Related
Not sure if anyone can give some advice on this...
If the battery goes dead or if for some reason the phone has to start up,
It goes back to inital config!! - ie: - tap screen to start, set up the phone etc...
all apps, settings etc have gone, as if its a new phone!!
Its highly frustrating and wondered if anyone can help.....
thanks
......just wondering, does the phone have a small battery that keeps its memory??
maybe that needs changing??
Try a hard reset.
how do I do a hard reset?
thanks
is this right??........
# remove the battery cover.
# observe that by the USB port, there is a small indentation. This is the reset switch access.
# Keep the slider closed.
# power the phone on.
# press the “talk” and “end” buttons; while holding them down, use the stylus to probe into the reset switch hole at a 45 degree angle to the major axis of the phone.
# when you get to the “press enter to reset the phone” page, press the center dpad
yep, thats right
didnt work,
when I reset or battery dies etc. It reboots back, as if its a new flash....
have you tried changing the radio and/or the rom?
andy_dutch said:
Not sure if anyone can give some advice on this...
If the battery goes dead or if for some reason the phone has to start up,
It goes back to inital config!! - ie: - tap screen to start, set up the phone etc...
all apps, settings etc have gone, as if its a new phone!!
Its highly frustrating and wondered if anyone can help.....
thanks
Click to expand...
Click to collapse
I Had exactly the same problem
I tryed all the 6.5 rom in this forum and the problem continues
i also tryed changing the radio.
I tryed a 6.1 rom and get the same rhing.
The only solution was flashing the original rom from htc
There is some strange error in this new roms.
I have the same problem!!
Now I have the Salvy C83 v3.3 rom on my Touch dual...
JMD2006 said:
I have the same problem!!
Now I have the Salvy C83 v3.3 rom on my Touch dual...
Click to expand...
Click to collapse
The only way to get the phone running again was to install the original htc rom
And it has to be this one:
http://www.4shared.com/account/file..._13171012_Radio_Nike_1582123_signed_Ship.html
Thanks for the solution, now it works.
i have 2 new builds coming
NOW POSTED build 23420 found here:http://www.mobilitydigest.com/forums/showthread.php?t=1455
NOW POSTED build 23060 found here: http://www.mobilitydigest.com/forums/showthread.php?t=2002
Change log and known issues found at link above as well.
Please post any issue over there please.
Some Pictures Below FROM THE ROM
Hi, I cant seem to Fix the problem with my Wifi and your rom, It goes off after 20 seconds or so! by its self, and i want to get my email, but it wont stay connected..... and i cant figure out why but other than that... love the rom and the awesome window side slide animation
Great Job
kingfarmer said:
Hi, I cant seem to Fix the problem with my Wifi and your rom, It goes off after 20 seconds or so! by its self, and i want to get my email, but it wont stay connected..... and i cant figure out why but other than that... love the rom and the awesome window side slide animation
Great Job
Click to expand...
Click to collapse
ok i will look into the wifi to see if there is an error some where.
i ask please post any issues on the link above please
wifi - i am not having wifi issues - if you have wifi issues please do a hard reset and try wifi again - if you still have issues please post on the link posted above
same here. I tested both a secured and unsecured network without any issues. check your router.
herg62123 said:
wifi - i am not having wifi issues - if you have wifi issues please do a hard reset and try wifi again - if you still have issues please post on the link posted above
Click to expand...
Click to collapse
Ya, thanks anyways, it doesnt seem to go away for me, and i flashed Chrome rom, and it is fixed now.... thanks anyways, and again, great ROM, chrome isnt compared to it. but i like Wifi
am downloading it now (v13).. lets see. will update on ur link if i run across any problems
This is a great looking ROM. Like its almost ripped out of the TP2 or a Hero. Very quick and responsive. One noticeable isssue Ive had is a resizing problem when texting in landscape. Other than that, im also pleased i barely had to install anything, like almost everything i needed was there already.
Kudos
Just flashed this rom and I'm very happy with it. Runs very smooth and fast.
Only thing is I can't find the keyboard selector. Was it cooked in or do I have to install it? It seems the fuze keyboard is selected and this makes using the hw keyboard on a TP kind of difficult.
