VOIP - Can speak but I can't hear anything. - Advantage X7500, MDA Ameo ROM Development

Hello,
I setup my voip on the PK3.0 rom, its dialing and it almost works. Except that I can not hear anything, I can speak and the other party hears me just fine, but I can not hear them, anyone came across this? What can you recommend to fix this?

bump, still no resolution to this, it works fine one way. But I can't hear anything the other person is talking....
Anyone?

marek101 said:
Hello,
I can speak and the other party hears me just fine, but I can not hear them
Click to expand...
Click to collapse
This isn't going to help much but .... sounds like the perfect setup to me.

Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together

salasbg said:
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
Click to expand...
Click to collapse
I would be very much interested, how would you go about by debugin' this ?

salasbg said:
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
Click to expand...
Click to collapse
Hi!
I start by stating that I finally got it "working"! Yeahh! This "thing" costed me a hard reset and a lot of frustration. Let me write down what I think is the issue/"solution".
I say "working" because it is almost impossible to get the sound out of the Athena, unless you use a bluetooth headset (I haven't tried the wired one) and the supplied Voice Dialer.
To keep it short, for the Athena X7501 here is what you need to do to have "native" VoiP working partially as thought:
Connect the BT headset
Leave the Voice Dialer activated (Cyberon Dialer, provided in the original ROM). That means that the relevant entry in the registry shouldn't be set to '0': HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\LaunchAPEnable
Connect to your VoiP Servce and launch the phone. Now you should see your VoiP provider as agent. Dial the number (Good luck with the ipdialplan.xml) and you see that the Voice Dialer pops-up! Ignore it. The relevant communication port is happily already taken by the VoiP. You hear the sound on your bluetooth Headset. If you like, you can now transfer the sound to the speaker!
To my understanding, after having spent hours on this issue, I think that this is due to a DLL modified by HTC. Don't ask me which one. There is NO registry entry you can play with to solve it, unless you 're really lucky with the DLLs provided. It seems that there was some kind of agreement to make life very difficult to those trying to communicate through VoiP. I personally use VoiP only at home and don't bother too much. Maybe all this is history in the cooked ROM. Let's see.
If you don't need the Voice Dialer, then I suggest you use Fring. It works well both ways. However to use a Bluetooth Headset, you need to deactivate the Voice Dialer in the registry.
I hope this helps.
Rgds
Dod
P.S. The above are applicable to the original US Rom of X7501

There has been a discussion at Skype with respect to 6.1 and Skype failing to work correctly http://forum.skype.com/index.php?showtopic=112059
Maybe this might be of help.

Strange problem. Maybe you can try with software like fring.
Ran it on pk3 without any trouble and now running it with the 6.1 rom and still working fine

Related

questions after upgrading to WM6

1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.

