http://www.invisibleshield.com/smartphone/htc/touch-cruise.php
Shame it isn't listed for the Orbit 2.
I have been using one on my Ipod touch and it really is excellent and feels right for touch screen.
I once got an Invisible Shield for my 750 and returned it. The material felt very sticky and grainy and I felt it more suited to smartphone(non-touch) devices.
I have ordered one and am waiting for to apply. Having browsed in Kaiser and Elf forum that the Shield is good for protection against scratch. There are posts said that it is quite tacky while some others claimed there is no problem for stylus using.
if you have the full bodyshield wont u lose the rub feeling on the back?
Aleemz said:
http://www.invisibleshield.com/smartphone/htc/touch-cruise.php
Shame it isn't listed for the Orbit 2.
Click to expand...
Click to collapse
I've got one on my IPOD, and it does great. However, I'm not sure it would be a good fit for the TC. They are a bit "tacky", so I don't think that it would work well. I do recommend that you get one for anything that's not touch screen though. I think that the full body version would actually make the device a bit easier to hold. My 8125 felt more secure in my hand with the Invisible shield on than the TC does with it's rubberized back.
One thing to note, the whole body shield on my 8125 eventually got dirty around the edges and I couldn't get it cleaned. This was mostly around the areas that were getting the most abuse though. I eventually took those pieces off since they wouldn't stick anyway.
I'm waiting/hoping for Boxwave to come come out with their screen savers for the TC. I've got one on my old Cingular 8125, and it fits great (almost a perfect fit..no discernable gap around the edges). And they are touch friendly also. They have a "Krystal" clear version, which I'm using, and one that's supposed to help with glare. I don't use it cause I think it distorts the picture some.
angler said:
I have ordered one and am waiting for to apply. Having browsed in Kaiser and Elf forum that the Shield is good for protection against scratch. There are posts said that it is quite tacky while some others claimed there is no problem for stylus using.
Click to expand...
Click to collapse
Can you please put a review here, when you've got it?
The cutouts:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I actually bought the kit as well. Currently I am using the martin fields screen protector and its looking and working great.
I have 1 concern with the invisible shield, the solution spray.
Do you guys feel comfortable getting a liquid onto your device. Am I missing something here. You are supposed to spray your device and spray the shield with this solution as part of the process of applying it and pulling out all the bubbles.
I really dont feel comfortable spraying a liquid on an expensive device.
Your thoughts on this.
darkazally said:
I actually bought the kit as well. Currently I am using the martin fields screen protector and its looking and working great.
I have 1 concern with the invisible shield, the solution spray.
Do you guys feel comfortable getting a liquid onto your device. Am I missing something here. You are supposed to spray your device and spray the shield with this solution as part of the process of applying it and pulling out all the bubbles.
I really dont feel comfortable spraying a liquid on an expensive device.
Your thoughts on this.
Click to expand...
Click to collapse
you spray the liquid on the skin/shield... i've used their products on just about every PPC/Smartphone i've had in the past 2 years without any problems... unfortunately, they don't have a shield for the O2 Orbit 2 version (yet).
Great thread! I desperately want an Invisible Shield to protect my entire Cruise, but I also desperately don't want to sacrifice too much TouchFLO performance when using application such a TouchPal, Tengo Thumb, etc.
Would anyone with an Invisible Shield be able to comment on how realistic (or otherwise) the following video would be with one installed?
http://www.youtube.com/watch?v=8yTN4wC_ml8
I think a video is the best way to objectively judge how badly the sensitivity problem might affect some people and not others (youTube certainly helped me understand with video driver/TomTom problem).
I have had the Invisible Shield on my Touch Cruise for a couple of days now. I got the full body which does a pretty good job of covering it. It does not cover the bottom area where the usb port and mic goes. I don't know why they forgot this area but I am happy with it. I usually use a stylus with letter recognition and the only thing I have noticed is for opening the cube I have to press a little harder. I tried like in the video and it works that way. I would try it you have nothing to lose they have a 30 money back guarantee. I use it on several devices and I am happy with it.
mpf54 said:
I have had the Invisible Shield on my Touch Cruise for a couple of days now... I tried like in the video and it works that way.
Click to expand...
Click to collapse
Excellent, thank you so much for the feedback, mpf54!
Did you notice any problems at all with the Cruise recognizing all of your finger taps after applying the Invisible Shield? Or were you able to type at a similar speed as before you applied the shield?
I use a stylus usually. There was a little getting used to it being covered. But all that was is I have to press a little harder. I like it.
Well I got my shield and was very excited to try it out on my TC. Directions are pretty straight forward so you think its going to be simple, wrong. After 30 minutes I had only installed the back piece and it looked really bad. The sides are almost impossible to line up perfect and seem a tad bit short in width. After using a lamp, blowdryer, and tongs I finised putting all the pieces on the device. The instructions say to allow 24 hours so that the pieces attach to the device. I finished at 7pm and let it set till 7am the next morning. I must admit the next day the device looked much better then the night before. I was excited to test out my device then noticed after all the precautions I took there was dust underneath right in the middle of the screen. Then I noticed that the bottom part of the device is not protected. I decided to take advantage of the 30 day refund policy and am going to send it back. I think that for this device the pieces are just to difficult to align and a tad bit off. I love invisible shield products I have one on my ipod, but for the TC I do not recommend unless you are a very meticulous and attention orientated person.
While I will admit is is knid of a pain to put on the full body. I am happy with mine. It took several days for it to look really good but it does.
turcomora said:
I think that for this device the pieces are just to difficult to align and a tad bit off. I love invisible shield products I have one on my ipod, but for the TC I do not recommend unless you are a very meticulous and attention orientated person.
Click to expand...
