Related
So I recently downloaded the "RUU_Hermes_CINGULAR_WWE_2_1_[1].15.502.3_6275_1.40.30.00_108_Ship" ROM for my 8525, in hopes that it will provide me with a more stable pda/phone enviroment so that I may do the work I need to without having to hard reset every other day or so.
When I try to run the ROM install, I follow all the insturctions but when the update starts to run, it shuts my activesync connection off so the update can't run and throws back an error that it lost connection with the device.
Any Help Here? Thanks
PS: I love the idea of being able to use my 8525 for all my work and play needs, but if this update doesn't help make the device more stable, I will have to sell it for something that doesn't crash this much.
hey..iv got same problem.. i think it maybe cause we are using windows vista (thats the only information i can find about it).. i wanted to update ma rom aswell
I'm using XP Pro.
try running it on another system...if available...
anyone know the solution to this?!
OK, have you installed HardSPL ??
Check my SAFE WM5 upgrade guide, if you follow the procedures in there you should be fine.
Yeah, as far as stability goes most the wm5 roms out of the box aren't going to be the best. with any rom i use sktools to tune it up for performance/stability settings. It does this automatically so you don't have to find various registry keys. So don't think just because you are going to another rom everything will be okay.
Read the wiki, search the threads, you will find answers to all your problems.
As far as you not being able to connect what is your spl number? Also, have you tried hard reseting then connecting or trying another computer. I had the same problem when downgrading a black 2.5 with hard spl 2.1 ( i had to downgrade to send it back to cingular). I ended up just downgrading to the highest version of cingular rom which is branded AT&T. It looked like a pretty good rom but I did not play with it.
he does not need hardSPL(at least i dont think so) he is just runnning an update for another cingular ROM, its still the same CID...try running it on another system, i had this same problem and it worked on another system....
Malik05 said:
he does not need hardSPL(at least i dont think so) he is just runnning an update for another cingular ROM, its still the same CID...try running it on another system, i had this same problem and it worked on another system....
Click to expand...
Click to collapse
HardSPL will protect him against a faulty SPL flash if it occurs, a newer SPL is likely to be in the ROM update aswell as a newer radio possibly. Having the same CID doesnt matter because if the radio or SPL flashing procedure messes up it can create a bricked device VERY easily (corrupt SPL or even a corrupted CID/Radio BL). Besides if he already has HardSPL that would explain why the RUU doesnt reconnect when the device is in bootloader mode.
mrvanx said:
HardSPL will protect him against a faulty SPL flash if it occurs, a newer SPL is likely to be in the ROM update aswell as a newer radio possibly. Having the same CID doesnt matter because if the radio or SPL flashing procedure messes up it can create a bricked device VERY easily (corrupt SPL or even a corrupted CID/Radio BL). Besides if he already has HardSPL that would explain why the RUU doesnt reconnect when the device is in bootloader mode.
Click to expand...
Click to collapse
point well taken...=)
you mention, since he has already gotten HardSPL, why would that mean his device doesnt reconnect in bootloader?
put it in bootloader first and then run the update...
make sure you disable usb connections with active sync put your phone in bootloader and run the update might as well go with WM6 its a lot more stable than any WM5 rom i have played with .
OS crash
I run ROM install then computer shuts itself now my 8525 show hi true color with red/blue/white i tried to hard reset to solve but till hi true color what should i do?
trgrapsonu said:
I run ROM install then computer shuts itself now my 8525 show hi true color with red/blue/white i tried to hard reset to solve but till hi true color what should i do?
Click to expand...
Click to collapse
I've run there updates on my 8525. If the computer is shutting itself down, try another computer. This sounds odd. More of a computer problem then a Tytn Problem.
Malik05 said:
try running it on another system...if available...
Click to expand...
Click to collapse
=) have you even tried it?
I'm having a problem connecting ActiveSync over USB. When I first got the phone I was able to use that connection. Then I set up BT ActiveSync. I believe at the time I could use either USB or BT, but it has been a while. BT sync was so much more convenient for me that I haven't used my USB connection except for charging the phone.
Today I tried to get set up to upgrade the ROM, but ActiveSync doesn't seem to work over USB anymore. I turned off BT on the phone. When I plug it into my laptop's USB port the laptop makes a sound indicating it sees the connection. It makes a different sound when I unplug it. I also see the orange charge light come on on the phone. I usually charge the phone this way when I am on the road since I don't carry the wall charger with me.