Alternative to Jetware Mobile 1.31

Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
I use BatteryStatus, It can place a (bluetooth, wifi) shortcut on today....
Have a look also to Ilauncher....
With that you can have what ever icon you want on your today....
So bluetooth, wifi, shortcuts to other program ecc.....
You can also edit the icon with your own...
That is a very nice app...
Thanks for the reply but what I am actually looking for is similar to jetware which adds extra profiles to the bluetooth stack not icons, it helps with devices or bluetooth car kits that can read sms etc
Battery status does not actually add anything or extend the bluetooth stack.
I wonder if we can contact the author of the jetware extension to release the source code. He's obviously not doing anything with it anymore.
Top! UP! UP!
Yep UP! i'm also looking for a way of extending the BT stacks functionallity without having to replace the stack itself. Perhaps we really should try to contact the author of jetware
No other app in this world to function like Jetware extension?
Woody_XDA said:
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
Click to expand...
Click to collapse
may i ask why are you looking for a similar one and not use this one?
i am asking 'cose i found myself long time ago that is causing some problems
with the BT communication....do you have the same problems?
In my case there are some minor problems with BT connection and it also does not deliver entire functionallity that i require - like PBAP and other stuff
Same here. It's not finished and the developer just kinda dissapeared two years ago. Sooo we're looking for someone to take over. Someone please take over on this! There could be a lot of money involved. I would pay up to $100 to get this done!
I'm on the case
Also, what is PBAP?
Ok I think I've found everything I need to get started on this. Since I don't have a device to test this with, I need to know what feature you think would be easiest to implement or what feature you want the most. ie: List contacts, list messages, etc.
This way, I can focus on implementing this one thing, and once it's working i'll know i'm on the right track and can move on from there.
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
i'm gonna go try this on my pioneer bluetooth
*update* pocket bluetooth works perfect with my pioneer in-car bt unit.
HI guys
Just wondering does Jetware 1.31 work well enough with car kits? I tried my Polaris with the Alpine KCE-350BT and it doesn't work so am about to test it using Jetware. Just wanted to know do you need to run Jetware each time or just for the initial phone book upload? Once the contacts are uploaded i think it should work properly without running Jetware correct?
Just can't really place anything on the today screen or a shortcut, so interested to hear if there is anything else better.
thanks,
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
this didn't seem to work on my HTC TC.
Anyone else close to a working alternative? I really need something to replace OBEX and use the PBAP format to upload contacts to Alpine car kit.
Are there any registry fixes or does WM6.1 get around the problem as claimed by MS.
Cheers,
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
KeithXP said:
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
Click to expand...
Click to collapse
How do you go about disabling synchro phone profile - is it the same with touch cruise?
I never really 'got' Jetware. Do you just need to send contacts once to the car kit? Also i assume you are meant to toggle bluetooth on/off using the Jetware shortcuts, not the normal bluetooth??
Thanks- i'm going to go bakc to the shop and test it now i've got a 6.1 Rom on, as the OBEX was a problem so perhaps with this turned off in adv. config. it may work (fingers crossed).
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts. The huge plus is that if you use automatic synch, you will get duplicate entries for every phone number held for a given contact. If you use the Jetware Extension to send contacts, you get one entry per contact, with all the numbers correctly identified as mobile, home, work.
Then when you dial, you say the contact name, then 'home' or 'work' etc. If you use voice dialling this is essential, otherwise you have to record every number individually (voice tag "John Doe home", "John Doe work" instead of one tag "John", then "mobile" or "home" when prompted for number type).
I hope that makes sense, but since your message is two weeks old (sorry, haven't been here for a while) you may have it figured out.
AFter all that, it seems the developers at Jetware have given up. They don't respond to email and the link to purchase the software is broken/dead. That's a bummer as I have lost my activation code and just got a new phone....
KeithXP said:
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts.
Click to expand...
Click to collapse
Thanks for the reply - I have never seen this option of 'disable synchro' anywhere on the phone, jetware options or on the car kit interface.
It seems to be working well enough now, but the phone book did get corrupted and couldn't fix it till i paired another phone then mine again. (contacts were mixed up - some first name last name, and didn't show /H or /M for home or mobile etc but seem ok now).
Part of it could be having to be patient with the Alpine BT kit, as it takes a while 'updating' on pairing to copy all the info again. Still doesn't work as fast or as reliably as i'd hoped, but probably good enough. May not have this phone forever, but don't want to get another one yet.
It's a shame they aren't supporting their product any more. Hopefully someone else could improve it or write something better, as the one annoying thing now is that i can't put the phone into sleep mode when i press the button - keeps powering back on to full lit screen, every few mins which wastes the battery as well as distracting when the phone is in the car mount- now i just have to lock the device as a workaround.

