Related
Sorry if this is a dumb Question but I have not been able to find a true answer.
What is the advantage of updating My Radio Rom from 1.20 to either 1.27 or 1.35 or should I leave well enough alone.
Its up to you, the 1.35.00.11 version of the radio has the GPS chip enabled, but as you will see in the GPS thread the GPS chip works but has no antenna. The radio should be more stable, and i noticed an increase in the range of my 3G area with it. Make sure to use the version available here (at the top) because they push "des SSPL" to the phone so you dont need to worry about which bootloader or CID you have (not that it matters about CID with radio upgrades...but you know what i mean )
Thanks, i'll probably upgrade to 1.35 using the link you provided
Just upgraded, very straightforward.
One slight issue. After upgrade and soft reset I could not make a data connection.
I made a voice call just to check that was working . . .
then all was OK.
Don't know if the voice call sorted it or what
just make sure you have GPS off or your battery will be in for a ride
kassper said:
just make sure you have GPS off or your battery will be in for a ride
Click to expand...
Click to collapse
Hi,
I also flashed 1.35 nice and easy. So where can you turn GPS off ?
Thanks for the help
char05
Don't worry, GPS isn't enabled unless you install the VRSerial driver (which aint easy....). Even then, it's only turned on when an application specifically opens the GPS comm port.
Sleuth255 said:
Don't worry, GPS isn't enabled unless you install the VRSerial driver (which aint easy....). Even then, it's only turned on when an application specifically opens the GPS comm port.
Click to expand...
Click to collapse
Hi Sleuth255,
thanks for the help on this issue. I do not indent to install VRSerial. I do have an external GPS mouse which is fine for me.
Greets
char05
I recently upgraded and it was a major improvement for me. Far fewer dropped calls, better reception, etc.
I have noticed a noticeable decrease in in-call volume...is this an issue with this rom? At max volume, I have trouble hearing in a noisey environment...never had this problem before.
RUU_1.35.00.11_radio_only.exe wants to connect to the internet?
I upgraded my radio rom yesterday and kept the installation file, RUU_1.35.00.11_radio_only.exe, on my laptop. I downloaded the file with the link supplied in the wiki page.
Now today I get a warning from my f-secure saying that the exe file “RUU_1.35.00.11_radio_only.exe” wants to connect to the internet. I clicked deny and it kept trying to connect four more times then it stopped. I scanned the file for viruses and Trojans but F-Secure didn’t find any.
Anyone else had the same problem or perhaps knows whats going on?
ricott said:
I upgraded my radio rom yesterday and kept the installation file, RUU_1.35.00.11_radio_only.exe, on my laptop. I downloaded the file with the link supplied in the wiki page.
Now today I get a warning from my f-secure saying that the exe file “RUU_1.35.00.11_radio_only.exe” wants to connect to the internet. I clicked deny and it kept trying to connect four more times then it stopped. I scanned the file for viruses and Trojans but F-Secure didn’t find any.
Anyone else had the same problem or perhaps knows whats going on?
Click to expand...
Click to collapse
its probably thinking that access to the ActiveSync device (which as far as i am aware is via tcp over usb) i wouldnt worry about it. disconnect from the internet if you are.
Hi,
HOUSTON WE HAVE A PROBLEM!!!
After install this radio version, my phone want to start...
WiFi is ok
BT is ok
But the phone remain in of, even i restart it using the wireless manager...
Some suggestion?
Tanks
load up dotFred's taskmanager and see if the RIL service has started.
@ricott:
I built that RUU with an unregistered copy of WinRAR. Maybe it's phoning home for some reason....
vulkanxxv said:
Hi,
HOUSTON WE HAVE A PROBLEM!!!
After install this radio version, my phone want to start...
WiFi is ok
BT is ok
But the phone remain in of, even i restart it using the wireless manager...
Some suggestion?
Tanks
Click to expand...
Click to collapse
Issue resolved!
If the phone won't start, after flashing radio 1.35, simply reflash the SO.
mrvanx said:
Its up to you, the 1.35.00.11 version of the radio has the GPS chip enabled, but as you will see in the GPS thread the GPS chip works but has no antenna. The radio should be more stable, and i noticed an increase in the range of my 3G area with it. Make sure to use the version available here (at the top) because they push "des SSPL" to the phone so you dont need to worry about which bootloader or CID you have (not that it matters about CID with radio upgrades...but you know what i mean )
Click to expand...