I think at one point I installed a river that I fdound here to access the phone in bootloader moder. Other than veryfying the phone connected this way, I never did anything with the driver. IT has been so long that I don't remember the details. Could that be affecting the connection for ActiveSync?
I have made sure my firewall is inactive. In Windows XP Device Manager I see an HTC USB Sync device under Windows CE devices. Would it be safe to remove that device?
Any ideas how I can get USB ActiveSync to work again?
Is it totally crazy to try the ROM upgrade over the BT connection?
emuyshondt said:
I'm having a problem connecting ActiveSync over USB. When I first got the phone I was able to use that connection. Then I set up BT ActiveSync. I believe at the time I could use either USB or BT, but it has been a while. BT sync was so much more convenient for me that I haven't used my USB connection except for charging the phone.
Today I tried to get set up to upgrade the ROM, but ActiveSync doesn't seem to work over USB anymore. I turned off BT on the phone. When I plug it into my laptop's USB port the laptop makes a sound indicating it sees the connection. It makes a different sound when I unplug it. I also see the orange charge light come on on the phone. I usually charge the phone this way when I am on the road since I don't carry the wall charger with me.
I think at one point I installed a river that I fdound here to access the phone in bootloader moder. Other than veryfying the phone connected this way, I never did anything with the driver. IT has been so long that I don't remember the details. Could that be affecting the connection for ActiveSync?
I have made sure my firewall is inactive. In Windows XP Device Manager I see an HTC USB Sync device under Windows CE devices. Would it be safe to remove that device?
Any ideas how I can get USB ActiveSync to work again?
Is it totally crazy to try the ROM upgrade over the BT connection?
Click to expand...
Click to collapse
have you tried changing the setting on your phone "USB to PC"? I would try this first before digging to deep
slavetolustnyc said:
So I recently downloaded the "RUU_Hermes_CINGULAR_WWE_2_1_[1].15.502.3_6275_1.40.30.00_108_Ship" ROM for my 8525, in hopes that it will provide me with a more stable . . . When I try to run the ROM install, I follow all the insturctions but when the update starts to run, it shuts my activesync connection off so . . .
Click to expand...
Click to collapse
You may want to try using the Hard SPL v7 and then install your ROM. I did that and all went smooth as silk - six times now. I have been browsing ROMs to see which one suited my needs an personality, and it has been fun. You can find that on my FTP site at ftp://xda:[email protected]/xda_dlz/
This is a dynamic IP Address from a cable modem so two things are true
1. It is subject to change at any time.
2. It is not as fast as some of these speedy servers
But, I do know where it is.
shogunmark said:
have you tried changing the setting on your phone "USB to PC"? I would try this first before digging to deep
Click to expand...
Click to collapse
I had tried this yesterday and checked the Enable advanced network functionality box. Today I unchecked it and suddenly the PC saw a new USB device (HTC Sync USB, I think). It still wouldn't sync automatically so I manually executed /windows/repllog.exe. This time it connected.
Some observations:
- After the connection was established the the name of my 8525 was changed to something different (something like WM_ComputerName1, Where ComputerName is my computer's host name). I changed the name back and was able to re-invoke repllog.exe and sync with the old name.
- If I disconnect the USB cable from the phone and plug it in again ActiveSync doesn't connect until I manually run repllog.exe. It does work when I run the exe on the phone manually.
I went ahead and started the upgrade process after connecting by running repllog.
Executing the RUU file from the HTC site first put SPL 1.11 on the phone and left the phone in bootloader mode (with the tricolor screen). I left the phone with bootloader screen and followed the instructions (although by now ActiveSync had shut down so the part about the AS connection that the installer asked for was not true). The progress bars appeared on both the phone and the PC. It took a few minutes to complete, but the update was successful.
After the upgrade I was able to sync over USB without any problems. I am now syncing my contact from Lotus Notes and setting things up to my liking. Once I got over the USB connection problem everything worked fine!
im a tech for a sprint affiliate store and i have a customers mogul that she got into bootloader...normally what i would do in this situation is disable usb connection in AS...plug in the phone...wait for the drivers to install and use UNI_ExitBootloader.exe to get it out of bootloader...
but for some reason with this phone when i plug it up via usb...it still says serial, instead of switching to USB at the bottom and the program nor the computer can read the device
i have a test mogul here...and when i put it into bootloader...it says(rom 3.45 offical sprint windows 6.1)
"TITA100
SPL-2.07.0000
CPLD-9"
and it unlocks fine
the mogul that wont get out of bootloader says(rom 3.35 official sprint)
"TITA100
SPL-1.04.0000"
and thats it...
im stumped...
