Flash at your own risk..
You will need to install olipro hard spl 2.40, radio 3.35
You might need mdn and msid after you flash , so make sure copy those before you start.
They way i did the upgrade was..
i had olipro 2.40 hard spl alread installed.
then i flashed stock 3.35 sprint rom ( to install radio )
then flashed attached rom and i did not have to enter mdn or msid..
http://rapidshare.com/files/98751322/RUU_signed.zip.html
auto update, msn live, enterprise ,entertainment and catalog, sprint telenav, java , sprint music etc removed.
telus settings ( internet connection, error codes, epst etc ) added.
Rest is stock.
Update: March 16 2006
http://www.megaupload.com/?d=HKYFCJ1U
some more clean up. Removed cyberon voice dial ( sda deamon process is gone ), removed htc guardian and some other minor stuff removed that i dont remember.
Added: Java, Opera mini with proper shortcut and removed security warnings etc when you launch opera mini. Added Gps launcher for tomtom, Added Pdc Digital clock. Made some registry adjustments to speed up internet explorer. Activated extened rom that install internet explorer scroll fix, google maps and live search.
these are the speeds i am getting ,, so rev a is working
Update. Ok will try and let you know!!! the first ROM DATA was not working!
Flashing in progress
how do we set to rev A?
For TELUS P4000 works great
BOOTLOAD MODE
1. Try getting to the BOOTLOAD MODE by pressing POWER, CAMERA and RESET all a the same time
2. You should see at screen with red green blue white
New RADIO and CE ROM
1. Hard-SPL-240-MFG.exe/titan_SPL_2.40-olipro.exe (follow the instructions)
2. Run titan_radio_3.35.04.exe (very simple GUI instructions)
3. The titan will reboot by it's self, put it back in BOOTLOAD MODE
4. Extract dcd_titan_kitchen_3.0.0.rar to a directory and run BuildNB.bat (it takes a couple of min)
5. Select the stuff you want and don't forget you carrier (TELUS....)
6. Press the PLAY button (when finished, which is hard to see, when play is green) close the BuildOS
7. In a DOS windows it will build the CE ROM (follow the instructions)
8. Titan will reboot
Do you have to be in Bootload Mode before you do anything? ..Which one is the reset button
Thanks! looks cool. Will try when i finish playing around with this one.
I dont understand why i cant connect to the web?
Mine works great! There's just that problem with the 2 icons at the top..and how do you get the battery meter on the home screen now?
youre web is working?
Yes it's working, but i'm having a problem with text messaging, it seems to send OK but i'm not receiving them .. anyone else have this problem?
Finaly got the data working. It was a pain in... but after long work got'it. now its time to play and see how this baby goes
hlouie said:
For TELUS P4000 works great
BOOTLOAD MODE
1. Try getting to the BOOTLOAD MODE by pressing POWER, CAMERA and RESET all a the same time
2. You should see at screen with red green blue white
New RADIO and CE ROM
1. Hard-SPL-240-MFG.exe/titan_SPL_2.40-olipro.exe (follow the instructions)
2. Run titan_radio_3.35.04.exe (very simple GUI instructions)
3. The titan will reboot by it's self, put it back in BOOTLOAD MODE
4. Extract dcd_titan_kitchen_3.0.0.rar to a directory and run BuildNB.bat (it takes a couple of min)
5. Select the stuff you want and don't forget you carrier (TELUS....)
6. Press the PLAY button (when finished, which is hard to see, when play is green) close the BuildOS
7. In a DOS windows it will build the CE ROM (follow the instructions)
8. Titan will reboot
Click to expand...
Click to collapse
These are two different things.
Dcd is using wm 6.1. this thread is about telus version of sprint 3.35 rom.
ok guys how did u get the internet working on this?
hlouie said:
For TELUS P4000 works great
BOOTLOAD MODE
1. Try getting to the BOOTLOAD MODE by pressing POWER, CAMERA and RESET all a the same time
2. You should see at screen with red green blue white
New RADIO and CE ROM
1. Hard-SPL-240-MFG.exe/titan_SPL_2.40-olipro.exe (follow the instructions)
2. Run titan_radio_3.35.04.exe (very simple GUI instructions)
3. The titan will reboot by it's self, put it back in BOOTLOAD MODE
4. Extract dcd_titan_kitchen_3.0.0.rar to a directory and run BuildNB.bat (it takes a couple of min)
5. Select the stuff you want and don't forget you carrier (TELUS....)
6. Press the PLAY button (when finished, which is hard to see, when play is green) close the BuildOS
7. In a DOS windows it will build the CE ROM (follow the instructions)
8. Titan will reboot
Click to expand...
