i just procure dis phone (htc x515e) and its on 2.3.6 os,i've tried to update it to 4.0.3 through ota it downloaded successful after accepting the update now my phone restart automatic and start updating it with a green cros bar moving from 0% to like 40% and it stucked there and disapear with a red triangle until i remove the battery and reinsert it when i powered it wit power button.it wil boot back to 2.3.6 os.i also try to update it with ruu 4.0.3 through my pc (window 7) bt my computer wil not recognice my phone when connected through usb cable,i've install varies htc drivers and htc sync it (htc x515e)only indicate the lcd orange light (indicating charging).i've try to switch from charge only to disk drive through setting connect to pc without a positive result.plz help me i need to upgrade this phone to 4.0.3. Bootloader is locked,soff
Just as the title says help please before leaving to work I flashed a kitkat rom to my phone (the htc one) usually when i flash roms everything goes well but this time it went bad and now i cant access recovery my phone is at an endless bootscreen and when i try connecting it to my pc my computer doesnt recognize it just a message saying error trying to read usb device
im running Windows 8.1
original usb cable that came with the phone
Phone is SCH-I545
My trouble started when I upgraded to 4.4.2 while rooted..
Afterwards I had phone randomly restarting problems. (And when I upgraded OTA, the bar was stuck for hours and I had to pull the battery to restart phone and get past the Android guy.)
So learned about Odin and thought Id fix by flashing a stock rom.
Odin wouldnt work and when I pulled the plug and went to restart, phone gives me firmware upgrade encountered error message.
Tried resetting.
Tried booting into Safestrap.
Tried every recovery with Odin.
Tried both versions of Kies which odly, Kies wont recognize my IMEI so technically unable to try Kies.
Where do I go from here?
Odin will help u out . First of all check the drivers uninstall them and reinstall the drivers then restart the pc and try it again if it occurs again try to change the usb port and check out the cable ... Btw which odin firmware you are trying to FLash and what was your firmware before flashing ??
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse
Hi,
I have a Hisense u989 pro with a custom recovery installed, I performed a restore from a previous backup. After completed, when wanting to reboot, I saw a msg "No OS installed, leaving the phone connected to my pc and charging via usb, my wife needed a usb cable and unplugged my phone. when I returned some time later the phone was completely dead.
Some issues: Phone not charging or switching on, cant boot into recovery or fastboot, sp flash tool not detecting phone via usb cable, tried different usb cables, cleaned the micro usb charging port. left phone connected to charger for over 24hrs and still nothing. Im unsure whether it could be the charging port or the battery.
Ive got the hisense u989 pro stock rom, i just need it to switch on. Any advise or assistance to resolve my phone issue will be appreciated.\
thanking you