Click to collapse
Just wanted to hear this. I was hesitate to buy one or not. Now i know: i won't
eami said:
Just wanted to hear this. I was hesitate to buy one or not. Now i know: i won't
Click to expand...
Click to collapse
It is a pain to put on the full body but all you really need is the screen cover. I think this is the best one you can get. It took a a while to put it all on but it looks gook and the protection is great.
Bought myself an Invisible Shield screen cover and I must admit I'm pretty satisfied. Better than the original screen cover. Much less fingerprints (plus it's much more easier to get rid of them) and although it takes some time to get used to it, the overall perception is good. Would recommend it.
mpf54 said:
It is a pain to put on the full body but all you really need is the screen cover. I think this is the best one you can get. It took a a while to put it all on but it looks gook and the protection is great.
Click to expand...
Click to collapse
At the moment i'm using a brando metal case. Do you think inv.shield can give the same protection to the screen? I've watched almost all videos on youtube about inv.shield and never saw any video that tried to test a PDA-phone touch screen in the same way as we can see on iPod at the official video. I'm pretty sure an ipode screen (covered by plexy) it much more stronger than an "avarage" touch screen. So those videos will never be a good example for us. By the way... have you seen the new case-mate case for iPhone yet? I really want a cover like that. I hope those guys will make for Polaris too
Related
When i got my ZAGG Invisible Shield 4 my original unbranded TP2 i made this thread
http://forum.xda-developers.com/showthread.php?t=559420
Today i post photos taken by me for my phone with the Invisible Shield on AFTER 2 MONTHS OF USAGE
NB. I peeled it off after taking those photos.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I post the last photo showing the original screen protector on my phone only to prove that i installed my screen protector by myself without a single air bubble up to my friends can't get that there is a protector on my screen and what happened with the Invisible Shield was not due to lake of experience
if you are going to buy Invisible Shield u have to know:
Invisible Shield Disadvantages
1-it is not 4 ur phone.
2-it collects dirts.
3-it peels off.
all of that = UGLY
The only advantage 4 me : it makes ur phone less slippery in ur grip ( BUT to consider to buy on every month )
I have a TP2 with a shield on it. The Zagg Corporation is based in SLC, Utah which is very close to me. I have a shield on all of my things and it is one of the best products ever made. You or whoever put that on does not know what they are doing! FYI the shield has a lifetime warranty. You do not keep buying it!
You cant be serious. Do you sell the generics on ebay?? There has to be more to this because the cuts are insanely worng on that thing!! You sell the generics on ebay and are looking to boost sales? Thats all i can figure
Anyways, was going to actualy order 2 of those for the tilt 2's but now i need to do a little more research. By the looks of it, it seems you are very rough with your phone, but thats not really what this is about. Bubble wrap might be a better wrap for you LOL
Anyone else with the product - IS IT really cut as bad as THAT ????
Nope.
I've had my shield for two months so far and it doesn't look anything like this. First of all it was cut ok - it fits my unbranded TP2 precisely. Second - I haven't got a single bubble, only few little marks in places where phone has been hit hard. And I'm not writing this because I'm a Zagg fan - I'm not. I'll be changing the whole phone casing for black/red in some time and I'd like to try Bodyguardz now.
I have the budyguardz on my Tilt it turn to yellowish after 3 months.
I just purchased this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280410139530&ssPageName=STRK:MEWNX:IT for my Tilt 2.
It stated that it will not change color over time.
Hopefully it is true.
I have had multiple full body invisa shields for multiple phones (tilt, iphone,fuze) and I have NEVER had one look like this after 2 weeks. That looks more like what mine have looked like after about 8 months. You obviously did a HORRIBLE job applying this to your phone. Where did you purchase yours? Mine fits just as it should. Anyone thinking about purchasing one please disregard this "review" of the product. My Fuze looks just as good as it did on the day I bought it after switching to my Tilt2 and removing the old skin.
In wrong place
:Sorry my post was in wrong place it should be in Rhodium accessories forum please Moderators send it to its correct one
Reefermattness said:
I have had multiple full body invisa shields for multiple phones (tilt, iphone,fuze) and I have NEVER had one look like this after 2 weeks. That looks more like what mine have looked like after about 8 months. You obviously did a HORRIBLE job applying this to your phone. Where did you purchase yours? Mine fits just as it should. Anyone thinking about purchasing one please disregard this "review" of the product. My Fuze looks just as good as it did on the day I bought it after switching to my Tilt2 and removing the old skin.
Click to expand...
Click to collapse
-----------------------------------------------------------------
I'm in the Middle East i ordered it from official agent of ZAGG Invisible shield i am very careful with my phone i always put it in the custom leather case that came with i never put it in my pockets without this case, it my be due to the temperature & humidity (high in my country)i rather this one i don't have any explanasion.
Thats how mine looks...
First shield application however.
And thats after.... um since the tp2s first days from telus
I dont mind tho.
Harvz said:
I have the budyguardz on my Tilt it turn to yellowish after 3 months.
I just purchased this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280410139530&ssPageName=STRK:MEWNX:IT for my Tilt 2.
It stated that it will not change color over time.
Hopefully it is true.
Click to expand...
Click to collapse
I bought a ClearProtector (unbranded version) and tried to put it on a Tilt 2, and failed miserably. It was the right shape and size, but try as I might I just could not get the corners to fit correctly.
Interestingly enough, ClearProtector is in Draper, UT which is a suburb of SLC, UT. Maybe they share office space with Zagg?
I had a Mogul for which I bought two Zagg Shields because I had to get warranty refurbs. While I was waiting for my second refurb to come in and before purchasing a third Zagg Shield, an associate of mine told me he never applied a screen protector and never had an issue. So I decided to forgo the protector for the third refurb, figuring I'd probably have to get another along the way.
