i have a O2 XDA II . it came loaded with 1.66WWE. i wanted to put 1.60. i downloaded it from sourceo2.com
then double clicked the installable. it started the downgrade . it said it will take 30mins & started deleted the rom image.. i then went for lunch & came back in 15mins.. the phones now totally dead.
If i dock it , the screen says USB V1.06
if i remove it the screen says Serial V1.06. I cant hard rest it nor can i soft reset it. i huess cause there no rom image in it.
What do i do.. please help with as many links software as one can..
Please...
ive got 1.72, but when i try that. it says country error.??
can that be resolved.. i dont mind loading 1.72.
the good news is that it seems you still have the boot loader working ... use ER2003 tool to modify the country code of the 1.72 ROM file ... or you can use the xda2nbftool.exe if you like the command line mode
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
hyper said:
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
Click to expand...
Click to collapse
Unpack the .exe file with winrar/winzip. And you're good to go.
Edit this file: ms_.nbf
managed to unpack it... now when i try to load 1.60 it says model id error & if i try to load 1.72 it says country id error.
what do i change in the ms_.nbf file ????
do i only change this file fields or all three??
i even removed the battery & checked the model ID. on my phone it says PH10B
i changed all the three files to PH10B ..
Now i get Connection Error.....
Now what???
now the error is ERROR 101... connection error.
(i'm loading 1.60)
also is it possible for me to do it via my emory card (i have a MMC32MB & 128MB)
if so, what file do i need to copy & then whats the procedure??
i got 1.03.00 rom on mine. my xda 2 is 2 days old now dunno wht rom to load it up with now. whts the best & safe rom now. i have no apps or nething to back up so its oki. the phone was bought from u.k. and was locked on O2 network. now its unlocked and being used in India. plz advise wht ROM to d/n and use. if possible the d/n link as well. thx
Question?
Why do you want to downgrade your phone? :shock:
For upgrade to 1.72:
1. Download i-mate 1.72 update and xda2nbftool
2. unpack that update to any directory on your harddrive
3. download script from this post to created directory (unpack it too)
4. copy xda2nbftool.exe to that directory
5. run provided script
6. insert XDA2 to cradle and then HimaUpgradeUt.exe
You will i-mate splash screen from i-mate though, but working device.
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
i wonder... most O2 XDA II come with 1.6 rom version. mine came with 1.66. could that mean its not O2 even though its written O2 on my phone? could it mean its T-Mobile or something??
can someone post a link or software that i need to put onto my MMC card & then use that to install the rom from the card inserted in the phone??
hyper said:
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
Click to expand...
Click to collapse
So, what's that problem? Can you run it?
Try to run it in command prompt... And if it writes any error, post it here...
Can you access the file system of your XDA2 from ActiveSync -> Explore?
now i managed to get the problem of Country error out of the way , but now im getting the ERROR 101 - Connection Error.
no i cannot browse any files & my active sync does not show connected.
what files do i need to copy paste onto my MMC card so that i can flash it by executing the files with the camera button & the MMC Card inserted??
im dowloading the NTRW & 1.72 NK.nb1 file. do i just copy & paste it on the mmc card & then instert the card into the phone & then press the camera button.. should this do the trick??
this is all that i have tried so far... yet no luck.
my phones originally from malaysia , its an O2 XDA II
i have the following rom with me. my bootloader is V1.06
1. RUU172800WWE_CDL_SKU1
2. XDA_IIupgrade_v16050
3. RUU172104wwe-t-mobile-uk
1. i removed the battery , dcoked the phone, connected the charger to the docking bay at the back...the red light on the phone lights up.... the bootloader screen shows up ina slightly distorted manner.
i then ran all the three roms as it is..without editing anthing. The error i get in all the three times is ERROR 101. CONNECTION ERROR. it tells me to check is usb is connected, charger is connected usb port is conencted & the phone is on. .......... everythings connected but obviously phone can only be in bootloader mode.
2. i put the battery back in dock the phone, the charger is yet connected to the back of the docking bay. .. i try all three installations withour extracting or editing as they are exe files..... now, all the three times i get COUNTRY ID ERROR OR MODEL ID ERROR.
3. when i edit the ones that give me model id error then i get CONNECTION ERROR AGAIN. (this is again with the battery in & charger plugged in)
i downloaded the NTRW & 1.72 NK.nb1 file. but the one that is available on this forum is corrupted. so i cannot extract it.
