Hi,
I have flash my hermes to wm6.0 using the hard spl menthod.
But now i try to use the dopod 838 pro original wm5.0 rom to downgrade but it won't allow.
so how do i downgrade my 838 pro from wm6.0 with hard spl to wm5 ?
for your info i flash the 838 pro according to Mr. MrVanx's LVSW Upgrade Guide.
thanks for the help.
regards.
Extract the NBH and use CustomRUU to flash it.
If you want a brick-safe downgrade, take only OS, ExtROM & Splashes from your dopod838 rom and create a NBH only with this, then flash it with CustomRUU.
FYI
Just as an FYI this didn't work for me as I had upgraded my bootloader too.
If you are in the same boat do a search for 1.10 OLI boot loader, install that (very quick), then grab your original ROM (from the wiki page)
Good luck,
where to download wm5 custom ruu Os only?
Zaps said:
where to download wm5 custom ruu Os only?
Click to expand...
Click to collapse
read here WM5 Downgrade guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
abenk said:
read here WM5 Downgrade guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
Click to expand...
Click to collapse
link to RUUWrapper.exe (CustomRUU by olipro) not working, any other link to download?
This touches on a question that I have seen bounced around a good bit but never fully answered. If we upgrade our device to HardSPL and then to WM6, is it possible to take our device back to stock conditions including the stock SPL as well as the Stock WM5? Ie, is it possible to get the device back to a state where we can simply download the .exe file from HTC's website and run it in order to re-flash the phone?
Zaps said:
link to RUUWrapper.exe (CustomRUU by olipro) not working, any other link to download?
Click to expand...
Click to collapse
read here
http://forum.xda-developers.com/showthread.php?t=298737
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Bram87 said:
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Click to expand...
Click to collapse
Well, this is not EXACTLY correct. Check out THIS LINK for downgrade directions. You will need to get the original ROM from somewhere. It is possible that it is HERE IN THE WIKI. Chances are that one of the files there has the same Radio, IPL & SPL. You will just need to find the OS, if it is not in there. (In fact, based on the specs, it looks like the third from the bottom of the English ones - Vodafone?) To flash, you will need dutty's good nbh tool to unpack the ROM, becuase you will need to do the IPL and SPL separately from the OS and radio. See THIS LINK for that info. If you don't want to get into all the unpacking, you *could* do the SPL downgrade first, then the upgrade, but it is generally good practice to downgrade SPL as a LAST step since you lose the hardspl protection as soon as you do it. Finally, use the google search link in my signature if you need to find anything else. Good luck.
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Like Todd said it is possible.
Check out the links in my signature and read alot before actually doing so.....
That is a practice tip
The Mr VanX guide alias HTC Hermes guide has complete steps to do this!
Good Luck
Ok, tell me if i correctly understand..
I found the correct rom, after i have to unpack this rom with dutty's good nbh tool..(i have to remove Ipl & Spl?).
After the unpack i have to pack again the rom without ipl and spl and flash it in my Herm??!!is it correct? And in the end i have to change ipl and spl(is it a down grade?).
Last questions yet,
What i have to verify first that i start all this work on my herm to not brick my Herm?
Thank you to all again for the help that you are giving to me
All the best
I may have made it more complicated. That is the process I use.
Best thing to do is simply follow Mrvanx guides.
First downgrade the OS/Radio using THIS GUIDE
Then downgrade SPL/IPL using THIS GUIDE
That is all - as long as you have HardSPL, it is VERY hard to brick your device. So, do that last.
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
zetax said:
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
Click to expand...
Click to collapse
Yes. The only reason to remove HardSPL is for warranty. Just for clarification, there is no Hard IPL, only Hard SPL, but I know what you mean.
Basically, 99% of the time most of us flash we are only flashing OS or Radio. SPL and IPL don't change often. Most cooked ROMs are released as OS only.
Ah ok perfect, i'm not interested to the device warranty, because i bought it on ebay from Uk, and there is no warranty on my device, so i can only flash os without ipl and spl..
Thank you very much fo all the help
<< ZX >>
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
zetax said:
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
Click to expand...
Click to collapse
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
todd_jg said:
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
Click to expand...
Click to collapse
Todd, thanks very much, i didn't know that with winrar was possible to unpack an .exe file,now i have all i need to flash my device with the hold or the new vodafone uk rom.
Tnx my friend
I have done the flashing, it works perfect.. now i learn the way, i can flash every kind of Os in my tytn following this way?for example o2(Uk) os can be put in my device?
Where here in xda forum can i find the software(for eample the software that shaps have included in his Os) for my device customization?like today home,weather widget, or the automatic operator configurator etc etc?
Tnx todd
Ok so I read the tutorial on how to load a new ROM but what I want to know is once I finish step 9 on the G4 section will I then have the WM6? No where does it say I have to download WM6 . Is This what I'm looking for? So once I load the softSPL on the phone I use the RUU to load that software? Thanks in advance.
Any one? Please? I'm tired of 5.0
Need2Speed said:
Any one? Please? I'm tired of 5.0
Click to expand...
Click to collapse
Check out the "Wizard mobile 6" forum for all latest wm6 and wm6.1 Roms.
Cheers!
Hi,
Can Anyone teach me how to downgrade my ROM? I tried reformat but it's still Kumara WM6..
Can anyone help?
hmm.. i want to ask it..^^..
There are many posts that tell you how to downgrade from wm6 to wm5 say, all i do is run the wm5 install software then it comes up with an error, and then i run it immediately again and it installs, hope this helps
2234jones said:
There are many posts that tell you how to downgrade from wm6 to wm5 say, all i do is run the wm5 install software then it comes up with an error, and then i run it immediately again and it installs, hope this helps
Click to expand...
Click to collapse
See my post http://forum.xda-developers.com/showthread.php?t=360664
there are detailed tutorial in the second thread.
hi guys
Can anyone tell me how I can upgrade my HERM200 TyTn from WM6.0 to WM6.1 and send me the necessary link. Sorry, I'm new in here and it might be a repeated question but I couldn't find the answer
km121 said:
hi guys
Can anyone tell me how I can upgrade my HERM200 TyTn from WM6.0 to WM6.1 and send me the necessary link. Sorry, I'm new in here and it might be a repeated question but I couldn't find the answer
Click to expand...
Click to collapse
Hi.
Generally you can flash with any herm100 rom. previously you must back up yours buttons driver and after flashed. just install or restore these drivers.
So you must look for Hermes ROM.
Just look for the WM 6.1 version you like. And look for the RRU Wrapper for the rom and install it.. Visit the link below, it may help..
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners