MBW-100 and the athena Roms / Software - Advantage X7500, MDA Ameo ROM Development

Hello Athena users,
i have the MBW 100 by sony ericsson and now i am using the smartwatch latest version v1.0.1.1 posted here
http://forum.xda-developers.com/showthread.php?t=362218
i have used also the other accplication bt watch listed here
http://forum.xda-developers.com/showthread.php?p=1960856
i am encountering bluetooth headset loss, (jawbone) whenever i get a call it works for a minute or 2 then disconnects for 10 seconds (diverts from headset to speaker) and then it connects back to t he jawbone fine.
Lots of itmes i get occasional loss in connectivity between the watch and the phone and notice that i have to click on a button from the watch bottons to reconnect it again.
My question to you is, what sthe bext version of BT watch or smart watch to use and wit what rom for the watch to be effective, all i care about is knowhing when i get emails tect messages and a phonecall with a caller ID . dont care for anything else. please help me as to what rom you chose that is stable and works with the BT watch mbw-100 thank you for your feedback in advance, (some roms drain the battery of te watch within 7 hours like the ap3) ap4 was ok and ap5 is ok, it lasts 2 days)
what sofrtare you use, what version and with what rom, do you get occasional loss in bluetooth connectivity? what should i do? anyway to improve bt ?
Thanks a lot
radio version 1.57 and spl3.5

dj_gabzz said:
My question to you is, what sthe bext version of BT watch or smart watch to use and wit what rom for the watch to be effective, all i care about is knowhing when i get emails tect messages and a phonecall with a caller ID . dont care for anything else. please help me as to what rom you chose that is stable and works with the BT watch mbw-100 thank you for your feedback in advance, (some roms drain the battery of te watch within 7 hours like the ap3) ap4 was ok and ap5 is ok, it lasts 2 days)
what sofrtare you use, what version and with what rom, do you get occasional loss in bluetooth connectivity? what should i do? anyway to improve bt ?
Thanks a lot
Click to expand...
Click to collapse
I use your same version of software on COM1 and I ended up reverting to WM5 which on the MBW150 side is very good (wise choice not to get the spl3.5 one way ticket).
-No random disconnections during standard use
-Still random disconnections of the watch while on headphones, but I disable MBW long pressing the lower right button and reactivate it after the call)
-Disconnections from the watch when I use voice command (same long pressing trick as I'm expected to make a call)
-MBW's Battery still full after three days of continuous use
-Bt stereo streaming perfect, apart from initial short lack of sound during MBW data communication (I disabled join stereo with schap's Advanced Configuration Tool).
Going back to Athena's roots in my case did the job. In fact WM5 fits my needs (everything I need works fast and as expected) and I can rely on a secure and discreet connection with it through the watch. I'm only missing gps on the camera's thrills which seems to be a wm6 only option.
I'm curious about the AP5, but will wait for the Vanilla version to check it.
See my signature for the other testing I made...

Thank you for the reply Karmarock,
i have heard that wm5 gives the best battery life but i am already using spl 3.5 and i dont like wm5, i like the instant search feature of wm5 in emails text messages and many other things that wm6 has . as for the software i guess none is stable that dont cause the watch to disconnect..

Related

Bluetooth Stacks for O2 XDAII running Sin's WM2003SE Build

Hi,
Can anyone point me to some working Bluetooth Stacks for the XDAII that will run on the WM2003SE upgrade please.
My matey has upgraded his XDAII using Sin's merged WM2003SE upgrade (worked great for a Vodafone network!) and installed the MS BT Stack however this only gives partial results when using BT.
He is able to use the headset etc without any problems however when he tries to use the XDAII in his BMW (2005 model 320ci, built-in BT) he is getting intermittant results i.e WM2003SE connects with the car and the headest without a problem however there is a delay before the car picks up the phone when its ringing and on most occasions simply drops the call.
I wanted to know what other stacks are out there that may be worth trying, I have downloaded Toshiba's BT stack and the Widcom stack but I don't know of any others...
Advise much appreciated..
Godz
i too would love to know this.
BuMp
Me too! The widcom stack has a useless headset driver as far as I can read..
I installed http://pdaphonehome.com/forums/showthread.php?s=&threadid=43210 but I am getting out of memory error.. It may be from a XDAIIi??? It also diod a hard reset...
FWIW, to those that have the BMW bluetooth, You will find the first time you make or recieve a call, you have to do it twice. IE dial the number, it will not connect, then redial and it works.
Same when you get a call, answer, it wont connect, then answer a second time and it will connect.
After the first call, it will then work as you would expect.
If you dial directly from the phone it will tranfer to the car kit, but not until the other party actually answers, you wont hear the ringing of the phone.
The big frustration is that although you get sound from the car speakers, I think its only the microphone in the phone that is working. So the other party may have trouble hearing you if your phones in a brief case or your pocket.
Hope that helps
Jon
2003 M3 with BMWBT
Can anyone tell me if the translated chinese rom has these faults?

BT hands free Fix??? Maybe..

I think I found a fix for the BT Hands Free not working the way it should.. I can even use call waiting now and it does not kill the mic when I switch back to the first call..
I set the phone settings to automatically pick up after one ring.. No, it will not automatically pick up after one ring but, now I am getting the name to display in the caller ID field of my xLive mp3-BT headset. and it is working consistently.. I HAVE NEVER gotten it to work consistently before.. NEVER. i will try it with my Jabra BT800 later too.
I think it makes a "deeper" or better connection by making the phone try and make the BT headset device automatically answer???
I am using 2.20 OS and it is the only one that I have found to work, (not fully but it does work BETTER), please try this with other Hands Free devices like car kits and HBH660 etc.. Also try this with 2.02 and 2.06
ccrrazzzy said:
I think I found a fix for the BT Hands Free not working the way it should.. I can even use call waiting now and it does not kill the mic when I switch back to the first call..
I set the phone settings to automatically pick up after one ring.. No, it will not automatically pick up after one ring but, now I am getting the name to display in the caller ID field of my xLive mp3-BT headset. and it is working consistently.. I HAVE NEVER gotten it to work consistently before.. NEVER. i will try it with my Jabra BT800 later too.
I think it makes a "deeper" or better connection by making the phone try and make the BT headset device automatically answer???
I am using 2.20 OS and it is the only one that I have found to work, (not fully but it does work BETTER), please try this with other Hands Free devices like car kits and HBH660 etc.. Also try this with 2.02 and 2.06
Click to expand...
Click to collapse
umm. a bit confusing. care to rephrase.
In depth
With 2.02 or 2.06 or the Sin's merged OS, ANY BT headset device or car kit device that needs to use the Hands Free profile, the mic does not work on the device and there is sound that comes out of the XDAII speaker and only the mic on the XDAII works.
People can not hear you when the only mic that is working is on your phone..
Now on the 2.20 translated OS, Hands Free profile does work BETTER. It does not work fully! The caller ID is not displayed right all the time and the most frustrating part is, when the phone receives a call on call waiting, you can switch over to the other call BUT when you switch back, it acts like 2.20-2.06 and the mic only works on the phone, not on the BT device and both the speakers are going giving you a "stereo" affect.
Well, why not just use the Headset Profile you ask???
I LOVE the ability to be able to scroll through my recent call list, see who is calling via the small caller ID display on my BT device and make phone calls... ALL without having to open up my PDA case or look around for my briefcase and find my XDAII.
I have all the power of a regular phone on my ear or around my neck.
BT devices that need to use Hands Free profile are ones like the BT800
http://www.expansys.com/product.asp?code=BT800
or The HBH 660
http://www.expansys.com/product.asp?code=114271
or the new one that has not been released with the only difference of it has a battery life display too.
http://www.expansys.com/product.asp?code=118678
xLive
do a search at http://www.expansys.com/ for xlive.
The xLive MP3 player - Hands Free phone device also allows me to punch in the numbers with the little joy stick and make a call. (It has other bugs though. Wait until a newer version than 1.23c comes out. They still have the old version listed. http://www.alfa-tech.com.hk/index_download.html )
Other devices that require Hands Free profile, are devices like Car Kits..
They require Hands Free profile so the caller ID is displayed and and other more robust feature can be activated.
Headset profile does not support caller ID nor other more powerful features.
My fix...
With the Hands Free profile, and setting the phone to auto answer after one ring, the caller ID is displayed with the name if it is in your contacts AND most importantly, the duel speaker and only mic on the XDAII thing does not happen when you receive another call and switch back to the original call. :lol: :wink:
Hello,
I have stumbled upon the BT problem also, and am having problems since then. I installed BT Tools, and removed the handsfree setting, but still a lot of problems.
I was quite happy seeing your post, so i Removed BT Tools, paired my HBH-660, and used your "fix".
Obervations:
When pairing, the ppc asks to set the headset as handsfree devide, and twice to set is as headset. When clicking Yes for the three, my PPC
does the following: When set not to auto-answer, the phone number is displayed on my headset, when answering, the stereo and mike effect appears.
When set to auto-answer, the phone number is displayed once, when clicking to answer the call on the headset the headset stops, the handsfree icon dissapears on the ppc, the headset icon appears, and a normal conversation is possible, without stereo and mike effect.
When i only select handsfree pofile when pairing, the stereo and mike effect appear with and without auto-answer.
I also never get the name in the display, only the phone number, eventhough the name appears on the PPC, is this a setting somehwere, or just my headset (HBH-660)
Conclusion
What OS are you using?
I am assuming 2.02 or 2.06 with the registry hkey local M, software, Microsoft, Bluetooth, "HandsfreeProfileOn"
On my Jabra BT800, I still only receive a phone number if I do not have their number in the PPC call history or as long as it is not in my Contacts too.. IE.. It only displays if it is a brand new number.
On the Xlive, it displays the number or the name, no matter what.. Well that is until the xLive times out.. Now do not go out and buy one yet, my version 1.23c is the newest OS but it needs an update. It only works for about 10 min and then you have to turn it off and back on and push the BT button 2 times and then it will work again for another 10 min!!!! :evil: :? This also happens on my wife's MPX300 with the latest ROM so it is not a problem with the XDAII software.