Click to collapse
thanks tons!
great instructions.
I have copy all my settings fields to excel (one by one) that was what saved me. whe done the migration to the new radio and rom, even with a OTAS some settings ware missing and had to manually input. One thing i did after a reboot and a OTAS, was ##DATA and choose clear to default , maybe you can try that
Issues getting on Internet - Telus user
It appears that all phone functionality is working. When I launch PIE it attempts to connect and finally fails with a cannot connect error. CAN ANYONE HELP?
speed
I have done all of this but my speeds are slower than before. I seem to hardly be in the EVDO area anymore and only the 1x.
hlouie said:
For TELUS P4000 works great
BOOTLOAD MODE
1. Try getting to the BOOTLOAD MODE by pressing POWER, CAMERA and RESET all a the same time
2. You should see at screen with red green blue white
New RADIO and CE ROM
1. Hard-SPL-240-MFG.exe/titan_SPL_2.40-olipro.exe (follow the instructions)
2. Run titan_radio_3.35.04.exe (very simple GUI instructions)
3. The titan will reboot by it's self, put it back in BOOTLOAD MODE
4. Extract dcd_titan_kitchen_3.0.0.rar to a directory and run BuildNB.bat (it takes a couple of min)
5. Select the stuff you want and don't forget you carrier (TELUS....)
6. Press the PLAY button (when finished, which is hard to see, when play is green) close the BuildOS
7. In a DOS windows it will build the CE ROM (follow the instructions)
8. Titan will reboot
Click to expand...
Click to collapse
Could you post titan_radio_3.35.04.exe
Thanks
Also is this assuming you are running a stock Radio Rom and bootloader? or should I just flash Sprint rom first if im running 3.27.00 and olipro 2.40, Isnt their problems with 2.40 and this radio??
Thanks again
Related
as the topic says...i tired to unlock my telus p4000....now it freezes at the telus boot up screen and says i have no radio
Do this, go to the htc website, choose support, usa, then go to the Sprint Mogul which should bring you to this link.. http://www.htc.com/us/FAQ_Detail.aspx?p_id=75&act=sd
Once you download and install that, it should upgrade your radio to the latest 3.35.04 with the Sprint software. Keep in mind the last time I upgraded to gps enabled software, I had Olipro 2.40.0. Once it finishes and asks you to configure your pointer, boot it back into the olipro boot loader by holding the soft power button on the right and the camera button, then use the stylus to hit the reset switch on the bottom.
Now go into activesync and then the conneciton options, and disable the usb connection. Now load the software of your choice.
I used the Telus flavoured version of the rom available here. http://forum.xda-developers.com/showthread.php?t=376150
Works like a champ, gps works as good as it did before, but the speed and battery life are night and day.
The problem is that you probably didn't upgrade your radio. Follow the instructions I typed out and you'll be golden.
Going to WM6.1 with GPS
1. Hard-SPL-240-MFG.exe (follow the on screen instructions)
2. Titan_Radio_3.35.04.exe (follow the on screen instructions)
3. Put in BOOTLOADER mode (press power camera reset all at the same time)
4. Run dcd 3.0.1 Kitchen (select telus)
5. Wait 5min
6. Dial *22803
7. 1 for english / 2 for french
8. 1 for over the programing (MSID,MDN,AKEY all that stuff)
9. Wait 5min
10. Dial *22803
11. 1 for english / 2 for french
12. 2 for PRL (preferred roaming list)
Going to Original Rom
1. Titan_Relocker.exe (follow the on screen instructions)
2. Telus_HTC_P4000_WM6_07252007.exe
3. Wait 5min
4. Dial *22803
5. 1 for english / 2 for french
6. 1 for over the programing (MSID,MDN,AKEY all that stuff)
7. Wait 5min
8. Dial *22803
9. 1 for english / 2 for french
10. 2 for PRL (preferred roaming list)
You can find the MSID,MDN,AKEY all that stuff by dialing ##778 and then view. In the end using the "Over The Air Programing" is the easy.
Do all of the programing in your home calling area, good luck (eh)
Hi,
I'm trying to flash my Wizard (T-Mobile Mda Vario to be exact) to WM6 ("SNN Edition Version 3.0 LITE"). And I'm stuck
Before I touched anything that was what I got:
IPL: 2.21.0001
SPL: 2.21.0001
GSM: 02.19.11
OS: 2.21.26
// Just after I got my Wizard I have used lokiwiz03a to be able to use it with my Orange SIM card, but after that I have hard reseted it.
