I was trying to update the Wiki with the SD card flashing procedure. I have tried formating both a 2 GB and a 1 GB card with FAT32, and transferring the renamed .nbh file to it. My bootloader doesn't recognize the image file. I have tried multiple formating process on XP; from file manager, from a DOS command prompt, formatting it on the phone, with no success. I don't care about the 1 GB card, I would just like to get it formatted correctly for this purpose.
For those that have flashed your phone with this method, please respond to this thread with the SD card size, sector and cluster size. And I will try and replicate that with my 1 GB card. Hopefully there is a magic set of parameters.
---------------------
Solution from Post #11:
Ok, my Dell Laptop slot/driver was the problem. With some trial and error, I formatted my 1 GB card on a USB driven SD slot on a Vista machine. It took about a minute to format it with FAT32 and the allocation unit size of should be set 1024 (the default size did not work!).
So here are my parameters:
Partition = 1GB
Sector size = 512
Cluster size = 1024
------------------------------------------
Flashing a phone with a micro SD card
Format a microSD card into FAT32 with an allocation unit/cluster size of 1024 (the default size for a 1 GB would not work, also if it takes only a few seconds to format try formating with some other slot/device. A 1 GB took over a minute to format correctly)
Copy the ROM to flash (xxxxxxxx.nbh) to the root of the microSD
Rename the ROM xxxxxxx.nbh to TITAIMG.nbh
Remove card from the PC and insert your card into the phone.
Force into the boot loader with POWER-CAMERA-RESET, release the reset and hold POWER&CAMERA buttons until the tri-colored screen appears
Follow the instructions and you'll quickly flash your Titan...
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this GPS ROMs) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
Not much help, but I am interested in this also I have tried all of the same methods and can't get mine to recognize the image either.
For documentation sake I have a Kingston 2GB card model#sd-c02g, my card reader in my laptop is Texas Instruments PCIxx12 with driver version 2.0.0.4
just by a card reader none of those programs work wait they do work they format it in 32 but the phone wont pick it up u need to do it on laptop or computer
I haven't had to do this yet, but whenever I'm having issues with partitions and formatting, I always use Gnome Partition Editor: http://gparted.sourceforge.net/
Burn and boot that image, you'll need a card reader - but it should do what you need.
I've always formatted my microSD card in Windows XP with a card reader..
REMEBER FAT32, I know you stated it in your message, but I want to stress it again for whoever reads this in the future...
I then insert the card into the phone and copy the nbh file to the card while it is connected via USB.. I don't know why, I just always have...
Then here comes where I think you are having the problem, I havent tested this but I suspect that it is probably case sensitive.. meaning it must be TITAIMG.nbh....
Also, if you have your windows set to hide file extentions and rename the file to TITAIMG.nbh, you are really renaming the file to TITAIMG.nbh,hbh which of course wont work...
Turn off hide file extentions - Open a File Explore Window - Tools - Folder Options - View Tab - uncheck Hide Fiel Extentions for known types in the white box..
Hope this helps, because flashing from sd card is the only way to go.. I'll never risk flashing via usb ever again and it sooo much faster!
Ok I am retrying this from the top.
1)Put the Sd Card in my card reader
2)Right clicked the drive and selected format
3)Formated with Fat32
4)Copied TITAIMG.NBH to device with USB cable through activesync
5)Booted into bootloader
Results:
Breifly goes to Multicolored bootloader and then breifly flashes Loading Rom, No Image File! Then Returns to multicolored boot loader SPL ver 2.40
Not sure if it matters, but the image filenames in posts #5 and #6 are slightly different...
jjlwork said:
4)Copied TITAIMG.NBH to device with USB cable
Click to expand...
Click to collapse
what do you mean by that? the TITAIMG.nbh file should be placed on the root of the SD card while it is still connected to your PC.
Formating SD card for Flashing
Forgot to mention, I have been trying to format these cards from the SD slot in my DELL D430 Laptop. My troubles may be because of that, I'm just not sure at this point. BTW, the cards do not show up under Disk Management, so that option has not been available to me.
What I was looking for were the key physical parameters of Working SD cards.
How Big? Sector Size? and Cluster Size?
Has someone got a 2 GB or 1 GB card to work?
I did copy it to the device while still connected, that is what I mean by copied with USB cable
SD Card Format
Ok, the Dell Laptop slot/driver was the problem. I got it to work by moving my 1 GB card to one of my HP Vista machines and formating it there. It took about a minute to format it with FAT32 and the allocation unit size of 1024 (the default size did not work!).
