Problem - JAMin, XDA Neo, S200 ROM Development

Hi , I have i-mate jamin and windows vista on my pc...i downloaded [WM6.1] Prophet ShadoW 2.0 TE when i open it ,it comes the screen [WM6.1] Prophet ShadoW 2.0 TE is not responding...
Why?

hi.
And one thing , i just entered the [WM6.1] Prophet ShadoW 2.0 TE.exe but now when i click update it comes not responding then my jamin comes the colours green,red and blue...why?

Hacklife said:
Hi , I have i-mate jamin and windows vista on my pc...i downloaded [WM6.1] Prophet ShadoW 2.0 TE when i open it ,it comes the screen [WM6.1] Prophet ShadoW 2.0 TE is not responding...
Why?
Click to expand...
Click to collapse
Flashing ROMs with Vista is unreliable at the best of times. If you have access to XP, use it!

Hi
I don't have, what can i do?

Hacklife said:
I don't have, what can i do?
Click to expand...
Click to collapse
Umm... I don't know...

try downloading vm ware, then install an XP operating system on that virtual image. You'll need over 1.8gb RAM, since you'll be running 2 OS's concurrently. Then install active sync and off you go!
The vmware download is free from their website.
(I did this to upgrade my Prophet - I was lucky enough to already have a VM+XP dvd from work - but I'm sure you'll be able to find an XP image if you look hard enough)

paul c said:
try downloading vm ware, then install an XP operating system on that virtual image. You'll need over 1.8gb RAM, since you'll be running 2 OS's concurrently. Then install active sync and off you go!
Click to expand...
Click to collapse
Depend of the version of Vista. That I say that USB isn't reconised in vmware... DualBoot Power

xvx45 said:
Depend of the version of Vista. That I say that USB isn't reconised in vmware... DualBoot Power
Click to expand...
Click to collapse
sure, dual boot, or a friend... or an old hard disk...
good job!

What is the main point of the error in Vista? is it a driver problem or is it caused by a bug in WMDC? Prophet can connect with WMDC on Vista and transfer data easily, so during the flashing procedure what is done by windows?

It just come ""not responding"" wtf!!!

atakatas said:
What is the main point of the error in Vista? is it a driver problem or is it caused by a bug in WMDC? Prophet can connect with WMDC on Vista and transfer data easily, so during the flashing procedure what is done by windows?
Click to expand...
Click to collapse
Drivers... The RUUs for Prophet do not function fully with Vista - USB communication is handled differently.

Thank you for your reply..
So we will continue with xp for a while..
By the way, you are a moderator now! Conguratulations!

As for the VMware solution and USB ports - I didn't touch anything in the XP configuration, but active sync found my phone via the USB no problem, so I was able to upgrade simply by following the instructions here

atakatas said:
Thank you for your reply..
So we will continue with xp for a while..
By the way, you are a moderator now! Conguratulations!
Click to expand...
Click to collapse
I don't think anyone is going to try to patch the dlls and other files for Vista...
Thanks!

Good news!
i want to try that on my friend's vista pc..

atakatas said:
Good news!
i want to try that on my friend's vista pc..
Click to expand...
Click to collapse
You'll need a copy of WinXP to try it...

Related

ActiveSync 4 Installation on ANY WINDOWS!