NTRW ive downloaded seperately. i need the nb1 file now. can someone post a working, no-corrupted image rom image file?
once i get the correct Rom.nb1 file... all i have to do it copy & paste the correct rom.nb1 & ntrw.exe file onto my MMC card & keep the battery in the phone & insert the MMC card & press the Camera button .... is that correct? i'm guessing that this will run the ntrw exe file & load (dump) the Rom.nb1 file onto the phone. is that correct?
please do let me know what else i can try & dowload a newer RUU or something. i think the best way is to SD flash the phone.
i dont even mind flashing it to a PPC2002 version & then upgrading it from there. if thats possible.
As far as the connection between the USB Docking Bay is concerned,...everytim i connect or disconnect the phone, i hear the familiar XP "TING" which shows that some USB thing is connected, but my active sync does not show that the phones connected, i guess that cause it got no rom in it.
Also when i edit the ms_ / NK / Rom files er2003 i get an error everytime i start the software, but i just press IGNORE & continue. i always get ROM successfully written & then the error pops up again but i keep pressing ignore. this works... but whats up with the CONNECTION ERROR. IF ITS NOT CONNECTING TO THE PHONE, HOW DOES IT KNOW THAT THE MODEL ID OR COUNTRY ID WRONG ???
Ok.
If any ROM update can detect your device (as we can see error messages COUNTRY ID ERROR or MODEL ID ERROR), there is hope, you can update your device.
If it's 1.72 ROM (that writes COUNTRY ID ERROR or MODEL ID ERROR), use the solution I send you few posts ago (unpacking, running batch script etc.)
When you updating, keep battery in your device and charger of device connected to cradle! Don't remove anything.
BTW: Don't use RUU172800WWE_CDL_SKU1 update, it just update only part of your device (ExtROM)!
BTW2: Read this: http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
thanks againa beecher. the problem is that once i use the patch & then run it. it does not show me the country id or model id error (for which i thank you) but then it says error connecting.
i have a USB to serial connector. should i try serial connection?? or maybe try it on another computer.
can anyone please tell me how do to a SD flash step by step with the Rom.nb1 file attachment of link.
hi friends
I have sx56 att upgraded wm2003.
I have taken services for gpras and tried to setup in my sx56.
following are the details of gprs settings that my mobile career provided me.
+++++++++++++++++
1. start -> setting -> connection -> tap-connection.
2. under internet setting .... choose "my work network " -> add new modem.
3. tap "general" and connection setting name as "XXXXXXXX"
4. enter connection name as "XXXXXXXX"
5. select "cellular line gprs".
6. by tapping next --- given APN "XXXXXXXXX".
7. user name and password keep blank and tap finish.
8. again go to connection -> manage existing connection -> select proxy setting
9. tap on both the block and go to 'advance' ... in first window write URL and and in WAP setting enter "xx.xx.x.xxx" - 9201. -> tap ok.
10. from the desktop -- tap coverage tower and connect using "XXXXXX" connection.
+++++++++++++++++
ok all the above setpes are done by me and I am able to establsih connection.
I have also checked by command prompt and checked ipconfig details.
I found all assigned ip and dns in it.
the problem is I am not able to open any site in IE browser and page processing shows loading.
can anybody tell me what can be the problem.
thanks
GPRS
Hi All
I have similar problem
I just unlocked my ATT phone using the Wizard
WorKs flawlessly except the Calendar and dTree both end up in German
Is there any fix
The other problem is GPRS
Gprs connects to provider the problem is I am not able to open any site in IE browser and page processing shows "The page you are looking for cannot be found"
can anybody tell me what can be the problem.
Great Forum
Thanks
Maynard
gprs
I just unlock my phone using the xda-developers serv 1.2exe and after that use a upgrade rom and radio from siemens to wm2003
my radio is a.33.02 and the rom version is a.20.09 ENG
and is working beautifull
i have the upgrade if anyone want it but can upload here i tried
send me a pm with email address
I used to be with AT&T with my 8525 and then switch to Sprint which of course doesnt work with Sprint. So i ended up getting a Samsung Rant and dont exactly like the web browser so i was wondering exactly how i would go about sharing my data connection with the 8525 via blutetooth. I tried it once and this is what i did:
1. I went to settings and clicked on connection settings under the connections tab.
2. clicked on Add a new modem connection under "My ISP"
3. When i do that it asks to enter a name for the connection and to select a modem, so i select bluetooth as modem and click next.