Here's what I have done:
- I'm using a Windows XP computer
1. I took off the SIM card and SD card.
2. Turned on my Wizard and connected it via USB to computer (with the latest ActiveSync - don't know the version but I've just downloaded it from Microsoft site).
3. It has synchronized.
- my battery was 85% full
4. I've downloaded "Wizard Service Tool" and clicked the wide button on the top "Enable RAPI..." or something like that (at the black screen on the left it said that I should click this button before doing anything else with this program). Then I clicked "Device Info" to be sure that I have a G4 Wizard.
5. I have unplugged the Wizard's USB (I don't really know why, but I've been nervous).
6. Then plugged it again and waited until the ActiveSync has synchronized.
7. I've used HardSPL as told in "Wizard Windows Mobile 6 for newbies" - everything came fine. I got the white screen and after my device has restarted I had:
IPL 2.21.0001
SPL 2.21.olip
// I don't remember what OS version was, and I got no GSM line
8. I waited for ActiveSync to synchronize and then ran ROMUpdateUtility_Wizard_NoID.exe (from "SNN Edition Version 3.0 LITE" - http://forum.xda-developers.com/showthread.php?t=383524).
9. I did what the program had told me to do (it has been the same as HardSPL).
10. In one of the final steps (after clicking "UPDATE") it hadn't written any information about "Image Version" and "Language" in "To" section but I didn't take this as an issue and clicked "next".
11. I got the progress bar, my Wizard's screen went black.
12. Finally, on the PC I got the information saying that it can't accomplish the upgrade and I should get a newer version of RUU or something like that (I freaked out and closed that window without making a screen shoot). I didn't get even 1% (I had 0) but I've seen the progress bar.
What I have now on my Wizard are three colored bars on my screen. In the top right corner it's written "RUU", in the bottom left "USB". I also have "IPL 2.21.0001" and "SPL 2.21.olip" written on the bars.
Please tell me what should I do now?
Should I unplug my Wizard's USB from PC?
Should I click any button on my Wizard?
Do I already have a brick or is there a chance for me?
Please help.
Thanks in advance,
Alex(ander)
From the "Wizard Windows Mobile 6 for newbies" guide, download the Mun RUU and use that. Extract it somewhere and paste the nk.nbf file from the ROM you wish to use and it should be ok. If you reset your wizard it will boot in WM normally. There's nothing wrong with it.
Thank you very much. You gave me hope
I'll do what you've said when I calm down.
EDIT//
Man, that's great. I have the WM6
Thanks a lot again
You are welcome. Glad everything worked out well.
Ive got a "bricked" S200 G4 (I think)
Text in rainbow screen is
"ILP 2.20.0001
SLP 2.10.0001"
I dont know if the difference here matters.
Tried to upgrade with different ROMs, but no luck, upgrade stops in the process, different % every time.
But the latest Speedking 2 ROM I managed to install. Hopefully I softbooted and got the same rainbow screen.
Any advice?
Why didn't you hardspl your prophet ??
I did, but maybe wrong hardSPL? It is a jungle here, hard to find the right info I need because its so much.
hpn said:
I did, but maybe wrong hardSPL? It is a jungle here, hard to find the right info I need because its so much.
Click to expand...
Click to collapse
1. not 100% of our Prophet can be hardspl done ( like mine )
2. if so, just go straight ahean with my lazt_tool, too easy though....
3. hardspl is just a flashing process but only spend a couple of minutes unlike rom flashing, (from 5 - 10 minute.)
all you have to read in the sticky post on the top pf this forum
I recommend youto read post 1 of this thread....
http://forum.xda-developers.com/showthread.php?t=353547 as follow....
20080601added:
[size=+2]Lazy_Tool (thks YOUZII) is for flashing all nk.nbf, in win-xp PCs, ........[/size]
WANNA GO OLDER ROMS? READ THIS POST THOROUGHLY ^_^ )
P.S. You can just change / replace the nk.nbf inside the Lazy_Tool folder if you wish to flash other roms....
20080529 added:
Cloudyfa's 19213 clean rom + Lazy_Tool, simple, fast, error free, a new upgrade tool.
[size=+3] Additional RECOVERY steps for 3 colors screen boot-up after flashing...[/size]
a. Force Bootloader Mode MANUALLY (see below Point 4 for How To ), Then flash PVtemp or NVID for prophet( P.S. the boot up screen will be changed to Qtek...),
b. ( Optional) Use Lazy_Tool to upgrade to WM6.1 (default rom is Cloudyfa's 19213-clean, you may change if you want...)....^_^,
Click to expand...