Hi There,
Wondering if somebody (XP users) can post content of its "\Program Files\ActiveSync\Drivers" folder here...
I have Win2k3 Enterprise Server and used "Windows 2000" compatible mode (btw, xp <sp2 users can try this cool workaround too) to install AS
So, my ActiveSync works fine (starts/ends) but the drivers supplied with it can't be installed in w2k3 showing error during installation of "WINDOWS-MOBILE BASED" device
So, for everybody having got message box with "Error installing on this machine". Just enable Windows compatibility mode and choose Win2k. After that you probably can sync via irda or BT but not USB
For me now, please somebody attach "WceRndis.inf" file from your system!!!! PLEASE!!!!!!!!
Thx!
On my W2K-system, AS 4 works fine. And here is the requestet file from my system.
Christain said:
On my W2K-system, AS 4 works fine. And here is the requestet file from my system.
Click to expand...
Click to collapse
Thanx Chris!!!
But I'm in need of this file from a person who runs Windows XP or 2003
I'm running Win2k3 and I switched Win2k compatible mode. So I tricked AS installer and AS installed as on Win2k machine. Everything is Ok but the INF file can't be used on Win2k3 because it is designed for Win2k
I AM RUNNING WIN XP PRO SP2 and WIN2K3 SP1 AND HAVE ABSOLUTELY NO PROBLEMS WITH SYNCR NOR CONNECTING VIA USB2.0 IT TOOK ME A WHILE BUT I GOT IT WORKING.
those are the files you wanted:
hope it'll help
svyatko said:
I AM RUNNING WIN XP PRO SP2 and WIN2K3 SP1 AND HAVE ABSOLUTELY NO PROBLEMS WITH SYNCR NOR CONNECTING VIA USB2.0 IT TOOK ME A WHILE BUT I GOT IT WORKING.
Click to expand...
Click to collapse
THANX THANX THANX!!!
That's what i was looking for!
Everybody else with AS problems take a breath and keep your fingers crossed ;-)))
svyatko said:
I AM RUNNING WIN XP PRO SP2 and WIN2K3 SP1 AND HAVE ABSOLUTELY NO PROBLEMS WITH SYNCR NOR CONNECTING VIA USB2.0 IT TOOK ME A WHILE BUT I GOT IT WORKING.
those are the files you wanted:
hope it'll help
Click to expand...
Click to collapse
Hi Mate,
Its me again. Could you also please post these couple of files from XP & 2k3:
Code:
netrndis.inf
Usb_Rndis.ndi
These are somewhere in "INF" or "system32\drivers" folders.
Thank you in advance!

