hey friends help me
I have dopod 818pro with wm5 ipl and spl 2.20
I cannot connect activesync my os is xp
bootloader mode is work fine
need to up grade wm6
thank you
loney_frsu said:
hey friends help me
I have dopod 818pro with wm5 ipl and spl 2.20
I cannot connect activesync my os is xp
bootloader mode is work fine
need to up grade wm6
thank you
Click to expand...
Click to collapse
What had happened to you?
more details please ~~~~~ OR
Read my Post 1 in my signature~~~~
Good luck~~~
Did you try to reinstall AS? It souns like a missing driver.
dioxda2 said:
What had happened to you?
more details please ~~~~~ OR
Read my Post 1 in my signature~~~~
Good luck~~~
Click to expand...
Click to collapse
I can install wm6 shadow successfully
when it restart again goto bootloader screen
Seems like firewall problem to me, as in the start same problem happen to me. I guess ROM has nothing to do at least with the ActiveSyc. or 2nd option could be the driver problem . btw check when you try to connect with the pc, the application activesync is running on you device or not.
loney_frsu said:
I can install wm6 shadow successfully
when it restart again goto bootloader screen
Click to expand...
Click to collapse
did you complete the hardspl flashing?
dioxda2 said:
did you complete the hardspl flashing?
Click to expand...
Click to collapse
I have disable firewall and anti virus program on my lap.but I can't
I can't connect active sync to flash hard spl I have try out ur guide,
my friends xda2 mini is connecting very nicely
it may be hardware problem?
very thank u
Can you enter bootloader (disable connect though USB in activesync) and flash a ROM after plugging the device in?
Have you tried a different USB port?
Does the orange (charging indicator) go on when the device is plugged into the computer?
Does ActiveSync report an error?
Related
Hi i'm newbie
I'm french thus excuse me for my english
I try to upgrade my htc in WM6, i sucess, no problem.
After i upgrade with a rom radio and the upgrade block at 40 %.
Now the phone boot in tricolor mode.
IPL-1.04
SPL-2.10.Olipro
I find in the forum that for unbricked my htc i must to flash any rom in nbh format.
How to do that.
I try to install also original ROM_9600_FRA_10303.exe rom but activsync it not active.
Someone can help me please
thanks
Connect you device in bootloader screen with your PC with USB and you should see USB appear at the bottom of the screen on yor device. Now flash any .nbh with the RUU wrapper and select SPL 2.10 New bootloader and flash the ROM...
what is the RUU Wrapper, where can i download it?
unikgwada said:
what is the RUU Wrapper, where can i download it?
Click to expand...
Click to collapse
Here it is
RUU wrapper is a software?
Explain me which is it
unikgwada said:
RUU wrapper is a software?
Explain me which is it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298737
when i use RUUWrapper i havbe an error [260].
What i can do
In the tri color screen with the device plugged in via USB do you have USB written at the bottom? Does your device appear in the device manager?
Yes USB is written on the bottom, and yes the phone appear in device manager .
What are you using XP or vista?? You could try a different USB port or if that doesn´t work you may have to roll back the driver... read this http://forum.xda-developers.com/showthread.php?t=299657
I'm using XP.
When i use myyt.exe the phone make something, but when i try to upgrade any rom i have always this message error [260]
i try to update with rom radio 1.47.00.10 , the upgrade is correct 100%
but when i reboot i return in tricolor mode
I success to install rom with UUwrapper but now the phone block on the picture windows mobile
Thanks
i fine a the solution
Could you please share the solution ? I've got a similar case, thanks.
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
My Raphael is dead...
1. I flash Hard SPL 1.90.OliNex
2. I flash original Russian ROM and have this message on screen "Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center"
3. I flash stock SPL
and now when I'm trying to flash any ROM or Hard SPL I have on the screen of PC "0% image upgrade in progress" and "0%" on the screen of Raphael
after some time on the screen of PC I see ERROR [262]: UPDATE ERROR
What I must to do?
Help me, please
P.S.