VoIP Finally

I have been trying to set up a VoIP client on my Windows Mobile phone for a long time, starting with the HTC Wizard which I could never get to work.
I have finally managed to get a VoIP client with a really nice interface working on several phones that I have tried it on.
I am using ViaTalk as my provider but it should work with any VoIP provider.
It works great (with a slight delay, nothing that I can't live with) on an unlocked HTC Sprint Touch Pro 2, a T-Mobile HD2, a HTC Diamond and an HTC Fuze.
The application is by NCH software out of Australia and it is free to use, or if you want to unlock all of the features of the application, download and register the business edition.
Here is the URL for the download:
http://www.nch.com.au/talk/pocket.html
Or if you would like, PM me and I will be happy to send it to you as an attachment to an email.
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
hecthork said:
wow men! you are amazing! you search better than me xD you have a paid version? or free version?
Click to expand...
Click to collapse
I am using the paid version but the only difference is that it unlocks some additional features that most people proably don't need anyway.
It is not trialware so it has no expiration.
thx you man, i'm trying this app since yesterday; works good!! easy to configurate, i'm using the free version because; i don't have 2 line, i don't use conferente mode... but it will be interesting trying these features xD
How does this app compare to AgePhone?
Hello,
why not to give a try to PortGo !
http://www.portsip.com/softphone.htm
The free version is sufficient and very simple to use, even with several providers (I currently use 2). Skin and language are easy to adapt if necessary (I've made it for French), see also here http://forum.xda-developers.com/showthread.php?t=508715
Dangze
bobzero said:
How does this app compare to AgePhone?
Click to expand...
Click to collapse
I really couldn't tell because I have never tried AgePhone.
I have tried most of the different VoIP clients mentioned throughout this site but I have never been able to get one to work right until I tried this one.
It could be that I am too stupid to configure them right or it could also be that they simply don't work very well, I can't say.
As for PortSIP, I never got it to work right and the developer dropped off line a while back as far as I can remember.
This little VoIP client that I am using has got a clean interphase, it is easy to configure, it does not require any special "helper" apps. so I am happy with it.
Hope that some of you enjoy it too.
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
ardec1 said:
{R^7Z trim]
Only known issue is when the phone goes in to power saver mode it drops the WiFi connection but that should be an easy fix, right now I am simply pressing the power button and it comes right back and the connection is still alive.
Click to expand...
Click to collapse
I have mine set so that the light always stays on until I turn it off(I turn off auto back-light, my preference). So, no issues there. Additionally, I think there is a setting or app that will allow WiFi to run even while the phone sleeps. Or perhaps it is set into a low-power mode until the power key is pressed?
Howto in France ?
It seems great but how could I make it work in France.
My provider (mobile or at home) is SFR.
Thanks in advance to all for your answers.
Setup file attached to original post
I finally got around to attaching the setup file to my original post so it can now be downloaded directly from this site
Hi,
I suggest to please change the title to "Express Talk for WM".
I already tested it on my Ultimate 8502. I can call but can not receive incoming call. It ring but after receiving, it stop ringing with no active call and no sound. Any solution?
thanks
sadat007
After installing Pocket Talk and configuring it I get the message that my handheld device is blocking UDP port no 8000 and 5060. Of course it isn't but I can't make callas. Has anyone had the same problem?
installation unsuccessful
It fails to install for me...
I connect my HTC Mega (Windows Mobile 6.5, moded rom), I start the setup, my phones screen shows the installer but than says "Installation of NCH Swift Sound Pocket Talk.CAB was unsuccessful"
Doesnt matter if I choose MainMemory of StorageCard.. there is plenty of free space on both of them.
Any Ideas? Are there any prerequisites? I checked the NCH forum but couldnt find any help...
PS: trying to install directly from the .cab it leaves on my storage card wont work either
Hi sorry for my bad english, setup doesn't work on my hd2 why???
Franky24 said:
I sincerely don't know the use of that softphone over the built-in VoIP for WinMo (WM65VoIP.cab, ultimate.VOIP.WM6.5.cab - available in several threads here) - except you need 2 lines? Especially as these guys do not use the WinMo address book! I don't want to manually add 600 adresses to any additional phone book.
The above mentioned cabs integrate into WinMo and use WiFi or 3G-connections. The phone rings as ususal and displays who called (from WinMo address book). The call is even entered into WinMo callog (only disadvantage: You don't see if a call was made/received via GSm or VoIP). I use them on my TP2 (WinMo 6.1), HD2 (WinMo 6.5.5) and even had a cab file for HTC Artemis (WinMo 5). All works/worked pretty well
So what's the use of these softphones?
Cheers, Franky
Click to expand...
Click to collapse
Myself some hours ago said:
I'm also using WMVoIP and my phone is enabled by default to use VoIP when wi-fi gets enough data traffic, so I don't need other VoIP apps except for second lined. Usually I switched off the phone radio and whitched on the wifi radio and VoIP wasd enabled as default phone line.
But my problem is now I can use VoIP over 3G at no penalization from my phone provider, and I can't set my phone to use VoIP by default.
Is there a way to set VoIP the first option and phone the second one, using 3G (not wifi) ?
Click to expand...
Click to collapse
Editing: I found this xda-dev's app here: http://forum.xda-developers.com/showthread.php?t=730303 and it works fine with one SIP line, in my Kaiser, even using 3G instead of wifi.
Thanks !
It works fine on my HTC Touch Pro cdma with wm6.1.
But I don't like the fact I can't use my original contact list...
Hey Guys,
Im wondering what would be better for me, Im based in the UK and I want to know if Using a VoIP Service such as Skype or get a Dedicated Phone line put into my address? what do you guys think?
- David Scheme