Problems doing update with Vista

Dear Friends i ask help for the follow:
i'm tryng update my s200 for WM6, i follow the instructions when i run the "ROMUpdateUtility_NV_G4" after the reset a message appear in my windows - "ROMUpdateUtility MFC Aplication stops works" one problem makes the program stop work. the windows will close the program.- what i do??? Pease help.
Hello Friend
Use this thread
goodluck
my advice, dont use vista!!! i have a virtual machine installed on my vista for all my ROM updates.
my advice, dont use vista!!! i have a virtual machine installed on my vista for all my ROM updates.
Click to expand...
Click to collapse
Hello
can you please tell me more about it ?
How i do a virtual machine?
msilva said:
How i do a virtual machine?
Click to expand...
Click to collapse
use virtual Pc or VMWare..its' very easy to setup a virtual machine. it's like to intall a new computer, but you don't need a new hardware ;-)
i'm just wondering how they edit the roms so you'Re able to flash it using vista
http://forum.xda-developers.com/showthread.php?t=340578
i don't get it
anubis.genix said:
i'm just wondering how they edit the roms so you'Re able to flash it using vista
http://forum.xda-developers.com/showthread.php?t=340578
i don't get it
Click to expand...
Click to collapse
It has nothing to do with the ROM itself, but with the version of the RUU. HTC simply didn't made a VistaRUU for the (older) Prophet-model. The (newer) Trinity does have a VistaRUU, that's why there are two versions. Unfortunally the RUU's are model-specific, so we can't exchange them (tried it already ofcourse )
So, some genius has to modify a VistaRUU for use with the Prophet (or the other way around). BTW I do have one RUU that does work with Vista, but it isn't able to read any other nk.nbf then the one it came with.
ahhh, now i get it .. thanks for the explanation
now i'm looking for a genius he gets it to work
had the same problem, using vmware now & no problem now!
lightman3dd said:
use virtual Pc or VMWare..its' very easy to setup a virtual machine. it's like to intall a new computer, but you don't need a new hardware ;-)
Click to expand...
Click to collapse
Virtual Pc don't emulate the USB connection.
I myself did create a second bootpartition on my PC with XP. So, now when I startup, I can choose between my main OS (Vista) or the second one (XP).
It is called dualboot. It is a bit of a hassle to set up if Vista is already installed, but the advantage is that XP runs native, without any emulation.
Here it is described very punctual: http://www.anichillus.net/index.php?PHPSESSID=rho4r4287rcptee39sv57rm0f3&topic=26.msg43#msg43
rondol1 said:
I myself did create a second bootpartition on my PC with XP. So, now when I startup, I can choose between my main OS (Vista) or the second one (XP).
It is called dualboot. It is a bit of a hassle to set up if Vista is already installed, but the advantage is that XP runs native, without any emulation.
Here it is described very punctual: http://www.anichillus.net/index.php?PHPSESSID=rho4r4287rcptee39sv57rm0f3&topic=26.msg43#msg43
Click to expand...
Click to collapse
I have ruined my new VISTA notebook, cos I tried to make dualboot OS. Now it goes to Service Center.. Eventhough I just buy for 3 days..
And it won't cover buy warranty..****..
Better to run everything under XP actually.
Make "search" button your best friend!!
I'm using Vista ultimate edition and never had a problem upgrading my JAMin using old or new method! I even made HardSPL with vista just replace and edit .bat file! (why should i install another windows using virtual machine!!!)
This is the one...
Vista upgrade guide should be followed (once) to be able to use the vista_RUU
Guide vailable here:
http://forum.xda-developers.com/show....php?p=1600161
or here (same as above):
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
IF you only wants The vista-RUU:-
http://forum.xda-developers.com/attachment.php?attachmentid=60781&d=1197014861
All what you have to do is to replace the .nbf file and upgrade!
Note: I have been using this since long time and never had problem upgrading my prophet (G3) in windows vista in any matter!
sorry to hear that man... hopefully next time it's ok
i use VMware Workstation, this program has full usb support and i have had no problems with it. just make sure you install the vmtools and dont plug in your phone until you have loaded XP fully and have it full screen.
this i found is the best way for things to happen (updates etc). also usful for bios updates since VISTA doesn't work fully yet
varanusvincent said:
I have ruined my new VISTA notebook, cos I tried to make dualboot OS. Now it goes to Service Center.. Eventhough I just buy for 3 days..
And it won't cover buy warranty..****..
Better to run everything under XP actually.
Click to expand...
Click to collapse
Sorry to hear it didn't work out for you. As I said, it gave me a hassle too, but nothing I couldn't fix with the help of the instructions.
yonn1981 said:
Make "search" button your best friend!!
I'm using Vista ultimate edition and never had a problem upgrading my JAMin using old or new method! I even made HardSPL with vista just replace and edit .bat file! (why should i install another windows using virtual machine!!!)
This is the one...
Vista upgrade guide should be followed (once) to be able to use the vista_RUU
.............
Note: I have been using this since long time and never had problem upgrading my prophet (G3) in windows vista in any matter!
Click to expand...
Click to collapse
You are right, this is a way to get things going with Vista. The downgrade of the USB drivers makes it possible to flash "traditional", I'm doing that succesfully from April last year. But to use a RUU, is a different cup of tea.
The VistaRUU you use is for G3 only.... you've guessed, my device is G4....