Bottom line = With the 2.20 OS and my "fix", The stereo affect is gone on all of my devices.. ANYCOM HS-880, Jabra BT800, Xlive XBM-100, Motorola HS810 and some other Motorola BT headset that has a AAA battery in it..
(Yes, I have bought a lot of them.. I loose things and I was hoping they would work.) :roll:
Now about your 2.02 or 2.06 OS, When you said, "When set to auto-answer, the phone number is displayed once, when clicking to answer the call on the headset the headset stops, the handsfree icon dissapears on the ppc, the headset icon appears, and a normal conversation is possible, without stereo and mike effect. " I would like to know what happens when you set it to answer on 2 or 3 rings, maybe it will display the caller ID longer. Also, I would like to know if the stereo affect comes back when you get another call on call waiting.
I tried it in version 2.06 and it does not work. It can connect the bt earpieces, but no sound. It kills the connection with the original MS bt stack as well.
I believe the OS you are using is 2.20, just wonder is it a Simplified Chinese OS ?
adad said:
I tried it in version 2.06 and it does not work. It can connect the bt earpieces, but no sound. It kills the connection with the original MS bt stack as well.
I believe the OS you are using is 2.20, just wonder is it a Simplified Chinese OS ?
Click to expand...
Click to collapse
If you use OS 2.20 the problem is gone. During pairing select ONLY the first time is asks for Handsfree/headset. Discard the second time. (I Don't know why exactly)
Be aware that no matter how "simple" a headset looks, they have their own set of problems by themselves, not only XDA-II related.
And BT specs for protocol 1.2 is already out there....
:?
Man!!!! I do not know what is up now! :x :? :shock: :evil: :twisted:
On my BT800, I have tried setting it to No Auto Answer, un paring, re pairing with Selecting Yes to Serial, AND YES to both Handsfree/Headset prompts and I can not get it to mess up when another call comes in.
I have tried Selecting Cancel to Serial, Yes to the first Handsfree/Headset prompt and No to the second.. Still no problems.
I have tried only selecting the second Handsfree/Headset prompt and still no problem..
Now, remember, the BT800 sucks! The caller ID is not working BUT that is a Jabra BT800 issue.. It just sucks! Same problem with no caller ID on my wife's MPX300.
The only thing that I can see as my problem was I used to have BT Tools installed and I never could get it uninstalled all the way until I renamed the bthserial.dll. So, I am assuming that BT Tools also had it's own DLL for Headset too???!! Thus that was my problem? I guess.
So, my "fix" is wrong.. I take it back. It makes no difference!
I am sorry.
Looking Glass said:
If you use OS 2.20 the problem is gone. During pairing select ONLY the first time is asks for Handsfree/headset. Discard the second time. (I Don't know why exactly)
:?
Click to expand...
Click to collapse
I noticed NO difference on BT800, or my ANYCOM 880, or from my two Motorola ones.. I do not know if it makes a difference on other devices.
Looking Glass said:
And BT specs for protocol 1.2 is already out there....
:?
Click to expand...
Click to collapse
Could you explain more please?
On my xLive it only has one BT Handsfree/Headset prompt but on the xLive, it lets you select the pairing mode... Hands Free or Headset.
It ALSO has excellent caller ID display! When I may have had a Partial BT Tools installed, I only got caller ID. Now, I get the name too if it is in my contacts list!
I also found out how to use the xLive without all the problems!!!
It took me about 2 hours to do this..
BT headsets...
It looks like the other devices with caller ID on them, HBH-660 and the HBH-220 do not work great and I know for SURE the Jabra BT800 is crap.. (even in Headset Mode it takes up to 9 seconds to answer a call.. In Hands Free mode, it is only 2 seconds but the caller ID does not work)
So, the ONLY solution for those who want caller ID on a handy little device is, the xLive.
I recommend the xLive now. I found that the xLive will screw up if you press certain buttons or for other reasons explained below and if you do not press them or do the other things, it works fine.
I am not sure if People can get A2DP to work on the XDAII, I have seen most say they can't, SO, the next best thing is the xLive! It also supports caller ID and will list the Callers Name if it is in your contact list AND you can DIAL phone numbers with it, all while your XDAII is 30 feet away. You can dial numbers with it through pressing the BT button, selecting "Dial" and using the little joystick to select the numbers and then press the BT button again to dial!
xLive also supports MP3 streaming though a program the give you and a your typical BT device hooked up to your PC. I have one that only cost $39 and it works for about 150 feet. You can get past it's memory limit this way.
How to use the xLive with an XDAII with 2.20 translated ROM.
1. Pair it using “Hands Free” mode, selecting “Pairing Clean”, once, (you do not have to repair again)
2. When you FIRST turn the xLive ON or if you are unable to make call through it or get calls through it, press the Bottom Right Button for 2 seconds to turn it off. Then Turn it back on with the same button. Then Press the BT button on the front left, next to the screen, wait 4 seconds, press it again and wait 6 or 7 seconds until the little BT icon appears then press the Top Left button (A-B and Record, AKA cancel)
3. Never hang up a phone call using BT button! ONLY USE THE “END CALL” function of your phone or wait until the other person has hanged up. If you press it, redo step 2! (the BT button is the one on the left of the screen)
Problems that will cause you to have to turn it Off and then back ON again,,, IE. Repeat step 2.
You can ONLY reject ONE phone call.. After you do, go redo step 2
If you Miss a call, go redo step 2!
If you reboot the XDAII or the two get out of range of each other, you only need to press the BT button and then press the Cancel button after the BT icon appears again.
http://www.expansys-usa.com/product.asp?code=111023 128 $82.95
silver.
http://www.expansys-usa.com/product.asp?code=116333 256 $128.95 Black
http://www.expansys-usa.com/product.asp?code=111492 256 $128.95 White
http://www.expansys-usa.com/product.asp?code=111493 512 meg not out yet.
ccrrazzzy said:
Looking Glass said:
If you use OS 2.20 the problem is gone. During pairing select ONLY the first time is asks for Handsfree/headset. Discard the second time. (I Don't know why exactly)
:?
Click to expand...
Click to collapse
I noticed NO difference on BT800, or my ANYCOM 880, or from my two Motorola ones.. I do not know if it makes a difference on other devices.
Looking Glass said:
And BT specs for protocol 1.2 is already out there....
:?
Click to expand...
Click to collapse
Could you explain more please?
As for you first question: It does a difference to me. Some devices use different functions if they are paired ONLY as headsets or as HANDSFREE. The mess about "what you do in the two step pairing" is probably part of the problem. I've found that the first pairing is best for headsets (HBH 35, HBH 600) and the dual pairing is needed for carkits (at least for my BMW carkit).
Second question: BT specs 1.2 means that there are more profiles and functions that now can be implemented in more devices: SO MORE TROUBLES, and more chances for something to go wrong. There is a lot on information about BT specs out there, you can read about, and wonder what will happen with a device that implements them all.... the HTC/MS way!
And finally, some comments about the "erratic" behaviour of caller ID on your headsets: I've found some remarks noting that depending if your contact info for a certain number is stored in the phone memory OR IN THE SIM CARD, it might change how the info is passed onto your BT headset! So you can see the name, the number or even nothing at all for a few seconds.
:?:
Click to expand...
Click to collapse
Sorry, I have been away from this forum for a while and have decided to come back and try and face my BT issues again.
I am running
ROM 2.06.00WWE
Radio 1.18.00
ExtROM Sin.Merged.v1.0
on an XDA11 with a Blue Ant hands free.
Before upgrading the BT was crap.....long delays in answering, no redialling facility worked and the sound quality was awful.
Since upgrade I really couldnt tell you about the other issues but sound quality appears to be worse. My incoming is fine but out going, the hands free mike is not working and the phone is still receiving on its built in mike. I have tried pairing as "Handsfree" and "headset" with no difference.
Any ideas?
Cheers
Mark
OK,
sat in the car had a beer and tried again. Selecting "handsfree" when prompted and no and no to headset enables the in car mike and allows outgoing calling. But does not allow incoming calls pickup.
Every other config of headset and handsfree combo selections removes the in car mike from working.
Go Figure?
Cheers
Mark
teknophob said:
OK,
sat in the car had a beer and tried again. Selecting "handsfree" when prompted and no and no to headset enables the in car mike and allows outgoing calling. But does not allow incoming calls pickup.
Every other config of headset and handsfree combo selections removes the in car mike from working.
Go Figure?
Cheers
Mark
Click to expand...
Click to collapse
Hi! As said before, you'll be better off with 2.20.
2.0x versions work mostly OK as far as functions, but then you have the dual mic/speaker problems....
Read the forum, there is NO perfect BT solution, in fact, there is not a official version claiming to support HandsFree profile...
Yep,
I hear you, I know the o2 is not handsfree compliant only headset.
The local gurus at Strahfields are trying to sell me the latest Nokia bluetooth hands free.
I quote,
"Its compatible with everything and my mate has got an o2 and it works fantatsically" unquote.
But they where not prepared to give me a demo.
Cheers
Sorry if I am being stupid, I currently use the Diamond 1.2 ROM and have a BT800, so I know all of the problems in trying to get the mic working etc.
Is there an English ROM with 2.20 that's easy to install?
There are so many references and links to various CAB files on here, but as I use my XDA2 for business, as well as pleasure, I don't have time to experiment I would like to find an installer, do that, and then add my own apps, and be up and running within an hour.
I bought the BT800 for the call quality, not the extra features, but now I have a headset that can do so much more, I would like to make use of all the features, but not at the expense of the PDA's stability, although saying that, Diamond 1.2 gives me the hang on reset issues, and random slow down issues too, so it may be better to change to something else anyway.
ccrrazzzy said:
I think I found a fix for the BT Hands Free not working the way it should.. I can even use call waiting now and it does not kill the mic when I switch back to the first call..
I set the phone settings to automatically pick up after one ring.. No, it will not automatically pick up after one ring but, now I am getting the name to display in the caller ID field of my xLive mp3-BT headset. and it is working consistently.. I HAVE NEVER gotten it to work consistently before.. NEVER. i will try it with my Jabra BT800 later too.
I think it makes a "deeper" or better connection by making the phone try and make the BT headset device automatically answer???
I am using 2.20 OS and it is the only one that I have found to work, (not fully but it does work BETTER), please try this with other Hands Free devices like car kits and HBH660 etc.. Also try this with 2.02 and 2.06
Click to expand...
Click to collapse
Hi,
I see you are using Xlive Bluetooth MP3 Player... so I want to know if I can use it with the Motorola HT820 ( http://www.mtekk.com.au/tabid/54/articleType/ArticleView/articleId/641.aspx ) and my xda II whit ROM 2.20 ....
Thanks

