[REQUEST] Touch Dual Orange UK Rom - Touch Dual, MDA Touch Plus ROM Development

Hello. Could someone kindly supply me with the Orange UK ROM.
I cleverly forgot to back up and I think I'm sending my Device back for Replacement.

Same here, Ive not backed up my phone and it would be handy to have the original orange rom that came with the phone incase.

It was quite silly really. Especially when I really need it back now!
Here is backup information if you don't know how.
http://forum.xda-developers.com/showpost.php?p=1817572&postcount=2

hey, i have the original phone with original rom inside...what can i do for u?

So it's definitely an Orange UK yeh?
If you could dump your ROM with the guide here
http://forum.xda-developers.com/showpost.php?p=1817572&postcount=2
and then just upload it to something like Mega upload for me to download that would be awesome.
Thanks.

mini_man said:
So it's definitely an Orange UK yeh?
http://forum.xda-developers.com/showpost.php?p=1817572&postcount=2
Thanks.
Click to expand...
Click to collapse
Sure, orange one with 16 keys...and damn brand orange in the back of the cell
I dont know really how can do that...im newbye in this area
if u find any symple way i'll do it for u
d.

Hello.
Ok I just had a play with this and it's quite simple. I'll bundle the only files you need to make it easier
Step 1)
Connect your Touch Dual to Active Sync.
Step 2)
Unzip the file and run CMD.exe
Step 3)
Copy the code (without quotes) and right click and paste it into the command prompt.
"pdocread -w -d FLASHDR -b 0x800 -p Part01 0 0x380000 Part01.raw"
Step 4)
This might take a while so be patient, once it has finished you will be able to paste a command prompt which in this case will then be:
"pdocread -w -d FLASHDR -b 0x800 -p Part02 0 0x4560000 Part02.raw"
Step 5)
This again may take a while but when it has finished you will find two files
Part01.raw
Part02.raw
Simply add them to a compressed ZIP file.
Step 6)
Upload it to a file host such as
http://www.megaupload.com/
If you could do this for me I would be really grateful
If you have any problems with those steps just post back here
Thanks
Sam

hi,
I am dumping my uk 16key rom as we speak. I got this phone this moring. will let you know if it works later.

oooh brilliant!
Any update on this?
Did it work.
Thanks very much
Sam

I'm uploading a dump from my brother's UK Orange 16 key. Already converted it into a flashable NBH

Midget_1990 said:
I'm uploading a dump from my brother's UK Orange 16 key. Already converted it into a flashable NBH
Click to expand...
Click to collapse
Oh you are actually a legend and then a double legend for converting it to NBH format!
I don't have much money to spare but I like the look of the Donate link under your sig.

thanks midget, man!

Any update on this?

Try this: should work
http://www.chrissutcliff.co.uk/downloads/Reconstructed_OrangeUK_HTC_Nike.exe

Sweet.
I know Part1 and Part2 don't have Splash screens but does this?
If it doesn't is there anyway to get hold of the Splash screen as well?
I'm sending this back to Orange and it usually has to have the original ROM on it.
Downloading now
Thanks VERY much.

Greenturtle said:
Sweet.
I know Part1 and Part2 don't have Splash screens but does this?
If it doesn't is there anyway to get hold of the Splash screen as well?
I'm sending this back to Orange and it usually has to have the original ROM on it.
Downloading now
Thanks VERY much.
Click to expand...
Click to collapse
Ok, to send it back you will need to have 3 things...
1) Standard ROM (Above)
2) Orange Splash Screens (Working on this)
3) Standard SPL (Grab it from the HTC updates and use SSPL to flash)

thanks for that midget. beat me to it tho . I can flash to a custom rom. and have this as a backup just in case i have to send it back to orange

please re-upload file
Hi,
I've unfortunately been idiotic enough myself to flash the firmware without backing up, and now the screen is broke and i need to send the phone back for repair. However your link above no longer works, is there any change you could re-upload the ROM, i'd much appreciate it.
Thanks a lot,
Dan

Ahm ... why no one read threads?
http://www.4shared.com/file/3790598...K_1316110_Radio_Nike_1581627_signed_Ship.html
This is a Original Full Orange UK Rom! With it you can restore a Orange Niki and unbrick! It write Radio, SPL, Splash ....