When I upgraded to the Diamond, I didn't bother. I didn't bother with my new TP2. My assistant put the in-box screen protector on, and his screen is less sensistive than mine and it looks less sharp.
Is the screen protector even necessary? I stash mine on a belt clip holder (nerdy yes, but functional) and I haven't had any issues with scratches and whatnot. Is the screen protector a force of habit or a real necessity?
I, too, was once like you.
I had screen protectors on my Blue Angel, and on my Universal.
I then got my Kaiser and had a screen protector on that, but it peeled one day and I thought I'd try without it. I managed for about 6 weeks but one day it fell out of my in-car holder, and landed screen-first on the runners for the seat in the car.
Result? One big scratch on the screen.
Though the phone still worked and the touchscreen was ok, using a stylus was annoying as it would jump over the scratch and make things less fluid.
If I'd have had a screen protector on there, I would have simply had to replace that.
Since then, I'm sticking to screen protectors. It's a necessary evil.
Man the shield in those pics look disgusting lol~
Thanks for sharing. : )
I have always used them with no issues what so ever,and I live on the ocean front! Also, you can remove it, soak it in water, and reinstall it if you know what you are doing. Patience is a virtue when installing it..... I have had one on my Athena too for 5 years now with no problems either!Mine fits much better than the one that you show..... Later
the cuts on the shield are not perfect but provide enough protection to prevent scratches...I got the all body protector and had the screen protector but cleaned with alcohol and damaged the screen protector...my fault though...I am quite pleased with this product..
How come that
Even if i was harsh with my shield (which is not true )
can any one explain to me why the shield did not fit my phone as i illustrate in the following photos:
in this photo you will see that the shield edges not aligned with the phone lines.
and in this one i try to demonstrate how the shield was more taller than my phone as the red line shows the actual extension of the shield before i cut the excess material i also draw the actual position of the hand strap hole which located over the mini USB (the red one) before i made the ugly (yellow one)
You're kidding, right?
Tha shield material is flexible. I think you pulled too hard while applying to the device.
Mine is ok, though I was hoping for a better shield - the most important places to protect are the corners and the shield does a bad job in protecting them.
Also I use the original screen protector, not the invisible shield one because it's not smooth enough to slide the pen over the screen.
So, invisible shield - which by the way is NOT invisible - does protect the device half, but it is cut well for the form of the device.
I had Zagg full body shield on my TP1 and after a few months it actually started peelign as well. The screen part was actually ok, but the back started peeling just like on the pictures above. So I am not surprised.
i actually waiting on UPS as we speak...!!! I originally ordered a bodygardz, after a week went by, they sent me an email stating they canceled my order, but did not provide an explanation...i called customer service repeatedly....alas, I was greeted w/ voicemail...still havent rcvd a call back...will never do business w/ them again....
hopefully this invisible shield works out for me... :-/
I use invisible shield too for the tp2 and I know its pain in the ass applying it but once done properly and after a week (all bubbles go away) it looks worth it and definitely not like the one on the pictures posted here.
Regards
It's $20 on amazon. The forum won't let me post pictures of it or links.
Does anyone have one, how sturdy is the kickstand, kinda looks a little flimsy to me? Also, can it withstand being dropped, saying on the corner of the phone? I know they make similar cases for other phones, and could only find a couple of youtube videos, but the guy didn't have the phone in the case nor try the kickstand out.
Thanks!
EDIT:
I went out and got it. It does cover the speaker, but it doesn't muffle the sound at all, or make it lower. The case is a pita to take off though, but I'm not planning on taking it off and on. I couldn't find a case that was a hybrid and had a kickstand besides this one. It has a raised edge over the front screen, so you dont have to worry placing it front facing on a surface. The cameras are also sunken into the case, so those will not get scratched from setting it down on it's back. The kickstand works in all three positions. So if you want to charge it while watching a movie you can. The kickstand may feel flimsy, but it locks into place and does the job. It has rubber at the end on it to make sure it stays put.
Overall it's a great shock absorbing case with a kickstand. I had a speck candy shell for my iPhone, and it saved my phone numerous times getting out of cars and trucks with my phone on my lap and forgetting about it and it hits the asphalt, and I'm confident this case will do the same.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Case-Mate-CM015756-Pop-Case-Pack/dp/B0058D286S/ref=sr_1_23?s=wireless&ie=UTF8&qid=1312170043&sr=1-23
I think it looks pretty sweet!!!
This case from CaseMate blocks the speaker on the back
I got this case for free at the place I got my 3D cause they took days to get me a replacement handset. I've used it once and will never use it again. It is hard to put on and a pain in the ass to take off. It latches on to your battery door like a pit bull and contorts it when trying to take it off. The kickstand seems really frail too.
Teedoe3 said:
This case from CaseMate blocks the speaker on the back
Click to expand...
Click to collapse
This case looks good, but its a no go if it covers the speaker. Any way to cut out a piece around the speaker?
tygger said:
This case looks good, but its a no go if it covers the speaker. Any way to cut out a piece around the speaker?
Click to expand...
Click to collapse
I went out and got it. It does cover the speaker, but it doesn't muffle the sound at all, or make it lower. The case is a pita to take off though, but I'm not planning on taking it off and on. I couldn't find a case that was a hybrid and had a kickstand besides this one. It has a raised edge over the front screen, so you dont have to worry placing it front facing on a surface. The cameras are also sunken into the case, so those will not get scratched from setting it down on it's back. The kickstand works in all three positions. So if you want to charge it while watching a movie you can. The kickstand may feel flimsy, but it locks into place and does the job. It has rubber at the end on it to make sure it stays put.