SE HBH-DS970 bluetooth headset

Anybody using the SE HBH-DS970 bluetooth headset with the Hermes and if so what is your experience?
Thanks
i use that one waht is your wonder?
I wanted to know if everything works fine and if you are happy with the experience (sound quality, responsiveness, etc.).
I tried it briefly at a store and everything seemed to work except when I received a call I could not hear the person talking. It may just be that I needed to do a soft reset but if I know it is working with the Tytn for someone else I will buy it.
Thanks!
No Good.
1. Sound Quality is very poor even with the A2DP hack. Far from my M600i. It's much better with the original usb headset. so I guess maybe Sony Ericsson has a different A2DP encoding implement or have some tricks on the media player?
2. Only the Call Key and Volume keys work. I don't know if there any PPC music player support DS970's music keys.
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. Only one problem I couldn't solve so far.. it is skipping every 40-50 sec. I am using now original rom from o2 germany. I am going to try imate rom or at least new radio rom. Let see, if it helps
2. All keys are working with native Windows Media Player.
I am using it with PocketPlayer. Works fine with every button. Sound quality is super after the hack. But I got the same problem as SWayf, music got skippy every while...
Multipoint Function with PC Headset profile?
Has anyone tried to pair this headset with a Hermes and simultaneously with a PC that supports the bluetooth headset profile so that it is possible to switch from VoIP (eg Skype) and the mobile phone easily?
Following on my previous post, I now have the headset in hand and although I can connect to my PC and phone simultaneously using the multipoint functionality, the PC connection is only for music playback, ie the microphone is disabled, so I cannot use the headset for VoIP calls. The Bluetooth Service Class is listed as "Audio Sink" rather than "Headset". I don't suppose anyone knows of a way to activate the microphone in this mode?
SWayf said:
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. QUOTE]
wud u please tell that what exactly u did, caz i m new at ppc's
thx
Click to expand...
Click to collapse
Really regret buying it.. Tried the A2DP tweak with the Hermes Tweaker but no luck. Better soundquality but sound keeps skipping every 30-40 seconds, useless for listening to music... I would got nuts having to listen to those skips that often..
Anyone found any tweak to get rid of the skipping problem?
Buttons works fine for controlling Tytn audio quality is ok and I love the looks of it, if I just could get rid of that skipping..
How sick is this! I found this tip on another forum.
Try installing this taskmanager, start wmp and then the task manager, close any apps you don't need to use and then set it to monitor system load.
http://www.iaccarino.de/silvio/ppcstuff.htm
As long as it's running NO SKIPPING so far, have been listening to three full songs so far....
Which of you gurus can figure this one out??? So it must be possible to fix the problem by emulating what this software does??
Any updates on this?
Considering buying one, but wont if there's no fix to the skipping
I've just bought one of these headsets. God, the sound is atrocious. Can someone please fill me in on the hack that was mentioned earlier? I've got the Fit4cat ap on my Hermes but the sound is still rubbish even after adjusting the the "improve BT A2DP sound quality" setting to "excellent". Is this the hack that was referred to earlier or is there another I am not aware of??? Please, can anyone help with this. I feel I have wasted a serious amount of cash on this
http://forum.xda-developers.com/showthread.php?t=284974
This is what you need to read/download.
Hi!
Got hermes and ds970 to work (almost) perfectly
I did this, step by step:
-Hard reset hermes (got o2 xda trion with latest htc wwe rom 1.35 radio 1.18)
-installed ms voice command 1.6
-installed beta version from jetware and their hermes fix
(all files can be found here http://www.jetwaremobile.com/beta.htm don't forget to soft-reset after installation of the "code signing certificate")
-installed a2dpfix
-get HTweakC and set a2dp quality to "medium" do not set it any higher, as the sound quality will be better on medium than on e.g. "excellent"
Configure Jetware Software to show CallerID etc...
Working:
-CallerID shows name!! AND number (alternating) everytime
-A2dp quality is quite good (could be better, but definately very usable)
-Voice command quite usable (still rarely switches back to device speaker)
-very stable bluetooth connection
-remote control of windows media player
not working:
-display doesnt show song title, but i guess we'll never get that on a wm5 device...hope i'm wrong.
Wanna thank everyone on the hermes gps thread...keep up the good work!!
so you can stream media player to the headset too as well as controlling VC1.6? Does VC1.6 fire up when pressing headset button?
Hi!
When I'm listening to music, and press the headset button:
-Mediaplayer goes on pause
-after 2-3 seconds I hear the voice command ding-sound and can say my command. Then hear the lady from microsoft ;-) respond (on long responses the sound sometimes switches back to the device speaker such as when the lady asks me what number-entry to dial and there are 5 numbers in the contact.)
-then switches back to playing mediaplayer for about 2 seconds until the phone initiates the call and then pauses mediaplayer again and switches the headset to the call.
-after the call sound again goes to a2dp and the song resumes playing.
Hope it stays that way...I'll be very very carefull what programs I install.
programs I got installed at this point are:
spb diary
prssreader
navigon mobile navigator 5
google maps (the new not java one)
wakeitup
pocketstreets 2005
tcpmp
clearvue pdf
spb gprs monitor
totalcommander
+the ones mentioned in my post above
(all programs, if not mentioned otherwise, are the latest versions)
oh BTW I tried setting a2dp quality to "low". I can't hear the difference to "medium" and think it will be less stress on the cpu.
what does not work, is also that the announciation of new messages from voice command 1.6 when set to "announce only over bluetooth" still come out of the device speaker.
Hope it works for you, too.
excellent. i'll try these settings. thanks for detailed message
got myself a ds970 and followed your instructions Brevi. music streams brilliantly but i can't transfer calls to the headset,make calls from the headset nor can i get VC1.6 to fire up when i press the headset button. if i start VC1.6 on phone, then i can say command on the headset and that works.
Do you install the JetDial app?
What settings did you configure in the Jetware settings?
any ideas?
i have the "new" btagext.dll which fixed VC1.5 and mono headset - do you think that's the issue?
Update: Aha, i uninstalled the JetDial app (stupid or what) and now everything works except starting VC1.6 using the headset button. i suspect, JetDial has left some reg keys that need removing. No idea what though
Hi! Yeah, you probably need to do a hard-reset to get a clean install of all the little "helpers". I'm confident it will work then.
Tell me if you get the "play reminders only over bluetooth handsfree" option in vc1.6 to work maybe with the btagext.dll. I'm away from my main computer for a couple of days and unfortunately can't mess with my phone till I get back.