Cheers mate thanks a lot, it's not bricked or anything. Just look a bit suspicious when sending it back with custom rom lol.
Btw you any idea why the hell my screen broke? It was fine then the next minute... completely broke.

Related

Crossbow in hermes

My friend just got the hermes running the crossbow os, would someone tell me how to dump the rom out? Need urgen reply cause he will leave hong kong tomorrow.
First try Buzz's rom dumper. It's available here
There are reports that it won't work which may be related to the Hermes microSD slot. I'd try the miniSD version of Buzz's pgm first.
There are various ways to dump the ROM from a live device, I don't know which one will be the most reliable or will be more helpful to reconstruct the ROM after the dump, so if possible dump the rom in all methods explained here:
1) itsutils pdocread, as explained in the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
This is IMHO the most reliable method, first use 'pdocread -l' to list all partitions, then dump ALL them in "raw" files. Feel free to ask if you need help or are unsure in any of the steps.
2) As Sleuth255 suggested, you can also try grab_it! tool from buzz, but I don't know if it will work or not.
3) There is also mamaich's TestWM5.exe, which dumps files and modules to SD card, but I think the dump will not be useful for creating a valid imgfs after, anyway try this method too.
4) It will be also useful if you dump the bootloader on this device: Run gnuharet.exe on the device, then telnet to port 9999 and issue this command: 'pwf splfile 0x30000000 0x40000' in gnuharet.exe
This will dump the running SPL in a file called "splfile" in the folder where you run gnuharet from. It will probably be corrupted by wince usb host buffers, but anyway will be useful too.
Good luck and feel free to ask if you have problems
Suspense is killing me... did we get a dump?
Also please, put the Hermes in bootloader mode (side ok + power button + softreset with stylus) and tell us exactly the IPL and SPL version you see in the tri-color screen. Probably we can investigate how to dump rom parts from bootloader using 'rbmc' command in mtty.
tsuishui said:
My friend just got the hermes running the crossbow os, would someone tell me how to dump the rom out? Need urgen reply cause he will leave hong kong tomorrow.
Click to expand...
Click to collapse
Any progress? Im all tingles here, my wife thinks im crazy...lol cannot wait to get my hands on this one...(and i dont mean my wife)
This should be interesting if he actually gets it
It is as follows
HERM100
IPL-1.00
HERM100 MFG
SPL-1.02
Ok, i will wait a while and I will provide you the commands to dump the ROM from bootloader. Meanwhile download HHD Usb Monitor trial version, and install it.
pof said:
Ok, i will wait a while and I will provide you the commands to dump the ROM from bootloader. Meanwhile download HHD Usb Monitor trial version, and install it.
Click to expand...
Click to collapse
Any idea what the chances are to create a working rom out of this?
I am out of computer right now so i will try to dump the rom later today and my friend tells me that this device is come from microsoft. Also it is the rom from t-mobile.
great news today!
Now I really can't wait for this
http://msmobiles.com/news.php/5846.html
darkjedi said:
Now I really can't wait for this
http://msmobiles.com/news.php/5846.html
Click to expand...
Click to collapse
nice tease...guess i put it up for discussion in our Hermes meeting tomorrow..
Well lookey here! M$ also released a version that runs on the HTC Wizard. The Wizard was their preferred device at MEDC 2006.
I'm really wondering why they called it WM6.0 instead of SE or 5.5...
POF and other more intelligent people than me - if we do get this ROM I am more than happy to act as a guinea pig for this!! I have 2 days off work and a brand new Hermes to mess around with!
LOL I'm sure everyone will want to be a guinea pigs for this
darkjedi said:
I'm really wondering why they called it WM6.0 instead of SE or 5.5...
Click to expand...
Click to collapse
possibly marketing...
Getting the ROM dump is only the first (most important) part. Next the talented folks here at xda developers will need to convert it to a flashable image. The Hermes architecture presents unique challenges here. I'm sure having this dump on the FTP site will add even more incentive to this effort which will also result in our ability to cook our own ROMs....

