So my Titan's hardware keys on the outside gave up (everything but the ok button, and sometimes the wheel) as well as the left half of my touchscreen (go figure). The Qwerty keyboard is ok and everything else inside so I can still get around until the warranty one gets back. I was having the problem of getting things reset and ran into the problem where I needed to bypass the alignment screen but welcome.not didn't work, and deleting the welcome file in Windows/StartUp didn't work either.
So I found this that worked great and thought everyone should have this in their Titan folder for if/when they needed it. It allowed me to totally bypass the alignment screen after a hard reset, and it gives you the option to run an alignment from your PC as well. Good tool, saved me.
http://www.codefactory.es/descargas/family_1/product_3/MSP_RemoteAlignment.zip
good tool to have. thanks
Related
Can anyone assist with a couple of questions I have:
1. Since installing all the various bits of software on my IIi the screen rotation icon has disappeared from the bottom right of the today screen. Is there a way to get it back?
2. Because of the above, I re programme the camera, button 3 to rotate the screen, however it seems to default back to Camera after a soft reset. Is this a know problem?
Cheers
a18041967 said:
Can anyone assist with a couple of questions I have:
1. Since installing all the various bits of software on my IIi the screen rotation icon has disappeared from the bottom right of the today screen. Is there a way to get it back?
2. Because of the above, I re programme the camera, button 3 to rotate the screen, however it seems to default back to Camera after a soft reset. Is this a know problem?
Cheers
Click to expand...
Click to collapse
We have been discussing this over on TekGuru. It is a problem others are experiencing as well and so far no one has figured out a way to get it back or what causes it to disapear. Presumably you still have the screen rotation icon on your O2 Active Screen.
If you use or decide to use SPB Pocket Plus, you can use it to put screen rotation icons on your Today Screen.
The other thing to do is to assign it to a hardware button as yu have done. I assigned it to the calendar button when holding it down (I am using Vito's ButtonMapper which allows each hardware button to do two different functions).
It does not default back to the original setting after a soft reset but it may be that the camera button works in a different way.
Thanks for the update, my only thought on this is that it seemed to disappear after I added the additional software from the o2 CDROM.
Hopefully this will be fixed in the next ROM update, which hopefully will include Blackberry support
It says only ipl 2.25.0001 and spl 2.25.0001
I try a hard reset, but when it asks me to confirm by pressing SEND, I press SEND and nothing happens.. press any key and nothing happens, just sits there saying press SEND to confirm...
I tried flashing Cingular/AT&T's rom on to it, it was successful on the screen, but after rebooting, just went back into the 3 color screen...
Does anyone have any suggestions?
Additional info
I just wanted to add, I have searched threads here on xda-dev and other sites, and have found similar issues - normally the other issues have been resolved in one way or another involving a hard reset, which my phone will not complete. When it asks me to press send, the phone freezes at that point and does not accept any key entries (except reset). I would really appreciate any input. I also have a theory-that I may attempt this evening-If you hold the camera button down and reset, it brings up the boot loader screen (if my information is correct)... could my problem be caused by a faulty camera button? Maybe internally the button is remaining closed, which could prevent it from doing anything on a reset outside of the boot screen? Any engineers around that may know this? I am going to attempt (hopefully with low heat) to remove the button this evening... possibly even repair or replace it if the phone works with the button removed...(these thoughts are based on my phone being dropped in the sand at the beach...maybe a grain of sand worked it's way into the camera's button housing and is holding the contact closed)
problem's almost fixed
well thanks for no advice... i desoldered and removed the camera button (button 3). powered it on and the phone works. I reprogrammed the camera to button 5. (i also loaded a new WM6 rom and some other stuff) The last time I opened up the phone, I broke the itsy bitsy super micro tiny lock on the keyboard ribbon cable socket... so now my slide out keyboard doesn't work. I installed a full screen keyboard and set it to the messaging button (button 1) - the messaging button still brings up messaging with just a touch, but a long hold brings up a full screen touch keyboard that works fantastically!!! I am going to dismantle the very tiny micro switch and repair it, then resolder it back on the mainboard to make my camera work like it should again...and find a way to get the keyboard ribbon cable to lock into the socket...then my phone will be as good as new!
umm... thanks???
well congratulations on getting it working again.
tiny switch
I have taken the tiny little switch apart without breaking anything... one tiny grain of sand stuck under the button pressing on the switch plate... now i have to find a way to put the little switch back together... then attempt to solder it back onto the board without over heating nearby components. I have been playing around with Byka's cube... took a bit of tweaking to get it to work well.... not sure if I want to keep it or not... I have been trying to find htc cube, but no luck outside of a rom... which I may consider...but I just spent the past week reinstalling all of the software I use... Would like to just design my own windows for my phone if I had the time... Been working on an ion motor for an electric car...