RADIO

It seems common sense that the RADIO ROM is not the best ...
The RADIO´s which can be used are also limited ....
Which RADIO works best for you ?
How can "we" improve it ?
thanks
myrin
You mean the FM radio?
My prob with it is that the basic volume level is lower than the media player and even on max it is too low in a noisy environment (e.g. tram etc.).
I would like to know if this can be fixed somehow...
the RADIO ROM
Im using the Diamond Radio by Dutty. Radio v1.00.25.08
Seems to be the best ATM (atleast for me).
Search XDA-Devs for how to flash these and to download them.
i'm not glad with this default radio rom. bluetooth and gsm were not as well as i expected.
and also gps; i have tested i-mate ultimate 9502 gps, it was great.i'm not sure that gps functionality is including radio or not but i think it could be better.
I'm using the Diamond 1.00.25.05 which worked great for me on my Diamond and seems to be as good on my TP on Tmobile in London.
I had a .25 radio, which I flashed to the .31 one. There always seems to be problems with the GPS and BT. BT drives me really crazy to be honest, in the morning, when I hop into my car, the phone connects to my Parrot CK-3100 BT HF and syncs. When I make a call, sometimes it's ok, other times the phone disconnects after I release the call. I have to reconnect manually like every 10-15 minutes. And of course, when I want to make a call in the office, near my BT enabled laptop, the phone automatically connects to the laptop in HF mode which I did not even check in the services list of both the phone and laptop! Anybody else with the same experience?
Those are radios cooked by Bepe. They are not stable on the Rapael. Try other radios for example ones made by Dutty.

HELP: Michy’s R4.1 and skipping voice problems during conversation with Jabra BT 8010

