Ipl 2.20.0001
Spl 2.15.001
need help which Rom support this type of IPL and SPL Need Rom
harry_01 said:
Ipl 2.20.0001
Spl 2.15.001
need help which Rom support this type of IPL and SPL Need Rom
Click to expand...
Click to collapse
The all do, but if you use the "new" way to upgrade (this is the method used by every recent ROM) you need to change your SPL first.
You do that temporarily with JumpSPL/SoftSPL or semi-permanent with HardSPL.
Take a look at some Sticky topics and the WIKI pages, it will clear things a bit before you dive into the deep unknown...
One point, your device is a G4, make sure you use the G4 HardSPL/SoftSPL.
Related
i upgrade the ROM using this :
http://forum.xda-developers.com/showthread.php?t=283965
but I would like to downgrade it again to send for repair ...
i cannot flash it back to the original IMATE JAMIN rom , always stop at 95%.
Please help.
Just wait, suddently it continue.
Regards
"Just wait, suddently it continue."
No, it doesnt. Error msg comes out and forces you to it.
SPL can not be easily downgrade by flashing ROM in a G4.
Same problem
I have same similar problem.
I created new topic. I guess my topic more explanatory.
Lets go on here -> http://forum.xda-developers.com/showthread.php?t=331474
thanks..
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
When you first flashed HardSPL, which verson of the SPL was shown after reboot? That, what you had before, or the new one, of the HardSPL? I am asking, because I managed to keep the original O2 2.15 SPL and I really dont want to channge it (for repair reasons
After flashing the patched HardSPL I see 2.G4.4PDA (I have a G4 XDA Neo)! But the good news are that you now can flash all SPL versions you want, like the original 2.15 when it's inside of your ROM image and you can see it after rebooting!
How to use Hard SPL if a can't pass bootloader?
I tryed hard SPL, but after upgrading it back to 2.20.001., and I can't pass even to "Windows mobile" screen and it is frozen this position.
Any suggestions?
Thanks
Before flash ROMS, My phone is T-Mobile MDA, IPL 2.21.0001 and SPL 2.21.olip.
It cannot boot because I flash it use ROM with IPL and spl. now IPL 2.21.0001 SPL 2.21.
now power is three color screen !
Help me !!
sanp007 said:
Before flash ROMS, My phone is T-Mobile MDA, IPL 2.21.0001 and SPL 2.21.olip.
It cannot boot because I flash it use ROM with IPL and spl. now IPL 2.21.0001 SPL 2.21.
now power is three color screen !
Help me !!
Click to expand...
Click to collapse
Sorry dude, it's a brick if you have G4 IPL mixed with a G3 SPL..
Man, you really need to read the sticky's next time!
You've propably flashed a rom that includes IPL/SPL on a G4 Device.
SPL 2.20
Hi, I have the same problem...
I make a download from another site like 2.20.0001 but SPL was 2.20.0000...
I tryed any solutions but get no results.
Help me. How can I flash my S200. I try to use JAFWM but ask me for Pkey.
I don't know what to do.....
the-equinoxe said:
Sorry dude, it's a brick if you have G4 IPL mixed with a G3 SPL..
Click to expand...
Click to collapse
I get the same problem,how can fix item?
this fix is quite easy.
Just download a original rom for your device. Search the forum.
you can also try KhanX Extended ROM
small 10mb so it does not take long to flash.
http://forum.xda-developers.com/showthread.php?t=365376
hope this helps.
It is definite not a ROM-only problem.
As xecutionkrk said, try to flash with your original stock ROM, it may be possible to restore the IPL and SPL version.
If that doesn't to the job, then it is another type of brick.
starkwong said:
It is definite not a ROM-only problem.
As xecutionkrk said, try to flash with your original stock ROM, it may be possible to restore the IPL and SPL version.
If that doesn't to the job, then it is another type of brick.
Click to expand...
Click to collapse
It's impossible to flash a rom on a device which has mixed (G3/G4) IPL/SPL.
Due to block-size differences between G4 DoC and G3 DoC (Disk on Chip) the device is unable to write.
OK, learnt from that.
However why is it possible to write G3 SPL to G4...
Did you read this yet?
http://forum.xda-developers.com/showthread.php?p=1177659#poststop
Check out the Wizard Love Rom.... Don't panic yet.
Good luck.
PeterClayton said:
Did you read this yet?
http://forum.xda-developers.com/showthread.php?p=1177659#poststop
Check out the Wizard Love Rom.... Don't panic yet.
Good luck.
Click to expand...
Click to collapse
Thats for if you are stuck on bootloaders with the same G4 IPL/SPL to recover back to normal,but not to not to recover from a 'Bricked' phone due to a mixed G3/G4 ipl/spl.
Cheers!
starkwong said:
OK, learnt from that.
However why is it possible to write G3 SPL to G4...
Click to expand...
Click to collapse
Because the already loaded SPL is the correct one, and it will write the incorrect G3 SPL with the right blocksize to the DoC.
After reboot the new bootloaders are being utilized for the first time, and then the troubles begin, the "new" G3 SPL will be read correctly, but is unable to read or write to the DoC.
JTAG* would be the only solution to solve this problem.
*JTAG for HTC wizard is NOT available (-no known test points, no real datasheets for omap 850 in order to find these test points, no real omap850 datasheets available for timings and commands in order to succesfully communicate).
Hi Guys,
I need to downgrade my phone for warranty purposes. Can any one of you give little further detail about what I need to get back to orginal rom/radio/spl and bootloader. Or in short to be able to send it back for warranty as for some reason my phone keeps dropping the GSM signal(tried flashing GSM-Radio and OS roms but no luck).