Awesome work on the rom!
Is all the hardware button working?
freedompeace said:
Is all the hardware button working?
Click to expand...
Click to collapse
All seem to be working on my touch pro including volume control.
I had to install the fuze / pro keyboard selector to get the hw keyboard working correctly.
Home button
Is there any chance to make Home Button open Manila Home Tab instead of WM start menu?
Hmm I installed chome editor 1.6 and now the lower left button (next to the start button) always says action and when pressed tries to start the htc action screen which isn't there. Is there a way to restore this?
First I want to say Thank You for such a beautiful ROM. It's fast, finger friendly, and professional looking. (Love the slider)
A couple things I have noticed are as followed:
1. Under the Notifications options, when I select "New Text Message", then try to select a different sound it scrolls the window behind the drop down box... not the actual drop down box. Same goes for the "Event" box, but only on some. Hard to explain.
2. Minor but annoying - When waking up and the device is locked, the clock jumps to the bottom of the screen then back up to the top.
3. Another Minor thing - "Start" occasionally shows up on the top left of the screen. Is it always supposed to be there or never? I know it brings up programs.
4. GfxBoost (lol "DO NOT DISTRIBUTE") has some icon issued on the bottom left and right. Bottom left (you can only see 1/4 of the windows logo) and bottom right (Don't know what it's supposed to be)
All-in-all i feel this is a fantastic ROM. I'd love to see what else you got up your sleeve. After about 16 hours I was down to 64% battery with hardly any use, but then again I was in the office where I get ZERO signal!
funny, I can only confirm the first issue. This happens only when using a sweep to scroll. When the slider is used it scrolls ok. I have also seen this pn the activesync screen when selecting message delivery schedules.
I'm running without manilla btw. I love Titanium
I am not registered (yet) on the other forum, hence posting here.
Installed v13 and its amazing.. fast and nice graphics..
Only one issue uptil now. In call recording is not working. It gives an error (something like cannot start ICR, wrong certificate etc..) Can I unistall ICR (not in the remove programs list) and install autocall recorder 1.2 instead? tht gives me more options..?
thanks
Thank You
Very nice ROM, thanks! I haven't gone through everything, but all seemes good so far!
Hey herg!
I had no idea you were a chef too! I flashed your rom and it is kick ass so far...
Aside from TF3D being a little sluggish (not that I care since I no longer use it... iPhoneToday all the way... for now ) it have not seen bugs.
BT file transfer - oK
3G connection - oK
ActiveSync - oK
Battery life - pretty good so far
GPS lock on - to be tested later
Wifi - to be tested later
I will try to report some more later on, but so far... kick ass!
love it
i havent updated to D-fresh-est but your doug-e-fresh is an amazing rom thank you for your contributions buddy im flashing this sucka tonight
rajackar said:
Just flashed this rom and I'm very happy with it. Runs very smooth and fast.
Only thing is I can't find the keyboard selector. Was it cooked in or do I have to install it? It seems the fuze keyboard is selected and this makes using the hw keyboard on a TP kind of difficult.
Awesome work on the rom!
Click to expand...
Click to collapse
in 6.5.1 builds the keyboard selector is gone. Instead, hold down the keyboard icon at the bottom of the screen and the selector pops up. That's the good...the bad is that it makes it harder to toggle the keyboard off the screen cause pressing it leads to he selector instead of toggling but that's the build, not the ROM. I'm still loving the ROM
Searching through the Internet for the possible solution regarding "Wake Up from Standby" problem i came across this Article.
The suggested solution for users facing this problem was to deselect the "Auto Adjust Backlight" option from the Power settings menu.
The suggested solution for Kitchen Chefs was to use another Power Application in their Kitchen.
