So, a few days ago I flashed to the 2.2.1 (and radio 3.27) release (thanks so much for all your work dcd!). I didn't really notice until today that the vibrate function isn't working. I hopped on here and searched around and came up with nada... other than 2.2.3 was released. Flashed up to that, same thing. Everything seems to work fine other than vibrate.
Anyone have any ideas?
Are you sure the vibration motor is functioning? For instance when you power it on does it vibrate for a split second?
it doesn't, that's actually how I noticed that it wasn't working.
Did you do any registry hacks or use any apps to disable the flashing LED? The vibrate function is tied to the LED flashing and disabling it in certain ways will kill the vibrate functionality with it.
negative... I have a clean install of 2.2.3 with no hacks or modifications applied to it. in my searching yesterday, I came across references to HKLM\SOFTWARE\OEM\VIB and \HKLM\Drivers\BuiltIn\AllLEDMgr but neither of these had any impact.
I had this same issue and the only workaround that I came across was to hit ok when closing the email program instead of closing it by tapping on the X. One other workaround is if you use programs like SPB Pocket Plus, add the tmail.exe to your close exceptions and vibrate will work as normal.
Hope this helps
No problems here with Vibrate
Only programs I have loaded other than the 2.2.3 rom are SPB Phone Suite and PointUI 1.02B.
I am really hoping this is something that can be fixed, I really don't want to have to flash back to stock and get a new one under warranty.
If you soft-reset your phone, does it do that quick vibrate? If so, hardware is intact
bimmerd00d said:
If you soft-reset your phone, does it do that quick vibrate? If so, hardware is intact
Click to expand...
Click to collapse
(see above) nope, no quick buzz
N715DP said:
(see above) nope, no quick buzz
Click to expand...
Click to collapse
aye, my fault. It's still early and I haven't started reading yet. That sucks about your vib, Has to be a hardware fault. i thought i had my first contribution to XDA with this one, thanks for shooting it down.
sorry about that, I am sure you'll get one soon
Related
Hi, this thread is here for posts that has no room in technical discussion related to this rom. From tech discussion, irrelevent posts will be deleted without excuse, without reason. So here's the correct place for them...
Well done
I just wanted to say well done for the new fast clean rom. I'm finally over 2.5!
Everything I need to work works and well and fast. Thankyou !
Now how do we get the touch interface on the Charmer as they seem to be getting working on the Prophet??? Maybe wrong place to ask, will wait. In the meantime, thankyou again.
the bt works fine with car set
"Now how do we get the touch interface on the Charmer as they seem to be getting working on the Prophet??? Maybe wrong place to ask, will wait. In the meantime, thankyou again."
it's available for wizards - search their forums: http://forum.xda-developers.com/showthread.php?t=313656
"the bt works fine with car set "
nice to hear...go on with testing
WIFI confirmed
WIFI SDIO function has been confirmed by beta tester, loskarlitos - with some limitations like control panel not working , WIFI connection has been confirmed as stable and able to survive standby mode
Thanks Loskarlitos!
Excellent, a new rom to try!!
I can't believe I have only just found this. I could have been playing with it this evening. Its a little late to start messing now!!!
Thanks for all the hard work Nocturne.
nocturne.op.15 said:
WIFI SDIO function has been confirmed by beta tester, loskarlitos - with some limitations like control panel not working , WIFI connection has been confirmed as stable and able to survive standby mode
Thanks Loskarlitos!
Click to expand...
Click to collapse
i think the wifi control panel only works with built in hardware. thats why its removed from the official charmer roms.
hope you are right. i wil think about removal of it for the next ver.
nocturne.op.15 said:
hope you are right. i wil think about removal of it for the next ver.
Click to expand...
Click to collapse
I dont know if that's such a good idea. Some people use SDIO wifi cards and find those wifi settings useful.
Cheers,
vlodeck
as reported from my beta man, loskarlitos, and as reported above, this wifi settings applet seems to be working only with built-in wifi modules, settings are inactive for sdio cards.