Run titan_exitbl instead of UNI. A quick forum search and you'll find it. See if that works for you.
ive tried that as well...the problem is when i connect the phone to the computer its supposed to go from serial mode to usb mode...and it doesnt...so the computer doesnt download the drivers and hence wont connect using either program...
ive scoured many forums for hours and have not been able to find a solution or even a description of my particular problem...
thank you for the suggestion but being im not a noob this doesnt seem like your regular search and find your answer type of problem
justincredible said:
ive tried that as well...the problem is when i connect the phone to the computer its supposed to go from serial mode to usb mode...and it doesnt...so the computer doesnt download the drivers and hence wont connect using either program...
ive scoured many forums for hours and have not been able to find a solution or even a description of my particular problem...
thank you for the suggestion but being im not a noob this doesnt seem like your regular search and find your answer type of problem
Click to expand...
Click to collapse
Run MTTY to exit BL.....
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
BTW the 2.07 is the re-locker from NO2chem....
and no dice on that solution as well...just reads com1 and com2 under ports where you are supposed to be able to select USB
This is kind of a stupid question to ask....but did you try enabling usb connections in activesync and connecting it?
yes i did...wouldnt connect...but it will connect on my broke mogul and the working mogul i own...
which bugs me because i still dont think its a physical issue(like a broken USB port) because the customer was having problems sending SMS called tech support and they tried some stuff with her over the phone and she got stuck in bootloader...
im assuming this is a lost cause...but i try to repair as many phones as i can instead of just tossing people reconditioned ones...even though my store technically isnt a repair center...
thanx again for everyones suggestions...
and if anyone else has a clue wtf is going on lol...
please feel free to let me know
Flash from SD?
Since it is possibly dead anyway, how about try flashing from SD card as it will exit bootloader and reboot as its last ac ??? Can not hurt any worse;-)
so i need to take the installer file...get the RUU_signed.nbh file extracted from the ROM...rename it to TITAIMG.nbh...format the SD card to fat32...pop that baby in and see what happens?
thanx for that suggestion i totally forgot about that...
well good idea but still no dice...
i installed th ROM via SD card...it worked!...
fixed the SPl and CPLD errors fixed...so i know the ROM got loaded correctly...
the test mogul and the broken one look exactly the same in bootloader...yet i STILL cant get my comp to see the device...its still stuck in serial mode and wont switch to USB mode and i cant get it out of bootloader
edit:
wait...i turned the phone off...plugged it up via usb...turned the phone on and the damn thing worked!
phone booted right up...which is weird because i turned it off and turned it back on after i reinstalled the ROM from the SD card...
thank you guys for all your help...
you just really educated about 30+ TSRs from sprint affiliate stores in illinois, indiana, michigan, iowa etc etc
What does it say in bootloader exactly??? List everything on the screen.... sounds like if it works with the phone plugged in via USB, that you have the wrong bootloader on it.... Does it boot up without being plugged in??
well looks like i gave out the props a lil too soon lol...
im back to square one...installed ROM from SD card...took battery off...put it back in...turned phone on....if its plugged up via USB it'll boot up...add the extra sprint crap on it...as soon i unplug it and restart it goes right back to bootloader...and my comp wont see it as a USB device yet and still it'll see 2 other moguls i have chillen around my house
TITA100
SPL-2.07.0000
CPLD-9
is what it says...
omg this is nuts lol
if i leave the mogul unplugged from the USB cable after reinstalling the ROM from the SD card it just goes right back to bootloader...
it wont take a charge...nix that it took 5 minutes b4 it would accept a charge...
theres definately something wrong with the USB port...has to be...