Use your GPlayer as a regular Cell Phone

A few days ago I bought a device called GMATE ($80), a type of smallcell without display or keyboard which is inserted a normal simcard and communicating via Bluetooth to the Samsung Galaxy Player, which means an application is integrated with android, receiving and making phone calls, and SMS, in addition to allowing internet access GPRS.
It's a perfect combination that increases the possibilities of Our Player
IPhones must be jailbroken, a repo is added to Cydia, and then the Gmate app is installed for the integrated Gmate functionality. How does this work in Android?
In GooglePlay you can download a Gmate aplication that integrates the gadget with your android player (also convert your android phone in a double sim phone) and uses android phone's features like dialer, contacts, or any thirtd party aplication likes rocket Dial.
Received and Make calls donĀ“t need special features, if you uses the Gprs/edge to internet (in places with no WIFI) need to be rooted.
The application is not compatible with my U.S. 5.0 Player.
CreekDirt said:
The application is not compatible with my U.S. 5.0 Player.
Click to expand...
Click to collapse
Go to skyroam webpage and ask for a .apk file, i have Intl 5.0 and working great, sometimes any aplication in GooglePlay seems to be incompatible for my SG player but, on a external apk source works fine.
Dutch 5.0
Thank you for the info! I will definitely buy one if it works in The Netherlands.
That does look interesting.
Anyone using it with the USA version?
Is there something similar that i can connect it to my player or to put it in the galaxy player? So this wey i dony have to worry if i get out of 10 neters or jf i fodget it at home
Sent from my YP-G70 using xda premium
Wow, wonderful find. I was looking for exacly something like this. Unfortunately, With ICS CM9 installed on my GP5 Bluetooth doesn't work =( (neither does the camera or hardware acceleration. They really need to fix that.)
So I can make phone calls/sms without having wifi?
oncaribe said:
A few days ago I bought a device called GMATE ($80), a type of smallcell without display or keyboard which is inserted a normal simcard and communicating via Bluetooth to the Samsung Galaxy Player, which means an application is integrated with android, receiving and making phone calls, and SMS, in addition to allowing internet access GPRS.
It's a perfect combination that increases the possibilities of Our Player
Click to expand...
Click to collapse
With the Gmate app, can your SGP connect to a regular cell phone with bluetooth or it can only connect to the Gmate?
testrider said:
With the Gmate app, can your SGP connect to a regular cell phone with bluetooth or it can only connect to the Gmate?
Click to expand...
Click to collapse
Gmate only.. I tried it with my other android phone and it doesn't work.
I came further when I changed my phone's Bluetooth id to "Gmate". It didn't connect because of a password failure
It's seems good
I don't quite understand... So besides buying the Gmate, would i need a sim card as well? secondly so would i practically be using a sim card with a data plan to use with gmate? but wouldnt that defeat the purpose of just using a smart phone with a card in it?.... these are all continuation Q's if the first is a yes lol.
This seems like a stupid question, but I'll ask anyway. How well does the device actually work? Does it keep a connection throughout the day, sending and receiving text messages without too much delay? I'm considering using this to replace my old dumbphone, but I'd rather not plunk down a sizable chunk of change with little indication as to how well this thing actually works.