Click to collapse
Did you upgrade from 1.34.00.10 or a lower version radio ?
Would like to know if there is any "real" advantage to upgrade from 1.34.00.10 to 1.35.00.11 ?
I am experiencing some missed calls due to the always GPRS / 3G connection I am running for emoze push mail.
Hey all,
I have my athena for a couple of days now but I still can't get the GPS to position. As it is a T-mobile Ameo I used Oprio's Unlocker first. Everything went fine and now I can use it with every SIM. Then I upgraded with the WM6 Dopod U1000 and so far so good. The only thing that worries me is that I can't get the GPS to work. I tried both OziExplorer and Googlemaps, also BeelineGPS and GPSTuner. None of these programs can find a satellite and obtain a position. Am I missing some settings or maybe there are no satelites over my area?
OPp and something else that bothers me. Is the Status Display just not working under WM6 or it's only by me so?
I have the x7500/Advantage and GPS works after updating to WM6. I haven't yet unlocked my phone because i'm waiting for the cooked ROM's to be released before I go through this.
Have you installed maybe some other software that uses GPS and see what happens or are you trying it with just one program?
have you changed the gps settings in start-settings-system-external gps?
I use software-none hardware-5 baud-9600 tick-manage auto.
run quickgps first before you try any of your programmes,and let it update, this will give your progs satellites to look for and speed things up a bit, it does take some time to get a fix.
you haven't tried selecting it as a sirf-star have you? that will stop it working and need the battery leaving out for a while..
fards said:
have you changed the gps settings in start-settings-system-external gps?
I use software-none hardware-5 baud-9600 tick-manage auto.
run quickgps first before you try any of your programmes,and let it update, this will give your progs satellites to look for and speed things up a bit, it does take some time to get a fix.
you haven't tried selecting it as a sirf-star have you? that will stop it working and need the battery leaving out for a while..
Click to expand...
Click to collapse
yep I tried both COM5 and COM4 with 4800/9600, also ran the QuickGPS.
What do you mean by selecting it as a sirf-star?
some software (for example memory map navigator) gives you the option to select different types of gps receiver protocols, there are a few. garmin, navman, magelan, sirf, nmea,
nmea is what the 7500 uses, but if you select sirf-star then it appears the gps shuts down, and the best way of restoring it at present is to either take the battery out or if you're lucky just hard reset it.
I did this
No, I haven't selected sirf. Is there some simple GPS software just to try whether the integrated GPS is working? Could it be just that there are no satellites over my area?
Come on guys, tell me how you get your GPS to work. Should I go back to WM5 or maybe change the Radio ROM? All the programs I tried still can't find any satellites? Any suggestions for other settings?
mobiles said:
No, I haven't selected sirf. Is there some simple GPS software just to try whether the integrated GPS is working? Could it be just that there are no satellites over my area?
Click to expand...
Click to collapse
I don't have an answer for you, but I can tell you that the GPS satellite system covers the whole planet, so there are some over your area. Sounds like it could be a hardware problem.
Hmm I know but althoufh I am in the city centre it shout find at least 1-2 satellites. Maybe I should go somewhere out of the city and try there. I still doubt that there's something wrong with the settings or the software.
i had the same problem, using AMEO, unlocked using olipro unlocker.. GPS never worked afterwords .. the SIRFbootloader section in the ROM isn't updatable getting a communication error and that is it. I've to return it to T-mobile.. don't know how to remove the Olipro bootloader and how i can get back the original T-mobile rom!
Hope your problem is fixable .. as mine isn't
whammer said:
i had the same problem, using AMEO, unlocked using olipro unlocker.. GPS never worked afterwords .. the SIRFbootloader section in the ROM isn't updatable getting a communication error and that is it. I've to return it to T-mobile.. don't know how to remove the Olipro bootloader and how i can get back the original T-mobile rom!
Hope your problem is fixable .. as mine isn't
Click to expand...
Click to collapse
I did upgrade to Olipro, but I have bever seen any communcation errors. As far as I can tell, every upgrade went fine. My GPS works in 2% of the cases, it takes forever to get a fix, and after even the slightest displacement or move, the fix is gone again.
I am not getting any communications errors. I did all all the settungs as shown on this site http://www.x7501.com/forum/YaBB.pl?num=1184315093/0
and f.e on Google maps it just shows "Seeking GOS satellites (0)"
On the BeelineGPS I get "Fix not available" and a red circle blinks.