It sounds like you fixed the software issues but I agree there has to be something up with the USB
the thing that puzzles me is that the usb port doesnt appear to be damaged at all...its still attached to the board...none of the pins are bent or broken...theres no water damage...
im baffled
justincredible said:
well looks like i gave out the props a lil too soon lol...
im back to square one...installed ROM from SD card...took battery off...put it back in...turned phone on....if its plugged up via USB it'll boot up...add the extra sprint crap on it...as soon i unplug it and restart it goes right back to bootloader...and my comp wont see it as a USB device yet and still it'll see 2 other moguls i have chillen around my house
TITA100
SPL-2.07.0000
CPLD-9
is what it says...
Click to expand...
Click to collapse
1st, get some compressed air and blow out the USB port, and get a different cable.... try connecting it now - hopefully something was causing a bad connection....
In bootloader screen does it change from serial to USB on the phone screen when you plug it in?? If it does you can get the official Sprint update and run it while the phone is in bootloader, it should finish just fine..... try this and report back....
i tried compressed air...didnt change anything...the phone will charge but wont switch from serial to usb...its not the cable because i have a my working mogul and a test mogul here and both worked perfectly...
the phone will boot up and work if its usb port is in use(charging, syncing) but as soon as i disconnect the cable and restart for any reason it goes right back to bootloader...and it will not boot up at all if the usb port isnt in use...
like i said...this is easily the most retarded seemingly unfixable mogul break down ive ever seen...
its very interesting in a werid kinda dorky way...this mogul is impervious to traditional bootloader fixes lol
So try this, copy NueSPL to the SD card, and then boot the phone and copy it to the phone. Then run the nuespl so it upgrades the spl to nuespl 2.47. You already have the the 3.56 ROM and the 3.42 radio on it right???
Heres the link to nuespl nueSPL-2.47.rar
what radio version is installed?
reading your first post, SPL 1.x should not have been on the broken phone. I wonder if it failed during the 3.X ROM update. Maybe she tripped over the USB cable while flashing.. I've done it.
az ill go ahead and try that when i get the phone back...she didnt feel like waiting another day and i could def understand that...so when the exchange is done im going to bring it back home and play mogul dr...
and dcd she hasnt updated her ROM at all...it was the stock 3.35 rom that came preinstalled when she got it...and no diss to her but i know her and shes not that technically inclined...but ill note the radio and get back to you...
this is an issue resolution that could help a lot of people...
i appreciate all you guy's help and suggestions...
Hi,
I have had my 8125 for about 2 1/2 years now, love it!. Just the other day, it started locking up and giving me the white screen of death.
I tried to flash it with a rom, and it got to 99% and then lost connection. Tried to do the recovery, but that failed too.
I have found alot of good information from the smart and wonderful people on this forum and tried a bunch of stuff.. but I am now stuck.
Now, I can always boot into the bootloader, and it says USB over the left softkey, but no apps can connect to the phone.
I tried to use other RUU roms, HardSPL, SoftSPL, etc...I tried to unlock my CID using the thread in this forum, but SoftSPL couldnt connect to the phone via USB.
All apps error with "error unable to connect to device."
I have read the forum about having a bad mimi-USB port, but I dont think thats my case.
Please help! I am pretty close
Dell D620 CoreDuo 1.8Ghz; WinXP SP2
ActiveSync 4.5
IPL 2.25.0001
SPL 2.25.0001
end123 said:
Hi,
I have had my 8125 for about 2 1/2 years now, love it!. Just the other day, it started locking up and giving me the white screen of death.
I tried to flash it with a rom, and it got to 99% and then lost connection. Tried to do the recovery, but that failed too.
I have found alot of good information from the smart and wonderful people on this forum and tried a bunch of stuff.. but I am now stuck.
Now, I can always boot into the bootloader, and it says USB over the left softkey, but no apps can connect to the phone.
I tried to use other RUU roms, HardSPL, SoftSPL, etc...I tried to unlock my CID using the thread in this forum, but SoftSPL couldnt connect to the phone via USB.
All apps error with "error unable to connect to device."
I have read the forum about having a bad mimi-USB port, but I dont think thats my case.
Please help! I am pretty close
Dell D620 CoreDuo 1.8Ghz; WinXP SP2
ActiveSync 4.5
IPL 2.25.0001
SPL 2.25.0001
Click to expand...
Click to collapse
Ok,first,no other custom build rom will flash on it,except official stock rom of the carrieror,however, you can try wizard_love rom,as it has patched IPL/SPL (Bootloaders),so don't try to flash any other custom build,as its a G4,custom rom can only be flashed through SoftSPL or HardSPL.