Overall it's a great shock absorbing case with a kickstand. I had a speck candy shell for my iPhone, and it saved my phone numerous times getting out of cars and trucks with my phone on my lap and forgetting about it and it hits the asphalt, and I'm confident this case will do the same.
Didn't know that you could stand it horizontally on both sides. That's neat. Any pics of the kickstand itself?
tygger said:
Didn't know that you could stand it horizontally on both sides. That's neat. Any pics of the kickstand itself?
Click to expand...
Click to collapse
I don't have my camera right now, but here's a picture I found online.
dcfella said:
I got this case for free at the place I got my 3D cause they took days to get me a replacement handset. I've used it once and will never use it again. It is hard to put on and a pain in the ass to take off. It latches on to your battery door like a pit bull and contorts it when trying to take it off. The kickstand seems really frail too.
Click to expand...
Click to collapse
It REALLY was a major pain to take off. Impossible for someone who plans on swapping out batteries a lot. And it also made it extremely difficult to turn the phone on and off via the power switch. I'm sending it back.
I'm going to get this one when I get refunded for the Casemate.
http://www.wirelessground.com/htc-evo-3d-body-glove-vibe-slider-pink.html
ScottSNX said:
It REALLY was a major pain to take off. Impossible for someone who plans on swapping out batteries a lot. And it also made it extremely difficult to turn the phone on and off via the power switch. I'm sending it back.
I'm going to get this one when I get refunded for the Casemate.
http://www.wirelessground.com/htc-evo-3d-body-glove-vibe-slider-pink.html
Click to expand...
Click to collapse
Does this case come in like black or blue?
ahess0815 said:
Does this case come in like black or blue?
Click to expand...
Click to collapse
Not that I'm aware of.
ScottSNX said:
It REALLY was a major pain to take off. Impossible for someone who plans on swapping out batteries a lot. And it also made it extremely difficult to turn the phone on and off via the power switch. I'm sending it back.
I'm going to get this one when I get refunded for the Casemate.
http://www.wirelessground.com/htc-evo-3d-body-glove-vibe-slider-pink.html
Click to expand...
Click to collapse
Yeah, I don't plan on swapping batteries. I rather have something that's going to protect my phone from drops, seeing how I do that a lot when getting out of the car,
i work for sprint so i get to test cases and other stuff out all the time. this case is sweet looking on the phone, although its a little bulky. as stated before on this thread, its a pain in the a** to take off and its a pain to turn on and off via the power switch. the kickstand is very very flimsy as well. too bad cuz this is the sweetest looking case out there with a kickstand.
comes in black also.
I ordered one and it showed up today, I'm definitely a fan. I had one of the cheap snap together cases, and sadly that actually scratched the phone cause it didnt fit tight enough to keep dirt out.. this is so much better. feels so much more solid in my hands, and well protected. swapping batteries.. yeah it makes that a pain. but it's a price I'm willing to pay. And the kickstand seems flimsy but it does the job, I have a hard time believing it'll be a problem cause it's actually so flexible, probably pretty hard to break it.
badluckkyle said:
I went out and got it. It does cover the speaker, but it doesn't muffle the sound at all, or make it lower. The case is a pita to take off though, but I'm not planning on taking it off and on. I couldn't find a case that was a hybrid and had a kickstand besides this one. It has a raised edge over the front screen, so you dont have to worry placing it front facing on a surface. The cameras are also sunken into the case, so those will not get scratched from setting it down on it's back. The kickstand works in all three positions. So if you want to charge it while watching a movie you can. The kickstand may feel flimsy, but it locks into place and does the job. It has rubber at the end on it to make sure it stays put.
Overall it's a great shock absorbing case with a kickstand. I had a speck candy shell for my iPhone, and it saved my phone numerous times getting out of cars and trucks with my phone on my lap and forgetting about it and it hits the asphalt, and I'm confident this case will do the same.
Click to expand...
Click to collapse
Dude how did u get it to stand up with the charging port on top?? Everytime i try the kickstand closes and the phone falls over....
R.I.P. HD2 hello EVO 3D!!
Yes there is. the rubber is very soft on the inside so I got a razor blade and cut the section out rite over the speaker sound is a lot better now.
Sent from my PG86100 using XDA Premium App
You have to open the kickstand up all the way. It almost opens to a 90 degree angle
Sent from my PG86100 using XDA Premium App
jyazzie110 said:
Dude how did u get it to stand up with the charging port on top?? Everytime i try the kickstand closes and the phone falls over....
R.I.P. HD2 hello EVO 3D!!
Click to expand...
Click to collapse
If you open it all the way, it locks, then you're able to stand it on it.
Ive had this case (black) for 2 or 3 weeks. Its very tight on the phone, I like that it fits well and wont fall off. I do usually have to use a butter knife on the bottom (no buttons to ruin) to pry it off. I love it. Ive seen it in Black White and Pink. Got it on ebay for $20. The kick stand is kinda flimsy, but hasnt fallen off yet. Hope this helps.
It is a great case I have had mine for a few weeks the only problem I have with it is it will block a little bit of the 4g signal. I have tested it its not a big issue but is ur signal is week it will kick u off 4g
Sent from my affliction/viper 3vo
Has anyone brought any? I got one but it hasnt came yet.
If you have, would you mind uploading pictures for me to see?
Thanks!!
Planning to buy one but I am more liking the sview covers
Sent from my SM-N900 using Tapatalk
deadlyheart4u said:
Planning to buy one but I am more liking the sview covers
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
I got one. Slippery feel. No shock absorbing material on the inner portion besides the stickers that hold the buttons in place. Kills the signal. But, I like trying out different things. I'll try to post some pics. It's been a while since I posted pics on a forum so hopefully I get this right.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NickSDC said:
I got one. Slippery feel. No shock absorbing material on the inner portion besides the stickers that hold the buttons in place. Kills the signal. But, I like trying out different things. I'll try to post some pics. It's been a while since I posted pics on a forum so hopefully I get this right.