So here are my parameters:
Partition = 1GB
Sector size = 512
Cluster size = 1024
Can you guys give me hint how to extract the .nbh file from the Sprint package ?
Thanks
lifeisfun said:
Can you guys give me hint how to extract the .nbh file from the Sprint package ?
Thanks
Click to expand...
Click to collapse
Two methods that I have used;
first and simplest is the pc program WinRAR.
second, is to execute the package and once it has extracted the contents and the flashing utility pops up, go search your hard disk for .nbh files, in this package the file you are interested in is RUU_signed.nbh. Typically, they would be located in a temp folder, that is erased once the program completes.
jjlwork said:
I did copy it to the device while still connected, that is what I mean by copied with USB cable
Click to expand...
Click to collapse
Copy it to the microSD card while it is still in the card reader attached to your PC. If you try copying it from the PC to the microSD card in the phone with the USB cable, it will not work correctly.
So after you format it to FAT32 with the card reader, then copy the nbh file to the microSD card while it is still in the reader. Then take it out and put it in the phone and try it.
tpbklake said:
Copy it to the microSD card while it is still in the card reader attached to your PC. If you try copying it from the PC to the microSD card in the phone with the USB cable, it will not work correctly.
So after you format it to FAT32 with the card reader, then copy the nbh file to the microSD card while it is still in the reader. Then take it out and put it in the phone and try it.
Click to expand...
Click to collapse
I've tried it that way as well. perhaps I have driver issues with the card reader like the above.
rschell said:
Two methods that I have used;
first and simplest is the pc program WinRAR.
second, is to execute the package and once it has extracted the contents and the flashing utility pops up, go search your hard disk for .nbh files, in this package the file you are interested in is RUU_signed.nbh. Typically, they would be located in a temp folder, that is erased once the program completes.
Click to expand...
Click to collapse
I used winRAR it doesn't work . I get error archives not found
Thanks
well i guess i'm a little old school. I have windows XP and used DOS commands to do most of the work. I connected the card reader to the computer, it assigned the drive letter E: to my SD slot. Your computer may assign it another letter, just double click on MY COMPUTER and find out what letter your computer has assigned to your SD slot. Now replace E: with the letter your computer has assigned (ie instead of E: it may be F: )
1.) click START --> RUN --> type (without quotes) "CMD" (hit enter)
a dos prompt window should pop up
2.) type (without the quotes) "Format e: /u /fs:fat32" (hit enter)
hit enter when it asks you to label the volume
3.) you can go back to windows to drag the image file to the newly formatted SD card.
4.) go back into dos and type (without the quotes) "E:" (hit enter)
5.) type (without the quotes) "ren *.nbh TITAIMG.nbh" (hit enter)
PLEASE MAKE SURE YOUR PHONE HAS AT LEAST 50% BATTERY LIFE!!!
rschell said:
Two methods that I have used;
first and simplest is the pc program WinRAR.
second, is to execute the package and once it has extracted the contents and the flashing utility pops up, go search your hard disk for .nbh files, in this package the file you are interested in is RUU_signed.nbh. Typically, they would be located in a temp folder, that is erased once the program completes.
Click to expand...
Click to collapse
I hope people realize that the new SPRINT ROM has both a new RADIO update along with new version of WM6. from my understanding, if you have an older RADIO and try the new WM6 from the new ROM, your phone will NOT work. If you have not updated the RADIO, you may want to flash it w/the old sprint ROM. Regain functionality, then update with the new Sprint ROM using a PC. This will update both your OS and RADIO. I hope this helps.
lifeisfun said:
I used winRAR it doesn't work . I get error archives not found
Thanks
Click to expand...
Click to collapse
what is the file extention of the file you are trying to open with winRAR?
.exe will NOT open with winRAR
.rar, zip, lzh, arc, etc will
hindjew1 said:
.exe will NOT open with winRAR
Click to expand...
Click to collapse
Not entirely true. The .exe files shipped out in the firmware are self-extracting files that CAN be opened with winRAR or 7zip. Right-click on the .exe and the context menu should include an "Extract with winRAR" or "Extract with 7zip" option.
Related
StarTrek SD Card flashing
It is necessary to format your microsd card to FAT32 filesystem!
# Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it in fat32 from your computer using a card reader (in some cases format doesn't work).
# Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / ~MacOS use [cabextract | http://www.kyz.uklinux.net/cabextract.php].
# Rename the .NBH file to *STARIMG.nbh* and copy it to the root folder of your microSD card.
# With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and Camera button at the same time).
# You should see the screen with SD Card searching, then confirm flashing on screen by pressing Softkey.
# Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 25 minutes, so check your battery or connect to charger before the flashing process starts.
~SuperCID devices are able to flash any official NBH image using this method.
Yes it works ... but ... edit NBH files doesnt work too with this methode!!!
edit NBH files doesn't work at all. Because of there is no known method to create properly signed NBH for StarTrek.
i think that 1024 is right signature size, but it is incorrectly signes with any known nbh creating tool
Qtek 8500 dead
I tried to use RUU_STAR100_3.6.252.1_02.67.30_QtekNOR_Ship.exe to upgrade to the latest ROM, but upgrade process was interrupted (reported a communication error about 40% into the process); I was not able to recover via the tool.
The phone only shows the three colour bootloader screen now, with IPL and SPL 3.06.0000.
I tried the SD upgrade method described on this page, but while the phone during power-on process very briefly shows a white screen with "searching for SD card", it only comes back on the 3 colour screen and remains "dead".
Any tips on how I can revive the phone?
when your phone in tri-colour (bootloader) mode, reconnect it to PC, and run upgrade via RUU_STAR100_3.6.252.1_02.67.30_QtekNOR_Ship.exe again
PS. You phone isn't dead)
Qtek 8500 still dead
Thanks for the quick reply Erofish.
I tried the suggested step already, but it fails because the ActiveSync no longer gets established. When I plug in the USB cable in the phone, the word "USB" appears in the bottom-left corner of the three-colour bootloader screen, but the PC doesn't seem to recognise the fact that the phone has connected. The ActiveSync icon stays grey and the RUU_STAR....exe tool reports an "Error 260", indicating it cannot connect to the phone.
I did try another PC also, but no change, so I fear it seems to be a problem with the phone rather than the USB port, ActiveSync or so.
I was hoping that the SD Card flashing would be the alternative solution, but as mentioned above, I can't get that to work
I am now thinking I may have missed something in the process... I formatted the SD Card using FAT32, I copied the .nbh file and renamed it to STARIMG.nbh. I am getting the "searching for SD card" message briefly, but never get to the point where I am asked to confirm the upgrade; the screen just goes to/stays in 3 colour mode.
Whichever method may be best, but any ideas to get the phone working again would be GREATLY appreciated!
Dtroll1, turn off AciveSync, kill the ActiveSync processes or just disable USB connections in Connection settings and try again.
Did as suggested by ronswens, but am again getting the message from the RUU_STAR...exe tool that it can't connect to the SmartPhone (error 260).
Did you name the nbh file STARIMG.nbh in FAT32 sd card? I have tried sd card flashing,when i do have nbh file but cant flash,it shows "Invalid Certificate", so i doubt the nbh file name was wrong.
When my phone dead, i pull off the battery,wait half minute,and the plug in the battery(if i dont do these,i cant go into 3-color), go into 3-color, plug usb cable,and just run RUU,then it will flash, during flashing, ActiveSync keeps gray untill flash over and system boot into WM5.
I saw lot of people said, if you dont get CID unlock,the phone will easily get dead when flashing, and the only way to solve this is to send to repair.
only official NBH files can be flashed via microsd card!
yes, as dtsme said, try to remove battery for minute, and plug it again. Turn on your phone in bootloader mode (hold Record and Camera buttons and press Red Button (power))
when your device will get in bootloader mode, run RUU for your device (if you have Qtek 8500, then use Qtek rom; if you have Cingular 3100/3125, then use Cingular rom; if you have Dopod S300, then use rom for it; e.t.c)
Thanks again. The NBH file I used is an official one.
In any case- I sent the phone back, so problem "solved" for now.
I have the exact same problem as Dtroll1 - locked in three color screen (ipl 3.06.0000, spl 3.06.0000), consistent error 260 when running an updater, and no effect from putting SK_QtekNOR_3.6.252.1_Ship.nbh on a MicroSD as STARIMG.NBH.
Any further ideas?