Orange Branded ROM: Dump & Rebuild ROM

Hello!
I' really new here and this is my first WinMo device.
First of all, I want to say that this forum is plenty of information but the problem is that it is too chaotic. So, I'm sorry if there are the answers to my future questions but afer hours and hours of searching I'm still confused/misty/obnubilated.
My problem:
I have an HTC Touch Dual, Orange Romania branded. It has a personalized WinMo 6 and there is not any upgrade facility from Orange to upgrade to WinMo 6.1. It has only English interface, so I think that is an WWE version.
I want to upgrade my phone to the official ROM (released in 9/10/2008) but ,first off all, I'll need to backup all my Orange-Ro ROM, to restore it in case of malfunction (sending to service) and...the most important for our community, to share this ROM to other members (especially Romanian ones) who need to restore their Orange-Ro ROM. There is not any of Orange-Ro ROM on the Internet (all the Internet!).
Well, as I said, I'm new and...noob.
I want an actualized tutorial of dumping and rebuilding ROM from those 4 files obtained. „Actualized” because of the fact that the most of the indications of dumping and rebuilding are obsolete/old.
My questions:
1. for dumping, do I need to Hard-SPL and CID-Unlock my locked device?
2. Will dumping a locked, branded ROM preserve all its state (settings, splash screen etc)?
3. Do I need to hard reset my device to return to its factory state before dumping (I want this rebuilded ROM to be „pure” withowt traces of my presence).
4. I've found this Guide for Dumping Niki . Is it still good?
5. Where can I find the „Reconstruct a Dumped ROM from Niki” Guide, to make it "flashable".
Here i found some indications from tom_codon
What we need to do now ?
1. Copy part02.raw u dumped from original rom to Tools folder and run step1.bat
2. Extract RUU_signed.nbh from Ship rom and put in ShipRom folder.
Link download :
http://www.asia.htc.com/download/RUU_Nike_HTCASIA_WWE_1.31.707.09_Radio_Nike_1.58.1 6.27_signed_Ship.zip
Or here :
http://www.asia.htc.com/download/RUU_Nike_SingTel_WWE_1.31.871.14_Radio_Nike_1.58.1 6.27_signed_Ship.zip
3. Run Reconstruct a dumped rom.cmd in my Tools and wait some times.When page DOS done it will exit .U go to Update_Rom folder already have new RUU_signed.nbh.This files reconstructed your original Rom with your languages.
Have funs..!
Click to expand...
Click to collapse
So what about part00.raw, part03.raw and raw04? For example I know that part00.raw IPL, SPL and Splashscreen. I'll need the Orange Splashscreen for this ROM (in fact, I need a perfect copy of this ROM). Can I put all the raws in the „Base ROM” folder?
Also, the "RUU_signed.nbh"file from Ship ROM...
I want to remember that the Orange ROM is a WinMo 6 one!
Thanks in advance. I'll be back for new questions.

boot splash for hermes tools wanted

Anyone know tool for 1st splash screen edit?
here http://forum.xda-developers.com/showthread.php?t=317726
but I am not sure Is it work for Hermes?
*Many of ROM Cook got really great job
But I also want to make my first boot splash without harm entire ROM
like http://forum.xda-developers.com/attachment.php?attachmentid=58325&d=1195153328
(only splash boot replacement)
It would be also more fun and life up for Hermes,
You can also upload your original splash boot for each Hermes
for me (Dopod 838Pro) which don't have yet -its gone by another ROM replaced
Thanks
i'm too worked with bootsplash & all well done. you can learn in from wiki or just ask from josh (or from hers kitchen thread). i have downloaded this tool from captfiero.com/roms/joshkoss/tools/. & now in this server not worked server list.
Or just use Search
you can edit&replace or delete first & second bootsplashs via Good NBHTool app.
you can get it from attach file
good lucky
Thanks for your answer
nurkamol said:
i'm too worked with bootsplash & all well done. you can learn in from wiki or just ask from josh (or from hers kitchen thread). i have downloaded this tool from captfiero.com/roms/joshkoss/tools/. & now in this server not worked server list.
Or just use Search
you can edit&replace or delete first & second bootsplashs via Good NBHTool app.
you can get it from attach file
good lucky
Click to expand...
Click to collapse
What next should I do after got 2 .nb files
Do I have to convert and what next
and What tools for that ?
Sorry for my baby question
* I got dutty's good nbh tool v1.1
but for NB to NBH
it asking many IP:,SPL Splash radio....
if I just enter only 1,2 splash and made nbh then keep in RUU
the flash it will work or not
(I really scary if flashed and my rom never come back)
Thank in advance