I really don't know what to try more. Maybe should I flash another Radio ROM or get back to WM 5.0? Any other suggestions?
mine too after upgrading to WM6, my quickGPS is not able to download the satellite data via Activesync. i used to be able to do so on WM5... whats wrong?
try this!!
Unplug battery then plug it again, this will help your mobile like factory reset !
lucky
mobiles said:
Come on guys, tell me how you get your GPS to work. Should I go back to WM5 or maybe change the Radio ROM? All the programs I tried still can't find any satellites? Any suggestions for other settings?
Click to expand...
Click to collapse
For tests I am using old small app which was fro PPC2003. It works fine with my Advantage X7500 on Com4 and 4800 baud rate in WM6. It usualy starts showing satelites after 1 minute or so.
I have attached it here.
Edit:
I never tried to use quickGPS via ActiveSync. I use vsta. However it works fine and downloads GPS inf via WLAN/GPRS/UMTS or what is actualy available.
Did you do step 2 and three of Olipro Unlock
Step 2 Sends A Radio Rom to Unlock and step 3 a Rom tha make your GPS work again
It says so in the Olipro Unlock Documentation
I would use Google Maps to test to see if your GPS is working.
Open the URL in IE on your phone and download it from
http://m.google.com
1. If you plan on using the orginal software that came with your phone, then you will have to unlock the GPS.
Here are the instructions.
http://forum.ppcgeeks.com/showthread.php?t=49933
2. If you decide you don't want the slow, locked down Verizon ROM, then you can download a cooked ROM by Scott Crosler which has the GPS already unlocked. **You will have to unlock your Verizon phone first before installing cooked ROMS**
Here are the instructions
http://forum.ppcgeeks.com/showthread.php?t=42503
3. If you did step 1 or step2 and your GPS still can not lock onto satellites, then check the following settings.
Settings>>Phone>>Services>>Location Settings
Click on "Get Settings" and make sure you have "LOCATION ON" selected
I know you can find all of this information in different parts of the forum, but I thought I would piece it all together for a newbie like I was this morning.
I'm using the 20105 B2B and can't get my GPS to work (on VZ Nav, Live Maps or GMaps), do I need to run the GPS programs in the GPS folder first?
DNak206 said:
I'm using the 20105 B2B and can't get my GPS to work (on VZ Nav, Live Maps or GMaps), do I need to run the GPS programs in the GPS folder first?
Click to expand...
Click to collapse
Did you use the |||bored||| GPS fix on your phone yet?
If not, you will need to do that first then follow the rest of the directions above.
Once you have done that, I would update the Quick GPS software and then launch the GPS tool and hit the open port button. Despite what others have said, no other changes need to be made as the phone sees the GPS no matter what you tell it. Make sure you are outdoors when you run it though.
DNak206 said:
I'm using the 20105 B2B and can't get my GPS to work (on VZ Nav, Live Maps or GMaps), do I need to run the GPS programs in the GPS folder first?
Click to expand...
Click to collapse
Make sure you do step 3. I couldn't get it to work until I turned the location on. By default, it is set to 911 only. It was for me anyways.
Hi Guys,
I've been combing through this site and PPCGeeks for a week now with no success, so I though I ask. I can not get my GPS to work, I'm beginning to think that this phone (VZW Touch Pro) doesn't come with a GPS.
This is what I tried so far. I made sure my GPS setting is set to ON in the phone settings. QuickGPS downloaded the satellite list, installed and ran HTC GPS Tool per the instructions loadshadowz. I've downloaded and install PHM Registry Editor and edited my registry files. I've also downloaded and installed bored's GPS fix. Also read that someone had luck using com3 instead of 4, so I tried coms0-5 with no luck.
I flash my phone with Mighty ROM 5.
Thanks
GPS fix
This should be exactly what you are looking for. I can't believe that no one has told you this yet.
http://forum.xda-developers.com/showthread.php?t=462206
It works
xguerox
Thank you so much
Just wanted to say that the title of the thread had me laughing to myself for a little while.
I was thinking to myself, "odd that some poor soul is lost somewhere, and his GPS is failing on him, but he had the presence of mind to post on xda-developers to get help."
Godspeed, sdkvang.
weso said:
Just wanted to say that the title of the thread had me laughing to myself for a little while.
I was thinking to myself, "odd that some poor soul is lost somewhere, and his GPS is failing on him, but he had the presence of mind to post on xda-developers to get help."
Godspeed, sdkvang.
Click to expand...
Click to collapse
Here is another poor soul.
