22 Pin connector - MDA III, XDA III, PDA2k, 9090 Accessories

Peeps,
Can someone confirm this is the correct connector for the BA. My German is not good enough!
http://www.haid-services.de/stecker...eckersatz-ipaq-38xx-39xx-54xx-22xx-mdaxda.htm
Thanks
Mike

sorted found a US site that sells them.

Related

can anyone take a look here?

since last month i am searching for this phone but not succeded i have posted in my forum but no one replied yet
i just wanna buy xdaIIs or pda2k
http://forum.gsmhosting.com/vbb/showthread.php?t=179761
looking forward for the sooner response :evil:
Ehhh...
You know..
They sell these all over the place..
Try your local cellphone dealer, or e-bay, or on the page you got the picture from..
Expansys..
Try froogle.com for Gods sake!
---- Edit reason ----
Corrected spelling "or ene the page" to "or on the page".
I don't think they have a local reseller in heaven
Try "PDA2K Pakistan" or "PDA2K Heaven" in Google...
PDA2k or counterparts
You can try the Imate store but the best place to go is Ebay in US, or Canada, or UK, well you get the idea. That is were I got my MDA III from and Problaby were alot of the people here on this forum got there devices from as well. If you want a good case for it I went and got a Krusell which you can get from the Imate store and sometimes on Ebay. I spent more time getting a case than I did a unit. Good luck and Happy Hunting!
BTW: Check out Ebay USA seller : madmonkeyboy . He has some deivces and extra batteries.
thx guys,
i have just purchased pda2k. and i love this matchless device
and failed to upload themes
these are *.tsk files please guide me how to upload???? :roll:

How do you take off the Wizards housing?

Hello,
I ordered a new full set housing for my Cingular 8125 and it should come in the next week or two. When I get it, whats the best way to remove the original housing?
I have absoluteley no Idea how to change the housing, but don't forget to make pictures while you change.
Thanks,
Andre
Where did you get the new housing and is it different from the original one?
GSXR_6 said:
Where did you get the new housing and is it different from the original one?
Click to expand...
Click to collapse
The 8125 wizard casing is all over ebay but some sellers charge upto $90 for it! You should find dissassembly instructions in the service manual on the FTP site. I have the MDA vario wizard casing ( no stubby aeriel ) listed on ebay under id fluffcat1.
Richard
I too would like to change my 8125 housing. I dropped mine the day after I bought it. I think the stock case was my problem. I hate tucking it in and out of that thing. I have another one coming and want to get another housing.
GSXR_6:
Where can I locate the FTP site. Sorry, I'm new and this is my first post.
I also thought of reworking the color of the housing once the warranty is passed.
Here we go, 3rd attempt (having issues with attaching file.)
HTC Wizard WIZA200 housing with MDA T-MOBILE written on bottom left and right:
Ebay Item Number 130005148788
2 more housings (almost double the price of previous) with T-MOBILE written on bottom center:
Ebay Item Number 9733402561
Ebay Item Number 9141941613
And the attached service manual is the one from the FTP just renamed from Prodigy to Wiard so i could locate it easier on my pc.
Also when disassembling your device watch out for the clips, i've broken a total of like 4 or 5 on my device, although when all put back together it is good as new.
ok, stupid thing doesn't want to attach.go to the Wiki of this site and theres an ftp tutorial of how to get to it.
Can someone please link me to the ftp page where I can download the instructions on how to replace my wizard's housing? I can't find it on the ftp site.
fone_fanatic said:
Here we go, 3rd attempt (having issues with attaching file.)
HTC Wizard WIZA200 housing with MDA T-MOBILE written on bottom left and right:
Ebay Item Number 130005148788
Click to expand...
Click to collapse
That's my auction
They are both original BTW, mine are t-mobile UK 'MDA vario' cases and Che_sir's are US spec - the only difference being the placing of the logos.
I only have limited quantities ( 2 left for now) and che_sir seems to have loads of 'em.
Che_sir also has digitisers and other parts that I simply cannot get hold of :-(
But I'm cheaper
Richard
HAHA, I think i messaged you on ebay asking about other parts for the wizard. Well i might have to buy one of the cases, depending on the damaged wizard i just bought on ebay for parts. We'll see.
Cingular 8125 & T-Mobile MDA
Even though these 2 are the varient from Wizard, but is the housing interchangable? What I mean is buying a Cingular housing for T-Mobile MDA. Is there a good place to buy T-Mobile MDA housing other than ebay? Thanks!! 8)
Check the FTP.
jetfxr27 said:
PM me. I have the HTC Wizard service manual .pdf. Perfect details.
Click to expand...
Click to collapse
It's also in the FTP or at least was - thats where most people got it from :wink:
Richard
how to remove mda/8125 cover
Guys,
if you're still interested in "how to open the mda apart & change the cover" then tell me and I'll try my best to explain it.
it's a long story.
Tall_Man said:
Guys,
if you're still interested in "how to open the mda apart & change the cover" then tell me and I'll try my best to explain it.
it's a long story.
Click to expand...
Click to collapse
Im so interested to know how .. and if you do have pictures then you saved my life if not atleast you helped me and guided me (thanks in advance).
if you do have a pdf file or anything like other members said send it to my email address if you dont mind.
please reply me back as soon as possible
my email [email protected]
Disassembly of the 8125 (Dopod 838 case) is a little bit different from the Tmobile mda (Qtek 9100) casing. I still haven't found instructions for the 8125 but for the mda, its on the ftp site.
clemsyn said:
Disassembly of the 8125 (Dopod 838 case) is a little bit different from the Tmobile mda (Qtek 9100) casing. I still haven't found instructions for the 8125 but for the mda, its on the ftp site.
Click to expand...
Click to collapse
Sorry for bumping up an old thread but anybody ever find a manual or figure out how to do it? Debating whether or not to get a new housing or purchase a clear case and paint it...
look down
bbobeckyj said:
look down
Click to expand...
Click to collapse
That's the service manual for the Wiza200... we're looking for the service manual for the Wiza100...
Disassembling is different between the two models...
Tsuioku said:
That's the service Wimanual for the Wiza200... we're looking for the service manual for the za100...
Disassembling is different between the two models...
Click to expand...
Click to collapse
i didn't realize the that the 8125 was the wiza 100 (and it looks imo)
how different can it be, is it not just the shape of the housing, meaning the clips and principles must be same/similar
anyway here is another guide to disassembly (actually the stylus fix) still of the wiza200 but the pictures may be clearer if it may help
vlestat123 said:
Im so interested to know how .. and if you do have pictures then you saved my life if not atleast you helped me and guided me (thanks in advance).
if you do have a pdf file or anything like other members said send it to my email address if you dont mind.
please reply me back as soon as possible
my email [email protected]
Click to expand...
Click to collapse
X2 !
Can you send me?
my email: [email protected]
thanks!