Now when I'm trying to flash HTC_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_R aphael_52.33.25.17_1.02.25.19 I have "Invalid Vendor ID" Message
dishef said:
P.S.
Now when I'm trying to flash HTC_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_R aphael_52.33.25.17_1.02.25.19 I have "Invalid Vendor ID" Message
Click to expand...
Click to collapse
When you receive "Invalid Vendor ID", than your device is not Hard SPL! Please follow the update procedure again. There must have been something wrong.
DeepThought said:
When you receive "Invalid Vendor ID", than your device is not Hard SPL! Please follow the update procedure again. There must have been something wrong.
Click to expand...
Click to collapse
But when I'm trying to flash Hard SPL I have ERROR[262]
Does any method to flash Hard SPL from SD card exist?
dishef said:
But when I'm trying to flash Hard SPL I have ERROR[262]
Click to expand...
Click to collapse
Read here please http://forum.xda-developers.com/showthread.php?t=425922
taiseer999 said:
Read here please http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
sorry for the offtopic (or not...)
i have tryied many times to connect to my TP using mtty, but no luck. i'm using Vista Ultimate, and can connect and use mtty with my Kaiser, but can't with Raphael.
Is there any special thing i need to do to get mtty working with raphael?
Thanks in advance
Cheers
jcespi2005 said:
sorry for the offtopic (or not...)
i have tryied many times to connect to my TP using mtty, but no luck. i'm using Vista Ultimate, and can connect and use mtty with my Kaiser, but can't with Raphael.
Is there any special thing i need to do to get mtty working with raphael?
Thanks in advance
Cheers
Click to expand...
Click to collapse
Have you remembered to disable USB connections from activesync connection settings?
taiseer999 said:
Read here please http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i used the MTTY to format the device
but still have ERROR[262] when trying to flash Hard SPL
using info 2 on MTTY i got "HTCSHTC__J15Wаа`HTCE"
but I have HTC Raphael (Touch Pro)
does any way to flash hard spl with MTTY exist?
or may be I can flash ROM with MTTY?
i have this problem whit hard spl
i test it whitout sim-micro sd-win xp-win vista-i dont use usb hub
i use ssple but i had 262 error again and pc was hang on 0%
i have touch pro
i dont want MTTY
it's risk
maby my phon is going to be off for ever
This procedure can damage your phone
help me please bro,, i want hacked my htc hd 2 and first i flash with hspl in this
and susscessed,,
and next my step is flashing stock room and i download in this
Code:
4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
i download stock rom LEO 2.10 next my htc hd2 updating sudenly htc hd2 restart before finished update the screen after restart is triangle look like this pic
and i tried another stock rom but the screen like this
and im waiting but the loading never finished
this my tricolor
SPL 2.08 before i flash stock rom my spl 1.42
anything idea how to fix my htc hd2 problem ???
thanks for your help
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
ClydeB1 said:
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
Click to expand...
Click to collapse
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
thats correct
you must go into bootloader mode, start the the tool and then u can install it(push and hold volume down+turn on the phone)
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
ok i'll try bro thanks again for ur help...u have yahoo id bro?
****thefuckerz said:
ok i'll try bro thanks again for ur help...u have yahoo id bro?
Click to expand...
Click to collapse
Pleasure m8. No I don't. You can PM me though if you have more questions.
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
****thefuckerz said:
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
Click to expand...
Click to collapse
Load spl 2.08.hspl by running the hspl2 tool. Once that is successful (check in bootloader again to see that it has successfully installed) then you can flash to the rom of your choice.
hi pls help
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
loonyozzy said:
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
Click to expand...
Click to collapse
Enter bootloader and supply all of the info you see there.
Actually you can't do much wrong. just connect the to your pc and then use the brilliant hspl2 to hack your spl on the phone, and then you can reflash the rom....
I have had same symptoms, tried everything... then....
Finally I have noticed that I can't flash through USB because on my micro-sd card I have placed LEOIMG.nbh which caused HSPL error 0028002
Before you flash remove micro-sd.
I hope my experience will help.