I did the Verizon MR1 (2) update, bought an external GPS receiver, and NO GPS. It appears that I am not getting the bluetooth receiver to pair up with my Touch Pro and I don't see any GPS on Google Maps except when my data connection is running. I keep shutting it off, but it comes back on.
Am I doing something wrong? If so, could someone tell me what it is and how to correct it.
Thanks
After applying GPS Fix for Verizon, you can use internal GPS. No need to buy external one. Verizon locked it out by software means and the receiver itself is inside the phone. You just have to unlock it by that fix and then download GoogleMaps for Windows Mobile device. If it shows you that version for your phone is not available the go to m.google.com using PC Computer and download generic Windows Mobile cab file. Seems like google is unaware that Verizon unlocked GPS receiver and still thinks it's incompatible. Probably because our (Verizon) phones introduce themselves as Raph500 instead of Raph800 as all other TPs.
I myself downloaded MR1 V2.0 release from here and guarantee it works. Just backup your contacts etc since this is complete ROM from Verizon so you WILL loose everything that is on the phone (Storage Card is safe and won't be erased).
Let me know
Hi.
I have got observations from differtent roms ( not anly my roms and with different radios - even last 321 ) that very rarely ( I noticed only once per one tested rom but my tests were too short ) something wrong happens with GPS service. None program gets any data from GPS port. Changing managed port in this case gives nothing. Programs simply do not get any NMEA data.
Maybe return of GPS service from sleep mode is not always correct ?
As I remember some people had similar problems and they had to restart WM.
I detected is is not necessary because it is enough to restart GPS service and all start to work perfect. That is why in my new rom updates ( not in UPDATE3 ) I will include small utility for GPS restart.
Have anybody similar observations ?
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
I have got observations from differtent roms ( not anly my roms and with different radios - even last 321 ) that very rarely ( I noticed only once per one tested rom but my tests were too short ) something wrong happens with GPS service. None program gets any data from GPS port. Changing managed port in this case gives nothing. Programs simply do not get any NMEA data.
Maybe return of GPS service from sleep mode is not always correct ?
As I remember some people had similar problems and they had to restart WM.
I detected is is not necessary because it is enough to restart GPS service and all start to work perfect. That is why in my new rom updates ( not in UPDATE3 ) I will include small utility for GPS restart.
Have anybody similar observations ?
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Good idea, we have all noticed that a soft reset is necessary to get back gps functionality, so a utility that would do it for us would be great, its a bane of using the TG01, if possible could you make this utility available to all?
(InsertNameHere) said:
Good idea, we have all noticed that a soft reset is necessary to get back gps functionality, so a utility that would do it for us would be great, its a bane of using the TG01, if possible could you make this utility available to all?
Click to expand...
Click to collapse
Seconded Even after spending some time looking at the AGPS dimension, I've not been completely convinced that there wasn't something else happening - if it can be better controlled by a service management applet, that would be a very useful advance. Would also much appreciate if can be made available (or appropriate advice on config).
Best regards,
Kevin
(InsertNameHere) said:
Good idea, we have all noticed that a soft reset is necessary to get back gps functionality, so a utility that would do it for us would be great, its a bane of using the TG01, if possible could you make this utility available to all?
Click to expand...
Click to collapse
Yes, I can share it with all users but it will be difficult to prove it really works ( You have only my word ) unless someone has found a way to "force" GPS service to stop working good. Usage is very simple. After You start it You get message "GPS service restared".
That is all.
Regards
fxdjacentyfxd
Hi everyone, I use the latest version of GPSMod on my TG01 and I have no GPS problems whatsoever.
I am currently using MiROM1_rel5 with 1800 radio and all is fine, even before using this rom (apart from when I tried radio 321) I have never had any issues with the GPS after I started using GPSMod.
I use IGO with my TG01 and you will probably know from other threads that this is probably the worst package to get working on the TG01 but I don’t have any GPS issues at all.
Use the latest version (3_4_2) and keep everything at the default settings and it configures COM2 as the 'new' GPS port and I use this in my SYS.TXT
[GPS]
port="2"
baud_rate="4800"
I have just come back from Italy and when I turned on my TG01 outside Nice airport and I got a lock in less than 2mins and using my TG01 in and around Italy no issues and when I returned back to good old UK it took a couple of mins to get the first fix but its been fine.
dr_strangetrick said:
Hi everyone, I use the latest version of GPSMod on my TG01 and I have no GPS problems whatsoever.