Click to collapse
20080423 added: Alternative "Lazy_Tool"
some hints ~~
if error persists while upgrading with this tool,
Please ask yourself...
I. did I softreset yet? did I make the Prophet recovery? (remove battery and sim card),
II. will the USB port of my PC currently too heavy loaded?
III. did I restart my PC yet?
IV. any connection related software other than activesync is running?
V. did I try the rear panel USB ports?
V.I is my PC currently too busy?
VI. did I try other USB cable yet?
VII. did I try the force bootloader manually before upgrade?
VIII. Did I hardreset my prophet after new flash(if everything had done but no help~~~~ ) ^_^
**************************************
2008-02-18 added ***
NVID for prophet,
Click to expand...
Click to collapse
HARDspl
(OLD method is at the bottom of this post)
1: "DON'T PANIC",
2: 99.9999% CAN BE RECOVERED BY
DOWNGRADE TO WM5 WITH entering BOOT_LOADER MODE + flashing the PVtemp (old method step 1).
3: IF USB CONNECTION ERRORS, TRY REMOVE BATTERY FOR 1 MINUTE and try again.
4: FORCE BOOTLOADER MODE MANUALLY HOW TO = ....
4a. keep pressing the Commgr button and
4b. in the same time keep picking/sticking the bottom softreset button with stylus for one second,
4c. [size=+2][highlight] THEN ONLY ONLY RELEASE THE STYLUS[/highlight][/size] and wait for the screen
TO CHANGE to the three color screen (bootloader mode),
4d. then release all and go to step 10 below..... !!!
Click to expand...
Click to collapse
(remember to download and prepare all files you needed first, or you may have errors while in the upgrade process)
Click to expand...
Click to collapse
5. Execute the Rom Upgrade Utility (ROMUpdateUtility_NV_G3.exe ( or G4), in the
HardSPL folder that you had downloaded, all activities will only take 2-3 minutes to go and
nothing will be seen in the Prophet screen.
(P.S. if connection Error, NO PANIC, soft reset OR remove battery for half a minute and try again. )
6. after the flash completed, it will restart automatically.
7. done!! in your prophet, nothing will be changed VISIBLY EXCEPT the digits IN the reboot screen !!!!!
and while booting now YOU MUSTBE ABLE TO SEE information like: 2.G3.4PDA (FOR G3 PROPHET) or 2.G4.4PDA (FOR G4 PROPHET)
Prophet Hard SPL isn't yet completed until the SPL shows
"2.G3.4PDA" or "2.G4.4PDA". ^_^ !!!
Alternate way to Flashing / upgrading your Prophet to WM6,
a. ENTER BOOTLOADER (see how to at the upper part of this post) [size=+2]OR [/size]
b. DO THE JUMPSPL...(step 8-9 BELOW) [size=+2](you can force to bootloader mode instead of step 8 to 9)[/size]
8. copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,
9. Execute the SPL.lnk IN THE DEVICE (using the Total Commander is recommended), then you see Prophet in all bright or white screen,
10. Plug back to the USB port ( connect to rear USB panel of the computer - recommended) to the device,
11. Execute the Rom Upgrade Utility to upgrade to your chosen rom
(or put your NK.NBF to the unzipped WM6_Update_Utility folder), all activities will
only take 3-5 minutes, nothing will be seen in the Prophet screen.
12. Finally, after 100%, be patient, just wait, and Prophet will reboot automatically.
13. OF COURSE, after it auto-restart, [size=+2]better one more time HARD-RESET[/size],
ALL will be OKOKOK !!!
[size=+3]Tradition (OLD) method[/size].... (for ROM with OS.nb ),
1. Connect to PC, activesync now OK, Flash with [size=+2]PVtemp[/size] or NVID for prophet for step 1
WHEN FINISH,
2. TOUCH NOTHING, HANDS-UP !!! leave it alone, just don't touch your prophet...... ( WM5 wwe flashing now finished)
3. [size=+2]ACTIVE SYNC WILL POPS UP soon, JUST DON'T TOUCH IT (disregard it) [/size],
4. THEN RUN UPGRADE.BAT from PC to flash to WM6 (should be included in your old ROM package with OS.nb )
5. follow the on screen steps and YOU WILL GET WHAT YOU HAD EXPECTED THEN~~~~~
[size=+2]PLEASE REPLY IF YOU THINK HELPFUL ABOUT THIS MESSAGE !! ^_^ [/size]
Click to expand...
Click to collapse
I`m running Mac, with XP under Parallels. Upgrading Trinity is no problem on his config. But your reciepe include running command window. I cannot connect to the prophet from command window.