Click to expand...
Click to collapse
thanks but damnit, was really looking forward to it lol.
I had one before, it make the phone a bit heavier. The single is ok but not the GPS , can't trace me when i using the case. So i back to my stock case instead.
pham818 said:
Has anyone brought any? I got one but it hasnt came yet.
If you have, would you mind uploading pictures for me to see?
Thanks!!
Click to expand...
Click to collapse
I bought one from eBay as well, but mine was silver.
It was pretty soft aluminum (but then again, aluminum is a pretty soft metal).
For me, I did not notice any significant difference in signal, maybe download speed dropped about .3~.5 Mbps.
Cell signal was still as great as ever.
I'm on Verizon btw.
http://www.ebay.com/itm/221307977499?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Here is the link to the one I got.
chhappy7 said:
I bought one from eBay as well, but mine was silver.
It was pretty soft aluminum (but then again, aluminum is a pretty soft metal).
For me, I did not notice any significant difference in signal, maybe download speed dropped about .3~.5 Mbps.
Cell signal was still as great as ever.
I'm on Verizon btw.
http://www.ebay.com/itm/221307977499?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Here is the link to the one I got.
Click to expand...
Click to collapse
can you get some pictures up? thanks. thats what i also got. hows the gps signal.
pham818 said:
can you get some pictures up? thanks. thats what i also got. hows the gps signal.
Click to expand...
Click to collapse
I saw no change in any kind of signals, and I use GPS a lot, not necessarily for car, but also for just finding directions and such.
I attached some pictures, but I couldn't take it with my phone in it because I don't have another camera.
Also, the black things on the inside seem to be to prevent scratches from rubbing against the sides, which is a nice touch.
And it closes using screws, and frankly it was great.
But right now, I'm using a Bear Motion bumper instead, because I have to take the case off sometimes even when not home and don't really want to fiddle with the screws. But it feels great and seems solid enough for such a soft metal like aluminum.
chhappy7 said:
I saw no change in any kind of signals, and I use GPS a lot, not necessarily for car, but also for just finding directions and such.
I attached some pictures, but I couldn't take it with my phone in it because I don't have another camera.
Also, the black things on the inside seem to be to prevent scratches from rubbing against the sides, which is a nice touch.
And it closes using screws, and frankly it was great.
But right now, I'm using a Bear Motion bumper instead, because I have to take the case off sometimes even when not home and don't really want to fiddle with the screws. But it feels great and seems solid enough for such a soft metal like aluminum.
Click to expand...
Click to collapse
thanks for the pictures/info on the bear motion. im looking for a bumper becasue i like the feeling of the back on the black note 3. :fingers-crossed:
chhappy7 said:
I saw no change in any kind of signals, and I use GPS a lot, not necessarily for car, but also for just finding directions and such.
I attached some pictures, but I couldn't take it with my phone in it because I don't have another camera.
Also, the black things on the inside seem to be to prevent scratches from rubbing against the sides, which is a nice touch.
And it closes using screws, and frankly it was great.
But right now, I'm using a Bear Motion bumper instead, because I have to take the case off sometimes even when not home and don't really want to fiddle with the screws. But it feels great and seems solid enough for such a soft metal like aluminum.
Click to expand...
Click to collapse
hey what color bear motion did you get? did you get black? is it really black? because on the picture on amazon it looks a little blueish like the spigen neo hybrid metal slate color.
chhappy7 said:
I saw no change in any kind of signals, and I use GPS a lot, not necessarily for car, but also for just finding directions and such.
I attached some pictures, but I couldn't take it with my phone in it because I don't have another camera.
Also, the black things on the inside seem to be to prevent scratches from rubbing against the sides, which is a nice touch.
And it closes using screws, and frankly it was great.
But right now, I'm using a Bear Motion bumper instead, because I have to take the case off sometimes even when not home and don't really want to fiddle with the screws. But it feels great and seems solid enough for such a soft metal like aluminum.
Click to expand...
Click to collapse
I know that you saw no change in signals, and I believe you, but could you please pose the signal strength in decibels (dB)? Thanks.
pham818 said:
hey what color bear motion did you get? did you get black? is it really black? because on the picture on amazon it looks a little blueish like the spigen neo hybrid metal slate color.
Click to expand...
Click to collapse
Yeah. It's black. Well the plasticky part is black but the rubbery part is more of gray
LegoGuy said:
I know that you saw know change in signals, and I believe you, but could you please pose the signal strength in decibels (dB)? Thanks.
Click to expand...
Click to collapse
Here you go!
So the one taken first is without, one after is with.
pham818 said:
thanks for the pictures/info on the bear motion. im looking for a bumper becasue i like the feeling of the back on the black note 3. :fingers-crossed:
Click to expand...
Click to collapse
No problem!
But I'd suggest the Bear Motion one instead of aluminum, because Bear Motion provides (I feel) better protection and will definitely not scratch up the beautiful note 3:good:
chhappy7 said:
No problem!
But I'd suggest the Bear Motion one instead of aluminum, because Bear Motion provides (I feel) better protection and will definitely not scratch up the beautiful note 3:good:
Click to expand...
Click to collapse
yeah i just ordered it
I got one from eBay a few days ago, it looks and feels smart and doesn't make a noticeable difference to the size of my phone, HOWEVER! It's killing my signal.. At least 2 bars, so it's going to have to go.. Shame..
hypnodaz said:
I got one from eBay a few days ago, it looks and feels smart and doesn't make a noticeable difference to the size of my phone, HOWEVER! It's killing my signal.. At least 2 bars, so it's going to have to go.. Shame..
Click to expand...