How To Unlock HTC Hero (especially the Orange UK)

----
update:
-- just2mention: (22.03.2010)
latest HTC update (ROM Version:2.73.61.66 for Orange /Release Date: 2010-02-04)
and ROOT rights + flashing custom ROMS will NOT WORK
check page (3) for further information and problem solving :=)
------------------
continuing with original post
---------------------------------------------------------------------------
hey guys,
i bought my HTC Hero (Orange UK) locked a few days ago, and it arrived yesterday at morning
I spent at least 12h trying to unlock it :=) reading all posts over the whole www At 6am in the morning today, i finally could say: yeah i got it unlocked :=) and yeah, i also got the firmware downgraded
So, there is just one requirement (if anyone did it without one, please let me know): At least, for some time (borrowed from a friend) you need an Orange-Sim-Card
You need it to logg into your phone once, so that your pc installs the correct adb interface drivers (if you never got a sim card, you will never be able to contact adb interface) and enable the usb debugging mode on your android phone (so that adb works).
Otherwise i wouldn't have been able to get the Point 1 done correctly. (get the CID...)
=> Other Things you need to install:
- unlock code (maybe from http://www.unlock-now.com/)
- Android SDK
- i took the normal usb drivers (sdk-supports, folder "usb-driver")
so the exact how to:
1) at first (there is no way to bypass it) do exactly the following (create a Gold-Card):
Create a Goldcard (xda-post)
2) flash a custom recovery rom via adb interface (Android SDK):
Code:
adb shell reboot bootloader
fastboot boot recovery-RA-HERO-v1.2.3.img
adb shell mount /sdcard
adb push recovery-RA-HERO-v1.2.3.img /sdcard/recovery-RA-HERO-v1.2.3.img
adb shell flash_image recovery /sdcard/recovery-RA-HERO-v1.2.3.img
adb shell reboot
(got code from: http://forum.xda-developers.com/showthread.php?t=561124
3) Now you can flash any rom u like (maybe at first, if everything works, do a custom backup (nandroid))
i chose: HTC Generic 2.73.405.38
originally from: http://android.modaco.com/content/htc-hero-hero-modaco-com/291942/09-10-hero-roms-radios-in-update-zip-format/
really important: check the requirements above!
get access to an orange sim card. not important which one...
live here in austria, and got an AUT-Orange Card from a friend, but I think you definitely need one!
This was performed on a Windows 7 64 bit machine
greets && good luck to everyone who does this, hope this saves you a lot of time!
I am a novice and having probs....will be trying these steps over the weekend but a few questions in the meantime:-
I can successfully create a goldcard...
but the ROM downgrade bombs out with the 131 error which I believe is because Orange have tweaked it and is effectively locked to them?
Does the custom recovery get around the downgrading problem? I'm guessing it replaces the 'Orange Rom' with a basic image?
If the custom recovery is successful, are you 'unlocked' at that stage? Is your phone bricked if the custom recovery fails?
If the custom recovery is successful, does that give you the ability to do a Nandroid backup or are there specific steps that need to be done first?....(where does Nandroid backup the image to?...sd card? another part of the phone memory?
If custom recovery is successful, is it simply a case of getting the rom you want (such as modaco) and then launching it from the pc with your phone synched and goldcard inserted?
Apologies for all the questions but I'm trying to get my head around how this whole process works. Thanks for any help.
Trying hard to see the point of this thread/poll, when this method for unlocking the Orange Hero has been known for a while now!
Regards,
Dave
Paradaz said:
I can successfully create a goldcard...
but the ROM downgrade bombs out with the 131 error which I believe is because Orange have tweaked it and is effectively locked to them?
Click to expand...
Click to collapse
sry, never seen before
Paradaz said:
Does the custom recovery get around the downgrading problem? I'm guessing it replaces the 'Orange Rom' with a basic image?
Click to expand...
Click to collapse
custom recovery, i think, replaces just the "recovery" ;=) boot loader image, the running rom stays the same meanwhile
Paradaz said:
If the custom recovery is successful, are you 'unlocked' at that stage? Is your phone bricked if the custom recovery fails?
Click to expand...
Click to collapse
not yet regarding to above, the rom hasn't change and so the unlock key, won't work either.
Paradaz said:
If the custom recovery is successful, does that give you the ability to do a Nandroid backup or are there specific steps that need to be done first?....(where does Nandroid backup the image to?...sd card? another part of the phone memory?
Click to expand...
Click to collapse
no, if the custom recovery is complete, you can do an nandroid backup as u like. it backups directly to /sdcard/nandroid/..
Paradaz said:
If custom recovery is successful, is it simply a case of getting the rom you want (such as modaco) and then launching it from the pc with your phone synched and goldcard inserted?
Click to expand...
Click to collapse
it the easiest thing you can imagine, put the downloaded rom onto the sd drive, custom recovery lets you choose "restore: browse" you select the image file directly on your sdcard (name doesn't matteR) , wait , and it's done
Paradaz said:
Apologies for all the questions but I'm trying to get my head around how this whole process works. Thanks for any help.
Click to expand...
Click to collapse
never mind i'm welcome to answer your questions
good luck!
The one Thing i forgot above, i bought a unlock key on
http://www.unlock-now.com/
should be clear