Trying to solve this somehow. Thanks for the link.
[UPG]Hard-SPL Unlocker for Topaz (AT&T Pure) - Released! Now New Update to HSPL 2.51!
[SIZE=+3]Hard-SPL Release Time!!!![/SIZE]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
NEWER UPDATE: Hard-SPL 2.51.OliNex! you can update to this if you already have Hard-SPL (1.33.OliNex or 1.83.OliNex). to do the update to 2.51, download attachment update_to_251.zip and simply use customruu or do an SD flash (TOPAIMG.NBH).
UPDATE: Hard-SPL 1.83.OliNex! if you have 1.33.OliNex, strongly recommended to update to this, better compatibility with WM6.5 ROMs. you can update to this in 2 ways:
- simply download new HardSPL package and run it in Automatic mode
- or you can download the attachment "update_to_183.zip" and flash it using CustomRUU. this only works if you already have 1.33.OliNex
preface: okay, it was released only this weekend! but trust me the wait was worth it as it works really great and smooth now!
important: again, don't forget, each user gets 1 license, or perhaps 2-3 on request if needed (which is valid forever and all this works as transparently as possible, so won't be a problem at all), while businesses who need to unlock more devices than that, need to purchase it.
contact us via http://support.htc-unlocks.com (do not PM on XDA!) for requesting 1-2 more devices for private user (free), and if you want to discuss bulk unlocking also contact via http://support.htc-unlocks.com or contact cmonex.
Preparations
0) this package is for Topaz (Touch Diamond2, not the original Diamond1) devices. any TOPA***** accepted currently, as long as we don't see a CDMA or other special release.
1) if you have Vista / Windows 7, WMDC update to 6.1 (or whatever is latest) is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions
read this if unsure how to install Hard-SPL... if you are an experienced user and you just downloaded the HardSPL package and it worked, then cool. but if you run into an issue, then you should read the following!
1) download newest Hard-SPL package from Topaz-HardSPL_V5_00R5.zip attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!! and it must not be in Flight mode (i.e. radio should be on).
3) NEW: internet access is required as the program checks online for updates and license.
4) run Topaz-HardSPL_V5_09R6.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). XP requires Admin logon, and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, allow it please. if the exe fails to run or throws an exception (i.e. crashes), report this in the thread with exact error message/code. if you get an antivirus warning, please ignore it, it contains no harmful code (just used a packer to compress it).
5) follow steps as prompted in the Hard-SPL program. if this is the first run of Hard-SPL on a device after hard reset, you must select Automatic flash mode (the first button in Welcome screen).
notes: you should usually go for Automatic flash mode; the Manual flash option is only to be used as noted below (in NOTE 3 and in troubleshooting section) and you must only attempt the Manual mode if Automatic flash mode or SSPL-Manual.exe already put device in tricolour screen. any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
6) it will ask you to wait while it prepares for the flashing, press OK.
7) now it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred).
8) at this point the device did hopefully went to tricolour screen reporting version as 5.09.C-SSPL, this is the SSPL version, which is temporary. then RUU will instantly launch.
9) some notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
10) SPL flashes, device automatically reboots, job done.
11) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.83.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, do a soft reset while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted here below. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 3: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-Topaz.exe from SSPL-Manual-Topaz.zip attachment in this post, copy it to the device and run it. then once the screen is showing SSPL, run the Hard-SPL package on the PC and you must select Manual flash option. *important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual method.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or topaz customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as it can strictly be used for development and hacking, contact cmonex in PM if you need that one.
NOTE 6: supported OS versions: both 32-bit and 64-bit XP, Vista, Windows 7RC and later. win2000 was untested, and pre-RC win7 (lower than build 7100) is explicitly not supported. also, the program may be unstable or not work on Virtual systems, so it's recommended to try outside Virtual OS softwares. also, version verify: if Hard-SPL package says V509R in first Welcome dialog title (and version 5.09 in About box), it is the latest version, not some crappy beta/old version.
Troubleshooting and Step by Step on reflashing stock SPL are in next post below!
credits
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> concept of EXE program that runs on the PC, Hard-SPL concept, server-side license code and maintaining the licenses.
cmonex -> HSPL package on PC, SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
finally,
[SIZE=+2]Donations are always appreciated, the Hard-SPL program will provide you with a link at the end of the process to make it easier. any little helps!!! Thank you!![/SIZE] - and enjoy!!
Hard-SPL for Topaz - Released!
-continued from first post-
Troubleshooting
firstly:
- read the instructions above.
- read the instructions above.