Click to collapse
i dont get why people are losing so much signal lol
Probably because the one I bought was cheap crap.. £4.99 off eBay..
hypnodaz said:
Probably because the one I bought was cheap crap.. £4.99 off eBay..
Click to expand...
Click to collapse
i got like 3 of them and i dont really notice much of a difference lol. and i got tmobile too ( they're known for horrible signals)
I think it depends on the area with the reception.
Just came across this new case while browsing Amazon to see if any new Idol 3 accessories have been produced. And to my luck there was. I was going to post this in the already created thread about posting which case you already own or want, but I feel creating a new thread informing those of new items would bring different cases/accessories more attention. Available in 10 color combinations and it includes a free tempered glass screen protector. No mention on the hardness scale of it however. Also includes a holster and kickstand. The case also has covers for the headphone jack and charging cable to prevent any dust getting in them. Anyways, here's the case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Protector-Included-Dual-Layered-Belt-clip-Kickstand/dp/B018DCS8LO/ref=sr_1_26?s=wireless&ie=UTF8&qid=1449679288&sr=1-26-spons&keywords=idol+3&psc=1
Ordered the Red/Black combo near the end of the color selections (as they have 2 red/black cases). Hope the red is as dark as it is shown in the images.
I wish there was the same case for 4.7 but they're not going to produce it, only for 5.5
georgearn said:
I wish there was the same case for 4.7 but they're not going to produce it, only for 5.5
Click to expand...
Click to collapse
These cases seem to be newly released. Give it some time for a 4.7" version to be produced. You sound pretty confident though they won't ever release a 4.7 case. Do you know that for a fact?
brian117 said:
These cases seem to be newly released. Give it some time for a 4.7" version to be produced. You sound pretty confident though they won't ever release a 4.7 case. Do you know that for a fact?
Click to expand...
Click to collapse
I wrote them a mail about the 4.7 model. They said it depends on some specific mobile carrier.
georgearn said:
I wrote them a mail about the 4.7 model. They said it depends on some specific mobile carrier.
Click to expand...
Click to collapse
They must think the 4.7 isn't as popular as the 5.5 but that's not true. I'm sure the userbase for 4.7 is just as strong as the 5.5 userbase. The phone being on Cricket shouldn't matter since the phone is available worldwide unlocked. The company must have some agreement with the carrier(s) they produce cases for that limits them.
Hey, I just bought this today....lol. Waiting for it to come in!
kevin6876 said:
Hey, I just bought this today....lol. Waiting for it to come in!
Click to expand...
Click to collapse
Which color did you get? I got my case yesterday and it's great! I feel it's the best case out for the idol 3 in terms of design. I've tried a variety of cases and spent way too much money on the collection I have now because I couldn't find one I would want to use for a daily driver for long. But this case has everything. The built on dust plugs for the headphone jack and charging port is what makes it feel high end.
Good case, but...
I've had the case for a couple days now, I like the look and feel but the buttons don't go in all the way, at least not for my unit. Otherwise it would've been a fantastic case.
brian117 said:
Which color did you get? I got my case yesterday and it's great! I feel it's the best case out for the idol 3 in terms of design. I've tried a variety of cases and spent way too much money on the collection I have now because I couldn't find one I would want to use for a daily driver for long. But this case has everything. The built on dust plugs for the headphone jack and charging port is what makes it feel high end.
Click to expand...
Click to collapse
You didn't end up with the button issues?
I'm currently rocking the black on black version of this thing and its doing the job but I would like dust plugs as my job can get quite dirty.
http://www.amazon.com/gp/aw/d/B017OGE9XQ?psc=1
De3emon said:
You didn't end up with the button issues?
I'm currently rocking the black on black version of this thing and its doing the job but I would like dust plugs as my job can get quite dirty.
http://www.amazon.com/gp/aw/d/B017OGE9XQ?psc=1
Click to expand...
Click to collapse
Nope I didn't end up with the button issues. The buttons are flush with the case so it is somewhat hard to press, but once you get used to the placement it'll be fine. It's not like you need to press with all your force to use a button. It's just like any standard case. Buy it and you'll see for yourself . I own the same black on black version of that case and it did a good job until I found this beauty of a case.
brian117 said:
Nope I didn't end up with the button issues. The buttons are flush with the case so it is somewhat hard to press, but once you get used to the placement it'll be fine. It's not like you need to press with all your force to use a button. It's just like any standard case. Buy it and you'll see for yourself . I own the same black on black version of that case and it did a good job until I found this beauty of a case.
Click to expand...
Click to collapse
So I ordered the Zizo and the quality blows my old case out of the water. The buttons are actually more nice to press with the Zizo and I don't always accidentally change the volume accidentally while at work or working out.
The only thing I didn't like was the four fake screws they put in the back which serve no purpose other than I guess making your phone stable on flat surfaces. They make the phone super slippery when on its back though so I just popped them off pretty easily and tossed them.
Oh, and the case around the headphone jack is raised which will cause problems with larger aux cables for sure. This is a fairly common problem with a lot of cases I find though and I'll probably just cut the case away if I find it bothersome.
I have the all black and love the case! No button issues for me
brian117 said:
Just came across this new case while browsing Amazon to see if any new Idol 3 accessories have been produced. And to my luck there was. I was going to post this in the already created thread about posting which case you already own or want, but I feel creating a new thread informing those of new items would bring different cases/accessories more attention. Available in 10 color combinations and it includes a free tempered glass screen protector. No mention on the hardness scale of it however. Also includes a holster and kickstand. The case also has covers for the headphone jack and charging cable to prevent any dust getting in them. Anyways, here's the case:
http://www.amazon.com/Protector-Included-Dual-Layered-Belt-clip-Kickstand/dp/B018DCS8LO/ref=sr_1_26?s=wireless&ie=UTF8&qid=1449679288&sr=1-26-spons&keywords=idol+3&psc=1
Ordered the Red/Black combo near the end of the color selections (as they have 2 red/black cases). Hope the red is as dark as it is shown in the images.