I think that this could be useful for all of us.
for the wake issue, try this it should work :
1) take the flesh.bin, the ACER_EUU and the extrom.bin, from arto's rom,
2) then take the original acer 3.003c and extract the .exe file in a folder with winrar or sevenzip
3) dump the .amf file from it with the toolbyamper
4) now delete from the original acer rom those files: flesh.bin, extrom.bin, ACER_EUU, toolbyamper and the .amf file
5) put the flesh.bin, extrom and ACER_EUU that you take from arto's rom and put it in the acer v3 folder...
here you go !
jeje too complicated this last solution...
i tried solution mentioned by brianmaster and it works...
regrats
How to make what the device with SRS WOW HD 1.5.1.0 woke up?
How it has made Arto in the rom?
I wish to instal RU rom, but srs hd wow only on Arto rom works without a dream!
Sorry my bad English
You must uninstall SRS WOW HD 1.5.1.0, this driver is only for HTC
So on Arto rom works srs wow hd! Also does not sleep!
I even took srs wow hd from Arto rom, all the same on others rom does not work!
SRS WOW HD works only on Sense ROMs like Arto's.
right now use Arto rom, but it would be desirable to put RU rom and to fasten srs wow hd, but ways I so understand was not present (
Wake up solution?
brainmaster said:
Searching through the Internet for the possible solution regarding "Wake Up from Standby" problem i came across this Article.
The suggested solution for users facing this problem was to deselect the "Auto Adjust Backlight" option from the Power settings menu.
The suggested solution for Kitchen Chefs was to use another Power Application in their Kitchen.
I think that this could be useful for all of us.
Click to expand...
Click to collapse
I think that the wake up issue is caused by a conflict between windows and acer relating to the < End Key > fuction.
I've tried this for a day and it works for me:
Of corse uncheck < Auto adjust backlight by battery level>!
preferences-phone-check wake up from sleep
preferences-End Key-choose lock and suspend( hold to suspend)
Settings-System-backlight-battery tab-check both boxes
Settings-System-backlight-external power tab-check both boxes
Settings-personal-buttons-button 2 choose <Today >from menu on the bootom
TO WAKE UP PHONE: PRESS ( < ) button at bottom of device.
This W\Official acer ROM( don't know about settings in cooked ROM)
Also:< SRS-WOW HD> works beatifully on stock Rom
1.Installed SDK certs., .net config.3.5 Then:
2.Install SRS-WOW HD to device ( afer installation finishes *SOFT RESET*)
3.after reset go to settings-Sys-srs wow icon open and make personal adjustments.
Hoping this works for all!
arghh !! I'm still having wake up issue either I'm using v3 flashing tools...damm !!! I have this !
I've went back to Arto's ROM wich hasn't got the wake up issue. But when i used active sync it did again. I disabeld the active sync and then I was perfect again.
So maybe active sync has something to do with it to?
****inglogins said:
I've went back to Arto's ROM wich hasn't got the wake up issue. But when i used active sync it did again. I disabeld the active sync and then I was perfect again.
So maybe active sync has something to do with it to?
Click to expand...
Click to collapse
Did you had some issues with my Modular ROM? If you share it with me, maybe i can make improvements.
Yes, I've treid your modules Rom and really loved it. Unfortunatly I had the wake up issue (i reported it in your tread and you also fixed me a cab for dutch language realley fast
In arto's ROM I don't have the problem unless active sync is on push (or other polling, haven 't tried) no mather wat setting I use for backlight or wake up when a hardkey is pressed.
I think you have to contact Arto because he problely has the solution (since his Roms don't have it......
****inglogins said:
Yes, I've treid your modules Rom and really loved it. Unfortunatly I had the wake up issue (i reported it in your tread and you also fixed me a cab for dutch language realley fast
In arto's ROM I don't have the problem unless active sync is on push (or other polling, haven 't tried) no mather wat setting I use for backlight or wake up when a hardkey is pressed.
I think you have to contact Arto because he problely has the solution (since his Roms don't have it......
Click to expand...
Click to collapse
Well, i am using the Geek Rom since i cooked it, and don´t have any wake up issues.
That is strange then...... Maybe I'll flash your rom again sometime but i'm pretty satisfied with arto's rom so far.
I'll let you know by time
****inglogins said:
That is strange then...... Maybe I'll flash your rom again sometime but i'm pretty satisfied with arto's rom so far.
I'll let you know by time
Click to expand...
