GPS Launcher - Mogul, XV6800 ROM Development

Update: Written up here due to PPCGeeks being down.
Version: 0.1 Test 1
BAF's GPS Launcher allows you to run GPS software that is not coded for the GPS intermediary driver without running Google Maps, Holodux, QuickGPS, etc in the background. On the first run, you will configure the path to your GPS program's exe file, and the timeout.
The path to the exe should be the FULL path (ex: \Program Files\iGo\iGo.exe). The timeout specifies how long the launcher will keep the GPS port opened for the software you are launching. The application has to open on Com 4 (9600 baud) before the timeout for it to remain active. After the timeout, the launcher will close it's open GPS ports and exit, leaving just your GPS software running with GPS working.
If you need to reconfigure, either edit \bafgpsconfig.txt (first line is program, second line is timeout) or delete said text file to have the program show the configuration GUI. Make sure you click the save button on the config page, as that is the only way it will save (out of me overlooking the close button trying to get this released).
The exe can be found here. Just copy it anyplace on your device and run it.
Bug reports and suggestions are nice, but future versions of this app will not be in the form it is now. It will eventually become a background service that opens the GPS as necessary, but for now it is just a launcher.

ppcgeeks is jacked any place else to ge this app?

danewguy said:
ppcgeeks is jacked any place else to ge this app?
Click to expand...
Click to collapse
Yes, that'd be sweet. I've been trying to get this for the past couple of hours.

yea can u gimme the name of the app or put a link on this site bc ppcgeek is down

http://code.baf.cc/bafgpsv01t.exe is the link didnt try it yet

work really well for tomtom

Updated the OP with the basic gist of what was posted at ppcgeeks.

Great work Baffles, can you make the app keep running until at least 2-3 satellite constantly show up instead of 20 second. The app should keep run in the background when destinate gps app (tomtom) is currently and when tomtom close, it close it self as well. The reason I ask for this is when I turn off the screen and turn back on the screen while tomtom is running, the gps connection is lost that cannot come backup.

Does not work for me. I set up the config file to point to the installed location of Tom Tom and timeout set to 60 seconds.
I started the Bafgps app and after a few seconds it launches Tom Tom, I have setup TT to use other NMEA GPS receiver with 4800 baud rate and COM4
TT always displays No GPS Device, after a second try with bafgpsv01t the system locks up and I need to soft reset.
I followed the GPS setup on the titan from this post http://forum.xda-developers.com/showthread.php?t=363431
what gives? No chip on my XV6800?

Scratch the not having a gps on my titan i got it to work with GPS viewer 1.5

AstronusX said:
Great work Baffles, can you make the app keep running until at least 2-3 satellite constantly show up instead of 20 second. The app should keep run in the background when destinate gps app (tomtom) is currently and when tomtom close, it close it self as well. The reason I ask for this is when I turn off the screen and turn back on the screen while tomtom is running, the gps connection is lost that cannot come backup.
Click to expand...
Click to collapse
The new version will be able to keep GPS up the whole time an app is running. I should have an updated version out sometime late tonight.

Looks and sounds great Baffles... We look forward to the new release!