foxmeister said:
Trying hard to see the point of this thread/poll, when this method for unlocking the Orange Hero has been known for a while now!
Click to expand...
Click to collapse
but never summed up to one thread
from the beginning to the end.
greets
I presume that the 'recovery' is not available on the phone by default? When I hold the home key after powering on, it just has a sort of warning picture next to the phone.....no text displayed and no buttons do anything at that stage, only option is to take the battery out to kill the power.
Gonna have a go at unlocking this using the instructions later tonight.
I have finally got my Orange UK Hero sorted out.......
to cut a long story short, I had the most recent Orange UK ROM, which stops the custom recovery and doesn't alllow a change of bootloader (I got the 'remote ID' error when following your instructions and therefore couldn't flash it using your method.
In the end I went down the 'flashrec' route and eventually managed to get a standard ROM on, backed it up with Nandroid and then unlocked the mobile. Took a lot of hours faffing around and I'm starting to understand how it all fits together now...thanks for the steer. Regards Daz
Paradaz said:
I presume that the 'recovery' is not available on the phone by default? .
Click to expand...
Click to collapse
Thats exactly why you have to do this whole procedure
good luck!
does the website provide the unlocking code for 3 Network locked Hero,thanks
can't tell you, just that they don't work with orange ;=) except you reflesh, but i read over the net, that the keys work in 98% of all cases.
hi
i was wondering after the goldcard thing do i have to follow the flashrec thing? because since i dont have a network i won't be able to download a file manager.
shaff said:
i was wondering after the goldcard thing do i have to follow the flashrec thing? because since i dont have a network i won't be able to download a file manager.
Click to expand...
Click to collapse
without any network connection, i don't think it will be possible...
sry && greetings,
Just to let you know my solution, as I had a PM asking for assistance.
Basically the goldcard method didn't work for me, (creating it was fine, but that's as far as it got)....after research I found out that the most recent Orange Hero's have firmware installed which blocks this process.
Anyway, I used the flashrec method, instructions are here
The url above also has the links to the two files that you need to pull this off. These aren't my instructions so credit to the author.
I have done this on two HTC Hero's now which were both locked to Orange, and they both sailed through without a problem. I also bought my unlock codes from www.htccode.com and had them both unlocked about 5 minutes after payment by PayPal.
Hope this helps anyone else with the 131 error problems (Orange firmware blocking the goldcard method) and thanks for crazyVII (thread starter) for also helping me out.
hi i am totally new to android thing and this all process. sorry if i sound stupid. when i try to run adb while creating gold card it comes on as dost windows and goes off instantly cant type any command whatsoever can u plz tell me wts wrong and i've tried on windows 7 and xp as well thanks in advance
br
it looks like you got an adb problem.
try this to see the message:
open a console window ( start-> run -> type "cmd" - pressENTER )
then run the command again!
good look!
OK, there is a very easy way.
Just upgrade your orange firmware to the oranges official latest firmware: ROM Version:2.73.61.66 for Orange
download here:
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=864&news_id=514
Then you can just use the codes that you have and it will unlock the device!
you can get the code from:
http://www.unlock-now.com/
Hope this helps
cheers
hey, thx for the post )
some more questions ;=)
can you explain what this update contains? is it already android 2.1?
does it realy work
what does your little orange logo in the right upper corner of your user-box mean ? ;D
sry man would be glad for info // affirmation
greets
hi
benedict.s
thanks alot brother u saved my time thanks very much
It would be so good if this would work for Orange romania also but when i try to download the update by entering the s/n it says that the upload is not for me. so i should wait ahwhile i guess.
crazyVII said:
hey, thx for the post )
some more questions ;=)
can you explain what this update contains? is it already android 2.1?
does it realy work
what does your little orange logo in the right upper corner of your user-box mean ? ;D
sry man would be glad for info // affirmation
greets
Click to expand...
Click to collapse
It definitely wont be Android 2.1 as it hasn't been released yet, you will know for sure when it is released as EVERYONE will be talking about it!!!
Does it really work?... Hmmm,... I *think* so, but I only assume that from IRFAN99's comment saying...
irfan99 said:
benedict.s
thanks alot brother u saved my time thanks very much
Click to expand...
Click to collapse
But dont take that as gospel, you know what they say, "assumption is the mother of all f*~K ups"!!!
Can anyone please confirm if that works????
..... And the Orange logo is just referring to the network that BENEDICT.S is on, you can select yours in your profile settings.
And lastly,...
kasmq said:
It would be so good if this would work for Orange romania also but when i try to download the update by entering the s/n it says that the upload is not for me. so i should wait ahwhile i guess.
Click to expand...
Click to collapse
You can get the update that BENEDICT.S is talking about from here,... http://forum.xda-developers.com/showthread.php?t=559622
Let us know how it goes yeah?!
Peace out.
.