Download official carrier's stock rom and wizard_love rom.
Secondly,
1.Disable activesync or rather uninstal it altogether,as its not needed during flashing a rom.
2.End process 'wcescomm.exe' in the 'windows Task Manager.
3.Clear and delete the 'Temp Folder' files
4.Run 'Disk Cleaner'
5.Disable all Anti Virus and Firewall.
6.Try to stop/disable all running programs in the background via 'Task Manager'
7. Get the battery fully charged,as many comm errors are due to weak or discharged battery.
After doing all this,get the phone in Bootloaders before connecting with pc via usb cable,there shudn't be any usb at the bottom of the Bootloaders,now connect with pc and check if usb appears at the bottom,if its there than,its establishing connection,go ahead and run official stock or wizard_love rom.Don't use the pc or play games or check emails,don't even do any word,excell or any office application.Check if any application/program interferes with the flash,either disable or remove that program.
Does the battery get charged through usb cable ? verify it.
If after getting the phone into bootloaders and connecting through usb cable,small usb doesn't appear,it means there's a connectivity problem,replace the usb cable and verify it again.Even try with another pc with winXP or change the usb input port of the pc ,put the usb cable in some other usb port on the pc.
Apart from all these,I don't find any reason for not getting the flash completed
Hi,
Thanks for the help.. I tried the wizzard_love rom, and then went to the NBD_v8.3 /w TouchFlo rom and thats awesome!
my biggest issue was not able to connect to the device although it looked like it should have.
on another thread someone said to leave the battery out for 5 mins. I did that and all of a sudden it started to connect consistantly.
After that I did the HardSPL and started flashing and all is well..
Thanks for your help!!!!
wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
i followed it very precise after reading evrything through twice..... and when i run " Easy Hard-Spl v7 beta v0.1" it says: "ERROR[260]:Connection. the update utility cannot connect to your PDA phone. please check that your usb cradle/cable is connected properly between the PC and your PDA phone. check the following, 1that the PC is connected to the PDA phone, 2 that the PDA phone is connected to the pc".... and it is... so what have i done wrong?
260
make sure you dont have the sim card in i have gotten that error from that also you may want to try and flash a stock rom first if you cant find it heer go to either your carriers web site or HTC their sight has many stock roms. ive been doing this a few years now but i am no where as good as most of the ppl here. good luck
didn't work, and now i tryed to do that pc sync as well ono doesn't work
do u have active sync or windows devive center on your computer ? have you been able to connect and view files on the phone through your computer using any of these programs? if so have you gone to htc and tried to flash the stock rom? you must remove sim card and memory card. next do a hard reset use the stylist and stick it into the tiny hole just to the right and slightly above the usb port then follow the instructions on the screen. after that connect the phone to the computer and link to active sync. then reinstall the stock rom. let me know how that works after that you should b able to flash hard spl then download it and just open it on computer it will install on the phone by itself dont load on memory card or phone memory directly let it do it through the computer.good luck let me know how you make out good luck
ps i know it may sound silly to reinstall origonal rom but sometimes there can be a corrupted file preventing you from upgrading, and its good practice lol
Does your phone can run the windows?
I mean does your pphone boots correctly?
or it is in the tricolor screen?
if it works, why you are trying the that new HSPL?
use the olipro version V7
be sure your PC has netframeworks 3.5, your phone dont has the storage card, have enough battery, good usb cable, and Windows XP.
if your device cant boots and its in tricolor screen... please search in the wiki to your country Stock rom and falsh it.. once it boots... apply the HSPL
+ Que PPC...
