Related
I have Verizon Wireless service. I want to upgrade my phone for the first time. I've been reading alot and the Wiki but it doesn't go into great detal about how to do it. I want to make sure I have got everything down correctly first.
- First, get my phones ESN, MSID, Security, EPST, and M. IP settings by using ##778, etc.
- Second, I unlock the phone and install BootLoader 2.40 per Wiki instructions.
- Third, I install Titan_Radio_ROM_3.42.30 by coping TITAIMG.nbh to my SD mini card and running bootloader by pressing the 3 keys.
- Fourth, I install dcd_titan_kitchen_3.2.2 by running it and compiling it and coping the created RUU_signed.nbh after renaming it to TITAIMG.nbh and copying it to the SD card and running bootloader by using the 3 keys.
I pretty much checked everything before I compiled it, except items that did the same thing or that was double like the different versions of the camera. Is that OK, or will it eat up all my memory, or will I have other problems? I didn't know what alot of the stuff was, so I thought it would just be best to install everything. Also, the wiki talks about choosing the right carrier and not more then one carrier, but that option wasn't there. I assume that's what the VZ cab is now here for?
- Fifth, copy dcd Verizon Carrier 20080706.cab to the SD card and run that.
Then I do a soft reset and everything should be working? Is that right? Did I miss anything?
I also don't understand the A-key problem and how to avoid it.
I'm also confused about not booting after you upgrade the ROM and after the screen calibration the carrier customisations will run and alter my EPST settings to the operators settings and my phone will be configured to the wrong service. What's that about?
Will it allow me to run the verizon cab file from the SD card after I install the ROM without having to soft boot the phone?
Also, can I use PIM backup and restore to backup to my SD card and then restore after the ROM upgrade? Will that be a problem?
Thanks for your help and time.
Long post, so here is mine:
Your four steps are pretty close, other than mentioning the formatting of the sd card which you probably already know how to do via cmd, you have it right.
If you are not checking extra boxes in the kitchen, you can just use the ROM he posts underneath. If you want standard games, x-button, different versions of the phone or camera, etc or if you want to install your own OEMs then the kitchen is for you. Sounds like you are just planning on hitting everything, which I would suggest against (you don't want or need two phone versions, two cameras, etc). Leave the items where they are unless you know why you are changing them, dont click everything. Do some research on each item by googling xda here.
With regard to carrier cabs, run your carrier cab afterward to get functionality. Yes you can run from SD. I have never needed to do an A-Key reset, but others had to after upgrading radio. Just call verizon and tell them you are not able to authenticate your phone and they will reset your phone for you. Don't worry about what it is or why it happens.
Letting customizations run is for when you run the sprint update, which it doesn't sound like you are doing. If you are running the updates over sd card, you can let the customizations run, but since you dont have UC (research here) there is nothing to run so no worries; it will try to run your UC and see there is nothing there and just reboot, kewl. Don't use backups (Sprite or SPB or otherwise, best to use activesync and UC (see above).
Yes, the simple stuff I left out like formatting the card, etc. I understand that.
I guess I need to use the Kitchen because their are some items in there that I want, and some items that I don't know what they are, and I'll look into it like you said instead of just checking everything just incase it's something I might want or need in the future. Like I said I didn't click on everything, stuff that do the same thing, or different versions of the same thing I didn't click on. So, I think I just clicked on everything but Enterprise + IPSECVPN, Camera 4.05.30525.00, HTC CommManager - Titan 8 Button, and HTC Titan PhoneCanvas (Dailer).
It sounds like I won't need Enterprise + IPSECVPN, because it sounds like it's for some kind of Enterprise network with VPN, and I don't have something like that. I would like to know the difference between the version 4 & 5 of the Camera. I assume version 5 is better. I assume that the Touch 10 is better then the Titan 8 button, but would like to know the differences, also the differences in the Dialers. I assumed the Vogue was preffered since it was the default one that was checked. I haven't checked out the link you left for me yet, so I'll do that to see if I can see the differences.