- read the instructions above.
you've donated and it still doesn't work: if you donated in Manual mode, you didn't enter an IMEI or it was mistyped. if you donate in Automatic mode, that will always work as long as the error message was about the commercial usage. to fix this, please contact us at the support ticket system link and use HardSPL - Paying category!
nothing happens on the device, does not enter tricolour screen mode:
- anyone having problems with the device entering SSPL automatically, you can get SSPL-Manual-Topaz.exe from attachment in this post, copy it to the *device* itself and run it. then once the screen is showing SSPL, run the Hard-SPL package on the PC and select Manual flash option. please do not use Manual flash option for any other purposes.
- please make sure you watch the device screen if it asks about running files (it probably won't, I made sure of that, but just in case, check).
- also you can try unticking advanced usb/network functionality in settings on the device. exact location of this will probably be: start menu / settings / connections / usbtopc applet.
general usb connection error problems
- if you get connection error in RUU after the device goes to x.xx.C-SSPL tricolour screen: make sure device was still synced via USB to the PC at the point of it entering SSPL (the tricolour x.xx.C-SSPL screen) and do not try replugging please, that will probably just crash SSPL.
- it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait a few minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process.
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but device still says "USB" on the tricolour screen, just leave it there and re-run the Hard-SPL package when driver installation finishes - you must use Manual Flash option in such a case.
- finally, you can try disabling antivirus or firewall programs on the PC.
ModelID checking: if SSPL loader says it's for a different model or device, please contact cmonex in PM for testing SPL on that too. check modelid by entering SPL tricolour screen manually and note what it says (TOPA100, or something else). note: currently SSPL accepts any TOPA*****, but if we get notified of an incompatible (CDMA) topaz version, we will instantly modify it to deny those models.
other issues
- if device reports that Enterbootloader.exe fails to run (says missing component or corrupt signature or similar), try a hard reset.
- if device reboots instead of going to SSPL screen (x.xx.C-SSPL), which is very unlikely to happen, then contact us by PM to cmonex. do not PM OliNex user, that is not monitored frequently (and PM's to it are disabled now anyway).
- if none of the above help, read thread for further suggestions, if still nothing, make a post in thread describing all details about the exact situation.
- a new note about Hard-SPL versions: if for some reason you intend to use a stock rom, the Hard-SPL version should match the rom. (for example old 1.8x rom with old Hard-SPL, not 2.51, and so on.) cooked roms shouldn't be an issue.
how to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker attachment, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary, the included one is the 1.33.0000 stock SPL. you can also use 1.83 in attachment to this post (Topaz-StockSPL183_NBH.zip)
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 1.33.0000 (or 1.83.0000), not 1.33.OliNex.
About UPDATES:
-the last release (V5.09) added:
1. SSPL update supports more devices (especially more recent devices that would not update the SPL to Hard-SPL).
2. HardSPL binary is still 1.83.OliNex, should be fully compatible with HTC's WM6.5 RUU's.
NOTE: v5.00 will tell you to update to v5.09! and older than v5.00 will not work, so don't bother with the old versions.
-previous release 1 (V5.00) added:
1. new HardSPL binary, 1.83.OliNex, should be fully compatible with HTC's WM6.5 RUU's.
2. new SSPL binary, supporting more devices
3. fixes; this version will also tell you in future if you need an update for HardSPL.
-previous release 2 (V3.01) fixed the following 2 issues:
1. if you get this error message: "Please make sure the device is still plugged in and synchronized to the PC"
2. if the SPL version did not change to 1.33.OliNex, but stays on 1.33.0000
PS: if you still get any of these problems let us know in the thread! thank you.
Finally, it does come true, and now i may flash any rom that i want.
Great great great thanks to cmonex and olipro, you guys did a great thing to us all.
Just flashed my device with this Official HSPL without any problems (as usual). Thanks Oli/cmonex.
Ohh, Happy day...
Congratulations for your work and Thank you very much!
Just installed HSPL, everything worked fine (Windows Vista x64 SP2). Thank you very much!
Good Job!
Your guys are the best, THX a 1000000000000000000000000000000
Cheerz
Many thx to your both!
Here my first question:
...bootloader mode (tricolour screen!) and verify the screen shows 1.33.OliNex
Click to expand...
Click to collapse
My screen shows only "SPL 1.33.0000" is that right? I believe not . I tried to re flash it but i couldn't do that cause of the 1 license/person "prevention".
Grats on the release! but why no release party?
KyBO said:
Many thx to your both!
Here my first question:
My screen shows only "SPL 1.33.0000" is that right? I believe not . I tried to re flash it but i couldn't do that cause of the 1 license/person "prevention".