as you are the master of the hermes maybe you can help me i have a herm 100 that wont get past the screen align on any rom. you tap the X in the corners then it comes right back. i think it may be the radio but i cannot find anything that will work and stock rom doesn't go past 11% on install. spl 1.40. olipro ipl-1.01 m 05 s 04 B o6 . it does connect to active sync and i can open all the folders in it. all the links to radios are dead and i think i have to down grade spl first to install radio but i cant find that. anny help would be great. ive flashed the hell out of my fuse kaiser and pure and no problems but i rely liked this old phone and want to bring it back to life
hey all,
ive been a member for a while, but have never posted. i usually am always reading and trying to keep up with updates, and how to's... i am currently running liberated Aria FROO8 (2.6.32.17-cyanogen-Liberty), and have been for some time. i am nervous usually when it comes to rom updates, so i dont update constantly (if anyone has a great rom i should update to, please dont hesitate to shout it out). the problem was when i decided to update to Clockworkmod recovery 3.2 from here:
http://forum.xda-developers.com/show....php?t=1003723
now, my computer does not recognize my phone, and will only charge the phone. i have tried to reinstall unrevoked, but when i go through the steps, my device manager or registers it as My Htc, and i cannot update using the drivers i downloaded. it seems that its the computer not accepting the phone and not the phone restricting anything. please, please, can someone help, i need to be able to access my phone on my computer, and i have read all 33 pages of the forum thread i linked above. what do i need to do? is there a way to uninstall the recovery 3.2? if i were to upgrade to a new ROM, would the computer still not recognize the computer. i realize as well, after the fact, that i installed the recovery meant for the Desire.
how can i get my computer to recognize this Aria without having to reboot everything and try to start from scratch, does anyone know if i need to reinstall CWM and which one would work for me. when i plugged my phone after install, its states that device driver not installed correctly. then when i run through the instructions loacated here:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
and here:
http://www.unrevoked.com/rootwiki/doku.php?id=public:windows_hboot_driver_install
and neither load a correct driver onto my computer, my computer does not register it as Other Device/Android 1.0, it registers it as My Htc.
any help would be greatly appreciated.
thanks
sullylove
i would say use the 2.1 (NOT 2.2) RUU update to return to stock and re-run unrevoked
1st link 404s(page not found)
is there also a way to delete the CWM 3.2 i installed on the computer, i cant seem to find it anywhere, where would it be. thanks for the quick reply, there was no link though to the 2.1.
i dont understand how a newer version of CWM was installed without s-off
how did you flash it?
Try turning your phone completely off, then using volume down + power to turn it on, and then select FASTBOOT from the HBOOT menu. Leave your phone on this screen.
Then run the 2.1 RUU. You can download it from here:
http://www.megaupload.com/?d=9D9NGT6J
You are going to lose your ROM settings when you do this because this reverts your phone to stock. Then you can run Unrevoked again.
drumist said:
Try turning your phone completely off, then using volume down + power to turn it on, and then select FASTBOOT from the HBOOT menu. Leave your phone on this screen.
Then run the 2.1 RUU. You can download it from here:
http://www.megaupload.com/?d=9D9NGT6J
You are going to lose your ROM settings when you do this because this reverts your phone to stock. Then you can run Unrevoked again.
Click to expand...
Click to collapse
thanks a million! i noticed that when i fastbooted, that the computer registered a usb plug, but that was the only time it ever did, thats why i figured the problem was on the computer side, when i tried to install the 3.2 CWM for the Desire.
i followed the instructions on the page to update the CWM to 3.2. Like a moron, i skipped turning the S-Off. so when i installed it through fastboot, like it said, the phone rebooted, but the computer could not identify the phone, and so that left me with a phone that couldnt load into the computer. i also noticed, when i tried to run Clockwork Recovery through Ubuntu, i couldnt find that either. does anyone have the link to loading through Ubuntu?
two questions...does have a ROM that you recommend, the one i had seemed to work great for me, even though its a 2.2. but i cant seem to find a link for it. does anyone know where i can find it, or one better? i loved what i was using but now not sure which to choose, since soo many have been released since i originally downloaded it. thanks again for everyones help.
sullylove
the problem was with my phone and not my computer...i should have known. when i loaded 3.2 i figured that it had to be the computer since i loaded 3.2 through the computer. stupid me. normally im pretty cautious about just downloading, but i noticed that my clockworkmod had never updated from 2.5.0.7 and i saw that there were alot of them. but ill tell ya i loved the ROM I was using. just cant find it.
liberated Aria FROO8 (2.6.32.17-cyanogen-Liberty)
if anyone has a link to it, or one better, or that i should be using please let me know.
much thanks!
sullylove
For future reference, just leave your recovery version alone. Versions 3.0 and higher are actually not compatible with FR008, which doesn't sound like something you want, does it?