SAME problem no resolution
HI I have same problem Screen with exclamation mark then boot screen with gour colours showing this
HX-BC
SPL-1.42.0000 XE.
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So I've tried to install HSPL 1.42 With no card inside but during installation i get.
Download http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
1. Remove micro SD card.
2. Reboot phone while holding volume down.
3. Connect to the PC via USB.
4. Run HSPL2_RUN.exe and follow the steps on your screen
Same problem
Hi, I have also this problem. I tried to install the stock rom but during it an error occured and it stopped before finished. Then there is the triangle and "software update failed". My spl says that I have the version 3. and something and also when I try to run the hspl.exe an error occurs that says that a file RAPi.dll cannot be found and then it waits for usb connection and finaly an error occurs "cannot connect".
Please could someone help me ? WHat am I doing wrong ? Or what should I do ?
thanks
Hi, sorry for capitalized title...
I searched and tested for weeks for a solution in this helpful and very professional forum... but I still haven't found a trick for my problem:
I have a NIKI100 - 20key that ActiveSync doesn't recognize (usb port still charge in Windows environment but no data transmission seems to work).
I tried many PCs with many OS, and now I can say that THIS IS NOT A SOFTWARE PROBLEM (or not?).
So i tried SD flashing, and it works only with signed ROM, so I can't flash WM 6.5
Because of USB issue, I can't flash HardSPL.
MTTY doesn't find the NIKI on COM or USB port.
The question is:
Is there a way to flash HardSPL via SD or is there a signed ROM with WM 6.5??
THANKS A LOT IN ADVANCE!!!
ROM: 2.16.831.3
Radio: 1.65.29.22
NIKI100
SPL-1.22.0000
CPLD-4
Marshalll said:
Hi, sorry for capitalized title...
I searched and tested for weeks for a solution in this helpful and very professional forum... but I still haven't found a trick for my problem:
I have a NIKI100 - 20key that ActiveSync doesn't recognize (usb port still charge in Windows environment but no data transmission seems to work).
I tried many PCs with many OS, and now I can say that THIS IS NOT A SOFTWARE PROBLEM (or not?).
So i tried SD flashing, and it works only with signed ROM, so I can't flash WM 6.5
Because of USB issue, I can't flash HardSPL.
MTTY doesn't find the NIKI on COM or USB port.
The question is:
Is there a way to flash HardSPL via SD or is there a signed ROM with WM 6.5??
THANKS A LOT IN ADVANCE!!!
ROM: 2.16.831.3
Radio: 1.65.29.22
NIKI100
SPL-1.22.0000
CPLD-4
Click to expand...
Click to collapse
Can you tell me what happens when you connect your device with your computer, when it is already in bootloadermode.
You can turn the phone in bootloadermode to turn your device off and press then on/off button and camera button on the same time, and keep them pressed until bootloader appears.
If I'm correct you will see Serial in the white block, just let me know what you see in the white block when you connect the phone with the computer, if I'm correct Serial will change in Usb, if not just let me know.
Greetz,
Tnx for reply...
I see USB when I connect the cable, Serial when I disconnect the cable.
I'm searching for a SD-card-method for flashing HardSPL: is this a good idea or I'm just wondering ?
Marshalll said:
Tnx for reply...
I see USB when I connect the cable, Serial when I disconnect the cable.
I'm searching for a SD-card-method for flashing HardSPL: is this a good idea or I'm just wondering ?
Click to expand...
Click to collapse
Ok, can you tell me if you're device has a simlock ?
Greetz,
Hi.
No simlock.
Tnx.
Marshalll said:
Hi.
No simlock.
Tnx.
Click to expand...
Click to collapse
Ok thanks, I'll do some searching and see if we can fix it.
Regards,
Ok, if I where in your situation I should try it this way, just be aware that I can not test it because I don't have such a problem, and you can brick your device if it went wrong.