Can I do this on my O2 Neo?
trz said:
I have the exact same problem as Dtroll1 - locked in three color screen (ipl 3.06.0000, spl 3.06.0000), consistent error 260 when running an updater, and no effect from putting SK_QtekNOR_3.6.252.1_Ship.nbh on a MicroSD as STARIMG.NBH.
Any further ideas?
Click to expand...
Click to collapse
http://rapidshare.com/files/56652190/RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship.exe
Here is a link to the OEM QTEK 8500 ROM. IF you are stuck in bootloader, you need follow the SD flashing instructions exactly including case sensitive naming of the file STARIMG.nbh. Also check that your card is FAT32 formatted and verify the file name in a DOS window to ensure that windows has not doubled up the .nbh extension
igord said:
Can I do this on my O2 Neo?
Click to expand...
Click to collapse
I think most HTC phones allow you to flash your phone from the card in such a fashion - the thing you have to figure is what to name the file - the name you give it varies from device to device.
Hi
I've to flash my qtek8500 in SD mode because i've played with registry settings and the phons doesn't boot anymore. Could you tell me whioch buttons i have to press to get the bootloader invoked??? Which button is the camaera button and which is the record button???
StefanV3
read the wiki
Hi
Have found which key the camera button is. Its the key on the right side.
Reflashed it with the latest qtek rom and flashed it now back to WM6.0 .
StefanV3
Dtroll1 said:
Thanks for the quick reply Erofish.
I tried the suggested step already, but it fails because the ActiveSync no longer gets established. When I plug in the USB cable in the phone, the word "USB" appears in the bottom-left corner of the three-colour bootloader screen, but the PC doesn't seem to recognise the fact that the phone has connected. The ActiveSync icon stays grey and the RUU_STAR....exe tool reports an "Error 260", indicating it cannot connect to the phone.
I did try another PC also, but no change, so I fear it seems to be a problem with the phone rather than the USB port, ActiveSync or so.
I was hoping that the SD Card flashing would be the alternative solution, but as mentioned above, I can't get that to work
I am now thinking I may have missed something in the process... I formatted the SD Card using FAT32, I copied the .nbh file and renamed it to STARIMG.nbh. I am getting the "searching for SD card" message briefly, but never get to the point where I am asked to confirm the upgrade; the screen just goes to/stays in 3 colour mode.
Whichever method may be best, but any ideas to get the phone working again would be GREATLY appreciated!
Click to expand...
Click to collapse
I know this is a little too late... but it sounds like your SD card is too slow. For anyone else that has the same problem, make a small 100mb partition on the SD card and place your NBH file there. This will make it so that the bootloader sees the file before it moves on to the regular bootloader.
ivanmmj said:
I know this is a little too late... but it sounds like your SD card is too slow. For anyone else that has the same problem, make a small 100mb partition on the SD card and place your NBH file there. This will make it so that the bootloader sees the file before it moves on to the regular bootloader.
Click to expand...
Click to collapse
I just tried this trying to save a phone it did not work
I have a rom kitchen that can cook roms for startek. I am going to try to make a rom today with all the info I have found so far. My 3125 is scrap to me so if I brick it I don't care. Wish me luck I'll keep you all posted.
Just a little update, super CID unlocked the phone and have been able to manipulate some files. Attempted flashing an os.bin from typhoon but phone would no longer boot. Retrying, thought bricked device but no. I'll update as I make progress.
sledwrecker said:
Just a little update, super CID unlocked the phone and have been able to manipulate some files. Attempted flashing an os.bin from typhoon but phone would no longer boot. Retrying, thought bricked device but no. I'll update as I make progress.
Click to expand...
Click to collapse
Sledwrecker, thanks for taking the initiative on this. I also have a dormant QTEK 8500 when you get a little further along and need another tester. Let me know, I'm up for it.
Well seems as though I have bricked this turd.... I am locked in bootloader I can't recover from SD fallowing all the steps I have found around here.
Trying to D/L the qtek rom now maybe that will work.
I can't get the phone to connect to pc in bootloader mode. Phone enters bootloader, I plug in USB and it shows "USB" on the bottom left but I can't see the phone through MTTY or throught the RUU setup.
I'll update if I figure this out.
Prepare your SD card with the OEM ROM per this method and this should (hopefully) unbrick your device. Please report back so I can also know if it works in this situation. Thanks!
From the WIKI: StarTrek SD Card flashing
It is necessary to format your microsd card to FAT32 filesystem!
# Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it in fat32 from your computer using a card reader (in some cases format doesn't work).
# Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / ~MacOS use [cabextract | http://www.kyz.uklinux.net/cabextract.php].
# Rename the .NBH file to *STARIMG.nbh* and copy it to the root folder of your microSD card.
# With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and Camera button at the same time).
# You should see the screen with SD Card searching, then confirm flashing on screen by pressing Softkey.
# Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 25 minutes, so check your battery or connect to charger before the flashing process starts.
~SuperCID devices are able to flash any official NBH image using this method.
I've tried this several times with the english nk.nbh from HTC's american rom and the CWS rom as well.
1. Extract RUU_STAR100_4.1.502.5_02.79.30_CWS_SHIP.exe
2. rename .nbh file to STARIMG.nbh
3. format "my" 1 gig micro SD card FAT32
4. copy STARIMG.nbh to MicroSD card
5. Insert MicroSD card into STarTrek
6. Power on in bootloader mode holding camera and voice record then pressing power.
7. White screen with blue text "searching for SD card"
8. Tri-Color Boot loader....
Never finds / Sees the SD card
PC sees MicroSD card just fine.
Also, as mentioned above I can't get the phone to connect via USB and bootloader either.
Here is what I KNOW I did "wrong" possibly....
1. I was in MTTY trying to upload a WM6 os.bin to the startack.
2. Ran set 32
3. It found device "ok"
4. lnbs os.bin
5. it did a format and copy
6. restarted phone
7. Nothing.......
8. Hard reset ........
9. Nothing
10. camera, voice record, power = bootloader... Works..
This is where I am at. Like I said I jsut want to get a WM6 rom working if the phone is done the oh well. I am here to help.
Try this
If you want to connect in bootloader and you see the usb connection try the following:
In Activesync, unckeck the Alloy USB connections box.
Remove the device entry from control pannel under mobile devices
plug in the device to USB
Run the enableRAPI program to try to re-establish communications
Here is also a rapidshare link to the latest OFFICIAL WWE ROM for WM5 QTEK 8500. Try it as RUU after the above, if that does not work, extract the contents and try the SD flash again. My gut says if you can get to bootloader, you haven't bricked it yet.
http://rapidshare.com/files/56652190/RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship.exe.html
You said
*Remove the device entry from control pannel under mobile devices
Can you be specific, I can't figure that part out? asside from removing the device entry I've done everything else.
When I try to run the enablerapi it just sits at a blank cmd prompt?
Still no luck get the 260 error when running the RUU
Start>Control Pannel>System>Device manager>Portable Devices>(Windows mobile-based device)
Remove whatever device looks like StarTrk or WM Smartphone
Well I went through device manager and can't find any reference to mobile device or startrek. still can't get the phone to connect.
SD card flashing still did not work even using the .nbh from the rapidshare link above.
When the phone first goes into bootloader it says searching for SD for about 1 second then goes to tri color screen. it's as if it doesn't see the SD card at all.
When in bootloader if I plug in the usb cable I get the little USB down in the bottom but I can't get the enable rapi to work. It just hangs or sits at a cmd propmpt
Sounds like we need to get the SD flashing to recognize your card,
Let me walk through the process with my working QTEK and the same ROM I posted to Rapidshare, then we can compare notes again.
EDIT: By the way, My IPL/SPL show 3.06.0000 and the USB connection does link when attached to my PC (Vista).
SD Flashes OK
Well, I found only a few contentious points with the SD flashing guide:
1) VERY CLEARLY states you must format for FAT32
I had to buy a new microSD for this test. It came standard in FAT16 not FAT32. Took quite some time to format it.
2) Extracted the .nbh file using WinRAR version 3.7
3) Rename the file STARIMG.nbh in CAPS as shown. This was the only file on the card and was in the root directory
4) when installing the microSD, it was necessary to put my SIM card in to keep the SD located properly.
The rest went as expected without fault.
Dude you are my personal hero.
I got it unbricked or fixed using your method.
Here is what I did EXACTLY so maybe this will help someone else.