I would like to thank everyone here at xda-dev. for all the information. Could not have learned so much, so quickly, if it weren't for this site.
oh... and I am using an 8125 (G4) with Faria Crossbow
Have the same problem...
Hi!
I have the same problem (but I don't have much tech know how).
It all started when phone got wet (inc. in battery compartment).
My phone would not soft reset beyond the Bootloader, unless I leave the battery out for a few hours. Then once it loads up, after a short amount of usage 2 things happen: 1) every time I would turn it on (or get a call) it starts in Camera (you didn't report it but you must have had the same experience). 2) the buttons don't work properly.
It finally dawned on me the camera button might be stuck, I set the button to "none", and no more more automatic camera. I still need to free the button altogether as still causing button freezeup and also allow soft resets.
I don't know much about soldering.
Any ideas?
Thanks
Hi, I both an HTC 8525 from eBay and it worked fine for first few days but yesterday a had first problem. At first his touch screen stopped reacting on touch, i tried rebooting, restoring on factory settings but every time he works for few minutes from the moment i start him and then again the same. My screen doesn't react on touch or if it reacts he opens a program and close it right away by it self, now he started doing that and when i start a program with buttons (not on touch screen). Please tell me is there a way to fix that by my self or should i return it? Please answer quick, thank you...
Factory default? Did it means hard reset? Had You done it? There are 2 ways :
1. Launch clear storage,
2. Handser OFF, press and hold right and left softkey, then do softreset with stylus..
If it still exist, i'm affraid of it's hardware problem, i hope not
Edit: Solved! See post #3 for information on how I solved this.
Long story short I got an AT&T Atrix from a friend with an Atrix Lapdock. I'm not 100% sure of the details but he had opened the Atrix (to replace the digitizer I think) and messed up the screen to where the backlight turns on but it's always black. The digitizer still works. He wanted me to factory restore the Atrix so I did so via the Lapdock by going into settings and selecting factory restore. After it booted up again it did not boot into Webtop mode. Well great, now I'm running the phone blind.
I think I was at the "Emergency calls only" screen since clicking the bottom of the screen above the soft buttons, then towards the top, played dialtones, so I got a SIM card (out of my Sprint Touch Pro 2, just for the sake of having any SIM card in it) and rebooted with the SIM in it. I'm at a different screen now, where I can make the motor buzz by tapping the soft buttons, and if I hold the Menu (4 squares icon, leftmost soft button) it pulls up a keyboard. I believe this is the Motoblur setup screen. As stupid as it may sound, I tried entering the "123/alt/abc/e/123/alt/abc/e/b/l/u/r/o/f/f" command by eyeballing the screen, but I don't think I deactivated it since it seemed like I could still interact with this screen the same way. I tried pressing (what I felt was) 123/alt/abc on the phone, and using the Lapdock to input the letters, but that didn't seem to do anything either.
ADB is definitely not enabled, I can launch fastboot (or any of the fastboot options, such as "Fastboot" "NVFlash" "BP HW Bypass..." etc, I wrote these down and just blindly input however many Down presses to activate it).
My next plan is to print off a screenshot of the Atrix keyboard to-scale with the screen and use that as a guide to input the "bluroff" command, hopefully doing that will get the phone into a state where it can activate Webtop.
Strangely, while I was in the presumed Emergency Calls mode without a SIM, either me spazzing out on the screen or some weird luck got the Entertainment Center to appear. However I could not navigate it at all using the Lapdock, not through arrow keys or using the mouse. I've never gotten that to happen again.
If this is a failure, my main purpose in getting these from him was to use the Lapdock as a small and luggable HDMI monitor (via adapters) so I'm not too disappointed, but it would be nice to have the Atrix working as much as it did prior to factory-restoring it.