Back to AT&T Stock 6.1 6601 in 4 Steps

This post is for people who have already upgraded their Streaks and know the basics. This guide won't help you upgrade or root.
I spent over 24 hours trying to get my Streak back to stock. I was not happy with the O2 branding, Performance, and aesthetics of 2.1 so I wanted to go back but every method I found online didn't work for me. So I created my own little method.
Note: All the files you need are in a zip file below. The hardest part for me was finding files that worked and/or were not dead links. But if you download my files and use this guide I'm not responsible if you screw up.
Step 1: Download Zip File
It has everything you will need in order to Downgrade.
Step 2: Downgrade to a stock O2 build of 1.6 (important)
- Place the Step 2 Update.pkg on the root of your sdcard.
- Place Step 2 Recovery folder where you can get to it using CMD / Terminal via Fastboot
- Place your Streak in fastboot mode
- Type this command into CMD or Terminal " fastboot -i 0x413c flash recovery recovery.stock.new.img "
- Once the streak shows done pull out the battery and replace it, then boot using volume keys
- Update from sd card
Step 3: Clockworkmod Recovery
- Place Step 3 clockwork folder where you can get to it using CMD / Terminal via Fastboot
- Place Step 3 clockworkmod folder on the root of your sdcard
- Place your Streak in fastboot mode
- Type this command into CMD or Terminal " fastboot -i 0x413c flash recovery recovery.img "
- Once the streak shows done pull out the battery and replace it, then boot using volume keys
- Update from sd card
Step 4: Nandroid (almost done)
- Once your in the clockworkmod recovery menu select nandriod using the volume and camera buttons
- Select Restore
- Now you will see Niles Method, Select it and wait for the restore to finish.
- Once it's done reboot the system using nandroid or the battery pull method.
- During boot up if your keys don't blink then your done enjoy, if your keys blink then go to step 5
Step 5: Stop the flashing
- If you got this far then I'm sure you know how to root your device. So all you need to do is run the r2 superboot in Step 5 folder.
And thats it folks. The above worked for me and a number of other people and their streaks. I can't guarantee that it will work for everyone but other methods I found online did not work for myself and the others at all.
Sorry but to go back to 6601 you should follow thid thread
http://forum.xda-developers.com/showthread.php?t=778397
geek78 said:
Sorry but to go back to 6601 you should follow thid thread
http://forum.xda-developers.com/showthread.php?t=778397
Click to expand...
Click to collapse
I tried that one and along with a few other people and we did not seem to get that method working, 3 out of the 5 of us did. The other two of us used a mixture of methods in order to get it to work. As explained above.
I believe you had a personal investment in the one you linked to, it's nothing personal but not every method works for every person like it did not work for some of us. Don't get defensive it does not matter about which they use as long as people have multiple methods to try if they get stuck. It's all about helping the user right? at least I thought it was.
Many thxz mikeniles. I have been trying to go back for a few days now i most have sending back the streak to dell for warranty exchange. Did tried a few others I think like the one above also with the one that is for the macs and nothing,