Gmate calling speaker sound
Question: Does the sound come out of the front speaker while calling?
(I don't like to call everywhere with loud back speakers)
crowelfly said:
Question: Does the sound come out of the front speaker while calling?
(I don't like to call everywhere with loud back speakers)
Click to expand...
Click to collapse
I don't know about GMate, but on Groove IP (and probably others), the front speaker on the 5.0 is quite functional and is used for calls.
Mevordel said:
I don't know about GMate, but on Groove IP (and probably others), the front speaker on the 5.0 is quite functional and is used for calls.
Click to expand...
Click to collapse
Thank you for the info!
P.S. I like your rom a lot!
Cool!
Sent from my YP-G70 using xda app-developers app
EDIT: I HAVE FIXED THE MAIN ISSUE WITH MY GMATE, MORE INFORMATION BELOW
Well, my Gmate+ came in the mail today, and I've been playing with it for a little while now and am able to give first impressions. First off, the device is much smaller than I imagined, it easily fits in my palm, the vibration (on the plus version) is very loud. As for the function itself, it works. You can call and send and receive text messages (haven't tested the web access yet) with a few minor (and one major) annoyances. My device is currently a US SGP 4.0 running Terrasilent 1.1 and EtherealRom 2.3.
Minor annoyances I have found with the Gmate+:
- Notifications (read: texts) do not make noise/vibrate while the screen is locked. Once the screen goes on, if you do have a new text, it notifies you, kind of ruining the point of the notification.
- Text messages you send have proper time stamps, for some reason, the ones you receive are off by a few hours, as if the sender is in a different time zone
- Seems to be no way to delete contacts from the address book, even uninstalling, wiping data, reinstalling didn't do anything about this.
Major annoyance with the Gmate+:
- It disconnects, and by that I mean it disconnects ALL THE TIME, the device is pretty much useless because of this, it will be fine for a few minutes, then disconnect, regardless of how close the Gmate is to my SGP. Every few minutes, I'd check it, and guess what? No connection. Sometimes it would reconnect, sometimes I'd have to manually do it, sometimes I'd have to restart one or both devices to get it to work again.
Seeing as everything the device does it actually does quite well when actually connected, I want to rule this problem to some battery saving tweak in my kernel/rom. As such, I'll be returning to stock and trying the Gmate again to see if any of these issues are cleared up. As it stands, I have a 75$ paperweight that buzzes occasionally.
EDIT: After flashing back to stock and noticing no change, I began searching around and found other people having similar problems with similar devices, mainly connecting their smartphones to the bluetooth sound system in their car. Turns out in Deep Sleep, the device has issues keeping constant bluetooth connection. After downloading an app (Bluetooth KeepAlive: ~$1.30) on the market that keeps the device from entering this mode, the Gmate no longer disconnects, and has remained connected for several days, having no problem with calls or text messages at any time. In summary, with this app, I am now happy to recommend the Gmate to anyone who is looking for this kind of functionality. Guess it goes to show that non compatible apps are listed in the Play Store as non working for a reason