1. Take 1 gig Kingston MicroSD card
2. Put it in SD sleave and Plug into Computers SD card reader
3. Open Disk Management by right click on my computer then "manage"
4. Selected Removable Disk
5. Format as FAT32, Cluster size = 512 and NO QUICK FORMAT and NO Volume Name
6. Extract ship.......*.nbh from official rom RUU installer.
7. Rename Ship......*.nbh to STARIMG.nbh
8. Copy to SD card
9. Place MicroSD card in phone
10. Insert SIM
11. Insert Battery Pack
12. Holding camera and voice buttons press and release power on
13. Phone searched for SD card
14. Success Phone found SD card press middle side button to start download from SD.
15. Took less than 10 minutes to complete recovery!!!!!!!!!!!!!!!!
I saw some other threads around with people stuck like I was earlier. Try this it worked for me!
Back to the cooking I'm either going to brick this phone or get WM6 working!!!
THANKS AGAIN!
I love it when a plan comes together! Good luck in the kitchen.
Haven't given up yet.. quickk update.
I've been able to succesfuly extract the WM5 ROM completely.
I've been unable yet to extract a complete nk.nbf from Tornado.
After close comparison looks like tornado is closest to Startrek. It has the same OMAP 850 Proc and architecture was going to port typhoon since it's the 730 and the 850 is basicly the same but faster.
I have got an os.bin tornado WM6, not sure what to do at this point.
----
From what I found if I use the XIP from the WM5 rom then the main drivers, keypad, etc.. should work. in theory..
Can I mesh the os.bin into an .nb file ?
I was consifering pdocwrite.exe to upload it but I need to know how to caluclate the header size. Unsure here.
Can I take the os.bin, convert it to .nb and then mesh it in with a WM5 nk.nbh?
Looking for some suggestions, if there is anything OBVIOUS that I am missing please poitn it out.
Try to contact with Erofich, sp3dev or pof, cause these gays working on this project and use the pdocwrite. So they can tell you how to caluclate the header size.
Also in this thread have some info too:
http://forum.xda-developers.com/showthread.php?t=311776
Windows nb from Typhoon
http://rapidshare.com/files/57065531/windows.nb
Here's a windows.nb we can try if you wish from the Typhoon WM6 ROM in my signature. I know you said the Tornado has similar hardware, but I think the Typhoon is also a close match. This comes from the Typhoon os.bin but I am not 100% certain of the process to make it.
(I do have WM6 working excellently on my Typhoon from this file)
I believe if you replace the WM5 windows.nb with this one from WM6 then recook it, it just may work.
k, giving this a shot
I have nb to nbf for wizard. What do you think will be the best tool to recompile the .nbh?
I'll keep reading on my own for now
Using MTTY to try and flash as 06_os.nb
Getting the fallowing error.
Cmd>lnbs 06_os.nb 0x0 0x2600000
clean up the image temp buffer at 0x8C080000 Length 0x03A00000
MTTYDownloadImage
"06_os.nb"
:F=06_os.nb
start download
S
HAddress A0000000h Length 01B00027h
Start Address out of boundary
checking image header<CE-31><CE-2034088><CE-2034088>
OK, I have been reading wiki, looking at threads...but I onestly dont understand...
I am trying to install from my sd card, but it never catches the file...
I renamed it to HERMING, booted up...and nothing
Do I need a drifrent booloader vercion?
How do I know what I have?
I saw in wiki that it is on settings-device information ....but it wasent there.
Please help!
I want to upgrade to the new WM 6.1
I also tried it with ActiveSync via RUUwrapper.exe
I told it to autodetect my bootloader, but it says It couldnt, and to update in safeboot mode. I did but, the phone asks me to allow a file, it restart and goes to boot screen...then my pc says it has a comunication error.
WIll you please help?
Thanks
fernandosaez said:
OK, I have been reading wiki, looking at threads...but I onestly dont understand...
I am trying to install from my sd card, but it never catches the file...
I renamed it to HERMING, booted up...and nothing
Click to expand...
Click to collapse
You sure you named it correctly?
Per the wiki at http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing:
- Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work) make shure it's formated in fat32 format. As a precaution you might want to check the MicroSD card for file errors. i.e (Properties->Tools->Error Checking)
- Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
- Rename the .NBH file to HERMIMG.nbh and copy it to the root folder of your microSD card.
- With microSD card inserted on the phone, start the bootloader (hold Ok button on left side and POWER button at same time and stick with stylus in RESET on bottom).
Hi xda! I apologize if this has been asked and answered, I promise I tried searching. I also apologize if this is in the wrong forum, I'm quite daft actually. My question to you guys is if you really need a SD adapter when trying to create a gold card for my Legend, or would you be able to accomplish the same things if you have the microsd card in your phone and mount it as storage? Seeing as I would really like to root my phone, but have somehow lost my adapter, it would be great if you could use the phone instead.