Related

GPS Hell

I've read just about every GPS related post on this board, and I haven't found a solution.
I've got a Verizon XV6800 with DCD 3.2.3 (also tried 3.2.2) Radio version 3.42.30 (also tried 3.39.10 and 3.42.02) with Bootloader 2.47 (also tried 2.40). I've done the titan GPS fix. I have never gotten a GPS lock on even one satellite! I've tried this in the middle of a parking lot on a clear day while standing outside my car for 30 minutes.
I'm looking at GPSViewer (holux) and it sometimes shows satellites (not locked; in red) but after about a minute that disappears and I get nothing. The Satellite's always show over the N on the "GPS Status" page. GoogleMaps never shows a satellite only "Searching for Satellites (0)..."
Now I've just noticed that I'm indoors (in the middle of a building) and GPSViewer still occasionally shows a satellite (in red) and then it disappears.
I've tried the *228,2 and the *22899, I've flashed the radio rom with bootloader 2.40 and 2.47.
Can anyone think of anything else to try? Is it just me?
Thanks in advance.
121mhz said:
I've read just about every GPS related post on this board, and I haven't found a solution.
I've got a Verizon XV6800 with DCD 3.2.3 (also tried 3.2.2) Radio version 3.42.30 (also tried 3.39.10 and 3.42.02) with Bootloader 2.47 (also tried 2.40). I've done the titan GPS fix. I have never gotten a GPS lock on even one satellite! I've tried this in the middle of a parking lot on a clear day while standing outside my car for 30 minutes.
I'm looking at GPSViewer (holux) and it sometimes shows satellites (not locked; in red) but after about a minute that disappears and I get nothing. The Satellite's always show over the N on the "GPS Status" page. GoogleMaps never shows a satellite only "Searching for Satellites (0)..."
Now I've just noticed that I'm indoors (in the middle of a building) and GPSViewer still occasionally shows a satellite (in red) and then it disappears.
I've tried the *228,2 and the *22899, I've flashed the radio rom with bootloader 2.40 and 2.47.
Can anyone think of anything else to try? Is it just me?
Thanks in advance.
Click to expand...
Click to collapse
is Location set to 'On'?
External GPS Settings to COM 4 and Baud 4800?
GPS Settings correct in Google Maps?
Sorry, my mistake for not mentioning that.
Yes, Location is on. And Com4, 4800.
Googlemaps is setup to use the Windows GPS (Start->programs->External GPS)
are you positive you did the GPS fix correctly? if you open that port in QPST again and read from phone, are call the gpsOne settings as they were when you applied the fix?
Yep, all nine boxes are checked and when I closed the QPST and opened again, did the re-read and sure enough all 9 boxes are still checked.
121mhz said:
Yep, all nine boxes are checked and when I closed the QPST and opened again, did the re-read and sure enough all 9 boxes are still checked.
Click to expand...
Click to collapse
i would try a reflash.
reflash dcd 2.3.3.
install carrier cab
reflash radio
check all settings
*228 2
*22899
theres no reason why that shouldnt work for you. if it doesnt, then there is a hardware issue.
something else you may wanna try is using COM 5 instead of 4. its a long shot, but on my first 6800 the GPS was on COM 5 for some reason.
First, did you follow this link here to the letter?
If so, did you try using HTC GPS tool like GC states here?
Com4/baud rate 4800/Clear Memory
Click Open, then click Nav. Init.
Then you need to wait for three or more red bars, then open the GPS program of your choice.
121, I attached the tool for you as well.
I did not try the HTC GPS tool, but the link you gave me goes to like 261 posts. I've read through most of them before, and followed #1 (I didn't download the third tool, the launcher, because I'm trying to use Google Maps, not TomTom).
Just tried the GPS tool and it doesn't seem to do much better. I see satellites for a little while but they don't lock.
I did not try the HTC GPS tool, but the link you gave me goes to like 261 posts. I've read through most of them before, and followed #1 (I didn't download the third tool, the launcher, because I'm trying to use Google Maps, not TomTom).
Just tried the GPS tool and it doesn't seem to do much better. I see satellites for a little while but they don't lock.
Click to expand...
Click to collapse
Did you follow my instructions on how to lock with QuickGPS and GPS Tool?
My phone's acting very similar the sat's will be red and it'll take up to 30 mins to get a lock. The htc gps tool made it a lock a couple minutes faster but live search would take forever to start with gps tool running. taking 20 mins to lock makes it almost worthless. You should reflash and leave it running in your car or something for a hour and maybe you'll get a lock.
Hmm maybe I should make a youtube video of exactly what I do...because I'm noticing no issues.
I did try your instructions. Got two half full red bars, then they disappeared, never to return. The Information screen never populated with GPS location info and stayed in Mode 2, No position information for the whole time.
I will try shield's recommendation.
where are you located?
I'm still getting used to using mine but I'm wondering if the differences users see are the individual phones or the locations they are using them in. I bought a VX6800 a few weeks back and discovered these forums about a week later. I flashed my phone this past weekend (Olipro 2.40, Radio 3.42.30, and DCD 3.2.3). I then installed HTC GPS tool and Tom Tom 7 to start my experimenting.
My first test was HTC GPS tool in my back yard. It started picking up satellites after about a minute..then did red bars...then green bars..maybe two minutes total. I closed the tool and launched Tom Tom and it had satellites and was ready to go in about a minute.
Yesterday I launched Tom Tom in my driveway (front of the house ) before I left for work and it had a lock in the time it took me to enter in a POI for the train station. It guided me to the station and displayed accurate location and vehicle speed the whole way there.
When I got back to the station after work I launched Tom Tom to test it again on the way home. I waited a minute and it didn't lock so I started driving. I got halfway home with no lock so I closed Tom Tom and launched HTC GPS tool. It locked after a while and I launched Tom Tom which was then ready to go for the last leg of the trip.
This morning when I got in the car I launched Tom Tom directly again and it had a lock before I put in my POI, just like yesterday. I'm going to try again when I get back to the train station tonight.
I haven't reset or turned off my phone since I finished all of the flashing and installing this weekend. I'm curious if the GPS remembers the last satellites it saw or if I just have easy locking in front of my house and crappy signal down at the train station. As I get more into this I'll look into QuickGPS. I've also seen at least two threads mentioning reflashing the radio after flashing the ROM and setting up the carrier...I'm wondering if this helps as well and may give it a shot next weekend as I continue tinkering.
HayireII said:
I'm still getting used to using mine but I'm wondering if the differences users see are the individual phones or the locations they are using them in. I bought a VX6800 a few weeks back and discovered these forums about a week later. I flashed my phone this past weekend (Olipro 2.40, Radio 3.42.30, and DCD 3.2.3). I then installed HTC GPS tool and Tom Tom 7 to start my experimenting.
My first test was HTC GPS tool in my back yard. It started picking up satellites after about a minute..then did red bars...then green bars..maybe two minutes total. I closed the tool and launched Tom Tom and it had satellites and was ready to go in about a minute.
Yesterday I launched Tom Tom in my driveway (front of the house ) before I left for work and it had a lock in the time it took me to enter in a POI for the train station. It guided me to the station and displayed accurate location and vehicle speed the whole way there.
When I got back to the station after work I launched Tom Tom to test it again on the way home. I waited a minute and it didn't lock so I started driving. I got halfway home with no lock so I closed Tom Tom and launched HTC GPS tool. It locked after a while and I launched Tom Tom which was then ready to go for the last leg of the trip.
This morning when I got in the car I launched Tom Tom directly again and it had a lock before I put in my POI, just like yesterday. I'm going to try again when I get back to the train station tonight.
I haven't reset or turned off my phone since I finished all of the flashing and installing this weekend. I'm curious if the GPS remembers the last satellites it saw or if I just have easy locking in front of my house and crappy signal down at the train station. As I get more into this I'll look into QuickGPS. I've also seen at least two threads mentioning reflashing the radio after flashing the ROM and setting up the carrier...I'm wondering if this helps as well and may give it a shot next weekend as I continue tinkering.
Click to expand...
Click to collapse
you should just soft reset your phone. more than likely the COM port is just locked up and needs to be released before it will work again. you should prime TT7 with GPS Tool or Google Maps to save yourself time. don't worry about any reflashing yet it sounds like you have everything already running correctly. just soft reset and try to lock with GPS Tool or another primer. when you close out any GPS apps, make sure you turn off the gps in the application then close it properly to help keep the COM port open. if you put your phone in standby while a GPS app is running or close the app with GPS still running, it could lock it up which needs a soft reset.
I use GC process and found it works for me. But as a Sys Tech Engineer I have found identical equipment does not all behave the same...
I do the GPS Tool, wait for 3-bars, Goolge maps, etc...and I get a lock. HOWEVER, I do a bit more. Seeing that this is Windows crappy OS I start with a full power down & up each day. Then I do the quick GPS to get updated GPS info (make sure you have a data connection going...ie open Explorer first then close it). Then I follow GC step exactly in another post as I stated above...connect. Sometimes it is about a minute or less but no more than 3-4.
Now I am very confident this works as GC tells us with the newest rom & radio. I am on rom 3.22 radio 3.42.30... I found for ME...I said ME and my area radio 3.39 (I downgraded to this one recently) gave me better results although his newer radio IS MUCH better than 3.39...as I stated before all devices look identical but they do not all behave the same..
The very last time I used it (this morning) I had almost instant lock with no primining; just launching Tom Tom. I'm not trying to troubleshoot anything at this point just experimenting and comparing experiences. If I don't get a quick lock when I get back to the train station tonight I will probably set it up to follow gc14's method tomorrow night and compare the results.
I don't know if I'll wind up adding anything valuable to this thread or not but when I'm looking to do this stuff for the first time I like to read as many details about other people's experiences as I can. I have a feeling in the long run I'll wind up using gc14's method as long as I get the same results.
Brooklyn, NY (NYC)
This is what I do to get a lock:
* Soft reset
* Connect to Internet
* Update QuickGPS
* Run HTC GPS Tool (Open port)
I do that or I never get a lock.
I have an XV6800, DCD 3.2.3, radio 3.42.30, and no priming software. I use google maps alone and get a lock usually within a minute.
I helped set up a friends XV6800 the same way, using the identical files (ROM, Radio, carrier cab, etc...) and he has the worst lock times. He can go days without ever succeeding in locking sattelites using google maps.
I would be willing to bet the devices are from different production runs and have one atom off in the chipset somewhere and that is the difference.
Thats totally a rant on my part, I doubt that is the actual case, but I notice occaisionally activesync pops up and stops my GPS from working. As soon as I close active sync and go to google maps and uncheck "use gps" and check it again it starts working again. I am probably crazy but so far that seems to be the only thing stopping my device from locking gps when active.
I am not very smart, but if the same files do not work on the same type, brand, etc.. phone then i would have to say that it must be some kind of small hardware issue.

Alltel Touch Pro and GPS - are there issues?