Do I do a soft reset after I install the Radio and before I install the ROM and after I install the ROM and before I install the Carrier Cab file?
I'm having problems doing backups now. I don't have activesync because I have Vista and it doesn't use activesync. I was able to do backups with Outook and Windows, but they won't work anymore. I was using the USB data cable and they were working fine, but then I got a Bluetooth Dongle and installed that and it messed everything up. I tried one that was compatible with XP and downloaded different drivers and I couldn't get it to work. So, I purchased one that was compatible with Vista and it would sync but not backup my contacts and appointments with Outlook like it would with the data cable. I tried using the USB cable and it won't work anymore either. I can't even get it to make a connection anymore, and it will show an error on the phone. That's why I got the PIM backup and restore software to backup to and from the SD card. I haven't used it yet. I was going to try and use it, and then do a Hard Reset and then restore my data to my phone and try to get it to backup to my Outlook like it used to with the USB Cable. If I can get that to work I was going to try and do the Titan ROM update. Any feedback would be greatly appreciated!! Thanks for all the help!! Take care!
serfboreds said:
Long post, so here is mine:
Your four steps are pretty close, other than mentioning the formatting of the sd card which you probably already know how to do via cmd, you have it right.
If you are not checking extra boxes in the kitchen, you can just use the ROM he posts underneath. If you want standard games, x-button, different versions of the phone or camera, etc or if you want to install your own OEMs then the kitchen is for you. Sounds like you are just planning on hitting everything, which I would suggest against (you don't want or need two phone versions, two cameras, etc). Leave the items where they are unless you know why you are changing them, dont click everything. Do some research on each item by googling xda here.
With regard to carrier cabs, run your carrier cab afterward to get functionality. Yes you can run from SD. I have never needed to do an A-Key reset, but others had to after upgrading radio. Just call verizon and tell them you are not able to authenticate your phone and they will reset your phone for you. Don't worry about what it is or why it happens.
Letting customizations run is for when you run the sprint update, which it doesn't sound like you are doing. If you are running the updates over sd card, you can let the customizations run, but since you dont have UC (research here) there is nothing to run so no worries; it will try to run your UC and see there is nothing there and just reboot, kewl. Don't use backups (Sprite or SPB or otherwise, best to use activesync and UC (see above).
Click to expand...
Click to collapse
Is there a size limit to the ROM file RUU_signed.nbh? There should be. Let me know. Thanks.. Steve
Since this is your first ROM upgrade I think you should avoid the kitchen for now and just use DCD's compiled rom. (this is just my opinion) It will really simplify things for you.
As for PIM backup I would think it would work fine for contacts, but I think you will run into issues if you wan to restore SMS backups because of going from WM6 to 6.1 and the threading SMS that is used for 6.1.
I also saw this http://www.dashwire.com/ I haven't used it yet, but its free online solution for backing up your PPC.
As far as your question for soft-resets go, When you run the update the phone should reset on its own. I don't know why your active sync isn't working, but I would try and get it to work before running these updates to ensure proper connectivity of your device before running these updates.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Thats what you would need to get it to connect.
Gluck!
cleanser said:
Since this is your first ROM upgrade I think you should avoid the kitchen for now and just use DCD's compiled rom. (this is just my opinion) It will really simplify things for you.
As for PIM backup I would think it would work fine for contacts, but I think you will run into issues if you wan to restore SMS backups because of going from WM6 to 6.1 and the threading SMS that is used for 6.1.
I also saw this http://www.dashwire.com/ I haven't used it yet, but its free online solution for backing up your PPC.
As far as your question for soft-resets go, When you run the update the phone should reset on its own. I don't know why your active sync isn't working, but I would try and get it to work before running these updates to ensure proper connectivity of your device before running these updates.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Thats what you would need to get it to connect.
Gluck!
Click to expand...