The ROM you've been using (FR008) is available here: http://forum.xda-developers.com/showthread.php?t=819715
There is also another somewhat newer version of Sense Froyo that is based off the the official AT&T 2.2.2 release (whereas FR008 is based on the global 2.2.0 release). The differences are minor but you can try it out and see what you think: http://forum.xda-developers.com/showthread.php?t=970272 (Skip all the way down to the bottom of the first post for the most recent version.)
no that does not...thanks for everything! i am clearly a novice, and should be more careful. and thanks for letting me know of the Sense 2.2.2. i think i might give that a shot. that seems to be a much smarter risk than just downloading an update i cant use, only to satisfy my hunger to update something. thanks again. to everyone
sullylove
so i went ahead and tried to run the factory fastboot in Hboot but the computer never recognized that anything was plugged into the usb port. My phone only charges now when plugged into the computer, even in Hboot. Hboot recognizes that the usb is plugged in, but my computer does not recognize anything, so i was unable to reset it to factory Rom, nor use the Ubuntu unrevoked, and when i tried to install the US att 2.2.2 ROM, it installed, but still the computer did not recognize any phone. am i screwed?
How do i turn off the Eng S-On in Hboot? and is there a way to find where the CWM 3.2 installed into to get it off my computer, because it seems the computer wont let the phone be recognized? When Hboot loads i receive the screen first picture that i loaded, then it goes to the HBoot menu screen, then when i plug in the usb, it changes to Hboot Usb, then i choose Fastboot which is the next screen, the final screens are what my computer registers the phone, and what drivers are installed said item. what can i do???????
sullylove
Try installing HTC Sync (leave it installed but don't have it open) before you run the RUU.
so i reinstalled HTC Sync, and the computer did pick up the phone long enough to run the aria stock rom, but now when the phone rebooted and finished installing the rom, the computer no longer registered anything plugged in. so i wasnt able to run unrekovered or now anything else, as it seems the computer still hasnt found the phone, and i can no longer do a hboot recovery to a backed up rom. it definitely seems to be the computer. but now im kind of in limbo, cant reload a back up, and computer still cant pick up the usb phone. reinstalling the computer system to factory, to clear anything that the 3.2 CWM may have installed, and i guess also wipe the sd on the phone as well. is there anything that a CWM installs onto a sd card? computer?
Next you should uninstall HTC Sync (but do not uninstall the HTC drivers), and also install the HBOOT drivers by following these directions: http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
After that, Unrevoked should work.
i did all of that step by step, and when i plugged the usb in during Hboot installation it never showed up as other device\android 1.0 it showed up as Android\My HTC. after installing the specific driver as per instructions, it did change to Android bootloader interface, but problem is unrevoked, nor the computer are registering any phone being plugged in. the program wont run unless it has a phone connected to computer. is there something to the sd checking missing files screen i posted? and apparently recovery can no longer be obtained.
I don't know what you could have done as far as installing drivers on your computer. Perhaps you should try starting from scratch on another computer if you have access to one.
There is also an Ubuntu LiveCD method that might work for you. I assume it's mentioned somewhere in the Unrevoked thread.
thanks, i had tried the ubuntu live cd unrevoked install option, but since the computer never registers a phone plugged into the usb port, it wont install. damn...i dont have access to another computer. could it be something on the sd drive? plus, should the hboot Eng S-On be off?
sullylove
I don't understand. How were you able to run the RUU if your phone won't show up on your computer?
As far as S-OFF, if you want to go that route you would have to use the recently released AlphaRevX beta. Unrevoked does NOT give you S-OFF.
Nothing on the SD card should matter, but feel free to wipe it if you want.
Its been a while but don't you need USB debugging enabled to run unrevoked? Maybe check that?
Sent from my cm7 Aria.
i dont know, when i reinstalled HTC Sync (when the computer installed the My HTC driver) is when the computer picked up the phone. but i havent been able to duplicate that time. USB Debugging was on and still is. i am going to try to see if a computer at work today can pick up the phone. if it does than that at least means its my computer thats not picking up my phone. if the computer does not pick up my phone, than i know its my phone and/or sd card. i honestly dont know why its not picking it up since it was able to do it for the aria rom reset. i hope i can get this rectified.
so i am at work, and so i plugged my phone into the usb at the computer at work, and it found the phone, installed drivers, or at least tried to because HTC Sync wasnt installed on it, nor My HTC Drivers. but i guess that at least means its my computer and not the phone or sd card. at least i have a starting point.
sullylove