Click to collapse
No problem. Arto also makes very good ROMs.
3.003 drivers were supposed to fix the wakeup problem, but it seems there are certain options/customizations that still can create the wakeup problem.
For example, I have had wake up issues on all the ROMs I've tried (Rafyvitto's, Arto's and UFE's).
I have disabled backlight based on light levels and the problem occurs much less often. Currently trying the extended version posted a little earlier (using Acer Preferences, so any key can wakeup from standby, etc.)
I do use activesync to sync with my computer; I do download push mail (from gmail); I do use swype; I automatically download weather info - on any ROM I use... so it is possible that either of these is the culprit...
/Sifaan
In two weeks i didn't have one wake up issue with my ROM.
Autobacklight is on, i don't use the end call button for sleep mode. I just press the power button and S2U2 locks the device.
And i deativated the option to turn the backlight of if the device is not used for 30 seconds.
Possible reason for wake up problem
I am nearly sure that wake up issue occurs when i change something in windows folder. Especially when i change lockscreen, use some programs related to device lock and change start menu icons etc., wake up problem occurs every time regardless of rom (i have used nearly all custom roms)
Hello,
the last 2 times that i had this wakeup issue, the story was the following:
-i received a text
-i went in my incoming box and looked for the message
- next i closed the incoming box by pressing the end key
- screen turned off 1 minute later
and so no way to wakeup my phone !!
Hope it could help, bye.
Kubuntu for the HTC HD2 version 0.1.0
This release is intended to be run via Haret from within windows mobile.
A MAGLDR version will be released as soon and problems have been ironed out.
Consider this a Technology preview and as such is not intended for daily use.
08/01/11 2:30pm GMT: Sorry for the delay in release I've had a few breakthroughs and decided to implement the changes now rather than do several releases in one week. PM me if you can host the files for me.
What is Kubuntu?
Put simply its the debian based Desktop class OS Ubuntu built with the KDE UI instead of GNOME
Whats special about this release?
Built from scratch - Using Rootstock to create a clean fresh ARM Kubuntu 10.10 rootfs.ext2 image with which to start from.
Finger friendly - Uses Kubuntu's Plasma Netbook UI tweaked in detail by me to allow for optimized touch experience without compromising on screen space.
Some examples:
Hide titlebar and menu bar on maximized windows - Menu, close and unmaximize all tucked into the top panel.
Unmaximized windows have big buttons on the titlebar.
Large fonts in menus
Easily switch between open apps - Uses Desktop Effects to zoom out and present all open windows in a sexy grid, all from a quick tap of the top panel
Better experience - Some niggles from the original Ubuntu 0.2/0.3 release have been addressed:
Better Keyboard - kvkbd - comes with Kubuntu already
Better click and hold options - Thanks to Clickity you can customize your click and hold experience
Overhaul of connectivity options - Completely rewritten connectivity scripts to include intelligent notification tray icon and messages to inform you of 3G/Wifi/USB modes and Internet connectivity. Store settings and choose what option you require on startup. All accessed from a little connectivity icon at the bottom of home screen
==Note: Not quite finished this yet, waiting till i have finished it and packaged it into an installer so HD2 Ubuntu 0.3 users can have it too before i release my kubuntu build. Fingers crossed its only an hours work away.
What Works
3G - Added system tray notification support, Showing if 3G is on and also if it is connected to internet or not.
Wifi - Uses WICD. Default network-manager almost worked, it showed available wifi points but could never complete a connection, reverted to WICD
USB Host - connect lots of different usb devices. See this for instructions
USB Network (Not been able to use internet sharing as yet but can ssh)
SMS and Phone using latest ofono 0,25-1 and Sphone 0.0.5 - no sound tho
Battery notification! - Works perfectly giving status in taskbar, Icon shows charge level, plugged and unplugged icons too.
What still does not work - Mostly Kernel related I am not working on these currently I have simply made a new filesystem see htc-linux for info.
Sound
Bluetooth
GPS
Accelerometer
Hardware buttons not functional
No Screen Rotation
Suspend/Sleep - Power management set to turn off screen after 4 mins to conserve battery. Set in Power saver mode when unplugged Performance when plugged.