Click to collapse
I've used PIM Backup since Jan of this year, and have had no issues restoring any SMS from a WM6 to WM6.1. It goes through and threads it all the 1st time you open up messaging, so if you have a large amount of messages, it will take a while to thread it all the 1st time you open it up....
For my first time I did not use the kitchen. I found it pretty easy to do. Just make sure you load the radio b4 the rom.
I just wanted to thank everybody for all there feedback and help, it was very helpful. The 3 main reasons I need to do the ROM update is to take advantage of the new features of WM6.1 and I need to be able to install Java and get my TomTom GPS software working. That's the 3 main reasons right now.
My phone is so messed up right now it's always locking up and having alot of problems from maybe all the apps I installed and tested and stuff. I need to reset it like 3 or 4 times a day. I think that's why I can't sync it with my computer anymore. I'm going to just back it up to the SD card and do a hard reset and get it working again and syncing with my computer and then do the ROM upgrade, etc. I will take your advice and do the stock ROM at first to figure out how to do the upgrade. I will then have to use the Kitchen to enable the GPS and the Java, right? When I do the Kitchen ROM later will I just need to upgrade the ROM, and not worry about any of the other procedures?
Also, when I do use the kitchen to create the ROM what is the size limitation on the ROM file?
Do you also have an option on which Dailer and Camera software?
Thanks again and wish me luck! LOL
Well, I downloaded the DCD compiled rom and it's filename is dcd_titan_3.2.2.exe and I ran it and it doesn't look like you can install it via the SD card. It looks like you have to do it via a PC Sync. Can you do a PC Sync after installing the Radio? Well, let me know. I think I'm ready to get started now. Thanks..
OK, well I got my phone to sync with my PC, but it sometimes has connection and disconnection problems, but I was able to get it to sync everything with my PC once.
I ran EPST and got my ESN and MSID, but I'm not sure what security information I should copy and I can't find the MSN number. There is alot of M.IP information. Do I copy everything in the M.IP Settings and M.IP Default Profile? Is there anything else I'm missing? Thanks.
May I suggest you take a digital Picture and scroll down and take a second one. This eliminates any questions on Handwriting and then blow them up on your PC if you have bad vision.
I found this software and it's even better, it not only allows you to do screenshots, but you can totally control your phone and enter data, etc. from your PC, and it's free!!
MY MOBILER v1.23 (06/15/2008) - FREEWARE
View your mobile screen on your desktop.
Control your mobile by using desktop keyboard and mouse.
Copy/Cut/Paste text between mobile and desktop.
Capture mobile screen.
Drag and drop files to your mobile.
Support ActiveSync / IP Connection
Support Mobile Explorer (File Browse)
http://www.mtux.com/
I found this screen capture software and used it and works great. It only took a few minutes to capture all 13 screens, etc.
SPB ScreenShot Capture Tool
http://www.smartdevicefreeware.com/spb-screenshot-capture-tool/
I know i have seen this mentioned before but in running a search never found a definitive thread on it...so forgive me if this is redundant.
Its my understanding that the same rom build but one being loaded with as many programs as the partition will allow vs. the same rom build with most extra programs taken out should have no noticeable impact on performance as long as you use the task manager to only allow the same essential programs to load at bootup. the down side of a 'light' rom is if you want to add programs later it will not be installed in the partition with the rom....even if there is space..it will take away from storage space.
My question is, if my above assumptions are correct, why do people want light roms? why not have one loaded up with all that can fit...no matter if your talking 2.1 or 3.5 (3.5 giving more space for roms due to the partition being moved).
thanks
Why installing many non needed applications isn't a good idea in ANY PC?
Because..... startup loading .dll, services, reading BIG registry file, crowded windows directory slow down the PC, decreasing available resources and memory.