Hey guys,
Can you tell me if there is an "issue" with the GPS on the Alltel Touch Pro phones? These are fairly new phones and have only been out for a couple weeks so there may not be a lot of info available but it sure seems to me there are some issues here.
I'm on my 3rd phone. First phone was probably OK but since it was new and nobody in the area was familiar with it, everyone thought the speakerphone speaker was defective... turns out it just sucks but that's in a different thread. On the 2nd phone we noticed at the Alltel store the signal kept dropping out completely and then coming back. Also I dropped a call, looked at the phone and it showed no bars in a very good signal reception area. That coupled with I couldn't get the GPS to reliably work, Alltel swapped out the phone again for me thinking the GPS was defective. Well, third one might be worse!!!???
I have verified I have the 911 location settings turned ON.
I have run QuickGPS and downloaded the data.
On the 2nd phone after several days of trying it off and on and having zero success I decided to get the $9.99 monthly Alltel app. It did indicate a weak signal but eventually picked up my location. Hmm??? I then went into Google Maps and it too was seeing around 10 satellites. Why could I not get it to see any satellites for days then as soon as I paid for the monthly Alltel app it "kinda" worked??? I say "kinda" because after that being able to lock onto satellites even in an open field was very iffy. So, I took the Alltel GPS app off the phone and did a hard reset because I still couldn't consistently get any satellites. After the hard reset I tried again with Google Maps and nothing. I then downloaded GPS Test and it immediately found several satellites??? I then started up Google Maps and then it immediately started working too?!? During all this I installed TomTom Navigator 5 (own that so thought I'd try it) and it too was "iffy" if it would find any satellites but it did connect so long as I had the GPS Test program running in the background. I could live with that but even with the GPS Test program running in the background on the 2nd phone it wasn't at all consistent even outside in an open field. What I find odd though is that the GPS seems to "stick" and the GPS Test program was "unsticking" the locked up GPS... but not reliably.
Now for the 3rd phone. Get the 3rd phone this morning and immediately download Google Maps, turn on location settings, and do the Quick GPS. Do a soft reset and try out Google Maps in a parking lot. NOTHING again after over 10 minutes. CRAP! Downloaded GPS Test and now on this phone I'm only getting "GPS starting up" with one yellow bar. I can't even get GPS Test to work now but it finds the GPS and acts like it is trying to lock on to satellites. On both phones it was defaulting to 9600 baud. Seemed to not make a difference if I select 9600 or 4800... when it works it works and when it doesn't it doesn't.
This is very frustrating. It is not like the programs don't work because I've got them all to work but only sporadically. Is Alltel doing "something" to this phone and the GPS like "half assed" locking it out??? I don't know what else it could be. Could I have got two bad phones in a row? I've read were other Alltel users just download Google Maps and, bingo, works immediately for them.
Any ideas as to what I might be able to try would be greatly appreciated. I love some of the features on the phone but some of the basic items that should work (speakerphone, GPS) on an expensive phone like this don't work worth a darn
Thanks!!!
Drop the Alltel Nav plan...you don't need it. All it did was set your GPS settings to work, which you can do in the settings. Set GPS Hardware Port GPS and GPS Program Port both to none. Set Baud at 4800 and allow automatic managment. Soft Reset just in case and you should be good to go!
-Space
mspace00 said:
Drop the Alltel Nav plan...you don't need it. All it did was set your GPS settings to work, which you can do in the settings. Set GPS Hardware Port GPS and GPS Program Port both to none. Set Baud at 4800 and allow automatic managment. Soft Reset just in case and you should be good to go!
-Space
Click to expand...
Click to collapse
I only had the Alltel Nav plan for a couple of days... only got it for troubleshooting.
I had tried your settings before and both Google Maps and GPS Test could not even find the GPS. I just tried again and same results... GPS just keeps scanning for the GPS and can never find it. You have an Alltel phone?
The setting that you recommend me changing away from the default setting is the GPS Program Port... if that is set to NONE, the programs can't even find the GPS. When I change it back to COM4, the GPS is found but GPS Test sits at "GPS Starting Up" with either no satellites found or just one most of the time. I did the other day get it to work even on this new phone but then yesterday tried again for 20 minutes sitting still outside and the best I got GPS Test to show was 4 satellites... not even enough to get past the "starting up" message.
It seems like it is defective again but, man, TWO phones in a row with a bad GPS?????
So last night after replying to this thread, I was messing around with the new google maps. This morning...NOTHING works with my GPS. Perhaps the download of alltel nav (although canceled) activated the GPS on my phone for a specified time and now the sub ended. I was sold on this phone by Alltel reps because the GPS was not locked to an app.
-Space
mspace00 said:
So last night after replying to this thread, I was messing around with the new google maps. This morning...NOTHING works with my GPS. Perhaps the download of alltel nav (although canceled) activated the GPS on my phone for a specified time and now the sub ended. I was sold on this phone by Alltel reps because the GPS was not locked to an app.
-Space
Click to expand...
Click to collapse
Well, after screwing around yesterday like I did, I decided to just let it set in my garage (with many sky lights) this morning for a few hours with the GPS Test program running and looking for satellites. NOTHING. Did a soft reset, went outside, started up the GPS Test program and within 5 seconds was locked on to 10 satellites!?!?! I could swear I've done soft resets before and it did no good. Will try a soft reset again if it quits working on me. Also, I'm inside the house now in a room with ZERO windows and it is still seeing 7 satellites. I suspect there is an issue with GPS on this phone but because it seems very "flaky" I'd think a software update may be able to fix it... hope so anyway!
You might want to try a soft reset and see if that works for ya?
I also talked to a smart phone expert guy and he said it doesn't hurt to do the Quick GPS DAILY. He has found that on many phones running a program like this daily helps the phone to connect much quicker. FWIW, I didn't run it today and after the reset it connected in seconds. LOL
Ok, so I tried running Quick GPS and I get an error "Connection Failed". Perhaps this is somehow related to the GPS issue? I will keep trying throughout the day.
-Space
mspace00 said:
Ok, so I tried running Quick GPS and I get an error "Connection Failed". Perhaps this is somehow related to the GPS issue? I will keep trying throughout the day.
-Space
Click to expand...
Click to collapse
I only ever got that when my 911 location setting was turned OFF when I first got the phone. Turned that on and it worked no problem. Also, of course, you have to be able to get your data connection established. With a data connection and your location settings ON, I don't know why you'd have a problem.
GPS no worky right for me......
Finally someone with a thread for this issue! I too am having the exact same problem. The GPS is very "flaky" at best.... I have had it work sporadically at best in the car and will drop it for no reason and the pick it right back up and then go out for good. I dont really understand what to do, it is all quite a mystery. I have manipulated the settings back and forth trying diffent things to no avail. I hope there is an update soon that straightens this out. It annoys me becasue my old titan got signal in about 10 seconds, 10 satellites, indoors, in any part of my house.... just a bit frustrating. Hopefully we get a fix soon.
Thanks for any advice on this!
Gary
bfranker said:
I only ever got that when my 911 location setting was turned OFF when I first got the phone. Turned that on and it worked no problem. Also, of course, you have to be able to get your data connection established. With a data connection and your location settings ON, I don't know why you'd have a problem.
Click to expand...
Click to collapse
THANK YOU!!!!!!!!
This was driving me nuts! Now not only does quickGPS work, so does google maps I remember now changing that setting last night. Who knew?
-Space
