Related
I installed somet languanges support pack into it from PC, everything went fine, the PC screen said, install sucessful,, and the machine prompted to reset, and then,,,its dead!!!
The Lobster only now shows the virgin mobile logo,,cant even switch off...
What should do............???
Thanks a million!!!!!!!!!
Lobster is dead? it should be cooked!
Is the Lobster/monet ROM floating around somewhere ?
dead lobby
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
You have to flash it using it's original rom (for locked device).
but if you phone is CID UNLOCKED you can flash it using ROMIUPDATE. just put the phone in bootloader mode and run the RUU Update.
sk8erfrankrox said:
I installed somet languanges support pack into it from PC, everything went fine, the PC screen said, install sucessful,, and the machine prompted to reset, and then,,,its dead!!!
The Lobster only now shows the virgin mobile logo,,cant even switch off...
What should do............???
Thanks a million!!!!!!!!!
Click to expand...
Click to collapse
ok take batty out put it back in press to menu bottons keep hold and press power botton when a sreen tells you to press 0 do so it will hard reset you lobster
dvaiyo said:
You have to flash it using it's original rom (for locked device).
but if you phone is CID UNLOCKED you can flash it using ROMIUPDATE. just put the phone in bootloader mode and run the RUU Update.
Click to expand...
Click to collapse
hi~dvaiyo,
I have find the RUU update for lobster700 long time.
can you show url to download it ?
thanks ~
There is no place to downloat it. You must import it from other device... mtty can do it..
ive got a back up what i got form Scoter Kitchen if you what it let me no these three files BDTL0_SCOTERMSFLSH50.bin BDK0_SCOTERUT.bin BDK1_SCOTERMSIPL.bin
dvaiyo said:
There is no place to downloat it. You must import it from other device... mtty can do it..
Click to expand...
Click to collapse
I think thats you right, then the question is when I want to write into with MTTY, with which soft do I draw ROM? Please share successful experience, thanks ~
MttY?its so easy?ehe
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
utak3r said:
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
Click to expand...
Click to collapse
you have to pay £20 to cid unlock his lobby go here http://www.imei-check.co.uk/lobsterunlock.php
tankoki said:
I think thats you right, then the question is when I want to write into with MTTY, with which soft do I draw ROM? Please share successful experience, thanks ~
Click to expand...
Click to collapse
Try this :
http://forum.xda-developers.com/showthread.php?p=2100727#post2100727
travis said:
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
Click to expand...
Click to collapse
I just somewhat bricked my Lobster today after installing fonts and ce-star into my device. I was so scared I nearly crapped my pants.
I stumbled upon your detailed instructions and it saved my thing, thank you so much =]
utak3r said:
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
Click to expand...
Click to collapse
I've found this link...
ftp://koxoguest:[email protected]/sp/rom/Lobster_700_tv_os.rar
Its supposed to be the ROM for the lobster. I however cant get it to work as my lobster is stuck on a white screen during boot and cannot get into Activesync. Can anyone advise How i can get into Bootloader mode? I have tried holding Camera key but to no avail...
try taking out the battery, then heating the back of the phone for a while
I did that on my brother's phone(his Lobster "died" the same way) on a sunny day leaving it to heat up for about 30 minutes of sunshine
after that put the battery in and try booting again
OMG......
you can say it clearly
are you update the rom?
if so ,may be the word storage is broken
travis said:
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
Click to expand...
Click to collapse
For me it's not working.....
Any Idas?
hi
i am facing one big problem ,
my htc p3400i gets an error message "Device start up failed due to sudden loss of power. Please click "Yes" to continue"...this is because of after the upgrade of lomloms GENE_wm6.1_19971wwe fusion9.0 but at first it was working superb...if anyone can solve this....... so plz help me?
reflash rom
i have tried 3-4 times to reflash the rom but there is the same message,,
any other way ?
what screen number showing ?
can u try different rom
in rom flash successfully ?
yes plz explain the meg u getting on screen now exactly
i get this following message
""ERROR
Device start up failed due
to sudden loss of power.
please click "yes" to continue.
NOTE:
do not remove battery
before device nas been
completely shutdown (OFF).
yes or no""
after this when i click yes button it reboots and then phone memory gets formatted,then after using fresh flashing the rom
the same thing happens everytime
plz if any can help me will be very thankful !!!!!