LCD replacement

Hi all.
Sorry for my english, i´m student.
ok lets go.
I´ve bought a nicely second hand hermes, but want to replace the lcd screen. I was searching the web, but no results.
Any idea????
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
That's the site found in the XDA WIKI.
Good Luck!
If you live in Europe there is an excellent service center in Hungary. Unfortunately I've lost their data; but you still can send an e-mail to htc guys at http://www.europe.htc.com/ and they will redirect you.
cnn.cn
cnn.cn has it all
HTC repair in Europe
The address of the service center for Europe is:
E-care Solution Kft.
Szent Laszlo Ter 20.
1105 Budapest.
Jozsef Pataki
Account Manager
E-Care Solutions Kft.
A DBH INTERNATIONAL GROUP MEMBER
Rotterdam - Budapest -Debrecen- Kosice
20. Szent Laszlo ter, H-1102 Budapest
Tel +36 1 431 8120 Fax +36 1 431 8122
Mobile +36 30 222 5562
www.e-care.hu <http://www.e-care.hu>
www.dbh-group.com <http://www.dbh-group.com>
Ebay
I got a replacement screen on Ebay. The Touch Screen on mine broke and I didn't want to pay £100 to fix it. I got mine for £30 and had to buy a screwdriver set to install it.
This is the link for the screen i required.
http://cgi.ebay.co.uk/O2-XDA-Mini-D...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Also have a look on ebay for a TORX STAR SCREWDRIVER SET. You will need one to remove the old screen.
Try to take the old screen out before you buy a new one. Make sure the serial number is the same.
Good Luck.
Matt

antenna and mic parts for 8525

hello,
im new to this forum and i hope i am posting in the correct area. i have 2 htc8525 pda's. one is unlocked with wm6 and the other is locked through cingular with wm5. i will have the other unlocked and upgraded soon. what i need is some help locating a few parts for the 8525. i have contacted htc directly, including their accessory department and im not having luck. i have downloaded an htc service manual and found the following part numbers and decriptions for what i need. i need two of each of the following and was wondering if anyone knows where i can get them and how much. they are: antenna rubber plug(on the back next to the camera) part number: 76h001167-00m qty. 2 and microphone rubber cover(on the inside of the phone) 76h001151-00m qty. 2.
thank you,
nick
I'm thinking about parting out my 8525 that has the white screen problem. If you're in the US and need the antenna, shoot me a PM.

Looking For internal UMTS antenna cable

Hey everyone.
I bought a used, broken G1 off ebay and now that I've gotten it rooted & booted I've found that I am missing the longer (80mm) internal antenna cable that connects the motherboard to the UMTS antenna pcb. Without this cable there is no cell service to the phone so right now its pretty much a PDA and I'm carying around my old phone and my G1.
Since I know there are probably a bunch of users on this forum with broken G1's being kept for parts I thought I'd ask if there is anyone willing to part with one of those cables?
I'm in the US (San Diego, CA) and I'll gladly pay any reasonable shipping and "handling" costs...
Thanks.
You're best bet would be to find a broken one on ebay probably.
Not sure if this is what you're looking for but it's a GREAT resource to have for your phone.
http://cnn.cn/shop/htc-g1-dream-c-277_615.html
dang im looking for this wire also.... let me know if you find where to get one.... i'll let you know if i find a place also.
Anyone ever manage to find one of these ?

Categories

Resources