Q&A Bugs issues and Workarounds
There is no keyboard on login screen and I need to enter a password i I have enabled paswordless login so just click the (>) to login.
Keyboard Closed - Click on Home at the top left and reopen kvkbd.
Press and hold does not right click - Clickity should be on the taskbar, if not open from Utilities on Home screen. You can toggle the press hold action by pressing the mouse taksbar icon repeatedly until the icon shows the required function.
Freezes -
Can happen if your running something intensive. Wait a few minutes without touching anything and often it comes back to life do not repeatedly click anything you will make it worse.
Often its just one app causing the problem. Bring up the keyboard with floating shortcut and the following shortcuts may help (Click it once and wait a mo if your system is freezing):
Ctrl + Alt + Esc - Turns the pointer into a skull and crossbones app killer, next click on the unresponsive app to kill it.
Alt + F4 or Ctrl + Esc - Normal Close.
Ctrl - Alt - Backspace - restart the x-server
Other useful keyboard shortcuts
Win + D - Go to Home/Desktop
F11 - Fullscreen App toggle, only for some programs.
Alt + Tab - Switch to previous open window
Install Instructions
Extract the linux folder to the main directory(!) of your Storage Card.
If the linux folder is not located in the main directory of the Card,it will not work.
Note: This will not touch your phone's internal memory. WinMo or other Linux/Android builds remain unchanged.
Startup Advice
1) Save all your current work and start the HaRET executable in the linux folder of your SD card to boot Linux.
2) Wait a few moments untill you see the Kubuntu login screen. Do not press anything and it will auto login after a 10 second delay.
If you accidentally click the screen you will notice the password vanish and there is no keyboard! Never fear passwordless login is enabled so just click the (>) to login.
3) Enjoy
4) Shutdown using the power icon on the top panel.
Thanks and references
Big thanks to the usual suspects for all their hard work on porting Linux to HD2:
Lucas David-Gorris - dcordes
cr2
NetRipper
Markinus
LeTama
Cotulla
dan1j3l
Parad0XUA
manusfreedom
Roll your own Linux
http://htc-linux.org/wiki/index.php?title=Ubuntu/Leo
Some parts are not yet up-to-date but dcordes promises to update soon. Perhaps I should document my own experience to add to the existing wiki.
Get the Linux kernel souce code:
git clone git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git htc-msm-2.6.32
Compile Linux kernels for your HTC
http://htc-linux.org/wiki/index.php?title=QuickDeveloperStartGuide#Kernel
Sphone
Clickity
WHATS NEXT FOR HERESANDYBOY?
Working on XUBUNTU rootfs at the moment - should be speedy
Testing KUBUNTU 11.04 MOBILE currently - its no where near usable frankly may be better to wait for a proper release.
Will be keeping an eye on htc-linux for new kernel updates and Ubuntu for HD2 for improvements and fixes.
Pictures and Videos
New Pics, More to come soon...
KDE on HD2. AWESOME!!!
OOOhhh, Exciting!
Can't wait to see the pics!
Good job!
Great!! I Cant wait to try it out thanks a lot for ur work!!!
this sounds crazy man, awesome work, I cant wait to have this on my hd2
Wheres the download link :0?
So the only difference between this, and dcordes version is the interface? Anyways looking forward to seeing the progress on it.
So cool! There's so much new stuff going on with the HD2 right now! Awesome that we now have a choice of gnome or kde, thanks for sharing man, real good stuff
~HD2 Android~
Screen shots Sir
Have any beta version can download
ricky886 said:
Have any beta version can download
Click to expand...
Click to collapse
My apologies to everyone for the delay in release.. I have a few more bugs to iron out mainly performance issues and i've expanded my own software to handle network mode notifications etc even further so it should be fully comprehensive. Im also looking into modifying sphone to work better on HD2, I've already revised the icon set so the ugly black and white network signal icons are now beautiful. I will release this as soon as I am happy it runs perfectly. A couple more days and you will have all my efforts to play with! Please anyone get in touch if you can host the download for me and I will send you a copy as soon as I am ready.