I am currently using MiROM1_rel5 with 1800 radio and all is fine, even before using this rom (apart from when I tried radio 321) I have never had any issues with the GPS after I started using GPSMod.
I use IGO with my TG01 and you will probably know from other threads that this is probably the worst package to get working on the TG01 but I don’t have any GPS issues at all.
Use the latest version (3_4_2) and keep everything at the default settings and it configures COM2 as the 'new' GPS port and I use this in my SYS.TXT
[GPS]
port="2"
baud_rate="4800"
I have just come back from Italy and when I turned on my TG01 outside Nice airport and I got a lock in less than 2mins and using my TG01 in and around Italy no issues and when I returned back to good old UK it took a couple of mins to get the first fix but its been fine.
Click to expand...
Click to collapse
Hi.
We do not say about any regular GPS failure but about very rare cases.
Nobody knows when it happens so it can concerns Your solution too.
It would be desirable that users who met this problem, tell us what GPS drivers/software they used when it happened.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
We do not say about any regular GPS failure but about very rare cases.
Nobody knows when it happens so it can concerns Your solution too.
It would be desirable that users who met this problem, tell us what GPS drivers/software they used when it happened.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Igo varients normally lose signal or find sats, then lose signal, radio 0321 improves things a lot for me, but still... GPS signal lost is a common problem, and it never really recovers until a soft reset.
(InsertNameHere) said:
but still... GPS signal lost is a common problem, and it never really recovers until a soft reset.
Click to expand...
Click to collapse
Could You describe it more ?
Do You know whether and how to cause such "unrecoverable" situation so that to get 100% prove my "GPS restarter" really could help ?
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Could You describe it more ?
Do You know whether and how to cause such "unrecoverable" situation so that to get 100% prove my "GPS restarter" really could help ?
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
I can probably prove this using GPSTest on my current radio, if not IGO will do it
(InsertNameHere) said:
I can probably prove this using GPSTest on my current radio, if not IGO will do it
Click to expand...
Click to collapse
Ok. I will try to upload my utility maybe today evening or tomorrow.
Do what You can to "damage" GPS and apply restarter.
Here http://forum.xda-developers.com/showpost.php?p=12492189&postcount=1
my utility.
Remember to stop all navigation software before execution of this utility.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Ok. I will try to upload my utility maybe today evening or tomorrow.
Do what You can to "damage" GPS and apply restarter.
Here http://forum.xda-developers.com/showpost.php?p=12492189&postcount=1
my utility.
Remember to stop all navigation software before execution of this utility.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Its easy to damage GPS, start a gps app, then exit it, gps no longer works till you restart the device, thats how its always worked for me, anyway, after trying your app, still have the same problem. I am sure others can also test for you.
(InsertNameHere) said:
Its easy to damage GPS, start a gps app, then exit it, gps no longer works till you restart the device, thats how its always worked for me, anyway, after trying your app, still have the same problem. I am sure others can also test for you.
Click to expand...
Click to collapse
Hmm, I guess it must be other kind of problem. I have never had a situation when navigation software "kills" GPS ( Ozi Explorer and Garmin Mobile XT ). It was rather after return tg01 from sleep or something other.
1) Do You utilize "standard" GPS driver from any official ROM ?
2) Do You use managed port ( which ) or hardware port ?
3) It happens only with IGO software or any other You execute ?
I have created some simple "terminal" software for PNA devices so maybe we could do some kind of diagnostic.
P.S. As a matter of fact my utility restarts "managed port service" not real gps driver. I can see I have to modify my utility for You. I will restart both: GPS driver and gps service. Maybe it will help.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hmm, I guess it must be other kind of problem. I have never had a situation when navigation software "kills" GPS ( Ozi Explorer and Garmin Mobile XT ). It was rather after return tg01 from sleep or something other.
1) Do You utilize "standard" GPS driver from any official ROM ?
2) Do You use managed port ( which ) or hardware port ?
3) It happens only with IGO software or any other You execute ?
I have created some simple "terminal" software for PNA devices so maybe we could do some kind of diagnostic.
P.S. As a matter of fact my utility restarts "managed port service" not real gps driver. I can see I have to modify my utility for You. I will restart both: GPS driver and gps service. Maybe it will help.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Glad you figured out the problem, i wasn't suggesting that your utility definately didn't work, but i used some simple gps tests, IGO, wait for it to find some sats, then exit, after exit, no gps programs can work again till soft reset, same with the simple GPStest 1.04, i think if your utility restarts both, you will have a very robust little utility.
