Big Problem - Touch Dual, MDA Touch Plus ROM Development

please can someone tell me where i am going rong i'v had some problems this morning at 2am im still up trying to sort it,it crashed on me so did a hard rest after finding out how to hard rest manualy,now because iv done something rong i trying to flash and put a NEW rom on,im stuck with the SCREEN saying
Niki100
SP-1.16.hard
CplD-4 and in the right corner its says RUUNBH or something
i cant seem to get back to my NORMAL ROM

bootloader mode
try to put your device in the bootloader mode and flash it again.
steps for going to teh bootloader mode (taken from the Wiki):
* Remove back cover.
* Hold camera and power buttons.
* Press reset with your stylus (little button to the right of USB port).
good luck.

iv done that and it keeps coming back to the same screen

tommie&morris said:
try to put your device in the bootloader mode and flash it again.
steps for going to teh bootloader mode (taken from the Wiki):
* Remove back cover.
* Hold camera and power buttons.
* Press reset with your stylus (little button to the right of USB port).
good luck.
Click to expand...
Click to collapse
I have the same problem.

Related

plz help me my nike is dead

hi my nike stuck on splash screen i tried to flash it by sd &many rom but still dead
u6ariq said:
hi my nike stuck on splash screen i tried to flash it by sd &many rom but still dead
Click to expand...
Click to collapse
plz help me
Push and hold the camera button while starting your device to reach the bootloader menu.
Did you flash a wrong hardspl (for exampel neon on a niki)?
More details on your problem will be helpful!
square2k4 said:
Push and hold the camera button while starting your device to reach the bootloader menu.
Did you flash a wrong hardspl (for exampel neon on a niki)?
More details on your problem will be helpful!
Click to expand...
Click to collapse
i tried to flash it to 6.1 from ce4arab but the cable UN bulged from it
then stuck on htc splash screen
itried to flash it by the original rom but no way to work
by the way thanx for ur interested
To me it sounds like it could be fixed by reflashing indeed.
Ofcourse while it's stuck in the HTC splah, the flashing tool won't find it.
What you need to do is this:
Turn off the phone (remove the back cover, remove the battery and re-insert the battery).
Then make sure it's fully charged (just connect the charger, don't turn it on.
Then (while still off!) press the camera-button (on the side), hold it and also press the power-button. Hold them both until you see a screen with three colored bars and some text.
Then connect the phone to the computer and flash as you usually would.
That should fix it.
nike dead?
buy adidas
funny lol

Big problem need help

This is my first post, so hy guys...... (i hope ive posted it on the wright location)
when i'm pressing the Turn on button it comes only the green "HTC" logo in the middle Without the system information in the left bottom i've to be onest im getting scared cause ive tried a lot of hard reset and nothing happens....
another problem is that i cant connect it at the pc because the connection by usb dont work.....what can i do?????
you're device is stuck just before flashing a rom (that happens when you perform task29 for instance)
Quote: "If you get a white screen with "hTC" in the middle then you need to take out your battery and enter bootloader mode manually before continuing (take battery out and put it back in, then hold the volume down button and briefly press the power button. Keep holding the volume down button until the bootloader screen appears)"
after that you can flash your device with any rom
Good Luck
get into bootloader mode and then flash a newer radio ROM. solved the problem for me.
p.s. read thoroughly about the correct radio for ur phone before flashing one
abuawab said:
you're device is stuck just before flashing a rom (that happens when you perform task29 for instance)
Quote: "If you get a white screen with "hTC" in the middle then you need to take out your battery and enter bootloader mode manually before continuing (take battery out and put it back in, then hold the volume down button and briefly press the power button. Keep holding the volume down button until the bootloader screen appears)"
after that you can flash your device with any rom
Good Luck
Click to expand...
Click to collapse
it work mate thank you a lot!!!
anytime

[Q] HELP!!! HD2 won't boot up after task 29...

PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
lisah456 said:
PLease can anyone let me know the process to load a rom onto a HD2 that will not boot up....? Windows mobile device center will not detect it either. Bootlogger screen says I have SPL-2.08.HSPL 8G XE, and underneath it says CotullaHSPL if that is any help. I would really appreciate any help!
Click to expand...
Click to collapse
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
after task29,when your device reboot
press botton "volume down" and will go in bootloader mode
now if you have your device stuck in white screen,remove battery cover
press red botton for softrest and press "Volume down" botton
bobsbbq said:
After task 29 you have to flash a ROM. Task 29 wipes your device so if you don't hold down the volume down key at the end of task 29 it will not have any operating system. Just remove the battery and hold down the volume down key till you see the bootloader screen. Then flash your ROM and all is ok.
Click to expand...
Click to collapse
opsss..sorry bob
i have look now your post
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
kikimax said:
My problem is that the windows mobile says that the phone is not connected?
What do I do now?
Thanking you in advanced,
Henry
Click to expand...
Click to collapse
It won't because you're in the bootloader. Does it say USB at the bottom of the bootloader screen? As long as it says USB when the phone is plugged into your computer, flash a ROM and be happy
Hello!
And what if my hd2 not entering into the boot loader?
Thanx in advance
There is only one way to get into the bootloader.
Hold down volume and keep it down....
After that press the start button and your phone will boot up.
Now you will see the tree colored screen and you're in the bootloader.
Goodluck.
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
When you are in the bootloader screen, connect the phone to the computer /with the usb cable/ on the same bootloader screen it will change to USB - look at the bottom of the screen:
Open the folder - on your computer - where the ROM you want to flash is:
find the "RomUpdate*.exe" or "Install.exe" /if Android it will most likely say "DAF.exe" - run it as Administrator/ file and run it. Do as it says on the screen.
Do not disconnect the cable, do not touch the device. When it is finnished it will restart the device, disconnect the cable and enjoy your new OS.
wopin80 said:
same problem..connected to pc but wmdc doesn't discover it so i can't flash anything.and sd card flash doesn't help.what can i do now?
Click to expand...
Click to collapse
use a <4gb or preferably <2gb sd card - class 4 or 2 with LEOIMG.nbh.
HSPL3_pkg after that - make sure .nbh (as above on sd root) is your stock and you CLEAN-reinstall bootloader.
ps:
Then hspl, then radio, then magldr, then windows 7, the hacks, then call M$= LIVE!
Hi guys i have a similar problem. After task 29 i went into the bootloader but can't install any rom whatsoever. I have SPL 3.03 on my devide, mind no not hard spl but SPL. Can anyone please help me solve this issue? I also tried to flash using sd card but it doesn't work. Please help me save my hd2. Thanks in advance.
tmo-hd2 wont go into bootloader after task29
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india..
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
gdsbalaji said:
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
Click to expand...
Click to collapse
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
lms1407 said:
Isn't it ironic: Stick together!...
There is a guide on How to get back from WP7 here on the forum.
First i would sugest to reformat the card from WP7 bul...
If i understand correctly, you can't get into bootloader or magldr!?
So you can't do nothing?
You can try this sollution and if it doesn't work, go to the service center to reset it totaly.
There was a guy with the same problem here:
Originally Posted by splinters69 View Post
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
http://forum.xda-developers.com/showthread.php?t=913081
Click to expand...
Click to collapse
I hvnt even instaled MGALDR yet....task29 and hd2 went into trouble...need to get to bootloader to save it now
Tried this as well before posting....hv a 2gb sd card>formatted to fat 32> stock rrunbh to leoimg.nbh > moved to root of sd card....but this can only work if bootloader can be initiated right? i cant get to boot loader
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
SOLVED {bootloader dont load}
checkout the solution for my problem here....might help u as well.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
______________________________
if you feel this helped...thank me
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
DeAdMaNwa said:
hi there i have realy big problem i have done that task 29 trick with the blackstone advangeruu and there was something wrong after restart so i pulled the battery out.
now my phone wont do any thing when i hold nowd the start button en volume down i know it has no os. but is there any way to get in the bootloader screen hope some one can help me beceasue i need my phone.
Click to expand...
Click to collapse
Man, did you say blackstone? You should go into Blackstone forum
To go into bootloader, turn off the phone. Press volume down button and the POWER ON button (not start button) at the same time until the screen appear. It works on both Leo and Black Stone
Goodluck

Problem With Odin

I'm trying to load the Unofficial 2.2 ROM onto my phone and I'm using the Odin method. I got into Download mode, got the pit and the ROM and put it all in place, the process starts but it just keeps getting stuck at "Do not turn off the Target." Now if I restart it, it won't even go into my phone.
Any suggestions why it keeps stopping at that point?
Q and A section
ferhanmm said:
I'm trying to load the Unofficial 2.2 ROM onto my phone and I'm using the Odin method. I got into Download mode, got the pit and the ROM and put it all in place, the process starts but it just keeps getting stuck at "Do not turn off the Target." Now if I restart it, it won't even go into my phone.
Any suggestions why it keeps stopping at that point?
Click to expand...
Click to collapse
My advice is to repost this question in the Q and A section and then edit your OP, to indicate you've done as much... Add a link in THIS OP to your Q and A thread. You should get some help after that i'm sure.
does you phone just sit at a black screen? mine did the same thing black screen to where i doesnt look like its on but if you turn the lights off in the room your in you will see the screen is actually lit! no idea on how to fix this myself... on mine if you press and hold the vol up, vol down, and power buttons for a while, (until your fingers hurt) you will eventually see a black screen with red writing with some stuff i was unable to understand! but thats all i could get out of the phone... called t-mobile and they sent a replacement... but i would like to know what i did wrong because i will be flashing froyo alot and i dont want to run into this problem again... btw can get odin to recognize the phone at all!
If your phone is not Hardkey locked.
1) Remove battery from phone and put it back in again
2) Plug your USB into your computer (and make sure it is not in your phone yet)
3) Push and hold down your two volume keys (DO NOT HOLD DOWN THE POWER BUTTON)
4) Plug in the USB cable into your phone
This takes me into Download every time. I did what you did. I had problem with Odin my phone and it just got stuck. I unplugged the phone and rebooted it. Or I should say I tried. It was dead to the world. Black screen. Power button did not start etc. Ran into a note from Kazer and he suggested the above procedure and it worked every time for me. Holding down the power button did not work for me.
Try it out and let me know if it worked.

[Q] Bricked For Good?

hey guys,
was flashing kernels and roms willy-nilly and i think i have bricked my phone for good, it wont charge, wont load at all and wont return to flash mode, just sits there black screen and light - no vibe on hard reset (power button and middle button)
if anyone can help me at all would really be greatful, tryed to press the "reset" button by the batt cover by no joy
i cant remove the batt as my screwwys aint small enough
** Close Me **
***CLOSED**
How i did it:
1) Removed back cover
2) Look to the left hand side across from the camera and removed the "tab" of plastic
3) Got a flat edge screw driver and removed the power cable
4) Replaced power cable
5) Set up flash tool to flash the right kernel (waiting at the plug in usb dialog)
6) Pressed back and connected the usb
7) Flashed kernel
8) Turned on the phone pressing the power / back button trying to access recovery
9) Mounted sdcard
10) Placed correct update.zip in root and gapps
11) Went back to recovery and flashed rom and gapps
12) Rebooted system
Thread moved. Please post all questions here in Q&A in future. No need to close it as may help others with similar problems in future.
Thanks
AvRS

Categories

Resources