My phone is stuck in boot screen,and can only boot in tricolor mode.Anybody know whether Mtty 1.42 or 1.16 can save the phone by formatting the rom and reflash a new rom? I tried as http://forum.xda-developers.com/showpost.php?p=934239&postcount=12 suggested with Mtty 1.42 and 1.16,but both failed and display
"Cmd>task 28
Invalid command : task 28
For a help screen, use command ? or h"
Can anybody tell me whether Mtty work for Oxygen? Thanks!
To fix your phone if its in the bootloader download this rom:
http://www.leaf.co.za/downloads/ROMS/Oxygen/Oxygen%20-%20P%20N%2099HCD064%20-%2024%20January%202007.exe
And flash it to your phone. It will then boot up in WM5.
This ROM has English and Russian.
To fix your phone if its in the bootloader download this rom:
http://www.leaf.co.za/downloads/ROMS/Oxygen/Oxygen%20-%20P%20N%2099HCD064%20-%2024%20January%202007.exe
And flash it to your phone. It will then boot up in WM5.
This ROM has English and Russian.
Related
Hi to all,
please help me,
When i wana install the last atom exec rom,two days ago,everythings is ok,but after hard reset,my device stayed at O2 logo and I couldn't hard reset my device and install rom too,because didn't sync with my laptop,have you any idea for this problem?
take off the battery and try again
I take off the battry many time,but this problem exist yet.
can you enter in bootloader mode (camera + reset) ?
yes,but i see a black screen that written on it:sd detected and
"starting download ...
sdDownload:couldn't find file;diskimg.nb0;.
sdDownload:couldn't find file;eboot.nb0,.
sdDownload:couldn't find file;dm.nb0,.
..."
at the end of screen:
"SD trensfer completed."
what your idea?what things i must to do?
Once entered in bootloader mode (ignore these SDCard messages), plug de USB cable and wait the device to be detected by windows
you'll be able to upgrade a new rom
i have the same problems, i upgrade the phone still stay on o2 logo
any other solution??
thanks
have you follow the upgrade procedure correctly?
just an opinion...
remove sd card...
then enter bootloader
then run upgrade DSUU.... follow on screen instruction
should be ok to upgrade your rom...
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
DUN USE MEMORY CARD TO FLASH AGAIN!!!
joncy said:
just an opinion...
remove sd card...
then enter bootloader
then run upgrade DSUU.... follow on screen instruction
should be ok to upgrade your rom...
Click to expand...
Click to collapse
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
mphoneclinic said:
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
Click to expand...
Click to collapse
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
chartreux said:
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
Click to expand...
Click to collapse
What can we do if the bootloader don't start ?
it is possible to modify eboot without bootloader ?
Thanks a lot.
bedav said:
What can we do if the bootloader don't start ?
it is possible to modify eboot without bootloader ?
Thanks a lot.
Click to expand...
Click to collapse
I don't think so, if your device can not be turn on via bootloader mode, then the bootloader corrupted on your device. the key is to secure the bootloader partition. without that one will be useless
please help me expert.
now o2 like dead phone. no windows in there. i try to boot and just have the screen black and some information:
mn2 bootloader
jun 13 2006 ...........
...................
debug module through uart
jump to dm.......
i try to conect to pc and upgade files in forum but can not conect.
i think, it should be install for the original wm5.0 before upgrade.
how can i get wm5.0 original and try to fix please
thank alots
http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=eboot
check post 12
homer285 said:
http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=eboot
check post 12
Click to expand...
Click to collapse
chartreux
Member Join Date: Aug 2007
Posts: 92
--------------------------------------------------------------------------------
Quote:
Originally Posted by mphoneclinic
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
Attached Files
thank you, i trying this way.
o2 atoem Exec unbale to boot in normal mode
my o2 atom exec unbale to boot in normal mode.
iT BOOT ONLY IF I PRESSED CAM+REST, THEN IT SHOWS MN2 BOOTLOADER,
1- FOR DEBUG MODE 2 FOR DM
IF I PRESSED 1 AND GOES DEBUG MODE , IT ASKED FOR RESTART.
IF I RESET THEN IT BOOT UP , BUT BATTERY GOES LOW IMMIDIATE,& SHUT DOWN DEVICE.
THEN I TRY THIS ANOTHER TIME BUT THIS TIME WHILE RESTART DEVICE I PLUG FOR CHARGEING CABLE. NOW DEVICE START OK ,BUT I REMOVED BATTERY AND TEST FOR SWITCH ON FOR ANOTHER TIME IT NOT STARTED. IT GOES BACK IN DEAD MODE. NOW I M USING IT THOUGH DEBUG MODE.