Guys,
Once again I am turning to you with a problem which is driving me nuts… After several attempts (ROMs and registry settings), I simply cannot get it working. I am using Jabra BT8010 handset and I get complaints from some, but not all, people I talk to over the phone that my voice is skipping. Some fragment of the words (a letter or two) is simply missing - not heard – by my talking partner. This has also happend to me when using official or irus ROM!!
First let me say that after I installed Michy’s R4.1 ROM the things with BT has changed a bit – in positive direction. I noticed that because the Jabra connects to the phone faster then before, when phone is rebooting the BT connection sign is gone immediately, etc. This was not the case with the original ROM nor iruses ROM 0mb PP. At this point I’d would like to thank Michy for that, since the file transfer to and from Athena now works almost flawlessly as well.
Please note that I get no skipping sound in downlink direction: nor during phone call nor during streaming of music or videos - the sound quality is just great!
But the voice skipping is just frustrating. What to do? I have tried twitching several settings in registry: BitPool, MaxBitPool, Sample rate and Use Joint Stereo. But, no combination resulted in no-skipping sound. Is it Jabra? Could you suggest what to do next in order to get this working!!!
PLEASE HELP!
Uros
I don't use bluetooth headset myself, but would suggest that you try out the latest R5.1. I find R5.1 to be much better than R4.1 in the data connection, GPS, and WIFI communication, and have no problem in bluetooth file transfer. However, I recommend that you use the latest radio version 1.58.
I find my VOIP experiencing voice quality improvement as compared to R4.1 with radio 1.57.
After trying it, I'd be eager to hear if that helps.
Cheers.
eaglesteve,
Meanwhile I got my hands on Motorola HS810. Guess what: no voice skipping or distortion what so ever!! So is there something wrong with my Jabra or simply the BT or its settings are not matching to Jabra? Someone suggested to delete the Bitpool and MaxBitPool from the registry to get protocol handshake, i.e. the device negotiate for optional parameters…?
I will try R5.1 and report back.
One question though in regards to BT and file transfer since you mentioned it: the feature to make my device visible to other keeps disabling automatically. Once I set it (check) and file transfer (via moBLUe) works, but sometimes - I swear I didn't touch the settings - the file transfer (via moBLUe) does not work. When I check the feature the feature is disabled!?!?! WTF...? I am doing something wrong or...
BR
Uros
I had the same problem with my 8010 until I went to radio 1.57 (and then 1.58, although 58 isnt as good as 57 for sound quality and the 8010). Im not using Michy but that shouldnt matter.
eaglesteve said:
I don't use bluetooth headset myself, but would suggest that you try out the latest R5.1. I find R5.1 to be much better than R4.1 in the data connection, GPS, and WIFI communication, and have no problem in bluetooth file transfer. However, I recommend that you use the latest radio version 1.58.
I find my VOIP experiencing voice quality improvement as compared to R4.1 with radio 1.57.
After trying it, I'd be eager to hear if that helps.
Cheers.
Click to expand...
Click to collapse
Eaglesteve, what solution do you have for VOiP?
weird. i am on michy 4.1 spl 1.2 and radio 1.57, and i think i have the same problem, but only with skype voice calls.
i am using plantronics pulsar 260.
it is so bad that the word "hello" breaks into 3 or 4 fragments.
beginner said:
Eaglesteve, what solution do you have for VOiP?
Click to expand...
Click to collapse
I use AGEPhone.
http://forum.xda-developers.com/showthread.php?t=402463
Using Jabra BT8040 with Athena and another cell phone,
poor performance, ocassional voice breaking and soft.
Just upgrade its firmware and monitoring.
With another simple bluetooth by Motorola H375,
no such issue, voice was clear and loud both ways.
I have tried several settings with radio 1.58 as well as 1.57 and in all cases the voice is distorted with Jabra BT8010 ;(