The wait is almost over!
heresandyboy said:
My apologies to everyone for the delay in release.. I have a few more bugs to iron out mainly performance issues and i've expanded my own software to handle network mode notifications etc even further so it should be fully comprehensive. Im also looking into modifying sphone to work better on HD2, I've already revised the icon set so the ugly black and white network signal icons are now beautiful. I will release this as soon as I am happy it runs perfectly. A couple more days and you will have all my efforts to play with! Please anyone get in touch if you can host the download for me and I will send you a copy as soon as I am ready.
The wait is almost over!
Click to expand...
Click to collapse
I aggree,
its better to make it run smooth than people cry "something is not working"
P.S. I can host it on my Rapidshare account.
Greetz Tokl
kde and HD2.This will be exciting....
waiting anxiously ... hope the result is awesome .. good luck
deadman_walking1 said:
waiting anxiously ... hope the result is awesome .. good luck
Click to expand...
Click to collapse
A nightmare has befallen my HD2, the usb port has come loose and I am unable to charge it to complete this work, I have just ordered a cradle with spare battery charging slot so when it arrives I'll finish the last bit of work I have to do. I managed to sort out most of the performance issues and am really happy with the battery life, general usability and finger friendliness. Theres just a bit of testing to be done on my custom made software and its ready to go! Devastating I cant test usb host mode. Guess I'll have to find a HD2 with the spare parts I need on ebay as repairing the usb is not an option, theres nothing to solder back its torn the connections on the board.
heresandyboy said:
A nightmare has befallen my HD2, the usb port has come loose and I am unable to charge it to complete this work, I have just ordered a cradle with spare battery charging slot so when it arrives I'll finish the last bit of work I have to do. I managed to sort out most of the performance issues and am really happy with the battery life, general usability and finger friendliness. Theres just a bit of testing to be done on my custom made software and its ready to go! Devastating I cant test usb host mode. Guess I'll have to find a HD2 with the spare parts I need on ebay as repairing the usb is not an option, theres nothing to solder back its torn the connections on the board.
Click to expand...
Click to collapse
have you looked at following the tracks on the board towards the closest part, and solder a wire between that and the connector?
it's close to what i done on my modified usb hub to bypase the diode which original protects the host usb port and controller chip, so the external powersupply powers everything.
plopper
heresandyboy said:
A nightmare has befallen my HD2, the usb port has come loose and I am unable to charge it to complete this work, I have just ordered a cradle with spare battery charging slot so when it arrives I'll finish the last bit of work I have to do.
Click to expand...
Click to collapse
OH MY GOD...THEY KILLED HD2!!!
I´m deeply sorry for that, I would donate some cents (if I only could... <--undergraduate)
Can someone uploas some pictures? thanks
heresandyboy said:
A nightmare has befallen my HD2, the usb port has come loose and I am unable to charge it to complete this work, I have just ordered a cradle with spare battery charging slot so when it arrives I'll finish the last bit of work I have to do. I managed to sort out most of the performance issues and am really happy with the battery life, general usability and finger friendliness. Theres just a bit of testing to be done on my custom made software and its ready to go! Devastating I cant test usb host mode. Guess I'll have to find a HD2 with the spare parts I need on ebay as repairing the usb is not an option, theres nothing to solder back its torn the connections on the board.
Click to expand...
Click to collapse
This is Sad ... i will still eagerly wait for it ... please also add sound to it .. i guess this is without sound .. isin'it ?
Both the on-screen keyboard and the menu keep annoyingly popping up on my Viewpad7. It is driving me crazy.
At some point I thought it had to do with how I moved the device around, but I still think it's a random thing. It was/is a problem before and after loading it with a custom rom.
Is this a known hardware (or software?) bug ? If so, is there a cure for this? I have looked for settings, but was unable to find them. Thank.
SWVer=3.16K
MODEL=FM6-0001
HWVer:103
Android 2.2.2
Hi
Have the same problem and some other users here too.
Seems the Touchscreen/Softkeys are faulty and have to be replaced.
I bought mine 1 week ago and day by day it went worser. I didn't upload a custom rom so far, so it's a stock problem.