After tapping Yes, do not flash again, let it complete and if possible keep the device on AC power, that will hopefully help
answer this
is ur flash get complete or u get recovery option ?
which updating utility u r using to update ??
if u r using rom update utility can u see gene phone pics on it ?
try to go bootloader
to go bootloader do this
remove battery insert it again now keep hold camera button now press power button u will see tri colur screen and tell me what number u will getting on screen
ankit360 said:
answer this
is ur flash get complete or u get recovery option ?
which updating utility u r using to update ??
if I r using rom update utility can u see gene phone pics on it ?
try to go bootloader
to go bootloader do this
remove battery insert it again now keep hold camera button now press power button u will see tri colur screen and tell me what number I will getting on screen
Click to expand...
Click to collapse
Yes, that will help. But if your device doesn't boot up (my device didn't), then while pressing the keys ankit said, softreset the device,
If its happening again and again and if its your self cooked rom, there can something wrong with the OEMDrivers folder. It should not be changed, atleast the original contents.
tell modarator to close this thread original author is not responding since long time
ankit360 said:
tell modarator to close this thread original author is not responding since long time
Click to expand...
Click to collapse
sir i'm using htc touch viva t2223
i was doing a clear storage on my device and suddenly it falls and battery is removed
now it is displaying an error :
Device startup faile due to sudden loss of power
pls click yes to continue
i have pressed yes but it is not displaying anything
SO PLEASE HELP ME FROM RECOVERING THIS.
I'M A NEW USER TO WINDOWS PLATFORM AND DOESN'T KNOW HOW TO OPERATE
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
SSPL? Aren't you supposed to use the HSPL?
jamesmbaldwin said:
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
Click to expand...
Click to collapse
As far as I know the "void" thing below the battery is correctly in place. If it was missing - then your warranty would be void.
I would put your phone into bootloader and flash a stock rom.
If you have a european phone check this http://forum.xda-developers.com/showthread.php?t=609477
If you have USA phone check here http://forum.xda-developers.com/showthread.php?t=653614
Your phone is not bricked, you should be able to reflash back to a stock rom. To flash a custom rom you should use Hard-SPL, if you do this make sure you pay close attention to the directions, because a long time ago I bricked my wizard because I didn't pay attention to details
http://forum.xda-developers.com/showthread.php?t=606713
And if you have T-Mobile USA 1024 version:
http://forum.xda-developers.com/showthread.php?p=6004691
Fixed my Aussie T9193
Hi, thanks all for the responses, I've gotten it working! I didn't know about getting the phone into bootloader mode FIRST, then doing the installations. BIG help, thanks to the collective wisdom!!
JMB
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
post in the ozrom thread then
lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
did you check your radio and did you use hspl ?
djchubbs said:
post in the ozrom thread then
Click to expand...
Click to collapse
Wrong radio!
I bricked my phone after using "Task 29"... PLEASE HELP!
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
starr073199 said:
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
Click to expand...
Click to collapse
Just hold the volume down button and then press the end call button instead of both the volume buttons...
garavd said:
just hold the volume down button and then press the end call button instead of both the volume buttons...
Click to expand...
Click to collapse
omg!!! I love you!!!!! Thanks sooooo much!!!!
possibly bricked hd2? any help!!??
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
articulatekevin said:
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
Click to expand...
Click to collapse
try turning on holding volume down push power and then plug to pc wait for usb to appear on phone screen and do task29 and than reflash your favorite rom again..... good luck!!!!!!!
i cant boot my hd2 pass the white screen with the green HTC letters, i tried hard reset but that doesnt work.
thx for your help
more info, last thing you did, what you were trying to do.
i just did that vol up + down and end call thing. im a complete noob when it comes to phones.
i didnt do anything to my hd2 (no custom rom)
it was working fine until when i tried to turn it on
i dunno if this is relevant but when i charge it the orange light is always on (at the top) even if im not charging
iethanx3 said:
i dunno if this is relevant but when i charge it the orange light is always on (at the top) even if im not charging
Click to expand...
Click to collapse
everything is relevant, and yes, that would point to a battery / charge circuit fault.
Bent battery connectors? (look carefully at all 6)
they look fine ill try to upload a video thx
heres a video hope it helps
youtubelink/watch?v=jK-T_NqNChc
im not allowed to post urls
You do need to hard reset, and (no disrespect) I suspect you're doing it wrong. Turn off the phone completely, then hold down both volume buttons and just press the power button briefly (don't hold the power button, but continue holding both volume buttons).