[Q] Bluetooth carkit problem

I have a Galaxy S3 I9300 for a couple of weeks now and I love it, other than the fact that I keep having a strange issue with the Bluetooth connection with my carkit. I've been searching forums for similar issues and I found a variety of carkit related problems, but none of the ones I found describe the same problem as what I'm having:
- Initially the Bluetooth connection works fine and I can play music or make a call through the carkit just fine
- When I switch off the car's systems and don't use any apps on the phone in the meanwhile, and then start the car's systems again, it establishes the Bluetooth connection just fine again
- When I switch off the car's systems and I use other apps for a while and then start the car again, it won't work. Bluetooth does appear to connect, but after that it just doesn't play ball. When I try to play a song at this point, the phone shows the song is playing, but neither the phone nor the car audio produces any sound
So anyway, every morning before leaving to work and every evening before going home, I reboot my phone first. Then I step into the car and it establishes the Bluetooth connection just fine. But if I don't reboot the phone first, it just won't work. Now I guess I could setup a tasker profile to automatically reboot the phone, but I'd rather just get the problem fixed.
I run a Galaxy S3 I9300 with stock Android 4.1.1, rooted. I have already tried to run the "Bluetooth Fix Repair" app and afterwards had to pair the phone with the carkit again, but that made no difference.
Any help would be greatly appreciated!
*bump*
Some additional info:
This issue has now also happened a few times while driving. While music (through Spotify) was playing over the bluetooth carkit, it would sometimes just stop working when I opened a different app (like for example opening an SMS). Spotify was still running (and the song was still ongoing) and also the bluetooth connection still showed as being connected, but it just wouldn't produce any sound anymore.
Anyway, it seems clear to me that this is a bluetooth issue, but I have no idea how I can troubleshoot this beyond what I've already done.
I would be happy to pay whoever can fix this problem..
With an issue like you are describing it may be helpful to list the headunit model too. I do not own an S3 but I have a multimedia headunit (Pioneer AVH P4400BH) and have found that toggling my Bluetooth on and off will help the headunit to see the Bluetooth on my Android device. This may not resolve your issue though.
Another thing to consider, your headunit may have an update-able firmware. That said if your headunit does have an update-able firmware I would check out the procedure, ensure there is a way to roll back to your current firmware and try that. If your headunit was purchased at an electronics or and audio retailer you may wish to speak with them. Your issue may not be with your phone but with your headunit, but this should help as far as troubleshooting since your issue involves multiple devices.
ItzCrooK2UxD said:
With an issue like you are describing it may be helpful to list the headunit model too.
Click to expand...
Click to collapse
My car is a Renault Megane RS, the carkit was built in. I believe it's called Renault Carminat TomTom.
ItzCrooK2UxD said:
I do not own an S3 but I have a multimedia headunit (Pioneer AVH P4400BH) and have found that toggling my Bluetooth on and off will help the headunit to see the Bluetooth on my Android device. This may not resolve your issue though.
Click to expand...
Click to collapse
I've covered everything like that in about 100 different ways, none of which made any difference.
ItzCrooK2UxD said:
Another thing to consider, your headunit may have an update-able firmware. That said if your headunit does have an update-able firmware I would check out the procedure, ensure there is a way to roll back to your current firmware and try that. If your headunit was purchased at an electronics or and audio retailer you may wish to speak with them. Your issue may not be with your phone but with your headunit, but this should help as far as troubleshooting since your issue involves multiple devices.
Click to expand...
Click to collapse
Good point. It does have an SD card slot, but as far as I know that's only to update the maps of the navigation system. I'll see if I can figure that out.
Thanks for the tips!
By the way - I do think that it's unlikely that the carkit itself is the troublemaker. Especially because opening an SMS on my phone can trigger the whole thing to stop working (it doesn't happen every time, but it did happen several times). Please correct me if I'm wrong.
Apoc_ said:
By the way - I do think that it's unlikely that the carkit itself is the troublemaker. Especially because opening an SMS on my phone can trigger the whole thing to stop working (it doesn't happen every time, but it did happen several times). Please correct me if I'm wrong.
Click to expand...
Click to collapse