After messing with this a bit more, I think there is definitely an issue with the Alltel version of this phone and the GPS. It seems that if I can't get it to work, it WILL work after I do a soft reset. What triggers the "need" to do a soft reset I have not yet figured out. But, I do know that I saw a friend who just got a Sprint HTC Touch Pro and had no idea about the GPS. I downloaded Google Maps on their phone and in less than 5 seconds the GPS was working like a charm.
Looks like the Alltel GPS works but is very sporadic at best and, for whatever reason, requires a soft reset damn near each time you want to use it. Hoping for a real "fix" for this soon!
and how do i change the 911 location settings
The 911 settings are located in the settings for the phone. START->SETTINGS->PHONE then click the Services tab and it is under the Location Setting.
-Space
Ok here is something that may be contributing to my problem. So i have double and triple checked the my location check and looked at the option which has always read "on". the strange thin is that the icon on the phone dialer screen shows my location feature is set to off. I have gone back to check the location setting and verified it was on. So i selected off then back on and then the icon reflected it was "on". I have tried soft resets after doing this and it goes right back to the way it was before I force it on. I am now hinking this is what is contributing to the flaky response of the gps. just wondering if anyone else has had this problem.....
gary
garyr2548 said:
Ok here is something that may be contributing to my problem. So i have double and triple checked the my location check and looked at the option which has always read "on". the strange thin is that the icon on the phone dialer screen shows my location feature is set to off. I have gone back to check the location setting and verified it was on. So i selected off then back on and then the icon reflected it was "on". I have tried soft resets after doing this and it goes right back to the way it was before I force it on. I am now hinking this is what is contributing to the flaky response of the gps. just wondering if anyone else has had this problem.....
gary
Click to expand...
Click to collapse
Which icon are you talking about? I looked through the online pdf manual and could find no icon that indicated this setting was on or off
Also, while a soft reset sometimes works for this, it doesn't all the time. What has saved me time in this, though, is that I've learned that if it doesn't connect in under a minute, it ain't going to. Mine either works pretty much right away or doesn't work at all. It does seem to help to start up GPS Test first but that doesn't always work either.
After reading a bit more about this on other forums, it doesn't look to be related specifically to the Alltel version like I originally assumed. A number of people with other carriers are also experiencing "flaky" operation of the HTC Touch Pro GPS. The very sad part about this is that, apparently, HTC refuses to acknowledge a problem exists.
Would be nice to know if this is a software/driver issue or hardware issue. If a hardware issue then I'll be stuck using an external receiver most likely. Software, I can hold out hope that somebody will get it figured out!
the icon i am referring to is on you phone dialer. it is a circle that resembles a set of crosshairs. when the location feature is on, you will see the crosshairs. when the setting is off the crosshairs have a diagonal line through them. i am using my phone to send this so i cant attach any pictures right now. the icon is right next to the back arrow at the top of the dialer where the number you dial is shown.
update... spent 30 minutes with alltel smartphone support and they had no solution other than saying they would send this to the group that reports issues to htc to work on a solution. they did offer me to return it but i like this phone too much. i am
sure we will figure it out soon enough.
garyr2548 said:
the icon i am referring to is on you phone dialer. it is a circle that resembles a set of crosshairs. when the location feature is on, you will see the crosshairs. when the setting is off the crosshairs have a diagonal line through them. i am using my phone to send this so i cant attach any pictures right now. the icon is right next to the back arrow at the top of the dialer where the number you dial is shown.
update... spent 30 minutes with alltel smartphone support and they had no solution other than saying they would send this to the group that reports issues to htc to work on a solution. they did offer me to return it but i like this phone too much. i am
sure we will figure it out soon enough.
Click to expand...
Click to collapse
Ahh... I see that now and amazingly enough, mine has a line through it. I'll check that next time I can get the GPS to work and see if it changes.
Like you, I really like the phone but it greatly aggravates me that something so expensive doesn't work, as designed, out of the box.
I have had 3 alltel TP phones and all of them once 911 and location was set to on and quick gps was run once then they always got instant locks of 10 satellites. On my mogul the best i would ever get would be 4-6 satellites. Google & Live search use the intermediate driver with default settings with no lag and Iguidance (which is the best voiceprompt gps software) works with no lag when using Franson GPS gate as a virtual com port for the GPS driver.
bruceo said:
I have had 3 alltel TP phones and all of them once 911 and location was set to on and quick gps was run once then they always got instant locks of 10 satellites. On my mogul the best i would ever get would be 4-6 satellites. Google & Live search use the intermediate driver with default settings with no lag and Iguidance (which is the best voiceprompt gps software) works with no lag when using Franson GPS gate as a virtual com port for the GPS driver.
Click to expand...
Click to collapse
If you go to your phone dialer, is there a "line" through the crosshair/circle icon?
I haven't been able to get a lock for couple days now. Bummer. I'm going to call Alltel tech support again and see what they say.
Ok, after not even beeing able to get more than a couple satellites being shown in GPS Test which means nothing more than a GPS Starting message, I decided to call tech support to see if they had documented any other issues with the phone since I last contacted them. I was told there are NO known issues with the Touch Pro (not even the problem with the speakerphone or the previously reported GPS issues).
After talking with tech support and they guy telling me that they get a number of calls for "other" GPS software programs but not too many for the Alltel Navagation program that they offer, he told me he can't help me with the other programs and I should contact their vendors. I tried to explain to him that one was a simple GPS Test program and the other was Google Maps but he kept saying that they don't really have problems with "their" GPS subscription program.
Being basically fed up and figuring it was worth the $10 to continue to troubleshoot this problem, I downloaded the Alltel Navagation program again. And guess what... IT WORKED. Guess what else... when I had the Alltel Navagation program working, GPS Test and Google Maps work fine too and I'm even inside a large building right now!!!
Does anybody have any "inside" on what is going on here? I know a number of Alltel people say the GPS on their Touch Pro works just fine using something like Google Maps. On mine, it "sometimes" works. I find it VERY odd that on my last Touch Pro phone I NEVER got even a single satellite to show until I downloaded the Alltel pay program. Now, with this phone, after struggling with it a bit I can "sometimes" get it to work but haven't been able to for a couple days, even after numerous soft resets but now, immediately after activating and running the Alltel program, my GPS starting working just peachy and even inside a large building!?!? I've got a full 5 bars in the Alltel GPS program inside. WHAT GIVES???
I'm going to pay for this Alltel program for a few days and see if I can consistently get a lock. If so, I'd sure like to know why the phone's GPS magically gets "better" so long as you pay for their service
bfranker said:
If you go to your phone dialer, is there a "line" through the crosshair/circle icon?
I haven't been able to get a lock for couple days now. Bummer. I'm going to call Alltel tech support again and see what they say.
Click to expand...
Click to collapse
I am using the regular windows dialer and yes there is a line through the circle/crosshair.
I just went outside and launched Gpsgate/Iguidance and had 10 sattelites instantly, it has been at least a week since I have drove and used the GPS, but I use it all the time with no problems or lag. Inside I almost instantly get 6-7 sats. using Google maps or livesearch without GPS gate, only the MS intermediate driver I get instant locks as well. I ran quick GPS once about a month ago on this unit.