Click to expand...
Click to collapse
Was the 2nd red one as dark a red as you hoped? It's the one I'm interested in also.
famewolf said:
Was the 2nd red one as dark a red as you hoped? It's the one I'm interested in also.
Click to expand...
Click to collapse
Yep! It looks just like the one pictured, if not a little darker which is perfect.
brian117 said:
Yep! It looks just like the one pictured, if not a little darker which is perfect.
Click to expand...
Click to collapse
Ok maybe I'm just missing the obvious but how do you get it back into it's "holster" after putting the case on it? I can see the clip should snap around it but I'm flexing it pretty hard and it's not sliding in....I don't think I should have to fight with it to get the phone to dock.
famewolf said:
Ok maybe I'm just missing the obvious but how do you get it back into it's "holster" after putting the case on it? I can see the clip should snap around it but I'm flexing it pretty hard and it's not sliding in....I don't think I should have to fight with it to get the phone to dock.
Click to expand...
Click to collapse
I know what you mean. I don't use the holster but for the hell of it tried putting it in the holster to see how it felt and it took a lot of pressure to get it on. On the left side of the case under the power button you'll see 2 black openings which are for the holster. I'd assume to make it easier you insert the left side of the case into the holster first and just pry the phone in completely on the right. Those 2 black openings are for the clips on the holster.
what is the protruded part over the headphone jack for ?
ParishM said:
what is the protruded part over the headphone jack for ?
Click to expand...
Click to collapse
A lanyard strap that's included in the packaging. Never seen the point of keeping a phone on a lanyard so it's of no use for me. You get used to the design of it after a while.
brian117 said:
A lanyard strap that's included in the packaging. Never seen the point of keeping a phone on a lanyard so it's of no use for me. You get used to the design of it after a while.
Click to expand...
Click to collapse
It can also be used to attach a keychain...luckily still fits in the belt holsters I purchased sized to fit the iphone 6+. Tried the holster it comes with..still trying to get used it...easier to use if you remember to turn the screen to face INTO the holder instead of trying to mount it exposed which I was stupidly doing.
So you guys recommend the case? I just seen it the other day, ive been kinda on the fence about getting it since its more expensive and ive been through 3 other cases that ive hated, but i hate not having a case even more... I was wishing for a trident case but i doubt they will bother anymore, so this one looks like my only hope for decent drop protection.
Hello everyone, since this thread was closed, I thought I'd reopen the discussion.
I'm currently waiting for my preorder to ship, but as of right now there is no specified date in Spain (just mid April). So I thought I'd ask you guys:
What do you think of the build quality? Do you see any potential issues in the near future? I saw the video of that guy scratch his G5 body very easily with a box cutter, of course, it's a box cutter! But do any of you think that will actually chip or scratch with normal usage? Like in your pocket, leaving it on the table, in your bag with other things? I do this all the time with my G4, G3, and every other device, but I have never seen such a video that a guy can literally take off the entire layer with little effort.
So people with devices, have any of you noticed or felt like the primer layer is weak or fragile enough to chip, break off, crack or come off by itself with little effort or every day wear? I'm planning on keeping this device for at least a year! (And yes, a case is on its way, but sometimes I do like to move around without a case - after all, these phones are designed without a case in mind...)
Thanks
The coating seems pretty durable, but I always use a skin on the phone so when I go to sell it it's in mint condition when I peel that skin off. I also keep the pocket it rides in free of other objects. I am sure if you took a box cutter to any phone, it would cause damage.
turbodroid said:
The coating seems pretty durable, but I always use a skin on the phone so when I go to sell it it's in mint condition when I peel that skin off. I also keep the pocket it rides in free of other objects. I am sure if you took a box cutter to any phone, it would cause damage.
Click to expand...
Click to collapse
That's good to know. I just felt like in the video it looked like it was very "soft" or malleable. I just wanted to see what actual owners thought about it . I'm excited to get mine!
It's durable so far. been putting in my pocket with keys and no scratches, dents or dings. Dropped twice off the back of my couch last night onto my hard wood floor and my heart skipped a beat - no damage at all.
I prefer no case. The only thing that will really f-up your phone is dust/dirt as it will scratch everything
Sent from my LGLS992 using Tapatalk
There are reports in some threads about small drops and keys dinging and scratching the phone.
With that said, it mostly depends on how it falls. I've heard of people's G4 body/screen cracking from five foot drops onto carpet. I've accidentally tossed mine eight feet in the air and had it land face down on pavement without a scratch, and that was using a Rinke Slim case.
zkyevolved said:
Hello everyone, since this thread was closed, I thought I'd reopen the discussion.
I'm currently waiting for my preorder to ship, but as of right now there is no specified date in Spain (just mid April). So I thought I'd ask you guys:
What do you think of the build quality? Do you see any potential issues in the near future? I saw the video of that guy scratch his G5 body very easily with a box cutter, of course, it's a box cutter! But do any of you think that will actually chip or scratch with normal usage? Like in your pocket, leaving it on the table, in your bag with other things? I do this all the time with my G4, G3, and every other device, but I have never seen such a video that a guy can literally take off the entire layer with little effort.
So people with devices, have any of you noticed or felt like the primer layer is weak or fragile enough to chip, break off, crack or come off by itself with little effort or every day wear? I'm planning on keeping this device for at least a year! (And yes, a case is on its way, but sometimes I do like to move around without a case - after all, these phones are designed without a case in mind...)
Thanks
Click to expand...