It is in fact very possible that it is your phone, but wanted to throw it out there that bluetooth headunits can be troublesome on their own. Now I am not familiar with your headunit, but does it save bluetooth IDs? Like on my headunit and many other aftermarket headunits, it will save 3 bluetooth devices. If it does, have you tried clearing other devices and moving your S3 to the top? Odd as it sounds this has made a difference for me. Also do you have other bluetooth devices in the car, such as the 3GS you mentioned?
Also a logcat of this happening would be beneficial. If you do not know how to pull a logcat there is an app on the market called catlog or alogcat. Both are free and are invaluable in troubleshooting a ROM issue. In short it tells a developer what is going on as far as events being triggered or failures within the ROM.
ItzCrooK2UxD said:
Now I am not familiar with your headunit, but does it save bluetooth IDs? Like on my headunit and many other aftermarket headunits, it will save 3 bluetooth devices. If it does, have you tried clearing other devices and moving your S3 to the top? Odd as it sounds this has made a difference for me.
Click to expand...
Click to collapse
Yeah I had read that too in some other thread (I went through just about every bluetooth related thread I could find, before I posted this topic). Mine saves up to 5. It didn't have anything in there except for my previous phone, which I had cleared. I also tried re-pairing the S3 several times, that didn't make any difference either.
Now, I just read somewhere that some people are having disconnection issues on the same carkit. In their case, in the end the problem turned out to be that their carkit will import all of their contacts from their phone (so you can call people even while your phone is in your pocket), and this would cause trouble when there are contacts without a phone number associated with it (just like my thousands of Exchange contacts). The people in question are talking about random disconnects though, whereas in my case it happens after doing some stuff on my phone. So it's probably unrelated, but I'll give that a try anyway just to rule it out. I just need to figure out a way to stop the carkit from importing contacts, because removing thousands of email contacts is obviously not an option.
I'll keep this topic updated with any progress. If anyone has any other ideas, please keep em coming. Thanks for the help so far!
ItzCrooK2UxD said:
Also a logcat of this happening would be beneficial. If you do not know how to pull a logcat there is an app on the market called catlog or alogcat. Both are free and are invaluable in troubleshooting a ROM issue. In short it tells a developer what is going on as far as events being triggered or failures within the ROM.
Click to expand...
Click to collapse
Didn't think of that, great tip, thank you! I do run the stock ROM by the way.
I've installed alogcat just now. Does it just keep running automatically in the background?
Apoc_ said:
Didn't think of that, great tip, thank you! I do run the stock ROM by the way.
I've installed alogcat just now. Does it just keep running automatically in the background?
Click to expand...
Click to collapse
It reads a file that is being constantly updated (which happens to be the logcat file). Typically I will clear it right before doing what it took to cause the failure, like in your case in your car with the bluetooth on.
I've got Audi with BT and S3 with custom rom and I've got similar problems with BT. It connects automatically but if I switch off BT in phone and switch it on again - it doesn't connect any more. I had this since I bought a phone and it was on all ROMs I used.
YoghurtPL said:
I've got Audi with BT and S3 with custom rom and I've got similar problems with BT. It connects automatically but if I switch off BT in phone and switch it on again - it doesn't connect any more. I had this since I bought a phone and it was on all ROMs I used.
Click to expand...
Click to collapse
Yep - I have that too. The weird thing is that in that situation the phone does seem to think it is connected, while it really isn't. Just to be clear: this is not the only way to cause this issue (because it also happens when trying to reconnect the Bluetooth while on the phone it hasn't been disabled in the meanwhile).
So far I haven't been able to pull anything related from the logcat.
Also, while reading up on common bluetooth issues, I came across some posts of people who were saying that some phone/carkit combinations are having trouble with 2-way communication (because I can stream music from the phone to the carkit, but I can also change a song using the carkit or initiate a phonecall from the carkit). I'm going to try to only use communication initiated from the phone, and see whether that makes any difference. In the meanwhile: does anyone happen to know anything about 2-way communication issues with bluetooth, and how to overcome such issues?
Update:
- Updated carkit to latest firmware. No change, still same problem