Thanks in advance
How to create a GoldCard
This guide explains how to create a GoldCard. A GoldCard is a special SD card which, when inserted into your device, allows you to flash RUU files with a different CID to your own device. For example, if you own a T-Mobile branded device, this will allow you to flash a generic ROM.
Requirements
•Spare microSD card (No bigger than 4GB)
•Windows PC (recommended)
•ADB (part of the tools folder of the SDK, available for download here
•HxD Hex Editor, available for download here
Step by step instructions
•Format the microSD card to FAT32 format.
•Put the microSD card in your device and boot it.
•Ensure you have unzipped the SDK, then open a command prompt to the extract location. Change to the 'tools directory.
•Enter 'adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid' and press enter. You should get a very long number which looks like this: 532600bd227d9c0347329407514d5402.
•Visit this page, paste in your number and reverse it. In our example the result would be 00544d5107943247039c7d22bd002653.
•Visit this page, enter your reversed number and create your goldcard image, which will be e-mailed to you.
•Open the HxD hex editor. If you are using Windows Vista or Windows 7, you must run the application as administrator.
•Go to the 'Extra' menu and select 'Open Disk'. Under physical disk, select Removable Disk (your microSD card), uncheck 'Open as Readonly' and click OK. Note that you should select physical disk NOT the logical disk. This is important!
•Go to the 'Extra' menu again and select 'Open Disk Image'. Open the goldcard image that you received by email.
•You should now have two tabs - one is your removable disk, the other is your goldcard image. Press OK when prompted for 'Sector Size' (selecting 512 (Hard disks/Floppy disks)) and click OK.
•Click on the goldcard image tab. Go to the 'Edit' menu, choose 'Select All' then select the 'Edit' menu again and select 'Copy'.
•Click on the 'Removable Disk' tab. Highlight offset (line) 00000000 to offset (line) 00000170 (including the 00000170 line), then click on the 'Edit' menu and select 'Paste Write'.
•Click on the 'File' menu and select 'Save', accepting the warning.
You now have a goldcard!
Source: Android @ MoDaCo Forum
So basically there's no difference between using a SD adapter and not (i'm refering to theunlockr guide which is basically the same as far as i can tell, but they really emphasize the sd adapter)? Also, what happens if you use a microsd card that is bigger than 4 gb, say 8 gb in my case?
here is a guide I posted a while back. Relatively easy way for creating a Goldcard.
http://forum.xda-developers.com/showthread.php?t=823625
ishan_rulz said:
here is a guide I posted a while back. Relatively easy way for creating a Goldcard.
http://forum.xda-developers.com/showthread.php?t=823625
Click to expand...
Click to collapse
It seems brilliant, but I get an error: Object reference not set to an instance or an object... or somesuch message.. Why ?
EDIT: Okay, I figured it out. You have to change the phone from just charging to mount as disk drive so you can choose it from the dropdown menu "HTC MMC".
You guys just made my freaking day. Thanks!!
ive done every root method and still nothing can someone help
Quote:
Originally Posted by Indirect
...
1. Setup SDCard
Using a new SDCard (not one you have info stored on) make a new MSDOS partition table and add a 50 MB FAT32 partition as the first primary partition. Then make sure you enable to boot and lda flags.
Any SDCARD larger than 50 MB should work but I used an extra 2GB laying around. You can add other partitions to the card if you want, but it is not necessary to allocate the entire card. Any added partitions would need to be manually mounted on your Nook anyway.
I used GParted on my Ubuntu machine to do this but any formating tool should work.
2. Copy Files onto SDCard
You can grab the files I used here:
http://www.mediafire.com/?dr6bqau194389te
Just UnZip the files directly to the root of the boot partition you created above (make sure flashing_boot.img, u-boot.bin, and boot.img are on the root not the folder SDCARD)
3. Insert SDCARD into NT
Now, with your NT powered off, eject the SDCARD you just created from your computer and insert it into the tablet. Then just turn it on and VOLA! You should now be in CWM!
Symptoms:
With the SDcard (from above) inserted and the NT powered on, the NT shows a black screen for about 3 minutes, and then boots the internal memory.
Removing MLO from the SDcard causes normal NT internal memory booting, so clearly the NT boot process is looking at the correct place on the SDcard (note that the MLO for 1.4.0 and 1.4.1 are identical).