A WM6 ROM is a swiss knife! Many things, to answer to all user needs... but I have mine . SO you can chose the fast way, flashing a lite rom, of the hardest way (mine), flashing a FULL rom and stopping non needed services, avoid loading uneeded dlls... The same things the chef does before releasing a lite rom . This is the hardest way, you have to know deeply WM6 structure, using a light rom is the easiest way
sergiopi said:
Why installing many non needed applications isn't a good idea in ANY PC?
Because..... startup loading .dll, services, reading BIG registry file, crowded windows directory slow down the PC, decreasing available resources and memory.
A WM6 ROM is a swiss knife! Many things, to answer to all user needs... but I have mine . SO you can chose the fast way, flashing a lite rom, of the hardest way (mine), flashing a FULL rom and stopping non needed services, avoid loading uneeded dlls... The same things the chef does before releasing a lite rom . This is the hardest way, you have to know deeply WM6 structure, using a light rom is the easiest way
Click to expand...
Click to collapse
Stop, stop, stop
My rom is really full, and isnt slower then light roms.
hehe!
There is a difference in available memory with the different SPLs, spl1.2 gives you more storage memory than spl3.5.
That said......
when a rom is loaded with programs it sometimes gives a user problems to install a new build of a said program that was loaded in rom. When you install a newer build and then try to uninstall it you might end up with a "hanged" device (this happened to me multiple times), and the only way to not see that wait cursor is to soft reset, and after soft reset, the program is still there in "remove programs", and if you try to run it after soft reset it won't run, and if you try to install it again you will get the message that the program is already installed and you have to remove it first and when you try to remove it again your device is stuck with the wait cursor again.........after all this, the only way to remove this program that you can't use anymore is to do a hard reset.
this happened to me too many times, this doesn't happen all the time though...some programs got installed over whats built in, like opera9.5 but I ended up with 2 icons in programs.
This is one of the reasons that kicked me away from full roms. I liked full roms before but after these incidents I find that lite roms don't/hardly come with those kind of problems, plus I get more space with spl1.2 to install a good amount of programs that I use regularly and still have more than 100MB left to install more programs that has to be installed to main memory.
Below are things I had said in another post and didn't want to rewrite it, so I just copied and paste (something my friend can't do on his iphone, ha, I still laugh at him about it)
Well really, Lite versions don't really bring much to the table except that it allows me to install only the apps that I need or want without having my programs folder looking like something out of a horror movie , eg. if I use the more robust SoftMake Office 2008 there's really no need for me to have MS Office installed, right?
Lite versions gives me an almost clean OS which gives me the "feeling" that my phone runs faster (even it it isn't running faster and just a subconscious feeling). Plus it installs faster .
Lite Versions are just the courtesy from the chef to us the people who wants the lite version, because the chef cooks in the apps that he wants, so for him to take out all that just for us is real generous....get what I'm trying to say?
It is nothing superior to the full, it doesn't carry the bells and whistles, its just what it is "lite". I have a plethora of cabs and only the ones I use. On a full install I hardly use 50% of the apps that comes with it....actually, I might only use 25%.
For me it all boils down to this......a lite version offers me the option of really customizing my phone, no additives, just the things I put in it.
http://forum.xda-developers.com/showpost.php?p=2536154&postcount=26
Hi All. I got myself into a bit of a jam with netCF3.5.
I've done a search here, but according to the wisdom already here, the install should be straightforward
Here's the problem:
I was experiencing a few probs with a few apps that needed it. They had been working fine, but all of a suddenly they started complaining that they couldn't find netCF3.5.
So, I downlaoded the cab and tried to reinstall. But, just as the instal was starting, my HD2 said: 'the required program is installed in ROM' (or something like that!)...and then the instal aborted.
The apps still won't run. I tried UN-installing CF3.5 from the device using 'uninstall apps' and managed to remove it. But when I then tried to re-install the cab again - I got the same message about it's already installed in ROM. Good job I had a full backup of everything! At least I'm back to where I was before I uninstalled it.
