Related
I know there is a wiki and that's why I'm asking... I have this now:
herm100
ipl-1.01
herm100 spl-1.06+
That's on the bootloader screen, and I just did a hard reset. I've been using the default sh*t since it came out and have had so many problems. I want to upgrade to WM6 but I want to make sure it is as safe as possible. What should I do? Like what order? I saw some downgrade and stuff and I don't know.
I tried to upgrade to Hard-SPL-V7 like 100x with the Advanced Connection in PPC on & off. No matter what, I get the Error 260 ( my PPC says the bootloader is trying to run, I say Yes, allow it to run, and then it just disconnects from PC. happens even when I am unresponsive and don't click Yes )
I want to end up with a WM6 that won't eat battery, and will just load fast.
After you give me that advice... I had like 40+ applications before and I did so much to my 8525 to make it awesome and now it's all gone. So can you give me hints to this:
-Application to x out of programs
-How to make it stop shutting off every certain amount of minutes
-How to make it not freeze as often
-Any other hints.
Thanks in advance.
hi, i was haveing error 260 for the last few days
i changed my usb lead and the problem went away
i spoke to someone (cmonex) who said its a problem between pc and phone, try a different pc, but i found changing the cable worked fine
you could also try the thread where they update from the phone memory card, altho it never worked for me (tbh i havent tried it since ive changed my cable)
hope this helps, it might not but i did have same error code
Still the same error...
I'm using the default ROM now and I want to try out WM6 and first try the Hard SPL so it'll be safer. Any other advice guys?
Anybody? I really want to upgrade I've used this same ROM with the same errors for so long now =/
I have found im also getting this problem. earlier I updated to the latest radio software and that went ok and works fine. Now I cant update to anything.
First thing, I take it your Activesync is running fine... what version are you using. 4.5?
To it put as simply as possible. Get HardSPL on your phone some how.
Then stick on which ever ROM you want... Schaps 4.01 seems to be quite popular right now though he is working on a new one with some nice features so you may or may not want to wait.
I strongly advise people to use the MicroSD way of flashing as it's much safer. Many people don't have stable usb connections (and don't know it) which is why they end up bricking their phone. Even if you have HardSPL it's less hassle not to brick it in the first place.
Lastly, you have to search and read (and occasional ask), which is how most people here get their phone working the way they want.
Hey,
Like Wam7 says get Hard SPL on there...Here's a few ideas that worked for me. Please forgive any errors or omissions. Others may have better advice for you as well..
With an error 260, I believe you must first deal with your USB connection issues, ie: make sure you can remain connected properly to effect an upgrade on the bootloader level.
WIN XP: If your running AS 4.5 and getting a 260 error, try connecting to AS 1st, let it sync do all of its work...When the phone is chilled out, then start your wrapper for HARD SPL..There are some more ideas for AS here:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
VISTA: the native WMDC drivers for the HTC hermes aren't compatible when our phones go into bootloader..(That's why you hear 2 distinct "Disconnect/Reconnect" sounds when you go into bootloader)..Use Mr. Vanx's guide to force the connection. It can be found here: MR. VANX'S VISTA GUIDE
After you can connect and get Hard SPL loaded, 90% of your worries may be gone..You can still brick your phone but there's some safety built in.
Another good piece of advice I recieved was to flash your carrier's standard ROM and try it 1st..you may like it...If you don't then see if anyone has cooked a carrier specific ROM you may use...There are a couple of really good At&t specific ROMs: VP3G has a great one..Just try some out to see what you like. Thats the only way to get the ROM you are happy with.
Once you have a rom flashed, somebody told me to do a hard reset before configuring and customizing your rom...Maybe it seems to burn it in..Don't know..
I shut EVERYTHING down when I flash, programs, antivirus, software firewall, anything running in taskbar, SearchIndexer, I even disable my internet connection..I even throw my cat out of the room..15 minutes, its over and evrything can go back to normal..
Good luck..
Thanks for all your replies.. but this one, jesus christ. Dude, literally after I read this I followed the steps, and in 10 minutes I have Hard SPL AND the Scaps ROM there. Your advice is f*cking Godly, everybody who has my error... FOLLOW IT! His advice literally 101% solved my problems! Thanks so much bro!
shihayadreamer said:
Hey,
Like Wam7 says get Hard SPL on there...Here's a few ideas that worked for me. Please forgive any errors or omissions. Others may have better advice for you as well..
With an error 260, I believe you must first deal with your USB connection issues, ie: make sure you can remain connected properly to effect an upgrade on the bootloader level.
WIN XP: If your running AS 4.5 and getting a 260 error, try connecting to AS 1st, let it sync do all of its work...When the phone is chilled out, then start your wrapper for HARD SPL..There are some more ideas for AS here:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
VISTA: the native WMDC drivers for the HTC hermes aren't compatible when our phones go into bootloader..(That's why you hear 2 distinct "Disconnect/Reconnect" sounds when you go into bootloader)..Use Mr. Vanx's guide to force the connection. It can be found here: MR. VANX'S VISTA GUIDE
After you can connect and get Hard SPL loaded, 90% of your worries may be gone..You can still brick your phone but there's some safety built in.
Another good piece of advice I recieved was to flash your carrier's standard ROM and try it 1st..you may like it...If you don't then see if anyone has cooked a carrier specific ROM you may use...There are a couple of really good At&t specific ROMs: VP3G has a great one..Just try some out to see what you like. Thats the only way to get the ROM you are happy with.