So, unless I am doing something really stupid, there's something different between the two NTs I've owned. Note that "bauwks" had a problem booting from the SDcard, unless he had the USB cable connected, but others have not seen that symptom.
I rooted my NT 16GB by following this post and it worked well:
http://forum.xda-developers.com/showthread.php?t=1798439
Penguin101 said:
I rooted my NT 16GB by following this post and it worked well:
http://forum.xda-developers.com/showthread.php?t=1798439
Click to expand...
Click to collapse
thamks for the rely but ive tried that already
So you wrote all the files you unzipped from the download to the sdcsrd, inserted the SD into your Nook and rebooted...do you get the box when you reboot?
Just checking, you're holding down both the power button and "n" button when powering on the tablet?
NikkieL
Sent from my Barnes & Noble Nook Tablet using xda premium
This is too complicated, really.
Just got a used NT16. Previous owner factory restored. Downloaded img file from:
[SD Root] Make 16 or 8GB Nook Tablet Root SD Cards by Albert Wertz [SDNT16or8gbV4.7]
No instructions on how to mount image to SD card for Mac (it says just google it...)
Google did not turn up a clear result.
So I finally Googled the right query: how to burn an ISO on a USB drive on Mac OS X
And in turn gave me this - how to mount the image:
"Directly from the Ubuntu download page (my formatting):
Download the desired file
Open the Terminal (in /Applications/Utilities/ or query Terminal in Spotlight)
Convert the .iso file to .img using the convert option of hdiutil (e.g., hdiutil convert -format UDRW -o ~/path/to/target.img ~/path/to/ubuntu.iso)
Note: OS X tends to put the .dmg ending on the output file automatically. Remove the .dmg extension as necessary, mv ~/path/to/target.img{.dmg,}
Run diskutil list to get the current list of devices
Insert your flash media
Run diskutil list again and determine the device node assigned to your flash media (e.g. /dev/disk2)
Run diskutil unmountDisk /dev/diskN (replace N with the disk number from the last command; in the previous example, N would be 2)
Execute sudo dd if=/path/to/downloaded.img of=/dev/rdiskN bs=1m (replace /path/to/downloaded.img with the path where the image file is located; for example, ./ubuntu.img or ./ubuntu.dmg).
Using /dev/rdisk instead of /dev/disk may be faster.
If you see the error dd: Invalid number '1m', you are using GNU dd. Use the same command but replace bs=1m with bs=1M.
If you see the error dd: /dev/diskN: Resource busy, make sure the disk is not in use. Start the 'Disk Utility.app' and unmount (don't eject) the drive.
Run diskutil eject /dev/diskN and remove your flash media when the command completes
Restart your Mac and press Alt while the Mac is restarting to choose the USB stick"
So.........
I followed the instructions to a tee. I am using a 128 MB SanDisk micro SD card.
I inserted the card in my Nook and powered it off. Put the USB cable in and after many minutes the Nook turned on. All it did was power on like normal. Once, I removed the SD card while nothing was happening (waiting for boot). Intermittently (as a result?), I was unable to turn Nook on at all, thinking it was bricked. So, I tried the SD card again, and again after several minutes it turned on. Have removed the card now and Nook works like normal again.
So, I have a 16GB Nook Tablet with 1.4.3 and would like to root it AND flash Android which may require who knows how many sd cards and various recovery modules. I would like to say I love learning how to do all of this, except these instructions are always written by developers FOR developers. Perfect example is the Bishop of Technology. One page leads to another and then another. There is no definitive answer to be found on his site. My favorite part is where he says "now take out the boot card and insert ("vague") custom ROM. And then says, now you might want to backup (using CWM). This is all on the page for installing Jellybean on 1.4.3. The whole page is a mish-mash of vagueness and redirection. That is why I tried installing directly from XDA instead.
But, like I said, I was unsuccessful. And I'm not willing to risk trial and error or spend another four hours digging around trying to find the meaning of every instruction. How hard is it to go into a bit more detail and include links every time appropriate. (insert custom ROM - this is vague and no link is shown for downloading the custom ROM.)
Should I get a 2GB sd card so I can install 142 (500MB) first?
Maybe rdisk was to fast and corrupted the image?
Maybe try this. http://forum.xda-developers.com/showthread.php?t=1494367
Sent from my Barnes & Noble Nook Tablet using Tapatalk