So, what have I done since:
1. Tried and retried a few times to reinstal, but it's made no difference
2. Checked the registry to see if it's pointing to the latest version of net cf3.5. It is
3. Pulled my hair out - that didn't take long )
I guess I'm looking for a way to 'force' install netCF3.5 and stop the message about it already being installed in ROM.
Any help greatly appreciated.
(I'm normally pretty good with these sorts of problems, but this one has left me clueless)
Cheers
Hi all,
I am new to android. First time using it and really know nothing about it.
Bought the G tab at woot. I am knowledgeable with computers, so I hope that helps. Over 50, so need your help here.
I have spent a decent amount of time looking through these forums and there is so much information here, it is hard to discerne what is relevant for me.
I did the OTA update. I do not have an sd card, so all will be through the usb to my home computer.
I have played with the gtab a bit, but I figure, before I go and do a bunch of setup for the family and download apps that if I am going to root it, I may as well do it now. Those of you with experience using it don't like viewsonics version, so I assume that these ROM's must be so much better.
From this thread http://forum.xda-developers.com/showthread.php?t=842004
it reads that if I have stock gtab, I can simply install TnTLite 4.4 without clockworkmod. I assume then that without colckworkmod, I can't clear the cache or datafiles. Do I really need nvfLASH? I read it and it sounds a bit confusing.
I read that you should repartition the gtab. I looked and can't find out how to do this. Is this before or after you run the mod?
For the market fix, http://forum.xda-developers.com/showthread.php?t=845175
I follow the link to download the zip file. When I download apps from the computer, where on the gtab do they go to unzip them?
What does sideload mean? What do you mean when you say make sure that market is working with your google id? do i need a gmail account?
On a side note, the gtab will not load up my yahoo mail account? hmmm, is that correct? My wife has an old aol account that she uses and she said she can't respond to emails, that is true also?
Thanks in advance,
Kozmokrmr
Lots of questions... let's see what we can do here...
Yes, You can setup TnTLite 4.4 without ClockworkMod. However, CWM is included in the install as part of the 3588 Recovery Pack. You can actually switch it in and out as needed for the purposes of clearing caches and wiping data.
Repartitioning is one of the advanced functions of ClockworkMod. You will not likely find it necessary unless you're doing lots of modding (or are particularly anal about procedure, like I am...).
It doesn't really matter where you download or unzip files to as long as you know where they are. I leave them in the default download folder or create a folder for the particular project on one of the sdcards. Sideloading consists of downloading an app's .apk file to the tablet then installing it without using the market. Most file managers (including the one included on the gtab) do this with a click or two.
Yes you will need a gmail account to make the market work. When you start it the first time it will ask for your gmail credentials to log in.
There is a Yahoo mail (and IM) client/app. Not sure about AOL. But either can be accessed through the web browser.
All that being said... if you are planning on using the "Family" accounts setup that comes stock on the G Tablet you'll want to try that before loading any custom ROM. They all replace the contacts app which is required for that to work. I'm not sure if any of the custom ROM's supports any kind of multi user setup.
Thank you K J Rad
To enter clockworkmod, then just use the power and volume up to access clockworkmod from 3588 update? Then do the data and cache clearing? Is clockworkmod, just a tool to do a few system functions?
Ok, then I won't worry about repartitioning.
Hmm, alright, I guess I'll just give the sideloading a go and see what happens.
About NVFlash, should I worry about it or is it only for the guys who switch out roms and play around with it? I figure, once I install a mod, other than maybe updating the rom, I won't be yanking around with it like this anymore.
Ok, then we'll get a few gmail accounts. Thanks.
The internet on the gtab wouldn't access my yahoo. Possibly I need to upgrade yahoo to the paid version to get the pop account.
The AOL account could be read, but she couldn't reply to any emails. Possibly the same problem there.
No big deal about the family accounts, we don't need them. Its not an issue.
The people here I read that have issues (not booting up, stuck in a loop, etc.) have what? done a step wrong, played around a bit too much or just one of those odd software flukes that catches some guys?