[ROM][VZW][12.21.08]VZ Nav ROM 2.0-llllboredllll GPS Edition -(WM6.1 CE OS 5.2.20931)

VZNav Rom 2.0 for Verizon XV6850 - llllBoredllll GPS Edition
Update 23 Dec 08 See Post #2
Preface:
This ROM is based on the eRice kitchen like my last couple ROM's. It has a modified version of the llllBoredllll GPS Fix. I modified it to create a link to PPST.exe in Programs -> Navigation -> Installation. In that folder you will also find three other installers for the latest version of Google Maps (with the new feature set)and Live Search. All tested and working with GPS locks usually under 60 seconds.
Details:
OS / Kitchen:
eRice TP Kitchen v1.03.7 [SYS OS 5.2.20931 Build 20931.1.5.0] with my Verizon OEM Pack
- Removed -
JetCet Printing
Older Opera 9.5 from Stock VZW ROM
NETCF 2.0
+ Added +
*NETCF 3.5 - Faster than 2.0 and now the standard from the eRice Kitchen
*Apps
Opera 9.5 build 2649 (Has zoom slider!)
iContact Burt Edition 6.4.5 (finger friendly contact chooser, iphone-ish)
HTC YouTube From kitchen
Latest Google Maps and Live Search. They are fully upgradeable to new version with out any issue!
*Utilties
TF3D Config - Modify TF3D settings and themes
Diamond Tweak - Modify many system settings
Advanced Config 3.3 - Modify even more system settings
nueFonts - Change fonts and sizes. Trebuchet and Calibiri look great!
SPB Back up - Great back up app. 5 free uses.
A black themed psShutXP - Utility to soft reset
HTC Network Plug in from Kitchen
*Sensor
Gyrator - Utility to rotate screen automatically in any app
Diamond Hologram - Cool 3D sensor app that simulates a hologram
Seismo - Nifty program to simulate a seismograph using motion sensor
*Tweaks
Minor system tweaks for performance and usability
US Weather Database
Modified Verizon TF3D Theme with Internet, music, and photo tabs gone. Can be added back in using TF3D Config
Custom TF3D Icons
TF3D Flip Clock on VZW theme
Contacts mapped to left softkey on Home screen.
Internet Sharing
*GPS Fix
Bored GPS is incorporated for the easiest of use
Instructions:
** YOU MUST BE UNLOCKED BEFORE BEGINING! SEE STICKES FOR UNLOCK DETAILS FIRST! WE WILL NOT SUPPORT UNLOCKING IN THIS THREAD JUST FLASHING.
Flash ROM from RUU folder using ROM Update utility. Sync with Active Sync before starting upgrade utility. This ROM flashes just like any other Custom ROM.After flash is complete phone will boot up and AutoRun will start setting up. Do not try to stop this! Phone will reboot on its own when completed.
When Phone boots back up wait for the system to finish loading then...
1. Start Dialer by clicking Green Phone button
2. Dial *22899 and let the programming start. Phone will reboot when completed
3. Click Start -> Programs -> Navigation -> GPS Prep. Install it to the device and not storage card. When install is complete click OK. You should be back in the programs menu under Navigation.
4. Now you see an Installation folder as well as GPS Prep. GO into install folder and run "Run PPST". Select OK to proceed with update. When that is finished select OK when prompted to reboot.
5. Now we need to enable GPS in windows and verify the PRI update worked. Start phone by pressing green button. Service should now say Sprint instead of VZW. You will need to make a call to do this. Dial your voice mail. It should ring in to it no problem and the carrier should now say sprint on the screen instead of VZW. If it does then proceed to next step. If not go to step 1 and start over.
Now click Menu -> Options -> Serivces Tab -> Location Settings -> Get Settings -> Location On -> OK ->ok
6. DONE!
At this point you are done and GPS is unlocked. You can start installing the included GPS apps if yiou choose.
**The included apps have been modified to put the shortcuts in the Navigation Folder under programs. They are the latest versions respectively as of 20 Dec 2008 11:49PM Central Time. They can be uninstalled later to accommodate updated software! Don’t ask in the thread because you will look really silly as I have answered the question here.
Installing Live search and Google Maps then making them compatible, Step by Step!
How to set up Live Search
Install application from \Navigation\Installation\
After installing the application will launch.
Select Menu -> Settings. Arrows Done to GPS COM0 and change it to GPS COM4. Select Done
Now select Map. This brings up the default map. Next turn on GPS by pressing Menu -> Center on GPS.
It can take a few minute for a first fix. After that it much quicker. I also recommend toggle Center GPS on and back off again if it doesn’t pick up in under 90 seconds as a matter of fact the program will force you to. If it forces you to then click Ok then toggle “Center on GPS” off then back on and it will lock quickly! First lock is always hard on fresh flash. After that you should be good to go.
How to set up Google Maps
Install application from \Navigation\Installation\
After installation Google Maps will load for the first time.
Select Menu -> Options -> GPS Settings
Select Set manually and then arrow down and select COM4 then change baud rate to 4800. Now click ok.
Now Select Menu -> Use GPS and you will then lock on!
TomTom7
Install as normal and let it configure the GPS automatically as normal when starting up for the first time.
Done!
Remember: Be patient! It may take a couple soft reset to get it to work but it will. Trust me. Worse case scenario I had with a flash was I had to try twice in Live search then exit live search, toggle location off and back on, restart Live Seach and it locked instantly. Most of the time it will lock on the second try. Its been about 90% consistent under 60 seconds for me. A brand new phone took only two tries with live search and it got it within 15 seconds on the second try.
Note 1: This was done on a brand new in Box XV6850 straight from the VZW store and worked as stated above. These were also conducted using the stock Radio. This was done in the office basement of my house completely below ground. These are results are repeatable as I have don’t them at least 8 times now on two different phones.
Note 2: I have not applied anyother fix to my phone other than the steps listed above. I have not applied the aGPS fix either.
If you want to change the banner than follow the thread for the GPS fix by bored. There are instructions in there on how to fix the banner from Sprint to Verizon.
Downloads: www.scottcrosler.com
Reserved
Update 23 Dec 08
I have uploaded the kitchen. The direct link is below until I update the html. Please ask any questions you have in this thread and I will try to help as much as possible. eRice would not be asisting as I made pretty major changes he would not be able to support.
Just replace the eRice OEM fiolder wiht hte one in the download. Use the kitchen per his post.
http://www.scottcrosler.com/TouchPro/OEM.rar
Ok some users having issue getting the golden first lock try this:
Its cheating but it works. Call VZW and add VZ Navigator to your account. Its free for 30 days. Download and install it. Use the My Location to get a fix. Exit VZ Nav. Start live search, google, tom tom whatever and it will lock right away because the GPS is primed. Once you get that first lock you are godo to go!!! Call VZW at end of 30 days and cancel.
It does take patients. I had it not work right away on about 3 of 15 times trying it since it was out. It will work but requires patients. When paitents runs out try the above.
You can also try the aGPS fix aswell as using the GC provisioning cab. Some users said tha tmakes teh differnece for them.
