand...
Click to collapse
Yep, same here worth the $$ I have the avic-d3 with the bluetooth addon, it even streams the bluetooth audio mp3's. Unable to sync the phone book though.
I use this ROM http://forum.xda-developers.com/showthread.php?t=558691 and I bought a RC E100.
My problem is that it only works with WMP and not with TouchFlo or FMRadio. I tried to install the Driver but the setup says that the driver is already installed. Does anyone have the cab version for this or can say where the installer places the cab on HDD? (Maybe someone could copy the original files from TD2 stock rom?)
Call, End are working normal,
|<<, >>|, >|| only in WMP,
-, + only in WMP and not for the whole device,
MUTE doensn't work at all.
creutzwald1105 said:
I use this ROM http://forum.xda-developers.com/showthread.php?t=558691 and I bought a RC E100.
My problem is that it only works with WMP and not with TouchFlo or FMRadio. I tried to install the Driver but the setup says that the driver is already installed. Does anyone have the cab version for this or can say where the installer places the cab on HDD? (Maybe someone could copy the original files from TD2 stock rom?)
Call, End are working normal,
|<<, >>|, >|| only in WMP,
-, + only in WMP and not for the whole device,
MUTE doensn't work at all.
Click to expand...
Click to collapse
It works on my TD2. I once had a problem with this though on my Diamond (1). This was caused by using Touch Flo Detacher though. Are you using something similar?
i've got the same problem with my bluetooth headset (call and phonebook access work, the rest jumps to WMP.
I'm fairly certain it's a custom ROM thing. (unless the chef specifically made sure to keep external music input working for Touch Flo and not WMP)
i am very interested if there is a fix for this.
it is indeed a bug with custom roms, the official 6.5 ROM works perfectly with the RC E100 on my diamond 2. and so do all custom rom which does NOT use Sense. Manila 2.1 worked with alle custom roms i had, unfortunately the chefs dont care about this so ill stick with stock 6.5 rom, btw.. the mediaplayer isnt THAT bad to use with the RC E100 - its just ugly.
flexo86 said:
btw.. the mediaplayer isnt THAT bad to use with the RC E100 - its just ugly.
Click to expand...
Click to collapse
actually, i've compared audio quality...it IS worse
there is a distinct lack of bass.
Dutty's new ROM works!
here: http://forum.xda-developers.com/showthread.php?t=579076