Wifi SDIO owners, please share your experineces - than i can build fully functional rom stripped down from useless parts
Hi,
first of all amazing rom. Really really fast. It syncs great under Vista. To flash from Vista you have to use the "Another Flash Method". I encountered no problems with the 12 apps running, alarm or landscape problem.
Only the Calender and Contact buttons are still hardcoded to Start and Back.
problem with alarm was solved - it was really caused by underclocking charmer down to 95mhz (I'm using BatteryStatus for dynamic overclocking. 95MHz is simply not enough power to bring alarm window up and system behaves strange)
problem with changing landscape/portrait disappeared and never came back - but will keep it in buglist until this is really confirmed
lagge number of running apps stil remains - if lot of apps running, softkeys are not working as they should...hope somebody could try this on another wm6 device?
Calendar and Contacts issue
Been testing this rom for a day or two - I get the problem where Calendar and contacts won't start (whether from soft keys or the Start menu) and I have to soft-reset to egt it working. I admit I have been using iContact as well so I will uninstall that for a few days and see if the problem goes away.
closing some apps does not help? it helps for me...
customization?
Hi, when i flash yours new rom and make HR system was start and customization from old wm5 was started. In rom 4.4 customization was not started after HR, is this was changed in this release?
sorry for my english....
This was reported and will be modyfied in next ver. Till then, just skip the customization after HR
Ring tone changes....
Hi, next thing is that my ring tone changes to default without my command. I've seen this before in previous roms but in 4.4 it was ok.
I installed this last night. Seems nice and fast.
I noticed that the phone pad SIP and MMS are missing. (Installed these manually)
Also, i'm afraid the Bluetooth A2DP appears to still be the older, poorer quality version.
Cheers
phonepad sip is missing because i don't like it - it is not necessary. everybody can install it easily manually. but it will not eat precious memmory for us who does not use it ,-)
MMS support is there - no problem with it, thing you report is a bit strange...
it's hard with A2DP. Some testers were reporting it's the best A2dp they have seen - you tell the opposite. The worst thing is that i cannot test it - i do not have a2dp device :-( is possible that transfer quality is also dependent on used HW?
regarding those ringtone changes - i was testing this today (about 10 calls, some restarts etc - no problem. aren't you using any 3rd party software for phone profiles or things like that? I saw this with pocket zen phone..if not, try please to search for some dependency of this behavior so i can repair it
Thanks Nocturne.
I'm really starting to think I've flashed the wrong ROM. I've got so many on my PC now.
Can you confirm what I should be seeing under Device Information?
Thanks
I'm on a 5060 build using the Kitchen. I have HTC Home, S2U2, and anything else that was defaulted in the settings from the basekit.
I had the same problem on DCD 3.0.1 and nue 5054 and 5059. I was told it was advanced config, so I reflashed 5059 without AC, then 5060 without it. The device worked great yesterday, but this morning I couldn't answer the phone again.
I had found something that added a change soft key setting to the systems tab, I installed that and changed the setting to messaging instead of calendar, and that's when the issue returned, so I figured it was something to do with the that. I did a hard reset but the issue still remains. My next resort is a re-flash, but I really don't want to go through all that if I can avoid it.
clamknuckle said:
I'm on a 5060 build using the Kitchen. I have HTC Home, S2U2, and anything else that was defaulted in the settings from the basekit.
I had the same problem on DCD 3.0.1 and nue 5054 and 5059. I was told it was advanced config, so I reflashed 5059 without AC, then 5060 without it. The device worked great yesterday, but this morning I couldn't answer the phone again.
I had found something that added a change soft key setting to the systems tab, I installed that and changed the setting to messaging instead of calendar, and that's when the issue returned, so I figured it was something to do with the that. I did a hard reset but the issue still remains. My next resort is a re-flash, but I really don't want to go through all that if I can avoid it.
Click to expand...
Click to collapse
What do you mean you cannot answer your phone?