thxz for putting the files in one places to find them all is hard like the one that is above has link that takes me to another sites not the files.
like you saysd above it is about the helping everyone and when dell send me back the new one will not do update until ready for.
this is my first posts because my english is bad and say thank you please dont make fun of.
clark kent
ThatGuyClark said:
this is my first posts because my english is bad and say thank you please dont make fun of.
Click to expand...
Click to collapse
That guy clark, no one here will make fun of your english it's not that type of place we are all just here to help and or in my case learn.
No thanks needed brother it's a team effort someone else put the files online I just found them. Someone else came up with the methods I based mine off of. All I did was put them together in one file and share with you the mixture that worked for me. Every single person on this forum is why you got yours working not just me.
Not sure why you have to send your streak in but good luck with it and don't be afraid of people making fun of you, Your voice counts.
Always good to have alternative ways as people are running different systems and configurations.
Were you able to get oem-version back to 31-us or is it still at 21-us?
Sent from my Dell Streak using XDA App
When I get to step 2 update from SD card, I get all files are up to date...rebooting in 30 seconds. Any ideas?
alright i am successfully back to us 6601. but my baseband version
GAUSB1A110421US and OemVersion GAUSB1A111231. am i 100% back to stock?
HELP .
On step 4 I keep getting
Checking MD5 sums…
MD5 mismatch!
E:Can’t Find MISC:
How can I solve this ?
notoriousguy said:
On step 4 I keep getting
Checking MD5 sums…
MD5 mismatch!
E:Can’t Find MISC:
How can I solve this ?
Click to expand...
Click to collapse
Same problem here.
UPDATE:
So I went back to the other instructions [HOW-To] Go back from O2 2.1 to Stock at&t 6601 WITH BASEBAND DOWNGRADE and just did Step 2. It took a bit of time, but came out perfect! Thanks to everyone's helpful comments.
tltwelve said:
alright i am successfully back to us 6601. but my baseband version
GAUSB1A110421US and OemVersion GAUSB1A111231. am i 100% back to stock?
Click to expand...
Click to collapse
I've got a stock att, baseband is xxx231-US and oem is 231
aaronkalb said:
Same problem here.
UPDATE:
So I went back to the other instructions [HOW-To] Go back from O2 2.1 to Stock at&t 6601 WITH BASEBAND DOWNGRADE and just did Step 2. It took a bit of time, but came out perfect! Thanks to everyone's helpful comments.
Click to expand...
Click to collapse
can you help me ? i tried doing the step 2 but i didnt understand about the files in the correct folder and the thing it asked .. I would appreciated it if you can help me out
Are you still stuck, sorry I have been MIA, Droid stuff is a hobby it does not pay the bills. Let me know if you need help still.
6.1???
I was shocked when I saw the title
"Back to AT&T Stock 6.1 6601 in 4 Steps"
Your method doesn't work because it produces MD5 Mismatch when you try to run it.
Worse yet, your method broke my phone because once you install that version of clockwork recovery, you can't install any other version without it just blackscreening. Worse yet, that version doesn't work for regular packages either. *Many hours of trial an error just to get it back to working, still no ATT rom.

Categories

Resources