Click to expand...
Click to collapse
nah, the license won't be a problem, if you only have 1 device, did you run the Hard-SPL package at all? any errors?
Got it and it worked
Its like making a fancy dinner, so many hours spent designing it, planning it, preparing then 'cooking' it. Only to be eaten in 5 minutes.
HardSPL installed seamlessly and now I can flash on my D2.
Thanks guys/gals.
I have left you a small donation for your hard work.
Aussie
Thanks a lot
I'll try it again
p.s. now its time to get to cooking!
Congratulations for all especially Olinex
good job.
Great！Congratulation！
Thankyou very much！
Good Job!
Thinks!!!!!!!!!!!!!!!!!!!!!!!!
Awesome Job
News came ture.
Say thanks.
Is the _Topaz-HardSPL_V1_01R1.zip infected?
I get the message from Symantec Antivirus of Bloodhound.W32.EP virus.
Anyone else having the issue?
Hi all, I'm new here so this is my first post
I recently saw on Youtube the new WM 6.5 wich rocks, its very cool, and I wand to upgrade my phone to this new version. I currently have the latest offical version that is WM 6.1.
So I have this HTC Touch Dual, or Nike, 16 keys version from Orange, I'm pretty sure its also locked on this network so I need to unlock it as I read this is necessary.
I still have my warranty so I would like to make some sort of backup after all of the system files ( Rom, Radio, etc ) in case I fail to upgrade it.
So I now this may be an annoying question but because I saw many threads with unlocking software and ROMs, can you give me a link to thread where there are steps to backup, unlock and flash WM 6.5 to a Nike.
Thank You
First thing you need to do is hardSPL your phone...
Read this
http://forum.xda-developers.com/showthread.php?t=355730
Be sure to use hardspl-1.15mfg-nike.nbh, later on you can use 1.22
HardSPL doest change anything on your device, but it is needed to flash custom Roms.
I've got a the official Orange Rom that I would upload for you in case you need it at a later stage
keenan316 said:
First thing you need to do is hardSPL your phone...
Read this
http://forum.xda-developers.com/showthread.php?t=355730
Be sure to use hardspl-1.15mfg-nike.nbh, later on you can use 1.22
HardSPL doest change anything on your device, but it is needed to flash custom Roms.
I've got a the official Orange Rom that I would upload for you in case you need it at a later stage
Click to expand...
Click to collapse
I'm trying to use the sspl-1.16-nike as in the instructions, but when I click on it it gives me "The file 'sspl-1.16-nike' cannot be opened. Either is is not signed with a trusted certificate or one of its components cannot be found.....
I tried several times. I removed the card and SIM and at boot it gives me an exact error for some programs that I have installed on the card like SPB keyboard and iContact.
What should I do ?
1. Disable the keylock/password on your phone
2. Download the attached files
3. REMOVE SIM and SD CARDS !!
4. Connect usb cable
5. Make sure either Activesync or WMDC is synced with the device rather then just being connected via usb!
6. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
7. after a few seconds "USB" appears on the display
8. unplug and replug the usb cable
9. Then flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-hardspl-niki directory
10. You should see progress bar on device and be flashed in about 3-5min
Follow this exactly...
* Keep hardspl-1.22-nike-shipped.nbh for later use, I'll tell you when you're finished
God damn Windows Mobile, it doesn't work either way.
Now I tried to put back my SD card and guess what : None if my applications work anymore, even the ones installed on the phones memory like Password Master of iContact, nothing works. What the hell happened with this phone. I have no security lock or passwords, just SIM code but that doesn't matter cause the SIM is out, I don't have card encryption enabled.
Ah, and one more thing, I think it worked the first 2 seconds cause I saw the 4 colors screen popping up after I tried to open sspl-1.16-nike.exe but then the error pops up and it dissapeared.
Yes I waited until the phone was synchronized with ActiveSync.
Backup everything, do a hard reset and try again, this method should work flawless, if it doesnt then there must be some instability coming from your device
Ok I will try as I see its already messed up anyway.
How do I do hard reset ? I know its some sort of pressing some combination of buttons !
P.S : Nevermind, I found out
OK it worked, everything worked fine.
The process reached 100%, the phone restarted and on the PC it gave me Success.
Now what ?
P.S : After the restart the phone entered the Customization mode again, and the Orange stuff started to install again, is that bad ? Does that mean the the hardspl didin't worked ?
turn off the phone and while holding down the camera button, switch it on, that will enter the bootloader and show you hardSpl version..