The calls don't go through, you cannot use the send key, what's up?
I press the answer softkey or the hardware key, and it doesn't work most of the time. It will mute the ringer, but will not answer the call.
This has been discussed elsewhere in this forum and on brand X. I also had a problem with the phone not answering. If you believe what they say....and I've tried it and it seems to be working for me now......reload a ROM without Advanced Config. This seems to be the common thread to the problem....Now my calls answer almost immediately. Try it...see if it solves the problem
I did that. My 5060 build didn't have AC in it at all.
Do you have SPB Pocket Plus installed? I had the same problems, but it hasn't returned since I uninstalled PocketPlus...
Nope. No SPB. Only default 5060 basekit and HTC home/S2U2.
I've actually gone ahead and re-flashed back to Sprint 3.35, which sucks because I really really liked the 6.1 threaded SMS, but a phone that I can't answer doesn't really do me any good.
I'll just have to wait for an official 6.1 I guess.
clamknuckle said:
Nope. No SPB. Only default 5060 basekit and HTC home/S2U2.
I've actually gone ahead and re-flashed back to Sprint 3.35, which sucks because I really really liked the 6.1 threaded SMS, but a phone that I can't answer doesn't really do me any good.
I'll just have to wait for an official 6.1 I guess.
Click to expand...
Click to collapse
the new PocketCM comes with threaded text..
A little update.
The GPRS_bye_if_device_off registry hack is what was causing me not to be able to answer my phone. It was supposed to improve battery life.
I had ran no2chem 5060 for a few weeks without it happening, then went to DCD 3.0.4 and it didn't happen until last night, I tried that hack. Sure enough, after the reboot, that hack is what did it. I was doing this hack just to test that theory so had a back up. I restored it and now the phone works properly again.
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
xborfi said:
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
Click to expand...
Click to collapse
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
dioxda2 said:
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
Click to expand...
Click to collapse
thanks for your attention. I am now downloading it and let you know the results. thanks
Kornad 3.1 faild
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
xborfi said:
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
Click to expand...
Click to collapse
I am currently using this 3.1, keypad tones working fine (do you mean this? ).... ( Mine is a G3)
1. Is your speaker works fine? ( like playing music...)
2. did you try a hard reset?
3. optional flash with the lazy tool,
4.
yes, I did all steps except 3. Ill upgrade with that and inform you the results.
BTW please press around 50+ time on keypad to here keypad tones. they suddenly stop! my device is G4. I know that G3 sre better than G4 in wm6&6.1
thanks
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
paul c said:
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
Click to expand...
Click to collapse
Thanks for sharing...
i'm having the same problems sometimes. it happens mainly after changing the volume via the up/down switch from off to vibrate or back to certain volume.
the solution is the same as in the first post is mentioned. go to sounds & notifications and there to incoming textmessage. play the ringtone. sometimes a second time doing that is necessary.
but as im testing many roms as well, it happens very often on wm6.1, not so often in wm6.
before i forget to mention, i own a G4 Xda Neo.
//edit: another problem i had once was after using Shadow Vista "My Edition"(wm6.1) from with the ring volume-tweak. during call i rised the volume a little bit and then suddenly my speaker stopped working. even a softreset hadnt solved that problem, then i switched often the volume and after MANY attemps i managed somehow to get it working again. i was kinda shocked
greets
guro
PS: somebody has also the problem when recieving messages and press a key to early that the orange flashled doesn't went off?
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
xborfi said:
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
Click to expand...