1. Copy sspl-1.16-nike.exe to your sd-card
2. Copy sspl-1.16-nike.exe from your sd-card to your device
3. Turn phone off and remove sim and sd-card
4. Turn phone on and connect device to your computer
5. Run sspl-1.16-nike.exe on your phone
6. Wait until usb appears in your device
7. Unplug and replug the usb cable
8. Now flash the HardSPL 1.22
If you can run the HardSPL you should be able to flash a wm 6.5 rom.
Rataplan said:
Ok, if I where in your situation I should try it this way, just be aware that I can not test it because I don't have such a problem, and you can brick your device if it went wrong.
1. Copy sspl-1.16-nike.exe to your sd-card
2. Copy sspl-1.16-nike.exe from your sd-card to your device
3. Turn phone off and remove sim and sd-card
4. Turn phone on and connect device to your computer
5. Run sspl-1.16-nike.exe on your phone
6. Wait until usb appears in your device
7. Unplug and replug the usb cable
8. Now flash the HardSPL 1.22
If you can run the HardSPL you should be able to flash a wm 6.5 rom.
Click to expand...
Click to collapse
All right from 1. to 7. but when I run flashin it shows error code 260 (unable to connect).
Is there a way to run SPL "JUMP" and then flash HardSPL via SD card? I think it's the only way to flash HardSPL
Rataplan is the expert one on this area,
but wath is your operating system? Seven or XP?
Because i just was able to hardspl on XP, all other things I was able to do on Seven.
Marshalll said:
All right from 1. to 7. but when I run flashin it shows error code 260 (unable to connect).
Is there a way to run SPL "JUMP" and then flash HardSPL via SD card? I think it's the only way to flash HardSPL
Click to expand...
Click to collapse
Did you try to run the HardSPL 1.22 from the bootloader ?
Let me explain a little bit better, did you connect your device with your computer when your device is in bootloadermode and then run the HardSPL 1.22
If this fails, you can rename your nbh-file, hardspl-1.22-nike-shipped.nbh into nikeimg.nbh, copy nikeimg.nbh into the root of your sd-card and turn your device on while pressing the on/off button and the camerabutton on the same time and follow the instructions on the screen.
Succes,
Rataplan said:
Did you try to run the HardSPL 1.22 from the bootloader ?
Let me explain a little bit better, did you connect your device with your computer when your device is in bootloadermode and then run the HardSPL 1.22
If this fails, you can rename your nbh-file, hardspl-1.22-nike-shipped.nbh into nikeimg.nbh, copy nikeimg.nbh into the root of your sd-card and turn your device on while pressing the on/off button and the camerabutton on the same time and follow the instructions on the screen.
Succes,
Click to expand...
Click to collapse
Yes, I tried all of this method...The PC can't recognize the niki in bootloader mode.
When I put HardSPL on a tested sd-card (renamed NIKEIMG.nbh), I'm stuck in white screen with "Loading...".
I found some method for flashing HardSPL via sd-card (for Kaiser: http://forum.xda-developers.com/showthread.php?t=433835):
is there a SSPL Jump for Niki that run from sd (as with Kaiser sd-method)?
BTW, I think this is the right way... I'm trying and searching!
For Openview:
I tried with many PCs with XP Pro and 7. The niki usb port seems to be broken (only charges, but no data connection).
Nothing seems to work. If anyone has somethig for flash SSPL and HardSPL from SD, please post!!!
Any other ideas???
I think we tried everything but unfortunally the answer is that it isn't possible to flash the hardspl via sd, the only person you can ask is cmonex, she is the only one who can set this straight.
Here is her User cp but she is a very busy lady.
If you fix it, plse post it in this thread it can help others.
Goodluck buddy
Ok I'll try to contact mrs. cmonex. Of course, I'll post any solution (hope to find one... ).
Tnx for all!
SOLVED!
I solved the issue!! It was only a hardware problem with HTC ExtUSB port!!!
I cleared the pin and resoldered the port on motherboard. Then I flashed HardSPL via standard method and now I can flash anything form sd-card!!
Thanks to all.
Mr. Rataplan, now we can close this post!
Thanks!!
Great Marshalll, I'll ask Electroz to close this thread.