Hi all.
When I will update my device, AppToDate presents this error:
"An error occured while retrieving the 'Athena Config App' update. The update will not be installed.
3 available downloads:
AppToDate 2.08.04.28 (update done, but still avaliable)
Athena Config App 1.0 (error)
Athena Project ROM 4.0 (I can't select for update)
Anyone?
______________________________________________________________________________________________
Same error. (I think)
jsosow said:
When I ran AppToDate the first time it said it needed to update. It did this but now when I start it is says it has 3 updates, it runs and then I get a error message. You then have to quit the error message. Can anyone help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=379773&page=25
______________________________________________________________________________________________
Only this, the rest is ok (thanks raskell for WIFI MAC solution)
(Sorry for my poor english - thanks Google Translator)
Related
New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
Hi,
I'm trying to install TomTom5 on WM2005. When I start TomTom's setup.exe I choose language and after that "install the application" choice. It shows me list of software which will be installed on my device (TomTom, GPS, Today, Bleutooth Support, English - Jane (GB)). After clicking right arrow I get error message "TomTom Setup Application has encountered a problem and needs to close. We are sorry for the inconvenience." and setup won't go any further. Has anybody else had similar problems with installing?
You need to copy the cab files over to the PDA and run them from there.
then follow this link
http://forum.xda-developers.com/viewtopic.php?t=22706&highlight=
Followed your instructions and got TomTom installed. But now it's tomtom navigator.exe crashing. Doesn't TomTom have support for wm2005? Would be nice to know if there'll be patch to make installation with setup.exe work without crashing. Meanwhile my only chance seems to be to downgrade back to wm2003se.
Do you have the legal version of tomtom?
I used the illegal (couldn't wait for my update) and needed to install/run tomtom 4 on my pda before running tomtom 5; otherwise it would crash after selecting a map.
I had the problem with TomTom crashing, caused by the version of WM2005.. Now using Rom Version as 1.50g.00WWE, and all is ok
As for the version of tomtom yes im using the illegal version orderd the real thing on the 4th June.. and I'm still awaiting for it to drop through the postbox.. tomtom support page claims it still in the warehouse! although I now see i have been billed :x
how do all. well i have tried to update my rom again to the new shaps 4.30 but i keep getting errors.
the error being
RUUWrapper.exe - Application Error
The application failed to initialize properly (0xc0000135). Click ok to terminate the application.
Any idea whats causing this? i tried to use other roms but none of them have updated but the official T-Mobile one.
Active Sync is active and connected when i do it and also updated the Radio so i dont know whats causeing it
Any help will be greatly appreciated
update your .NET framework dude.
MS .Net Framework 2.0
MS .Net Framework 3.5
Install both and try again.
Cheers pal. will try it now and let you know
just updated it and its working fine now. cheers for that i right thought i messed me hermes up big time !
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Click to expand...
Click to collapse
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
ah. that makes sense. thanks.
gc14 said:
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
Click to expand...
Click to collapse
when i try to run live search says i need to install net3.5??? im on dcd 3.1.2 and i get the same error when i try to install
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
I don't know what the problem was on your phones....maybe a bad flash...
3.1.2 has cf 3.5. It's located in the SYS folder of your kitchen in a directory called NetCF35 and gets cooked in.
not sure. but net 3.5 didnt show up in list of programs until i installed it myself. i probably already had it. no harm no foul.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Great tip!
This worked for me with the same problem installing NETCFv35 on a Diamond.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Does 3.5 contain everything that 2.0 has? Meaning will programs running with 2.0 work the same with 3.5?
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
GeLopez said:
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
Click to expand...
Click to collapse
Well, I tried what was suggested and it still didn't work.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
Click to expand...
Click to collapse
Worked great! Thanks for the tip. It was driving me crazy
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
YEES! Works HTC TOUCH HD BLACKSTONE
or by changing the DWORD Value! NET CF 2.0 to replace its dword value to = 0, whereas NET CF 3.5 dword value = 1
Hello everybody
Since I flushed the ROM of my Raphael with TiR V 10 some installations fail (that worked in first place, before flushing TiR v10) with the message:
Installation of xxx.cab was unsuccessful. The installation file is not intended for this device.
I came across this error when attempting to install: MinimoCE_0.016, Bejeweled2, Mind Sweeper etc.
So I was wondering, if this is just a registry key that causes these installs to fail.
Any clue where and what i'd need to modify to get these installsworking again?
Thanks for you input
Regards