SO ANY ONE TELL ME WHAT TO DO FOR THIS OR UPGRADE OS .
THANKS
VISHAL
--------------------------------------------------------------------------------
Quote:
Originally Posted by mphoneclinic
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
Attached Files
thank you, i trying this way.[/QUOTE]
O2atom Exec unable to switch on in Regular
my o2 atom exec unbale to boot in normal mode.
iT BOOT ONLY IF I PRESSED CAM+REST, THEN IT SHOWS MN2 BOOTLOADER,
1- FOR DEBUG MODE 2 FOR DM
IF I PRESSED 1 AND GOES DEBUG MODE , IT ASKED FOR RESTART.
IF I RESET THEN IT BOOT UP , BUT BATTERY GOES LOW IMMIDIATE,& SHUT DOWN DEVICE.
THEN I TRY THIS ANOTHER TIME BUT THIS TIME WHILE RESTART DEVICE I PLUG FOR CHARGEING CABLE. NOW DEVICE START OK ,BUT I REMOVED BATTERY AND TEST FOR SWITCH ON FOR ANOTHER TIME IT NOT STARTED. IT GOES BACK IN DEAD MODE. NOW I M USING IT THOUGH DEBUG MODE.
SO ANY ONE TELL ME WHAT TO DO FOR THIS OR UPGRADE OS .
THANKS
VISHAL
Windows Mobile 6.1
- then device try to configure itself, showing something like disclaimer screen
of Michyprima (I press Continue)
- It asked to choose font: Tahoma or Segoe UI (Vista)?
i just leave it that way (Tahoma) & press Done
- a window appear with text: the changes will be visible only at next startup.
i clicked ok (as this is the only way to continue)
- It says customization will be in 3 secs. It resets by itself.
- the boot process is start all over again from the beginning as continuous looping
after long search of what caused it, i found that i have flashed wrong version of Michyprima's ROM SPL, other words: i used the rom for SPL v3.5 instead of SPL v1.2 version.
Now I do not know how to correct the unit.
Yes I searched and found the same problem but no solution simple enough for me to understand.
Can anyone please help with this, thank you.
i had the same problem before, looping after flashing. but i forgot how i fixed it. tootallk2000 was helping me through the procedure then. maybe he can remember how we fixed it.
Try this step:
1) boot into bootloader mode (push camera and volume all the way down and press reset)
2) Flash any SPL 1.2 rom or stock rom using bootloader mode (untick allow USB connection if activesync unable to detect)
3) done , make sure you only flash SPL 1.2 rom after the unit has been revived
ps : you may also try using SDcard (not SDHC) flashing if unable to connect using activesync. Just rename RUU_signed.nbh to atheimg.nbh and copy into sd card (sdcard must be formatted as fat32). Put sdcard into device and boot into bootloader mode. It will automatically start the process.
pps : if you see there's no ATHE100 on the bootloader screen, then your modelid is corrupted, need to fix it first before you can do any reflash ... plz read post #33 here : http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
same prob?
http://forum.xda-developers.com/showthread.php?t=470524&highlight=wifi
Hi I have a problem mtty made my touch pro before installing the hspl now to enter boost mode loader for a second I have the gray screen, blue letters says no image file and I can not load a rom that I can install hspl do? is hopeless?
hi i have a htc hero (well t mobile g2 touch) and i was follwing a guide for psfreedom which got me to install a custom recovery image and then install a .zip folder from my sdcard
m phone was fine after flashing the recovery image but after doing the .zip folder it now wont boot up
i can get into recovery but when trying to put a new rom on via sdcard it fails with this message
E:board does not support mtd utils.E:failure at line 72:
write_raw_image Package:boot.img
BOOT:
installation aborted.
i can get into bootloader but when i try to flash with fastboot it just says waiting for device and hangs there
iv tried doing this
http://forum.xda-developers.com/showpost.php?p=4467471&postcount=13
but that didnt work it just loaded up hloader and said no image found
i also tried
I found the solution!
Downloaded the RUU (ftp://xda:[email protected]_NoDriver.exe) and while in fastboot usb run the wizard!
And the hero is working again!
and that didnt work the htc application came up with the error of not detecting my phone through usb
anyone got any ideas?
Is your phone boots to the recovery mode or SPL? If it doesen't mean that it is a brick...
hubix said:
Is your phone boots to the recovery mode or SPL? If it doesen't mean that it is a brick...
Click to expand...
Click to collapse
it boots to recovery mode fine
and i dont know what spl is
Ok it's not a brick. To get into SPL press POWER+VolumeDown and give me a screenshot