(InsertNameHere) said:
Glad you figured out the problem, i wasn't suggesting that your utility definately didn't work, but i used some simple gps tests, IGO, wait for it to find some sats, then exit, after exit, no gps programs can work again till soft reset, same with the simple GPStest 1.04, i think if your utility restarts both, you will have a very robust little utility.
Click to expand...
Click to collapse
You can "kill" GPS too simply. Maybe problem is rom dependent or mentioned
applications bahaves in wrong way. Any other users of the same rom report this problem ?
Could You give me any link to download GPStest 1.04 and write some explanations how You used to utilize it ? Just simple steps to "kill" GPS.
It seems to be simple application so I can test what happens .
Regards
fxdjacentyfxd
fxdjacentyfxd said:
You can "kill" GPS too simply. Maybe problem is rom dependent or mentioned
applications bahaves in wrong way. Any other users of the same rom report this problem ?
Could You give me any link to download GPStest 1.04 and write some explanations how You used to utilize it ? Just simple steps to "kill" GPS.
It seems to be simple application so I can test what happens .
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
You can download GPS Test here
Its very simple application, it scans com ports for gps, then just tests how many sats can be found, very very siimple, but very useful for testing whether you can get a lock or not.
So, run gps test, scan for ports, wait for a lock, then exit program, then restart, see if it works again, for me it would not, this may also be dependant on radio, i am currently using mirom8 with radio 0300
I know it doesn't fix the problem but with GpsMod I can start IGo, exit then open Google maps (which is also set to COM2) then exit, then open something like PUTTY and use COM2 then exit and go back to IGo all without having to soft reset and every application working.
It would be great if we could get the gps to work as good an htc gps but for those having problems with the gps then GpsMod is the answer.
(InsertNameHere) said:
You can download GPS Test here
Its very simple application, it scans com ports for gps, then just tests how many sats can be found, very very siimple, but very useful for testing whether you can get a lock or not.
So, run gps test, scan for ports, wait for a lock, then exit program, then restart, see if it works again, for me it would not, this may also be dependant on radio, i am currently using mirom8 with radio 0300
Click to expand...
Click to collapse
I think it is rom/gps driver dependent. I tested GPS via GpsTest. Works perfect.
To catch first 3d fix my tg01 needed a little time. It is obvious.
Then I exited and started GpsTest few times. Every time after start, it showed immediately 3d fix and at least 5-6 sattelites.
P.S. I always utilize COM4 managed port.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
I think it is rom/gps driver dependent. I tested GPS via GpsTest. Works perfect.
To catch first 3d fix my tg01 needed a little time. It is obvious.
Then I exited and started GpsTest few times. Every time after start, it showed immediately 3d fix and at least 5-6 sattelites.
P.S. I always utilize COM4 managed port.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
OK, it must be IGO, what would be useful then, is if the uitility had a mortscript or batch type ability, say you go to run a GPS utility or a GPS navigation application, your utility restarts gps driver and service, then runs program, then does a driver/service restart upon exit. I think its IGO that takes over the port, obviously other people may not have this problem, but i have noticed it on many roms.
(InsertNameHere) said:
OK, it must be IGO, what would be useful then, is if the uitility had a mortscript or batch type ability, say you go to run a GPS utility or a GPS navigation application, your utility restarts gps driver and service, then runs program, then does a driver/service restart upon exit. I think its IGO that takes over the port, obviously other people may not have this problem, but i have noticed it on many roms.
Click to expand...
Click to collapse
What my utility potentially can do , You can do manualy so we will know whether it will help. So when You "kill" gps , do as follows:
1) Execute fdcTaskmanager.
2) Go to services
3) Stop gps service
4) Go to devices
5) Stop gps driver
6) Start gps driver
7) Go to services
8) Start gps service
9) Exit fdcTaskManager
If now IGO or other software will show satelites, modification of my utility have sense to fix Your problems.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
What my utility potentially can do , You can do manualy so we will know whether it will help. So when You "kill" gps , do as follows:
1) Execute fdcTaskmanager.
2) Go to services
3) Stop gps service
4) Go to devices
5) Stop gps driver
6) Start gps driver
7) Go to services
8) Start gps service
9) Exit fdcTaskManager
If now IGO or other software will show satelites, modification of my utility have sense to fix Your problems.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
OK, i will test for you, no problem, and thanks, great work, run out of thanks right now. I am going to reflash to a different rom and try this out.