So there really is a BIG difference in the stock rom and the modded roms's, yes?
Thanks again.
Power and Volume Up enter "Recovery Mode." If ClockworkMod is installed then that is what you will get. Otherwise you'll get the stock recovery. 3588 does not install CWM. There is a very good thread "Stickied" in the development section about installing Clockwork, ROMs, etc. Once you've got that installed the instructions for installing TnTLite 4.4 and switching between the two types of recovery are in the stickied TnTLite thread. I usually do a data wipe before and after installing a ROM (it works for me... YMMV).
Knowing how to nvflash could be the difference between nirvana and complete disgust. It may never come up but if it does then you will be thrilled that you know how.
Once you have the market installed and working download a better browser. I use Dolphin HD and it works with my Yahoo account just fine (after you tinker with it's settings a bit...). Probably work fine for AOL also. If not, try Opera Mobile.
Any number of things can cause the issues you'll see posted about here. I've suffered magic number mismatch, boot loop, FC's... the whole gamut. If you get comfortable with the tools then you'll be able to recover from anything. Good practices will also lead to greater success. For example, when I'm flashing to a new ROM I do the following:
1) Cache and Data wipe.
2) nvflash to Factory install.
3) Update to 1.1-3588 build.
4) Data wipe (probably not necessary but wth...)
5) Proceed with update.
For experimental builds I modify that to include repartitioning.
Following this procedure has reduced my occurances of unexpected issues to near zero (I don't always remember to do every step...).
Yes... the custom ROMs are "Better" but better is subjective. I like TwoTapsX for its speed and stability though it does suffer from a few video artifacts from time to time. TnTLite is a good solid daily driver for the average user. VEGAn is popular with a lot of power users. Each has its tradeoffs and even the stock ROM has some advantages (easy to use custom interface, decent basic set of integrated apps, settings optimized to reduce confusing options).
Welcome and enjoy.
So I used the ACS/Shabbypenguin root method (do a Google search, I can't post links...) and followed the directions exactly. Well almost exactly, I knew of some issues so this is what I did...
First I downloaded Superuser & Superuser Elite (I previously paid for it on a different phone).
Then I downloaded the drivers and Odin and both kernals.
I installed the drivers and put my phone into development mode.
Next, I turned off my phone then turned it back on in download mode and flashed the pre-rooted kernal as per the instructions there.
Finally, I went through the process again to flash in the stock kernal.
Now the other users had issues with USB connection and the phone not being recognised, the answer to that was on page 11 of the above linked thread (editing the vold.fstab file). I did this (using ES Root Explorer) as per the instructions and restarted.
Things seemed fine for half a day. Now my phone randomly restarts, but not always randomly. I can perform specific actions to cause it to freeze and reboot (example, simply opening the vold.fstab file does this EVERY TIME, but I was able to copy/paste it to the SD card and then open and edit it and even copy/paste it back, all using ES root explorer, and no crash/reboot unless I open it specifically and yes, that's with having the system mounted as R/W).
Another thing I noticed since rooting, and it still has maintained the rooted status, is that any time my phone restarts or I restart it, I open the system tray and this stupid "tip" toast message comes up that, prior to rooting, only came up once. Now, it comes up only once after a restart but resets every time.
I tried to sign up for the ACS forums but for some reason, I've not gotten a single registration e-mail from them and messaged half their admin with no response (the fact that the site has no cancel account and no re-send activation option troubles me enough as it is and in my opinion, should be internationally illegal).
Anyway, that's the issue, I need to resolve these random restarts, which may or may not be caused by this vold.fstab file.
Also, I connect now (before when I did the fix, it worked), the computer doesn't recognise the phone so I can't even re-flash using Odin, but the phone works (until randomly restarting which is a pain...), so I am at a loss as to what the actual cause was and since nothing I change sticks when it restarts, I have no idea what the deal is.
Some more information...