My best advice: Soft reset and toggle GPS off and then on in phone options. Styart live search and try again. It may take a couyple times but it does work ;c)
About to give this a try, you and bored are f*ckin great!
Ill be back with confirmation and appropriate thanks if all works out!
*sigh* i just have to charge up to 50% battery first lol
Nat2fresg said:
About to give this a try, you and bored are f*ckin great!
Ill be back with confirmation and appropriate thanks if all works out!
*sigh* i just have to charge up to 50% battery first lol
Click to expand...
Click to collapse
Hahahah, I will have tell you how to get around that one day. You think my battery ever makes it OVER 50% hahahaha.....
How to get around: Put phone in bootloader mode. Active sync doesnt check battery status. I flash on 5 to 10% battery most of the time. hahaha... I dont recomend this to anyone other than myself.
Dont try this with the hard PSL though!!!!!!
Thanx Scott, will try this out in a bit. Flashing this stuff is an addiction now...
gh0stb0y said:
Thanx Scott, will try this out in a bit. Flashing this stuff is an addiction now...
Click to expand...
Click to collapse
Good, glad to see my addiction is spreading and no longer contained to just me! Hahahaha...
Let me know what you think.
Just an FYI: You do not have to apply the GPS fix if you choose not too. The ROM can be used as is.
I've been waiting until there was a GPS fix before flashing a custom ROM; did this one this morning and works like a charm. I haven't customized anything yet; just installed the ROM, my Exchange settings, the GPS fix and Windows Live, and it works like a charm so far.
I'll be able to answer this myself shortly; but did you put Voice Command back in?
Thanks so much for all your work.
I have flashed to this ROM and I am not able to get the GPS to work at all.
I am going to reflash the ROM and try again and report back on any progress.
I hope this works for me.
Thanks for your work and Bored as well.
You guys are the reason I went to HTC over Samsung.
You guys ROCK!
Tom Tom Navigator
You mention using the gps with TomTom Navigator 7. Do you know if it would be the same in TT Nav 6 which is what I have? Is there a TTNav7 for US or a way to use it on US maps?
Can someone point me towards more information on the GPS fix? this truly unlocks Verizons GPS for use of any GPS app?
EDIT: oops. Found the info I needed.
Thank to you Scosler, I have been really enjoying my touch pro.
So I reflash the ROM and I am still not able to connect as smoothly as others have been able to.
I followed all directions and still no GPS! UGHHH
Scott, I checked the Device Info for my PRO and saw the following info:
ROM Version = 1.00.0.0
ROM Date = 09/12/08
Radio Version = 1.03.03V
Protocol Version = 7500J-SDCBBPZM-6150
Hardware Versio = 0002
PRL Version = 51143
PRI Version = 1.53_003
Browser Version = MSIE 6.0
ERI Version = 4
Is this what it is supposed to be?
If not, What did I screw up?
RonMac said:
So I reflash the ROM and I am still not able to connect as smoothly as others have been able to.
I followed all directions and still no GPS! UGHHH
Scott, I checked the Device Info for my PRO and saw the following info:
ROM Version = 1.00.0.0
ROM Date = 09/12/08
Radio Version = 1.03.03V
Protocol Version = 7500J-SDCBBPZM-6150
Hardware Versio = 0002
PRL Version = 51143
PRI Version = 1.53_003
Browser Version = MSIE 6.0
ERI Version = 4
Is this what it is supposed to be?
If not, What did I screw up?
Click to expand...
Click to collapse
Nope thats what its supposed to be. Just be patient. Make sure location is turned on, try to get a good a spot where you can see the sky.
I just compared mine to a sprint phone with aGPS and mine actually locked about 15 seconds faster. It took my 7 seconds to lock. Took him 23 seconds.
Try toggling location on and off. Do it while you are trying to connect with live search. It may seem to freeze the phone. If it does it means GPS is working because it wont let you toggle. If thats the case then go back into live search and toggle GPS off again. Then toggle the location setting off and back on. Thats what it took for me one time.
Its touchy the first time but not like that the second and subsequent times.
Be patient, it does work. I couldnt get it to work the very very first time. I had to play with Location Settings off then on a couple times and soft reset a couple times and I was GOLDEN. Most of the flashes I have done already just require the toggle off then on trick.
Be patient, it works. You will get it. Leave your phone by a window if you ahve to and come back in 5 minutes. I think watching the display makes it lock slower ;c)
straylight said:
Can someone point me towards more information on the GPS fix? this truly unlocks Verizons GPS for use of any GPS app?
Click to expand...
Click to collapse
Did you even read the first post? The fix is in the ROM. Just follow instructions.
If you want the fix without the ROM its over at PPC Geeks.
http://forum.ppcgeeks.com/showthread.php?t=49933. THis can be applied to some existing Custom ROM's, any and all versions of my custom ROM, and the stock ROM. Not all custom ROM's have been reported to work. I see three posts for the NexVision ROM stating it doesnt work. I cant say one way or the other. I only use my own ROM's.
This new ROM works like a champ! I followed the instructions exactly and it worked first time without any issues. Great work!
Mike
mmcgough said:
This new ROM works like a champ! I followed the instructions exactly and it worked first time without any issues. Great work!
Mike
Click to expand...
Click to collapse
WOOOOOOOOOOOOOOOOOT! Glad to here man. Like AQTHF Carl would say "Its freakin Awesome!"
And voice command is there, which is huge. Thanks!
tmwes said:
And voice command is there, which is huge. Thanks!
Click to expand...
Click to collapse
Hey guys, glad you liked it! Good stuff or what?
I found TomTom 7.45 locks THE FASTES out of all GPS apps. I locked with TomTom and Live search was in the background still trying to lock.
I also compared my phone against a Sprint Cooked ROM on a Sprint device and my **** locked 3x faster than the sprint device.
Here was the conditions:
Temp -15 F
Time 10:00am
Location downtown Fargo ND
My ROM on my XV6850
Sprint Cooked ROM from PPC Kitchen on Sprint device (Co-Worker)
Both OS were 20931 builds.
We both walked down the stairs form our "vault" of an office. We both flicked on TomTom and stood side by side. Mine locked in 7 seconds, his locked in about 23 seconds. A full 15 seconds difference. **** Sprint and all the **** that was talked. I consisitenantly get faster locks than a sprint device.
FTW!!! MY ROM KICKS ASS. FTW!!!! llllboredllll forever!
Having issue with GPS. When i try to enable location to ON, it just hangs, I get the busy icon and it doesnt do anything. I can push OK and it dissappears but gps doesnt work in any program. I tried rerunning all the gps tools but nothing works. When i restart the phone in settings it shows location ON, but it still doesnt work. When i try to turn it off, it hangs again.
Scott,
I haven't installed this new ROM yet but I wanted to point out a problem I've been having with the last ROM. When I want to download an attachment within an email in Messaging, the keyboard almost always locks up and I can't save the attachments to my TouchPro. It locks up on the screen where I select where to place the document as a 'Save as'.
Other than that, it's all worked great and I can't wait to try out the new GPS fix!
-Brian