4. Then it asks for the device the connection is on and i select my rant and hit next
5. then it asks exactly this and has a text box under it: "Enter the number exactly as it should be dialed. include extra numbers, such as an ouside line or credit card" didnt exactly know what to put here so i just put a few randon numbers in to see what next step would be
6. then it asks for user name password and domain....dont know what to put here so i just clicked finish
7. when i try to connect to it. it says connecting and a message on my rant says entering into bluetooth data mode, and the 8525 tries to connect for a minute and says connection failed and goes back to today screen.
So if anybody could tell me in detail what info it is that i need it would be great. and also under select modem drop-down box there is a selection called "cellular line(GPRS, 3G)" is it possible i could just put the info for the data plan in there and it connect to the sprint data plan if that is possible..if it is can you tell me in detail the information u need and how to do it......THANKS
Hi All,
Thank you for such a great forum. I tried to read as much as I can but still unable to solve the problem which I am facing currently.
I had a T Mobile MDA (HTC Wallaby) with the German Language. I tried to install a new ROM but after few seconds of connecting with the PC, the connection was broken and the computer doesnt
recognize the PDA. The only message i see in the screen is
WALLABY
Bootlader
V5.22
GSM OK
my Base ROM is 4.00.33 GER
I tried to cook the ROM with this base ROM and tried the steps ( Flashing with a SD card). I also downloaded the XDA tools and tried to run OSImagetool. Then chose the source file as the one
i downloaded with .nb1 extension. the chose SD card as the destination but i get this error message
"error opening device \\.\PhysicalDrive1 for writing: Access is denied.
error opening target device"
Please help me how i can restore the XDA to its original setting. I have already spend about 4 hours on this but cant get any further
ps. solved the problem.
had to use another Laptop.
dddddddd
ddddddddddd
I got a Sprint LS990 ZV6 phone from ebay. I decided to use it in T-Mobile, so rooted it. After following so many steps, the phone is not accepting any SIM card when I switch to GSM.
I followed below steps.
- Downgraded phone to ZV4 from ZV6
- Rooted the phone using Stump root
- Changed the carrier options as per http://forum.xda-developers.com/sprint-lg-g3/general/unlock-sim-gsm-how-to-t2853594
- Added APN settings for T-mobile changed network pref
- Inserted my SIM and rebooted the phone.... I shows No SIM card (the SIM is working properly in other phones & I tried couple of SIMs nothing works)
Can anyone please tell me after downgrading & rooting the phone, will it show Active SIM for GSM (i.e. signal bar not with red cross and No SIM icon).
If anyone faced this issue and resolved it, please help me also on this. I have been struggling from more than 2 months to fix it.
Try this http://forum.xda-developers.com/sprint-lg-g3/general/how-to-gsm-unlock-t2961099 I made it and listed people that confirmed it working if you need help pm me or them.
Finally after following below steps it worked
GSM Unlock for Sprint LG G3 (Works for US GSM Carriers & International Carriers)
1. Root the device using StumpRoot - Download here http://forum.xda-developers.com/lg-g...rizon-t2850906
2. Install SuperSU & Root Explorer & 920 Text Editor (or you can use Rom Tool Box for build.prop editing)
3. Copy build.prop from /system/build.prop to /sdcard
4. Open /sdcard/build.prop in 920 Text Editor
5. Edit line 268 and change ro.build.target_operator=SPR to ro.build.target_operator=spr
6. Save the file
7. Go to root explorer and copy build.prop from /sdcard to /system/ - try and delete existing build.prop and then copying the one from /sdcard instead of overwriting the existing file. I've encountered bootloops when overwriting build.prop
8. change permissions on /system/build.prop file you just copied to "rw - r - r". This is very important - when you copy and paste build.prop it loses the correct permissions and incorrect permissions will result in bootloop
9. reboot the device
10. It should now be unlocked. You will be unable to change the Network mode under "Mobile Networks" which will be grayed out so use the app "Network" from the play store to change the modem to "GSM (auto PRL)
11. In a few seconds you should see a signal. If not reboot the device once again and it should work.
12. Download "Tweakker" from the play store to get to APN settings and configure required APN settings for your carrier. After you are done with this step, you should have 3G/HSPA+ or Edge connectivity
1619415 said:
Try this http://forum.xda-developers.com/sprint-lg-g3/general/how-to-gsm-unlock-t2961099 I made it and listed people that confirmed it working if you need help pm me or them.
Click to expand...
Click to collapse
Thank you. I was using these steps as well.
Now the next search is using this phone in T-Mobile or at&t for LTE.
Does any one got any spell for this
As far as I know you cannot use LTE due to the face our device does not support it.