Click to collapse
That thread was closed due to op only wanting to troll.
From what I gather you need to intentionally cut into the phone in order to chip. Falls may do it too
Sammae7 said:
There are reports in some threads about small drops and keys dinging and scratching the phone.
With that said, it mostly depends on how it falls. I've heard of people's G4 body/screen cracking from five foot drops onto carpet. I've accidentally tossed mine eight feet in the air and had it land face down on pavement without a scratch, and that was using a Rinke Slim case.
Click to expand...
Click to collapse
PunishedSnake said:
That thread was closed due to op only wanting to troll.
From what I gather you need to intentionally cut into the phone in order to chip. Falls may do it too
Click to expand...
Click to collapse
swazey said:
It's durable so far. been putting in my pocket with keys and no scratches, dents or dings. Dropped twice off the back of my couch last night onto my hard wood floor and my heart skipped a beat - no damage at all.
I prefer no case. The only thing that will really f-up your phone is dust/dirt as it will scratch everything
Sent from my LGLS992 using Tapatalk
Click to expand...
Click to collapse
That's good to know! That man just made it look so soft and malleable I couldn't believe it!
Thanks everyone
Also he was cutting with enough force to pretty badly scratch the aluminum itself, I don't know how you could reasonably expect a coating to do better...
Sent from my LG-H820 using Tapatalk
JNordgren42 said:
Also he was cutting with enough force to pretty badly scratch the aluminum itself, I don't know how you could reasonably expect a coating to do better...
Sent from my LG-H820 using Tapatalk
Click to expand...
Click to collapse
Yea
zkyevolved said:
That's good to know! That man just made it look so soft and malleable I couldn't believe it!
Thanks everyone
Click to expand...
Click to collapse
And just to add, the phone though light has a solid heft to it (if that makes any sense). All of this talk of it being plastic has me fuming. I tapped the back and sides of the phone lightly on my granite counter top and there is no way in hell plastic makes a sound like that. I tried the same with my G3 and there are 2 distinct sounds...
scribbles92 said:
And just to add, the phone though light has a solid heft to it (if that makes any sense). All of this talk of it being plastic has me fuming. I tapped the back and sides of the phone lightly on my granite counter top and there is no way in hell plastic makes a sound like that. I tried the same with my G3 and there are 2 distinct sounds...
Click to expand...
Click to collapse
Not to worry the people who are complaining on it don't and won't ever get one and merely parrot what someone else says. Um is one such
scribbles92 said:
And just to add, the phone though light has a solid heft to it (if that makes any sense). All of this talk of it being plastic has me fuming. I tapped the back and sides of the phone lightly on my granite counter top and there is no way in hell plastic makes a sound like that. I tried the same with my G3 and there are 2 distinct sounds...
Click to expand...
Click to collapse
Haha, very good.
What people i hear are saying is it does not feel like metal in the hand. LG promised, LG lied, we are disappointed, bla, bla....
it would seem that reviewers are adamant we should live in a world where ALL phones are anodised 'premium' flat slabs !!
Some companies beg to differ.
What is so godamn premium about aluminium. Its the cheapest metal to use. Its soft and dents like anything.
zkyevolved said:
That's good to know! That man just made it look so soft and malleable I couldn't believe it!
Thanks everyone
Click to expand...
Click to collapse
Jerry also bent the 6P with his bare hands, don't think it stopped anyone who wanted one
How is the leather back on the G4 holding up after nearly a year. Corners still peeling but never went beyond. The leather changed colour. The back on this is harder than leather.
So I appear to have developed a small chip on the top left side. I have been extremely careful with this phone in every way. Always in an empty pocket and set down carefully. Might have to get it exchanged.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sucks. Yeah its been solid for me so far.
Sent from my LGLS992 using Tapatalk
Just get a cover/case for your phone and if u dont like them dont complain about the chips and scratches. Just common sense you know.
_ray_ said:
Just get a cover/case for your phone and if u dont like them dont complain about the chips and scratches. Just common sense you know.
Click to expand...
Click to collapse
See that's the thing, I didn't coddle my G4. I liked the feel of the leather, and I'm absolutely certain that I have bumped into stuff while it is in my pocket, that's the facts of life. You can't really avoid that. What I saw in another review yesterday was that in 8 days the device began to chip at the bottom where the magic slot is located. That's from normal usage. I'm very inclined to give it a shot! I loved and still love my G4, but I'm worried that the G5 might not hold up past a few months without seriously degrading the build quality [emoji19]
Sent from my SM-G935F using Tapatalk
I hope you're wrong.
My 2 samsungs are very resistant : the Note 1 has felt 3-4 times, and the borders have just a liitle impact on a corner.
The Note 3 et Note 1 's paint are ok since the first day, no scratches, and the screens are ok too, without protection (just flip cover)
Samsung's phone are strong, hoping my future G5 is too :-/
Angie* said:
I hope you're wrong.
My 2 samsungs are very resistant : the Note 1 has felt 3-4 times, and the borders have just a liitle impact on a corner.
The Note 3 et Note 1 's paint are ok since the first day, no scratches, and the screens are ok too, without protection (just flip cover)
Samsung's phone are strong, hoping my future G5 is too :-/
Click to expand...
Click to collapse
Samsung were very strong devices. The last two years have been very fragile if dropped. The S7E I have now feels like I need to keep it in a diaper... I could drop my note, note 2 or 4. LG G4 too! But if the G5 begins to chip soon after... For the love of God! Hopefully what people are saying is true: there is a factory that has issues, but it's one of the three that are producing! So that's good...
I'm keeping my fingers crossed [emoji106]
Sent from my SM-G935F using Tapatalk
me too! ^^
I scratched the silver edge of mine with my nail.. irritates me every time I look at it.