Click to collapse
Try a different WM6.1 ROM!
i tried lots of stuff to solve this issue...no luck at all, after flushing the stupid Thai rom, i lost the sound....still trying
well, I tried almost 90% of roms here. all wm 6.1 are having this bug . I found PDAviet 4.0.0.0.6 a bit better than other, the sound bug happens less in this rom how ever it is still there.
oh! i found this here!
http://forum.xda-developers.com/showthread.php?t=371926
it looks as if this problem is with all roms, I think there must be a way to fix it on this biggest forum. still searching and reading an trying roms!!
hey guys,
since I moved to wm6 I was getting this bug, specialy with the sms notification.
but there was one rom which I did'nt have this problem if I kept the default rigntones. it was "Prophet_S4V.19701.01_F".
i'm flashing Prophet_S4V.19213.01_C, hoping it is that good too. altough I had the micro based on the s4v.19213 and and it was driving me crazy with this bug, I couldn't make it ring...
looking forward to help.
cya
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
xborfi said:
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
Click to expand...
Click to collapse
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
dioxda2 said:
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
Click to expand...
Click to collapse
yes, i do hard reset by pressing comm + cam + soft > send button . each rom i try i first open key pad and press 30+ on it and i sadly see sound dissapear! it looks as if prophet is not compatible with wm6!
I am now back to the wm5 and eagerly waiting to see a solution or patch from the great developers here!
well. no fix yet pals?
i had some problem too and what I had to do is...
When ever I hold the pda, I will press the volume up button even in lock mode and if there's no any sound, that mean the sound already disappeared, I had to soft reset... I had this problem at least once in 2 days....
Hope there'll be a fix for this issue sooner...
EDIT:
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
That post fixed my problem, as well as fixed the problem which the data connection turns off after a call.
Hey guys, sup?
I have a huge problem with my TELUS Touch Pro. Great phone, but just one problem...
Whenever somebody calls me, I can't answer the phone. The onscreen "Answer" button doesn't work, the Talk button doesn't work, pressing the Select button doesn't work...pressing the headphone button does, but sometimes my headphones are in my pocket, or sometimes they're not with me at all!
The only way I can answer them is by ignoring the call, and calling them back. It sucks big time.
Anybody have a solution? And no, I'm not hard-resetting my phone. It started doing this for my first call, so I'm pretty sure it's not my fault.
HEEAAALLLPPP!!!
Is this the stock ROM?
Do you have BT on and connected?
Mine started doing that yesterday. I did a hard reset and so far everythings back to normal. Still do not know what it was tho
I just had my TP replaced and the new one did the same thing, I did not notice until a few days later as I use a bluetooth headset and pushing the answer key on the headset worked. I had to RTN the device to make it work properly. Have not had a problem since. it has been aabout a week and a half.
Sometimes I've noticed this happens when my memory is tied up elsewhere, ie media player or something. Try soft resetting your phone every morning that might help clear it up.
I have had this happen with me on my Titan which I recently traded in for my Touch Pro, and also on my Touch Pro. I noticed it coincided with installing iGo8 GPS software on both. A hard reset was the only way I found to fix it. Uninstalling the software did not do the trick. I could be wrong about the software title I am blaming, but I have everything reloaded on my phone except that, and all is well. I do have a Slide To Answer incoming call screen now with the MightyRom 4.9.5 rom installed, maybe this is a work around, don't know for sure. If anyone else has more feedback, let me know. I would love to find a fix for it so I can use my GPS software.
Mine started doing this crap last night. I reinstalled the S2A cab and just let it go.
I am starting to think it might just be the telus network being a boatload of suck. Mine does it with the stock rom without any programs loaded from time to time. I am thinking it must be the tower failing to acknowledge that you want to answer the call, so the phone keeps ringing becuase it sees there is an incoming call but the tower ignores that you are trying to answer it. This is just my guess based on what I have read about CDMA, I wonder if any GSM users have the same issue.....
Do any of you have Advanced Configuration installed? This is what caused this problem for mine and my brother's TP. Uninstalling didn't fix it. Had to hard reset.
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
I can tell you that this will more than likely fix this for you. Mine was doing the same thing, applied this, done and shut! Good luck.
OMG OMG OMG thanks!!!! That also fixed the problem where it ended the data connection after the call.
Sorry I took so long, I THOUGHT I was subscribed to the thread...