Post that here...
keenan316 said:
turn off the phone and while holding down the camera button, switch it on, that will enter the bootloader and show you hardSpl version..
Post that here...
Click to expand...
Click to collapse
It says
NIKI100 MFG
SPL-1.15.Hard
CPLD-4
...
..
...
Serial
Alright, that's great, you now have hardSpl installed.
Do you plan on using a different sim card in the phone..? maybe O2 or something, if so you will need to do a CID and security unlock, this is needed for some roms, but not for all of them.
Then lastly you need to flash to a newer radio..
So, first things first, do you plan on using a different SIM..?
keenan316 said:
Alright, that's great, you now have hardSpl installed.
Do you plan on using a different sim card in the phone..? maybe O2 or something, if so you will need to do a CID and security unlock, this is needed for some roms, but not for all of them.
Then lastly you need to flash to a newer radio..
So, first things first, do you plan on using a different SIM..?
Click to expand...
Click to collapse
Great,
No I don't plan on using another SIM
I think I know the radio version
When I start the phone on the Orange splash screen it shows some numbers, among them there is a line wich says :
R: 1.65.29.22
Is that the radio version ?
Ok so let's continue
Anyway I can't thank you enough for helping me with my phone so....Thanks a lot )
I'm glad to be able to help
I felt the exact same way a week ago..
You Radio is fine, I use the same one, usualy if you see a nice rom, the poster will let you know what Radio and hardSpl you need.
So now, you will flash HardSpl 1.22
Just use the guide I posted, but delete hardspl-1.15mfg-nike.nbh from the "flash-hardspl-niki" directory. Copy hardspl-1.22-nike-shipped.nbh back into it and just follow the instructions from here on...
6. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
7. after a few seconds "USB" appears on the display
8. unplug and replug the usb cable
9. Then flash the hardspl-1.22-nike-shipped.nbh by running ROMUpdateUtility.exe from flash-hardspl-niki directory
When you're done, report back again and we'll flash your first rom...
You can choose between Windows Mobile 6.1 and 6.5, but most of the 6.5 roms are pretty slow.
You can try this rom, it's brilliant, but based on 6.1
http://forum.xda-developers.com/showthread.php?t=501147
Use this version for the 16 key hardware keyboard!!!
3G Dialer 16 keys Edition - Salvy.C.83_v3.3.1_16_key
You can install the attached dialer, which is just a dream to use
keenan316 said:
You can choose between Windows Mobile 6.1 and 6.5, but most of the 6.5 roms are pretty slow.
You can try this rom, it's brilliant, but based on 6.1
http://forum.xda-developers.com/showthread.php?t=501147
Use this version for the 16 key hardware keyboard!!!
3G Dialer 16 keys Edition - Salvy.C.83_v3.3.1_16_key
You can install the attached dialer, which is just a dream to use
Click to expand...
Click to collapse
Ok it worked, I started the phone again in boot mode and it shows SPL-1.22.Hard
I really want the new 6.5 version, I have the 6.1 since I bought the phone but I really like the new 6.5 type, the icons, scrollbars and such.
Can you recommend me a very good 6.5 ROM, I really like the slider type desktop, where you have tha phone, calendar, text and you slide the magnifier over the option you want.
That's called manilla or touchflo
That is preinstalled in the rom I linked, along with a bunch of cool things
Try it if you want, but I'll post back in a bit with a link to a 6.5 rom
Or are you talking about Titaniam..?
Link me to a youtube video or something of the one you like..
keenan316 said:
That's called manilla or touchflo
That is preinstalled in the rom I linked, along with a bunch of cool things
Try it if you want, but I'll post back in a bit with a link to a 6.5 rom
Or are you talking about Titaniam..?
Link me to a youtube video or something of the one you like..
Click to expand...
Click to collapse
I have installed the ROM you suggested.
Nice options and nice effects, but I like the WM 6.5 vertical slide thingy, like in this video http://www.youtube.com/watch?v=jFjPVpyGvsk
I wait for you to recommend a good and clean WM 6.5 ROM
P.S : I didn't know there are different "desktops" available with different names, but I find the one in the above youtube clip very handy and simple, as well as the new menu when you press the Start button.
This one should be what you're after
http://forum.xda-developers.com/showthread.php?t=591274
keenan316 said:
This one should be what you're after
http://forum.xda-developers.com/showthread.php?t=591274
Click to expand...
Click to collapse
Whats the difference between the Full and Lite? I want the menu like the Lite has and the keyboard the Full has
I will install Lite and check it out
The Lite version uses Titanium (The one you want)
The Full version uses manilla like the first one you flashed