On the other side, using the Motorola HS810 I expirienced no problems at all at any setting i gave. Eventhough I like Jabra VERY much due to its features I will replace it...
I'm on ROM AP4, you might try that, too.
cerk2006 said:
I have tried several settings with radio 1.58 as well as 1.57 and in all cases the voice is distorted with Jabra BT8010 ;(
On the other side, using the Motorola HS810 I expirienced no problems at all at any setting i gave. Eventhough I like Jabra VERY much due to its features I will replace it...
Click to expand...
Click to collapse
I have same expertise as you (jabra with some troubles). But if I connect this headset to a blackberry no problems and it is perfect
I have 7500/4.1(3.5) and a BT8010. I have solid connection with my blue tooth.
From your descriptions, it sounds like you have a defective 8010.
nrm said:
From your descriptions, it sounds like you have a defective 8010.
Click to expand...
Click to collapse
This is my second Jabra 8010. I have experienced the same problem with both!
Yesterday, I have flashed Athena to Michy's R5.1. No change.. the voice skipping is still present ;(
I decided and will replace Jabra. I have two candidates: Nokia BH-902 or Motorola SH-7x0. As said Motorola before Motorola SH810 gives very good – no distortion – voice! Will see how the Nokia behaves. Any pros and cons for each???
Thanks guys for your help.
Uros
Yes, same effect here, I'm using the Jabra 8010 also and have sometimes the same problem. From my point of view it is a jabra problem, not a ameo / athena nor a ROM problem.
After updating on radio 1.58 I have some problems with the connection to my Pioneer carraudio Sytem (used as a handsfree set) also. So I've decided to go back to 1.50, after that I will update on michyprima and check it....
Kind regards
Andreas
Hi all, I'm new to this forum, but I have learned a great deal from you guys & gals! Hail to all!
I have the same problem with my U1000 & bt8010 under Radio 1.57 & 1.5.
For me, the problem seems less noticeable if I:
1. stand / sit STILL (sigh...)
2. have more ram to the system (no big TODAY plug-ins like spbDiary)
In theory the 8010 is perfect for big dogs like the athena. (gosh i love the phonebook and the music ... even mono makes me happy ...)
Just a simple suggestion but based on what I've read on this last page with you guys changing the radio's and ROM's has anyone decided to update the Jabra BT 8010 Firmware. I've never experienced the problems you guys have it might be a last hope but why not go for it. Firmware found here:
http://uswww03.gnnetcom.com/Myjabra...=/myjabra/bt8010_control_center_na.html#step1
The software is at the bottom of the page, however you will also need to install the program to you computer to actually install the firmware. Follow the directions provied on the link, and feedbacks please.
tootallk2000 said:
Just a simple suggestion but based on what I've read on this last page with you guys changing the radio's and ROM's has anyone decided to update the Jabra BT 8010 Firmware. I've never experienced the problems you guys have it might be a last hope but why not go for it. Firmware found here:
http://uswww03.gnnetcom.com/Myjabra...=/myjabra/bt8010_control_center_na.html#step1
The software is at the bottom of the page, however you will also need to install the program to you computer to actually install the firmware. Follow the directions provied on the link, and feedbacks please.
Click to expand...
Click to collapse
tootallk2000,
I have been using the FW 1-40-0 for more then a year now and compared to older FWs it does not make a difference
Uros
In my post #12 I claimed I had "solid connection with my blue tooth". I spoke too soon. The first time I played music on Pocket Music I got lots of skipping.
This was also a problem discussed at length last year. I did a reg search on "priority256" and found that the decimal number was 131.
I changed it to 256 and NOW I have "solid connection with my blue tooth". I have not had a single skip in 15 minutes of playing music.
OOPS - I just got a 1/2 second skip.
on my post at #6, i also spoke too soon. when i tested skype at our office (faster dsl connection), the voice is smooth, no skipping. i guess it was just an internet connection problem.

Categories

Resources