Thanks again!
i just notticed today that wheni call my voicemail none of the phone onscreen buttons work
keypad,end call, speaker etc are all non functional. i have to press the hardware key to end call.
im using CHT EDITOR with stock TMO rom
could be 2 things related to MinimumTapTime for screen sensitivity:
1. Do you have BSBtweak installed? DO NOT change the MinTapTime setting. Revert it.
2. Did you do tweak#44 MinTapTime from SBOY2000's HD2 tweaks thread? change that value back to what it was.
didnt tweak anything ust used bsb tweaks and changed it back to normal
still same.
at the moment i cant even get to the phone screen
the phone is completely fn cracked out.
im seriously on losing my patience with this sht, 3 phones cant be all having same issues thats just impossible unless the OS is ****.
yesterday i installed the WCX ILLUMINATI SERIES HD2 EURO/TMOUS 21911 2017
rom and it worked fine
call screen worked and keypad as well
i installed the BSB tweaks and cookie tab home
and getting same thing now the whole call screen is inactive
cant even push the hardware end button to end the call
and an error popped out:
a problem has occured with cprog.exe
the phone is very buggy in general with the cookie tab and bsbtweaks
ok so i just tested with both of them setup separately and both of them make my phone screen go stupid.
with bsb tweaks it doesnt turn on at all
with cookie tab it calls but then none of the buttons work on it not even hardware end call...
god damn i hate this phone, less than a week i own it and im about to throw it at the wall.
is anything supposed to work with microsoft at all?
wtf is active about active sync? it takes 50 tries to get one connection
sorry for the language but this is relaly fn frustrating.
fuzzysig said:
didnt tweak anything ust used bsb tweaks and changed it back to normal still same... 3 phones cant be all having same issues
Click to expand...
Click to collapse
fuzzysig said:
i installed the BSB tweaks and cookie tab home ...
and getting same thing now the whole call screen is inactive ...
Click to expand...
Click to collapse
fuzzysig said:
...with bsb tweaks it doesnt turn on at all...
Click to expand...
Click to collapse
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
You returned the phone twice because you keep installing an incompatible program and getting an error????????? Then why do you keep installing that program??????????? You're giving WindowsMobile users a bad name.
*HINT 1:Check what date BSBTWEAK was made. IT IS NOT MADE FOR THE TMO USA HD2! If somehow you feel you must use it, DO NOT FIDDLE WITH THE "TAP TIME" SETTING WITHIN BSBTWEAK.
*HINT 2: DISABLE COokie's Home Tab Lockscreen, it causes more trouble than it's worth.
Quote from the BSBtreak thread:
heybhouse said:
Edwin320 said:
Hello all! ...
I installed BsB onto my phone and it worked fine. I installed it on my wife's phone, and altering the Tap Time resulted in her screen not responding to the icons (speaker phone, hold, etc) while in a call. My phone did not have that problem. I did a hard reset and reinstalled everything except BsB and her phone is now fine ...
Click to expand...
Click to collapse
"in case this helps anyone: one of the tweaks would free my phone when in a call (not the whole phone, just the phone screen) so i couldn't bring up a the keypad or go to speakerphone, etc. I figured out it was the "tap time" tweak. i'm using the usa t-mobile hd2." (pg. 117) haven't seen the menu issue but if you have it backed up might as well save time and do the hard reset. i wonder if chainfire might be the issue there.
Click to expand...
Click to collapse
why doesnt it say anything about beeing incompatible in BSBtweaks post by the author himself?
aaaaaaaaaaaaaaaaaaaaaa back at you...
dude please dont help me anymore you really suck at it
THIS>>>>>>>"DO NOT CHANGE THAT BSBTWEAK SETTING!!!!!!!!"
DOES NOT HAVE SAME MEANING AS
THIS>>> DO NOT INSTALL BSBTWEAK!!!!!!!!!!!!!!!!!!
thats if you didnt understand
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
stlfx said:
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
Click to expand...
Click to collapse
I hope this helps someone else.
The OP doesn't take suggestions well. He just comes on here to vent about how he can't make his phone work.