Once you have a rom flashed, somebody told me to do a hard reset before configuring and customizing your rom...Maybe it seems to burn it in..Don't know..
I shut EVERYTHING down when I flash, programs, antivirus, software firewall, anything running in taskbar, SearchIndexer, I even disable my internet connection..I even throw my cat out of the room..15 minutes, its over and evrything can go back to normal..
Good luck..
Click to expand...
Click to collapse
Well it turns out all I needed to do was do a Phone reset and all was fine again. ended up ditching the new rom as It messed up my adress book on the PC and a few other things wernt too hot. Gonna try another one later.
Error [302] - updating to WM6 on a 8525
I'm trying to upgrade to WM6 and gets to 64% of the update and I get this Error [302].
Herm100
IPL-1.04
SPL-2.10.olipro
R 1.54.07.00
G 32.86u7020.23H
D 3.62
Anyone with this same problem????
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
Hey all,
Well i know i m a newbie here, but i did all my searching and tried everything, but nothing will work. I flashed WM6 (http://forum.xda-developers.com/showthread.php?t=367019) and all was working fine. I was simply adjusting a few things on the phone when it required me to restart. I restarted the phone and now it will go to the slash screen, and the windows circle thing will start spinning to load, then it basically dies, the screen just fades to white.
I have since then tried two methods of getting it fix, but since my computer wont recognize the phone ( i have vista and media center), I cant run RUU, i get code 266.
Is there anyone that has a solution to this? I can get my phone into bootloader mode.
Please help me!
-Matt
By the way, the phone is CID-Locked....is their a way to CID-unlock it while in Bootloader mode? it is a G4
I got it fixed!
Now if it can just get deleted....
So I was trying to fix my start menu problem, by installing a new rom, and now im stuck at this screen that is red green blue and white stripes, and says
"TITA100 MFG
SPL-2.4.0 Olipro
CPLD-9"
doing a hard reset did nothing! Brought me right back to the striped screen.
Explain it like your talking to someone who doesn't know much about phones, like me!
Thankyouu
Oh your killing me;-)
Well what you have is good so far because it is what you want to see, but more info is needed like what ROM are you trying to load and stuff like that. If you reeeeeeeeeeeeeeally want to short cut the process then read the threads that talk about this and you just do the next steps:
1) Flash the unlocker (thats what you have done and where you are now)
2) Flash the ROM (Thats what you need to do now)
3) Flash the Radio (if you don't do this then you will really get scared)
4) Reload all your stuff and enjoy.
thanks for the reply, how do I begin to flash the rom? I've downloaded so many and run them with winrar and nothing happens it just stays at that screen.
i'm also very pissed off because I hard reset hoping to get out of this stupid screen and now im still there, with out any data. I'm stupid and didnt backup either so now i'm really screwed...
you need to run the rom loader - winrar is not a rom loader.
Download a ROM and the ROM Update Utility. Place the ROM's .nbh file into the RUU folder and run the RUU.
Read around, it's not difficult.
When I try to run the RUU, it says error 260 connection, even though my computer detects it, and it says USB on the bottom of the phone... anyone know whY?
Make sure your USB connection in ActiveSync is turned off. You may need to reboot.
alright I'll check when I get home... but when I did have it connected, activesync didn't detect it, so I dont know if thats what you mean or not.
Through a comical accident, my FUZE was trhown agaisnt a wall and landed on a computer keyboard, which then Bluescreened. Why ..I don't know. But the phone came apart. When I put it back together, it started with a error message....
It boots into the Tri colored screen and says ROM loading error, please try again.
I originally had OlipPro spl on the device. After reading for about an hour, I tried to reinstall the hard spl. that didn't work. I found a stock spl from the forum here and tried raphimg.nbh. That boots but goes into a Loading... screen with no other action.
I can't imagine what caused this...I was in the dentist office when the accident occured. I would expect this to occur if I was flashing or something.....
Any one have any thoughts...or is this bricked
alodar1 said:
Through a comical accident, my FUZE was trhown agaisnt a wall and landed on a computer keyboard, which then Bluescreened. Why ..I don't know. But the phone came apart. When I put it back together, it started with a error message....
It boots into the Tri colored screen and says ROM loading error, please try again.
I originally had OlipPro spl on the device. After reading for about an hour, I tried to reinstall the hard spl. that didn't work. I found a stock spl from the forum here and tried raphimg.nbh. That boots but goes into a Loading... screen with no other action.
I can't imagine what caused this...I was in the dentist office when the accident occured. I would expect this to occur if I was flashing or something.....
Any one have any thoughts...or is this bricked
Click to expand...
Click to collapse
A brick it is not. After reading the notes in the Disaster Recovery thread, I found a stock ROM in the WIKI and tried to flash it. Because I could get a USB connection, the ROM loaded. And, after a couple of hard resets, I now have my FUZE functional again. Thanks for the WIKI and all the experts here that contribute.
alodar1 said:
I can't imagine what caused this...
Click to expand...
Click to collapse
Something to do with the wall?
I expected this to be something like "What does error 206 meanzorz111!!1?"
Quite refreshed to see that that was not the case. I am glad you fixed your error. I have had issues like that with my kaiser before, and since I got windows 7, the comp recognizes the device even from bootloader. Congrats on solving your issue, best of luck in the future, and dentists are bad
I've never had a cavity, ever. Brush once a day and haven't seen a dentist in 3 or so years $$