DanAdamKOF said:
Long story short I got an AT&T Atrix from a friend with an Atrix Lapdock. I'm not 100% sure of the details but he had opened the Atrix (to replace the digitizer I think) and messed up the screen to where the backlight turns on but it's always black. The digitizer still works. He wanted me to factory restore the Atrix so I did so via the Lapdock by going into settings and selecting factory restore. After it booted up again it did not boot into Webtop mode. Well great, now I'm running the phone blind.
I think I was at the "Emergency calls only" screen since clicking the bottom of the screen above the soft buttons, then towards the top, played dialtones, so I got a SIM card (out of my Sprint Touch Pro 2, just for the sake of having any SIM card in it) and rebooted with the SIM in it. I'm at a different screen now, where I can make the motor buzz by tapping the soft buttons, and if I hold the Menu (4 squares icon, leftmost soft button) it pulls up a keyboard. I believe this is the Motoblur setup screen. As stupid as it may sound, I tried entering the "123/alt/abc/e/123/alt/abc/e/b/l/u/r/o/f/f" command by eyeballing the screen, but I don't think I deactivated it since it seemed like I could still interact with this screen the same way. I tried pressing (what I felt was) 123/alt/abc on the phone, and using the Lapdock to input the letters, but that didn't seem to do anything either.
ADB is definitely not enabled, I can launch fastboot (or any of the fastboot options, such as "Fastboot" "NVFlash" "BP HW Bypass..." etc, I wrote these down and just blindly input however many Down presses to activate it).
My next plan is to print off a screenshot of the Atrix keyboard to-scale with the screen and use that as a guide to input the "bluroff" command, hopefully doing that will get the phone into a state where it can activate Webtop.
Strangely, while I was in the presumed Emergency Calls mode without a SIM, either me spazzing out on the screen or some weird luck got the Entertainment Center to appear. However I could not navigate it at all using the Lapdock, not through arrow keys or using the mouse. I've never gotten that to happen again.
If this is a failure, my main purpose in getting these from him was to use the Lapdock as a small and luggable HDMI monitor (via adapters) so I'm not too disappointed, but it would be nice to have the Atrix working as much as it did prior to factory-restoring it.
Click to expand...
Click to collapse
wow....thats something.......you still int blur account setting (it uppen when you use a different sim card)....
try to wipe in fastboot
load new rom image that can skip motoblur account set up (like nottach)
when reboots click menu and then right corner down (skip set up) then it should be able to go in webtop mode..
hope it works
DanAdamKOF said:
My next plan is to print off a screenshot of the Atrix keyboard to-scale with the screen and use that as a guide to input the "bluroff" command, hopefully doing that will get the phone into a state where it can activate Webtop.
Click to expand...
Click to collapse
Posting to say this worked fine! I used Photoshop to print a screenshot 1.961" wide, carefully cut it out, taped it to the front, called up the keyboard (longpress the menu button, you'll feel it buzz long then very short), and carefully tapped out the Motoblur override. Took a few tries since you can't see what you're tapping (go slowly and use the tip of your finger) and the paper in the way makes it less sensitive. The phone doesn't buzz or anything when it does this, but if you put it on the Lapdock you'll see the swirly small red Motorola M icon signifying Webtop is loading, instead of the big red Motorola M icon that jumps around now and then. Also I had set the language to Spanish during my blind mashing, luckily I'm familiar enough with it to where I could change the language to English easily.
You can activate Motoblur through Webtop after you bypass the initial setup, I'm doing that right now.
htchd2fix I was considering loading up a ROM and seeing if that gave me more luck, but I wasn't sure how they handle Blur and all that, but anyway thanks for your step by step
I've attached the screenshot I used of the stock Atrix keyboard, and a Photoshop PSD I made that I used for printing, scaled to (more or less) the Atrix's width, cleaned up a bit, and with a black 1px border to assist in cutting. To whoever made the original screenshot (you're probably on XDA), thank you!
I'm leaving the screenshot taped to the Atrix for now so I can brag about its e-paper display
I've changed screen on my Flyer. Repair parts were from working tablet with dead battery controller. So I simply replace donor's mainboard with mine. Now I've got this kind of problem: middle part of screen (where upper row of letters is situated in portrait mode) handles my touch like multitouch of near area. For example, I press Backspace, and screen shows touch of Backspace and 0. Other parts of screen works fine. I've made calibration reset, hard reset but nothing gone. Please help me to find solution. Any help would be appreciated