Now every 2nd time I take the device it vibrates and menu/keyboard keeps popping up/down. Looks like, the "menu" softkey does his own business, right?
Also the G-Sensor/Compass seems to be defective for me - after a few hours I have to calibrate always.
I made some videos, look at this thread:
http://forum.xda-developers.com/showthread.php?t=1258052
Where have you bought yours?
Regards
With my device it was when I held it in landscape mode and touched the bottom part of the right side or the rightmost part of the bottom of the device itself. It was also HWVer 103. You will most likely have to get the screen and soft keys replaced like I did.
Sent from my ViewPad7 using XDA App
Or, it could be just be a "normal" thing with Froyo OS itself, I've noticed it on 2 newer build - both ITE enabled - in U.S. market.
SWVer=3.41
MODEL=FM6-0001
HWVer:107
Android 2.2.2
This happened only on certain Apps - even when Auto Rotation under Settings are turned off, it will switch to the "opposing" mode and won't go back once it make that orientation change, i.e. YouTube whereas Angry Birds will stay landscape all the time. Device has been calibrated & sensors working, as I had no issues with GPS status & Maps, etc.
Should be a simple fix or patch on the OS or custom ROM .... BTW, I'm running the stock, rooted 2.2.2 ROM while waiting for an OC one with the ITE kernel working to boost the Quadrant scores, LOL.
Ours seems to be more a hardware problem since it happens anywhere, with autorotation on or off, after a complete hard reset (without any additional apps installed) and simply by touching the case itself (not the screen)...
astuermer said:
Ours seems to be more a hardware problem since it happens anywhere, with autorotation on or off, after a complete hard reset (without any additional apps installed) and simply by touching the case itself (not the screen)...
Click to expand...
Click to collapse
Hmmm, interesting after I checked out a few YouTube videos & it sounded like it's all HWVer 103 yet running Froyo 2.2.2. Is the device ITE enabled as I noticed that the pop-up keyboard is "standard" whereas mine has Swype style keybaord with ITE.
It's a pain to get it returned, exchanged & repaired at the authorized factory service center and be without the use for 2+ weeks, unless one's within a 30 days period & can send it back to the place of purchase for a new one (could take just as long)
Another post mentioned a new stock ROM just being released, it might be worth an effort or try to flash it (FM6-3350-0-1008-A01.nb0) upon downloading & using the SUTL3 app to do it - would need to root it again - if one is brave enough (since it's going back for repair/exchange anyway?)
BUT, I'm guessing whether this newly released stock ROM is for ITE devices vs. non-ITE ones with HWVer 103, 106 and 107's ???
The button clicking by itself or when under vibration is an HW fault.
pulling the back off and wedging some paper near the touch IC to keep pressure on it has fixed mine.
Brought it back to the store for repair. I think they put a new screen and cover (back) on it. Works like a charm.
flez1966 said:
The button clicking by itself or when under vibration is an HW fault.
pulling the back off and wedging some paper near the touch IC to keep pressure on it has fixed mine.
Click to expand...
Click to collapse
Can you describe more precisely how and what did you do or can you (better) do some photos?
Did you pulled off a back cover and inserted a piece of paper somewhere?
Need to experiment
Software solution
This is a solution from a user 'retrochip' from 4pda.ru forum
(Link to original post in Russian and i'm not able to post is here)
1. Root your device (can be done with Gingerbreak)
2. Find out codes for Menu button and Search button (229 and 217)
3. Edit configuration file /system/usr/keylayout/qwerty.kl (you can use RootExplorer)
In qwerty.kl:
Find text:
key 217 SEARCH WAKE_DROPPED
and change to:
key 217 MENU WAKE_DROPPED
Find text:
key 229 MENU WAKE_DROPPED
and change to (just comment it with #):
#key 229 MENU WAKE_DROPPED
Save and reboot.
Now Menu button isn't active and Search button works as a Menu button.
No annoying random popping keyboard anymore.
This has killed my all soft buttons, now the only option is to fix it in adb, because screen keyboard doesn't appear in terminal, I need to touch menu then screen keyboard.