Get aGPS to work in Google Maps??

I had the feature in other roms that would give me an approximate location on Google Maps almost instantly when it was opened. Within 2400 meters or so. With the new NFSFAN rom this is not the case. It finds GPS lock, but until then it has no idea where I am. The weather location thing works so aGPS should be working, just not working in Google Maps.
Not sure if it will work in your rom, or even be the problem. I assume you are talking about tower based location.
The rom I was using it worked then suddenly stopped after upgrading. I compared the registries and found that for some reason some keys in the registry werent being created. I added these and it started working again.
HKLM>software>google>googlemaps
supports_extended_ril value=1
(this will enable location based off of cell phone tower)
supports_extended_wifi value=1
(this will enable location based off of your wifi access point)
You will need to restart google maps for it to take effect.
hope it helps.
deepsix_69 said:
Not sure if it will work in your rom, or even be the problem. I assume you are talking about tower based location.
The rom I was using it worked then suddenly stopped after upgrading. I compared the registries and found that for some reason some keys in the registry werent being created. I added these and it started working again.
HKLM>software>google>googlemaps
supports_extended_ril value=1
(this will enable location based off of cell phone tower)
supports_extended_wifi value=1
(this will enable location based off of your wifi access point)
You will need to restart google maps for it to take effect.
hope it helps.
Click to expand...
Click to collapse
what is your distribution_channel value set to? I have it at gmm-htc trying to see if that is preventing me from connecting to the gps towers.
i don't have HKLM>software>google>googlemaps
I have: HKLM>software>google>cll>permission list>services.exe
I put those values in cll since there was nothing in the other two and it did not work.
I'm also trying to get GPS to work on NFSFAN's 1.05 ROM (either aGPS or GPS). I don't have the registry keys mentioned above either.
I'm on the latest USCC radio.
phalkon30 said:
I'm also trying to get GPS to work on NFSFAN's 1.05 ROM (either aGPS or GPS). I don't have the registry keys mentioned above either.
I'm on the latest USCC radio.
Click to expand...
Click to collapse
Do you have the right COM port and baud rate set up? If your GPS isn't working right, you may have to manually set up the hardware parameters. Try to use QuickGPS/HTC GPSTool/VisualGPS or whatever GPS tool NFS cooked in his rom and see if it can connect and get a few locks.
Seannoxious said:
what is your distribution_channel value set to? I have it at gmm-htc trying to see if that is preventing me from connecting to the gps towers.
Click to expand...
Click to collapse
??? is that a key also for google maps, I dont have one like that. I just have the two mentioned keys (after I added them) along with one other key.
Have you tried adding the above keys and see if it helps?
Keep in mind, I am not currently using the same rom as you, its just a problem I noticed with my rom and the keys fixed it.
egzthunder1 said:
Do you have the right COM port and baud rate set up? If your GPS isn't working right, you may have to manually set up the hardware parameters. Try to use QuickGPS/HTC GPSTool/VisualGPS or whatever GPS tool NFS cooked in his rom and see if it can connect and get a few locks.
Click to expand...
Click to collapse
I could be wrong, but I believe you only need to setup the com and baud rate when using an external gps or using your phone as a gps for something else (ie computer)
Good luck!
deepsix_69 said:
I could be wrong, but I believe you only need to setup the com and baud rate when using an external gps or using your phone as a gps for something else (ie computer)
Good luck!
Click to expand...
Click to collapse
Not necessarily. If the software that you are using doesn't detect the hardware right away, you have to manually set it up. I happened to my Fuze when I had it. I had iGo8 and had to input the settings by hand. Same thing with my Vogue.
waiting for this one
I have been waiting for this to be discussed. I am on NFSFAN's ROM on verizon and google maps is not working. I will try the above reg hacks and report back
Adding those two reg keys did not work for me. Deepsix who is your carrier?
Just on a note. I have the latest NFS and this feature works for me in Google maps, even though I have the phone disabled and the Data connection turned off as well. I use my Touch as a WiFi VoIP device only.
When I start I get an approximate location, and when I click on the little blue dot it gives me my locale within 100 Meters.
I also did not install any of the providor specific cabs that are in the first post on the NFSFAN thread.
It does work with wifi but not over the towers which is what is really useful. Good to know that it does at least work with wifi though.
Try the provisioning.cab file for your carrier?
At the risk of offending and stating the obvious did you guys with the GPS problems install the carrier specific provissioning .cab in order to get GPS working?
If not, try it:
the attached files on the first post of the thread titled " *Updated March 5th* NFSFAN's Custom WM6.5.5 ROMs "
I'm not allowed to post links yet.
fenixrising123 said:
Adding those two reg keys did not work for me. Deepsix who is your carrier?
Click to expand...
Click to collapse
That wont help you, its a very small regional carrier. "inland cellular" I have never been able to get google maps to work even on a stock phone from them. Adding those two reg entries was the only way I could get it to work for me.
Sorry it didnt work for you. I know how frustrating it can be.
Just to make sure everyone understands, the GPS would always for with the location, but when gps is off its supposed to get its location based off of the cell tower id/wifi router id's Thats what the reg edits did for me. You can tell what your getting your location from becuase of the accuracy. GPS said it was within a couple yard where as tower based it was within a couple miles.
Ok I took my touch pro and flashed the most recent nfsfan rom and tried google maps location. With GPS on, I could get a location, with gps off and wifi on, I could get a location, with gps off and wifi off, using only cellular data I COULDNT get a location.
I closed google maps.
went to regedit and scrolled to
hklm--software--google
for some reason there is not a key titled googlemaps, I am not sure if thats because its baked in the rom or what.
So...
I created a new string under google titled -- googlemaps
under google maps I created a new string value titled supports_extended_ril with a value of 1
I restarted google maps location and with only the cellular data enabled, it gave me a location instantly.
On a side note, there is another key under google titled cll, dont quote me, but I believe thats created for when you enable 'my location' in the sense theme so that your location shows up on the weather tab. I am not sure if you need to enable that also, I did enable it first so if you are still having troubles, try enable that also.
Hope that helps. It seems to work on any rom I have tried it on. Like I said in previous posts, even the stock rom wouldnt give me that location. I dont think it is carrier specific, as if I understand it correctly, google is sent what tower you are using via tower id code, then google compares that to their list of tower locations. Google then send back your approximate location. They also do that with wifi routers.
Let me know if it works for you.
deepsix_69 said:
Ok I took my touch pro and flashed the most recent nfsfan rom and tried google maps location. With GPS on, I could get a location, with gps off and wifi on, I could get a location, with gps off and wifi off, using only cellular data I COULDNT get a location.
I closed google maps.
went to regedit and scrolled to
hklm--software--google
for some reason there is not a key titled googlemaps, I am not sure if thats because its baked in the rom or what.
So...
I created a new string under google titled -- googlemaps
under google maps I created a new string value titled supports_extended_ril with a value of 1
I restarted google maps location and with only the cellular data enabled, it gave me a location instantly.
On a side note, there is another key under google titled cll, dont quote me, but I believe thats created for when you enable 'my location' in the sense theme so that your location shows up on the weather tab. I am not sure if you need to enable that also, I did enable it first so if you are still having troubles, try enable that also.
Hope that helps. It seems to work on any rom I have tried it on. Like I said in previous posts, even the stock rom wouldnt give me that location. I dont think it is carrier specific, as if I understand it correctly, google is sent what tower you are using via tower id code, then google compares that to their list of tower locations. Google then send back your approximate location. They also do that with wifi routers.
Let me know if it works for you.
Click to expand...
Click to collapse
Thanks for the very detailed scientific post. I have not been able to get GPS working on USCC, there is no carrier cab for it.
I didn't realize after setting the registry entry's that you had to turn off the GPS option in google maps. After turning that off it found my "approximate" location very quickly within half a mile or so of where I was (after also editing the registry).
Thanks everybody! It works well enough for me not to care
That worked for me as well. Thanks! I must have been doing it wrong before because that is a more detailed explanation of what was suggested earlier if I am not mistaken. I cannot believe google would screw something so simple up.