- Have not been able to capture anything unusual in the logs
- I have a Bose Soundlink now, which is a wireless speaker. Whenever my S3 is connected to the Soundlink (with bluetooth), wifi doesn't work. Upon turning off bluetooth, wifi instantly works fine again. So this definitely confirms this is a problem with bluetooth on the phone, not on the carkit.
- Wanted to upgrade to Android 4.1.2 but Samsung won't let me, as it says the device is modified (rooted). Triangle away isn't helping. Damn you, Samsung. This is *the* reason I moved away from Apple, as I don't like companies who don't let you use your stuff any way you like. And now Samsung is moving down the same route. Idiots. Anyway, I guess the only option left, is to start using a custom ROM.
Does anyone happen to have experience in terms of solving bluetooth problems by using a custom ROM? I'm thinking of using Cyanogenmod 10.1
In the meanwhile I have upgraded to Android 4.1.2: still the same problem.
I have also discussed this matter with quite a few other Samsung smartphone owners, and all of them appear to be having the same issue. Most of them just don't seem to be bothered to spend time on looking for a fix.
Also, I have figured out that this problem is specific to media streaming. I'm able to use my phone on the carkit for calls at any time, without having to reboot first. Only when I try to listen to music, the problem occurs.
Anyway, I have ruled out that this problem is specific to me or my devices - this appears to be a global issue. So I'm completely puzzled as to why there's not a lot more fuss going on about this.
If anyone has any more suggestions for a resolution of this problem, please share.
S3 bluetooth connection problem
Had the same problem with my S3 and renault megane III handsfree bluetooth system.(Arkamsys software version 2.2.0.19 auditorium)
I downgraded to 4.0.4 baseband I9300CELH1 (stock) and problem seems fixed
hope this helps.
Hi Bennes,
Thank you for your response.
I'm still dealing with this problem myself. All upgrades so far haven't made a difference. So far, I've been able to figure out that if I first initiate a phonecall, after hanging up, the audio streaming works (while before the phonecall it usually wouldn't). This works about 8 out of 10 times (the other 2 times it doesn't make a bluetooth connection at all). So what I've done, is to use Tasker and to automatically make it call my own phone number whenever bluetooth gets connected to the carkit, and hanging up after 3 seconds. But this is obviously far from ideal.
Do you know whether it is possible to change the baseband version without changing the firmware version? I wouldn't like to downgrade to an older firmware version, as I like the new features in the newer versions. I do also prefer to stick with the stock firmware, but that's not a requirement.
Carkit bluetooth issue
Apoc_ said:
Hi Bennes,
Thank you for your response.
I'm still dealing with this problem myself. All upgrades so far haven't made a difference. So far, I've been able to figure out that if I first initiate a phonecall, after hanging up, the audio streaming works (while before the phonecall it usually wouldn't). This works about 8 out of 10 times (the other 2 times it doesn't make a bluetooth connection at all). So what I've done, is to use Tasker and to automatically make it call my own phone number whenever bluetooth gets connected to the carkit, and hanging up after 3 seconds. But this is obviously far from ideal.
Do you know whether it is possible to change the baseband version without changing the firmware version? I wouldn't like to downgrade to an older firmware version, as I like the new features in the newer versions. I do also prefer to stick with the stock firmware, but that's not a requirement.
Click to expand...
Click to collapse
mmm, don`t know about baseband only. Try google.
I have read that after downgrade to 4.0.4 and then upgrade again to latest stock version, bluetooth connection keeps working.
I cannot confirm this as i am still on 4.0.4, but will get an update of the arkamsys radio to the latest renault firmware version next week and then start experimenting again. i will report back once i have new results
Bennes18 said:
mmm, don`t know about baseband only. Try google.
I have read that after downgrade to 4.0.4 and then upgrade again to latest stock version, bluetooth connection keeps working.
I cannot confirm this as i am still on 4.0.4, but will get an update of the arkamsys radio to the latest renault firmware version next week and then start experimenting again. i will report back once i have new results
Click to expand...
Click to collapse
BB only, try this :
http://forum.xda-developers.com/showthread.php?t=2106424
Confirmed the update thing, i have updated the S3 to version 4.1.2 BB I9300CEELL1 and have no bluetooth issue whatsoever, car audio still on 2.2.0.19 byt the way
Pretty strange ... , but glad its working !
I have the same issue with a Ford Focus =/
also, while using CM or Omega, the music title never changes.

Categories

Resources