I am unable to boot but I can get into the bootloader; my SPL is v1.20 Olipro.
Any suggestions?
Fixed, currently flashing AP3.0.
And then we will try again....
Please close, this one is fixed.....
HELP its broken!
hi I was so excited at the ap4 release . I was updating and had a power cut. I can enter boot loader but that's it. just the green light stays on (full charged) can't do anything else
please can someone help me
Flash AP 3.0 ; it fixed my problem.....
Related
When I try and reflash the ROM it gets to 1% and says Vendor ID error
spl 1.11 only boot in tricolor screen
My laptop went into hibernate (hard button pressed accidently) 33% of the way through the standard ROM upgrade of the latest 3.3.1 (SPL.1.11).
Now it will only boot into tricolour screen with SPL-1.11 and IPL-1.00
When I try and reflash the ROM it gets to 1% and says Vendor ID error
Everything else just wont conect.
From the forums this seems to be a true brick!! Am I right or is there another way (I dont have KITPL enabled on the ROM).
Thanks for any help
Try reading some more, AND post in the appropriate place!
http://forum.xda-developers.com/showthread.php?t=286755
I FOLLOWED all instructions for upgrade ROM and RADIO? Can one of you experts HELP? my titan keeps on rebooting and rebooting, it will not stop rebooting, PLEASEEEEEEEEEEEEEE HELP WITH INSTRUCTIONS ON HOW TO MAKE IT STOP REBOOTING.
It sounds like you might have a mismatched bootloader and ROM.
Hold down power and camera buttons while resetting. This will put you into the bootloader. What version is it?
If I am correct, IMHO the easiest way out is to load a ROM that matches your bootloader and then you will be able to connect via Active Sync once again. At that point you can start over.
Looks like JohnW on PPCGeeks had a better suggestion to upgrade the bootloader:
"Trick to load this SPL in is to
Hard reset your phone
Boot to the Wellcome screen BUT do not tap your screen
At this stage plug in your phone into your PC and apply the SPL unlocker."
hi,
i tried freflashing the WM5 rom but got connection error while doing it and now it stuck at the bootloder mode.tried doing it all over again but the device keeps on turning off after a while and then turn on again and everytime it tuns off i get the connection error msg.tried chargin the device but theres no red lght indicator when charging..the device will keep on on and off by itself..
pls help
Charge the device (using the mains supply or a battery charger).
Start the device up, and then manually enter bootloader.
Then, follow this http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Since you can enter bootloader, it should be relatively easy to fix.
Prophet stuck at bootloader
Hello Friends...
While Trying to update my prophet rom something really wiered happened to it... after installing new roms it comes back to RGB colour screen and only shows IPL 1.00 & SPL 3.08.0001 moreover it says "Format is Failed"
is it possible for a device having G3 IPL and G4 SPL ?...
Please Help me out what should i do now ?...
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
For some reason the phone got unresponsive and upon power on it get's stuck on the HTC screen. I tried the reset via volume -/+ and power button, it says reset complete and when I reboot the device it get's stuck again at the boot screen on HTC.
I am not sure if I picked up the right ROM (RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_22.45.50.21_Signed_SCHUBERT_RELEASE) but when I try to flash it I get error 262.
I see SPL 5.12.2250
Can anyone help please?
Thanks in advanced.
271 view and not even one replay? really?
Same Probs for Me to Some One Pls Help Mee
You are on a Mozart forum... Schubert is HD7 And if your SPL is 5.xx try this: http://forum.xda-developers.com/showthread.php?t=1597837 or this:http://forum.xda-developers.com/showthread.php?t=1429318