Nothing I change sticks. I have programs that I uninstalled, but they still show up in the system tray after a reboot (if I click it, it says that the program is not installed, but it still shows up).
I tried swapping back the original build.prop - didn't stick.
I tried factory data reset - didn't do anything.
I tried a restore in BusyboxPro (stericon or something is the dev) - restored but there were some "errors".
Tried temporarily unrooting (Superuser Elite) - nothing.
I read about a power button issue - my power button is fine.
There is something wrong specifically with the OS in some way that certain actions cause it to freeze and restart. I have a game, "Deathworm" that I can play with no issues or freezes. I can do a few things but:
if I get on the mobile browser, sometimes it will freeze and reboot.
if I run AppManagerPro III, sometimes it crashes when calculating the cache size (always when it gets to 70/125 or whatever the total is, but always at 70 if it DOES crash).
Now I went into task manager and went through and cleared all the app data individually app per app. Before when I tried to do this (before restoring in Busybox, before restoring the original build.prop, etc), it would crash when I went into the downloaded tab of the thing to clear the cache. This time it didn't crash on me.
Other root stuff I have installed which was working before the random rebooting issue:
Script manager (free) and V6 supercharger (also unsupercharging wouldn't stick, which I tried before restoring the build.prop manually)
SuperUserElite
App Manager Pro III
SD Maid Pro
ES File Explorer (free version I think)
BusyBox Pro
SU Update Fixer
Screenshot It
After everything I just did, it seems to (for the moment) be working again, I am just waiting to see if it crashes again. So far I have opened and closed App Manager Pro III a few times and it calculated cache sizes with no crash. Right now, SD Maid Pro hasn't crashed yet open, hide certain tabs (clearing the data so I had to reset those options), close, reopen, scanned with system clean and app clean and actually did the app clean, so far no crashes (my phone would normally have crashed by now), cleared databases and no crash.
Also while I was in there, two programs I uninstalled via the system tray (menu button, edit, uninstall) that kept coming back were a buld.prop editor and some wonkey game (Fall down) or something, anyway those were in the downloaded section of task manager and I uninstalled them through there. Maybe that did it?
And no... still freeze, reboot and not saving any changes.
So far I've also tried uninstalling practically everything I installed and those changes aren't persisting (the uninstalled apps remain uninstalled, but reappear in the system tray or on the home screen if I had an icon there for it).
No changes I make to anything persist except things I save or copy to the SD card.
Tried factory reset again, still didn't stick.
So apparently SOME others have this issue without rooting, I can't tell, there's not a ton of reviews that I can find beyond "F*** STRAIGHT TALK CUSTOMER SERVICE THIS PHONE IS CRAP".
I hate to keep bumping this, but every time I have an issue, I am highly detailed in things and I NEVER EVER have EVER gotten a response EVER on this site, EVERRRRRRRRRRRRRR.
I really really really don't want to waste another ~$200 for nothing.
I would appreciate even a response of "yeah I have this problem too".
I don't want this to die like all the other threads I started...
Does anyone even have a clue as to where I can begin attempting to troubleshoot this on my own then?
What tools should I look into or what logs in what folders?
I know this post is very outdated but there may still be someone tinkering with these older phones still as I am.
Over the past few days I have been trying to get this Straight Talk Samsung Galaxy Proclaim rooted and working just for something to do.
I'm not one to ask for help to often so I end up doing a lot of reading and a lot of trial / error.
In my reading I have seen quite a few posts / comments around the net stating not to use the Shabbypenguin root method
as it is very buggy and unstable.... I can not tell you from experience so please do not quote me. I ended up using the TeamProlusion
root method and all has went very well other than a few minor problems I need to work out.
In all honesty I'm not real sure what I may post or may not.... ( Yes I need to REread the rules for sure ) but I
will leave this link for anyone that may be in need... Mods / Admins please feel free to edit this post if this is not permitted and
please accept my apologies.
Please google androidarea51