Upgrade Rom On Vista

How to Flash Prophet Rom On Windows Vista ?
You Can't!!! use the search there are loads of topics on this each one saying you have to update using XP (or virtual machine)
found this somewhere... not sure if it works...
http://www.anichillus.net/index.php?topic=21.0
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
d'artangnan said:
found this somewhere... not sure if it works...
http://www.anichillus.net/index.php?topic=21.0
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Click to expand...
Click to collapse
Yep, that method works, but the problem is the RUU itself. Allthough you have the right drivers after this procedure, only a modified G3 RUU will be able to flash on Vista.
The traditional way of flashing using os.nb with the Upgrade.bat works though.
Works
The on above does work, but I tend to use ShellTool more often.
bassplaya said:
The on above does work, but I tend to use ShellTool more often.
Click to expand...
Click to collapse
Can you explain about ShellTool?
edit: I found some info. If I understand correctly, ShellTool is the "traditional" way of flashing, integrated in the Upgrade.bat?
vmware
A virtual machine loaded with XP is the best option for flashing comfortably, if you (unfortunatelly poor you) have vista on your pc.
VMware makes it simple and fully functional.
ciao!
I'm happy to say , the vmware does work !
I tried VM+WIN2K on Vista . It works perfectly !
i agree with vmware, have not had a problem running vista home premium running vmware/xp pro & all flashing is A-OK!!
hi.
please give some information about this program ( vmware ).
and is it a free program?
thanks
I'm using a simplified version of vmware found elsewhere on internet .
I'm not sure whether I could put the link here or not ...
milltronics said:
I'm using a simplified version of vmware found elsewhere on internet .
I'm not sure whether I could put the link here or not ...
Click to expand...
Click to collapse
Please give us the link! I tried all methods on Vista, nothing seems to work.
VMware has a trial here
Use it
jasonpowa said:
VMware has a trial here
Use it
Click to expand...
Click to collapse
Of course they have a trial version, but I am not interested. I want that simplified version, coz 189 dollar is way too much only for upgrading. I better keep my old xp machine.
Are you guys sure you have tried all the methods ? I have a G4 prophet and the one from this link
http://www.anichillus.net/index.php?topic=21.0
does work on my laptop with vista! No problems at all !
Try this one at your own risk , lol ,
http://momovw.bay.livefilestore.com...CLvesiVHRSX7r7DxEvMudAD_A/VMware.rar?download
sorry, thread flush only~~
When i use vmware+xp under vista:
Do i have to install activesync under vmware for flashing?
Do i have to deactivate something in Mobile Device Center in Vista
so the phone is only recognized in xp and not in vista?
Thyraz said:
When i use vmware+xp under vista:
Do i have to install activesync under vmware for flashing?
Do i have to deactivate something in Mobile Device Center in Vista
so the phone is only recognized in xp and not in vista?
Click to expand...
Click to collapse
In Vmware menus , there's a 'removable device' option to allow you plug in usb devices . After you activate the function from the menu , your phone will be disconnected from Vista and recognized by the OS you installed in Vmware . Then , you can operate in the VM updating , synchronizing , everything as usual .
In addition to the previous advice, you must install ActiveSync under your VM-XP. You must look at it as a seperate computer, it needs to have all the software and drivers to perform.

Rom Upgrade on virtual machine?

Hi all,
I am running on MacOSX and I have a prophet.
Unfortunately I input a Kayser rom and now my Prophet does not recognize any touch gestures.
Is it risky to upgrade through a virtual machine?
Thanks for your reply or comments.
hi
no its not risky... i also did it on windows 7... i just install xp on my vm from microsoft... and then upgrad my prophet under xp... and its working fine...
greeze..
ps: r u using a mac or just install a mac on a normal pc... if you install it on a pc, can you tell me how to do it?? i want to try it on my old notebook.. thx...
thanks!
However I am wondering if your reply is good to me...
Your both system are windows...Do you think it changes anything if I am on Mac and open a virtual machine...
I will give it a try, post the result in half an hour...(I hope!)
i couldn't upgrade using vista initially, but after using vmware & installing win xp, it all went ok. done this a lot of time with no problem.
only thing is when you are doing in vm, make sure you are in the vm window while it is upgrading, if you change window back to your osx, the usb connection might be lost & screw the upgrade

Update rom for Windows 7?

Is there a solution for this please?
Thank you
I use Windows 7 with the new "windows virtual PC" and the "Virtual Windows XP" and I can flash the ROM
Donwload: http://www.microsoft.com/windows/virtual-pc/download.aspx
regards
rosi
My laptop doesn't runs xp mode what to do?
You purchase xp...or...ask one of your friends for their copy when they upgrade to Windows 7.
roswitina said:
I use Windows 7 with the new "windows virtual PC" and the "Virtual Windows XP" and I can flash the ROM
Donwload: http://www.microsoft.com/windows/virtual-pc/download.aspx
regards
rosi
Click to expand...
Click to collapse
Awesome!! thanks for the info. i'm trying this now. I so hope that this is working right.
edit: nope.. doesn't work on my machine
Same
My Laptop (which is old) keeps powering off whenever i plug my wizard in. I'm going to try on a server 2003 build. What error did you receive when you tried with XP?

Categories

Resources