GPS Nav via TetherGPS on Nook Tablet

I was able to get TetherGPS running on my NT. Google maps and turn-by-turn nav are working fine.
Instructions:
1. On your NT, download TetherGPS Lite from here:
http://comptonsoft.com/test/
2. Install TetherGPS. When prompted, enable 3rd party apps and enable mock locations in the development settings menu.
If the Application Settings menu doesn't pop up, you can get back to it by downloading something I hacked together to get to the menu (tgps_launcher) from the address above. Click start in tgps_launcher and the menu will open.
3. Install Google Maps. I have an older version of the APK at the site above, or you can find a newer/better one.
4. Make sure the NT is connected to your phone's wifi hot spot, the TetherGPS server is running on your phone, and the TetherGPS client is running on your NT.
To launch any of the apps, you can click your "n" button, hit search, and start to type in their names. They will appear in, and can be launched from, the search list. (thanks to jdlothar for this tip!)
Nice and thank you! You can also install go launcher and just choose stuff straight from the app drawer.
TetherGPS "not receiving location"
I'm trying to use TetherGPS with the client on a Nook Color running CM7 stable (7.1.0), server on a Nexus S - tethered via wifi tethering.
Once both client and server are started, the client reports "not receiving location" - any ideas?
Good stuff.
If anyone can help me with this, I'm having trouble with street view. When I select it, I'm told there is no app to handle street view. Is there a separate apk just for street view?
Sent from my BNTV250 using xda premium
Is there a separate apk just for street view?
Click to expand...
Click to collapse
market.android.com/details?id=com.google.android.street
Thanks. I wasn't able to get it through the market, but I found an apk and it installed without a problem.
Sent from my BNTV250 using xda premium
Once both client and server are started, the client reports "not receiving location" - any ideas?
Click to expand...
Click to collapse
Solution: make sure the server actually has a GPS signal
The problem was I was testing this indoors, and whilst the phone (server) had a location (via cell/wifi), it did not have GPS lock. Once I'd moved to the window and waited for the necessary time to acquire GPS lock, the TetherGPS server began sending data.
Version 1.2.0 was just posted. It includes some changes to make it easier to troubleshoot problems. It's now obvious if/when the server transmits location, if the client receives it, and how old the fix is. The server also will transmit network-derived locations if a gps fix is not available or if it is too old.
There was an update to the TGPS network protocol. This version will require you to update both the client and server, otherwise the client will report a version mismatch and not function.
1.2.0
- TetherGPS now sends the best available location (network or gps), and indicates the type and age of the fix on the notification bar.
- Icons have been updated.
- Different color icons now indicate status.
+ Gray = no connection
+ Red = very stale fix or no position
+ Yellow = stale fix
+ Blue = good fix.
The tethergps apps works good on rooted nook tablet and g2x. Google maps picked up signal but get a force close when it switches from the map to navigation mode. Tried reinstalling apps with no luck. Route 66 and Navigon both seem to work fine with turn by turn navigation.
Sent from my BNTV250 using xda premium
Tested with HD2 T-Mobile running AmeriCanAndroid and rooted NT running ADW Launcher, using WiFi Tether and trial Tether GPS Lite.
For others giving this trial a test drive, as mentioned in the marketplace, you can only use it for a limited amount of time before it times out (trial version). Similarly, if you are turning it off and on while experimenting with settings to get it working, you have to wait a certain amount of time. Just be aware, and read the status messages on your phone so you know whether the system is actually working or if its just timed out/waiting for timer to start up. No big complaints about this other than some nubs like me getting a little confused setting this up to make sure it works before purchase. Also, for nubs like me, make sure you follow the directions in the first post for allowing "mock locations" on the tablet.
Otherwise, the maps, GPS location, and directions seem to work very well. Great work! Unfortunately I haven't figure out how to get the turn-by-turn navigation running.
How did you get the Navigation to work? When I click on the Nav button on the top right of Google Maps it force closes. If I click on the Nav button from the drop down menu on the upper left, it says that I need "driveabout". Did you side-load a Google Navigation Beta apk file?
GPS needs no be enabled on the NT. Use power control widget or other GPS toggle widget to turn the GPS on.
tgraves said:
GPS needs no be enabled on the NT. Use power control widget or other GPS toggle widget to turn the GPS on.
Click to expand...
Click to collapse
Is this in response to my Nav question?
Weo said:
Is this in response to my Nav question?
Click to expand...
Click to collapse
Yes, On the NT, install a widget that allows you to turn on your GPS (even though the NT doesn't have have one) I use Power Control widget (1 widget controls WiFi, Bluetooth, GPS and screen brightness). Just have the GPS enabled with that widget, and you should be good to go. It worked for me to allow turn by turn.
tgraves said:
Yes, On the NT, install a widget that allows you to turn on your GPS (even though the NT doesn't have have one) I use Power Control widget (1 widget controls WiFi, Bluetooth, GPS and screen brightness). Just have the GPS enabled with that widget, and you should be good to go. It worked for me to allow turn by turn.
Click to expand...
Click to collapse
I'm familiar with the power control widget. Thanks! I'll give it a try.
I'm getting a "enable a My Location source in system settings" error.. don't know where that is on the Nook. Normally it's under Location & Security but on course on the Nook there is only a couple of options under security. Seems like everybody would be getting this message but nobody has posted anything about it and nothing is mentioned about this in the installation instructions.
Don't forget to activate "mock locations" in development settings.
Sent from my B&N Nook Tablet using XDA Premium App
I did that (both check boxes).. don't see anywhere else where I can "Enable a My location source" in system settings.. (is Mock location supposed to suppress this error message?)
How do you delete a post?
dursty said:
How do you delete a post?
Click to expand...
Click to collapse
Just correct it under the original text. Remember the solutions you find, (no matter how simple) will help others some day.
LOL, no solution yet, I just double posted by accident and wanted to delete the duplicate. I'll work on it some more tonight but haven't found a solution yet. Be nice to have the GPS data fed to the tablet though.

Categories

Resources