You'll then be given on-screen instructions that I can't remember as it's been so long since I've done it.
thx for your reply but it still doesnt work it says restore complete... vol up to reboot or something. After i reboot it. im still stuck on white screen and green HTC words
If it doesn't even boot after a hard reset then I think it needs replacing mate. It sounds irreparably damaged.
Is it new? Have you had it for a while and this just started happening? If so, what was the last thing you installed or flashed?
iethanx3 said:
heres a video hope it helps
youtubelink/watch?v=jK-T_NqNChc
im not allowed to post urls
Click to expand...
Click to collapse
did you flash a custom rom? and if yes, did you flash a matching radio? cos if you dont flash the right radio, and the cooked rom is based on a tmous core, (unlocks the 576 ram) the phone wont boot.
enter bootloader, flash a radio with 50 in the version, and it will boot.
i only had it for 6 months
how do u install then radio thingy ill give it a shot plz link me
i think it is a custom rom because my HD2 is taiwanese and i got some person to change it to english for me (custom rom?)
When i go on boot loader it comes up with
PB81100 HX-BC
SPL-1.4.2. HSPL XE
0x05
cotullaHSPL 0x40
i dunno if i got a custom rom installed.. i think it is because i bought it overseas (taiwan) and i got someone to install a english rom on it
and how do u install a radio rom because my i cant seem to get windows mobile device center to work. i found
Leo_RADIO_15.28.50.07U_2.05.50.11 **(from TMOUS 2.01) on xda forums will it do?
thanx
flash from bootloader, no need for windows mobile to be running.
that radio is a test radio, and isn't a high enough version for what you need(if the radio is indeed the problem)
look in the radio thread and go for somethin like 2.10.50.x
thx for your reply... but unfortunately i dunno how to do that bootloader thingy i think im just gonna send it back to taiwan and get someone to fix it for me. because i tried in sydney it cost 200 dollars just for them to check wats wrong
iethanx3 said:
thx for your reply... but unfortunately i dunno how to do that bootloader thingy
Click to expand...
Click to collapse
yea its pretty difficult,
phone off
press hold and keep holding voldown
tap and release power
when bootloader appears, connect usb
wait 20 seconds
run your flash on the pc
i can see how you would struggle with such a difficult process
haha problem is it doesnt recongise my device
hey you have to change you spl from 1.42 to 2.08 using hspl4 or hspl2.then only you can flash custom rom or roll back to stock rom .hope this would help.
I have a hd2 with blutopia n supersports rom and today has been 1 helluva messed up day seriously !( I cant think straight) its all because my phone wont work. the phone was working beautifully with android on it and out of nowhere today the screen is not responding AT ALL. its so frustrating cant make a call cant read my txts.can some 1 please just tell me what i have to do so i can get a replacement? I put hspl3 and bluetopia android and supersports rom....please tell me what rom do i need to flash to it,do i have to relock/remove hspl3? thanks if u can help me out i just cant think clearly right now
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
carl1961 said:
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
Click to expand...
Click to collapse
what about hspl3???? what do i have to do so i can send it back without tmobile asking me why is there a custom rom and hspl3 on ur phone
ihateu said:
what about hspl3????
Click to expand...
Click to collapse
will be replaced when you flash original rom
djcedric said:
will be replaced when you flash original rom
Click to expand...
Click to collapse
ok how can i get the original rom... i cant get it from tmobile website because it wants a mei # and i cant get to it on my phone cause the screen is not working
open your phone up. take the battery off. The IMEI should be there along with serial number. Good luck
Touchscreen problem
Yesterday I start with a similar problem.
Using several Android builds on the same stock memory card.
The touchscreen stops responding always when I try to
reboot or turn off the phone, the same on all Android builds
and on WinMO. But locking the phone brings the touchscreen
back to life. Then I am able to unlock the phone and the
touchscreen keeps working OK.
Will try flashing the updated stock ROM.
you run hspl3 again , but select the other option with the extra.oooo, 208.000 , by default hspl3 installs the one to allow roms to work,,, when you rerun hspl3 select the other to set back to original so you can send back to factory anfter u install the t-mobile original rom
best to read this
http://forum.xda-developers.com/showthread.php?t=653614