Following specs worked great for almost 6-8 months and now keep dropping signals
These were the specs from current ATT 8525 (HERM100)
AT&T 8525 (Hermes 100)
ROM: vp3G's WM6 v3.60 "Full" + Add-Ons
Radio: 1.54.07.00
IPL: 1.04 | SPL: 2.10.Olipro
I have already flashed OS and GSM ROM back to the latest ATT ROM from this link (http://www.htc.com/us/SupportDownload.aspx?p_id=65&cat=2&dl_id=67). So current specs under device information are
AT&T 8525 (Hermes 100)
ROM: 3.62.502.3
Radio: 1.54.07.00 (This is not showing as currently there are no signals on phone)
IPL: 1.04 | SPL: 2.10.Olipro
Or do you think I should flash the device to the original ATT ROM (factory installed) from this link (http://www.htcamerica.net/support/8525/software-downloads.html).
Once this is done, I wish to rollback SPL and Bootloader back to factory settings. I am not sure the original version of the spl and bootloader. So if you think it's anyhow possible, can you guide me through the instructions?
I have 10 days before I return my current device with replacement unit.
Thanks in advance
AJ
Downgrading SPL and ROM
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
nbhor said:
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
Click to expand...
Click to collapse
Great !! Worked like Charm !! Back to factory settings and ready for replacement.
Thanks mate
i think we need a radio update or change it but i don't know how cuz i'm g4 and i think it's CID locked ( i appreciate if u tell me how to know locked or not) i updated the rom with soft spl but the radio i don't know what to do my radio now 02.25.11 and i'm having the cannot excute errors what to dooooo helppppp ?
..............................................
i just tried T-Mobile-UK_2.19.11_Radinly and it doesn't start the progress telling me not for u something like that i don't remember
is there is radio official from imate k-jam ?
All of the radio ROMs are official. You just need to download and simply flash one. Since you have a G4, it cannot be CID unlocked, but you can and should apply HardSPL to it so that you can flash more easily than SoftSPL.
ashasaur said:
All of the radio ROMs are official. You just need to download and simply flash one. Since you have a G4, it cannot be CID unlocked, but you can and should apply HardSPL to it so that you can flash more easily than SoftSPL.
Click to expand...
Click to collapse
i'm already flashing with soft spl i don't know how to flash with hard spl and i'm afraid form it so is there is a way to flash the radio with soft spl for g4 ??????
No. You need to apply HardSPL first, its a simple process. It doesnt "flash" anything really, it just "updates" the Wizards IPL/SPL to a semi-unlocked version...you needint worry, its been tested and has worked for years.
ashasaur said:
No. You need to apply HardSPL first, its a simple process. It doesnt "flash" anything really, it just "updates" the Wizards IPL/SPL to a semi-unlocked version...you needint worry, its been tested and has worked for years.
Click to expand...
Click to collapse
ty for ur support i just didn't want to hard spl for the radio it's a little issue but i'm really gratefull for u thanX
i just hope if there is anything except the hard spl
Nope, without HardSPL it is not possible...why dont you want to HardSPL it anyways?
it's just i liked the soft spl cuz the temporery thing the hard spl u know semi permenant and in the remove hard spl post it doesn't have the imate k-jam spl and ipl so i'm worried a little i thought today about the hard spl and i'm still reading to get it all in my mind to flash any rom (g4 safe) ofcourse with completly fredom that's it by the way my radio 02.25.11 and i want it 2.07.10 my old one or the 2.19.11 this one i want it it's recommended by users i'm very thankfull for u by the way
Well let me ask you this then, are you worried about not being able to remove the HardSPL because of warranty concerns? If so than I understand, but if not, there is really no reason to remove HardSPL after you apply it.
ashasaur said:
Well let me ask you this then, are you worried about not being able to remove the HardSPL because of warranty concerns? If so than I understand, but if not, there is really no reason to remove HardSPL after you apply it.
Click to expand...
Click to collapse
naaaah there is no warranty now i just afraid cuz of returning to an official rom
u know sometimes the update process fails and i need to go back to my wizard love or an official imate k-jam rom and i think that's get hard spl complicated and makes some problems am i right or what??? plz notice me
No, HardSPL makes no difference in flashing the Wizard LOVE or carrier ROMs, it in fact makes it easier...no need to put the device in bootloader mode to do it. I am telling you, HardSPL will make your life much easier as far as the Wizard is concerned.
ashasaur said:
No, HardSPL makes no difference in flashing the Wizard LOVE or carrier ROMs, it in fact makes it easier...no need to put the device in bootloader mode to do it. I am telling you, HardSPL will make your life much easier as far as the Wizard is concerned.
Click to expand...
Click to collapse
coool thx for ur help i'll sleep now and in like 8 hours i'll read about the hard spl to do it right thx for ur help alot
i wannted to mention that i think from reading that the soft spl and hard spl is the same but the soft spl every time i flash i have to use and i don't think that it is hard or boring so
tell me experts what will happen to my k-jam g4 if i did this
copy the nk.nbf from the RADIO rom and put it in the soft spl folder like we do in Regular Roms to flash it
the nk.nbf from the rom only has a gsm i checked no spl or ipl or extrom or os or splash nothin just gsm
so what will happen to my runing rom TNT 19209 pro
i wanna know if it will addition the gsm only or it will brick my Wizard
Hallo. Can I go back to my previous SPL/IPL??I unfortunate upgreated my G4, WIZA 200 to 3.08..I have no idea how to go back or just make 2,25, 2,26..for instance. It was: IPL 2.21.2.126 SPL 2.21.0001.AND IT IS still CID-locked!!!! PLEASE HELP.
Read this closely to be sure, but this is how people remove HardSPL by using SoftSPL to flash their original IPL/SPL over the HardSPL. I think this is what you are looking for.
http://forum.xda-developers.com/showthread.php?t=342744