UPDATED: SEPTEMBER 26, 2008
September 26, 2008, 8:23 PM EST
Alltel Beta 6 is up.
Please post your results for both sending and receiving.
GC
-------------------------------------------------------------------------
September 26, 2008, 6:52 PM EST
Alltel Beta 5 is up. I'm just going to be making 1 change at a time for each beta from this point forward so I can tell exactly what the issue is. Sorry for all the uninstalling/reinstalling, but it is necessary to properly test.
Please post your results for both sending and receiving.
GC
-------------------------------------------------------------------------
September 26, 2008, 5:32 PM EST
Alltel Beta 4 is up.
Please post your results for both sending and receiving.
GC
-------------------------------------------------------------------------
September 26, 2008, 4:19 PM EST
Alltel Beta 3 and USCC Beta 1 are up, so please test them out and post results for both sending and receiving.
I've made a very minor change in the VZW Arcsoft setup dll and have re-uploaded the new one.
GC
-------------------------------------------------------------------------
September 25, 2008,
Alltel Beta 2 is up.
Please post your results for both sending and receiving.
GC
September 24, 2008,
Ok Alltel users, you ready for some testing? I've posted Beta 1 for download. If you already have an Arcsoft cab installed, uninstall it first. The setup dll is incorporated and should add a string value of "X-Alltel-MDN" with your MDN with a "1" appended to the front of it as data to HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\mm1\WspHeader. I don't have Alltel so I haven't been able to test anything AT ALL except the setup dll, so I apologize if it doesn't work. Don't forget though, this is only Beta 1.
Please post your results for both sending and receiving.
GC
-------------------------------------------------------
September 21, 2008,
Alright, I've updated the VZW 5.0.70.24 cab. The Alltel setup dll is still being worked on so please be patient. I'm also now working on a beta USCC Arcsoft cab, and if I get the proper information for Cricket, that's next.
I've fixed the following bugs (I think) in this latest cab:
- Date/Time issue some users reported
- Default connection now properly set to "Verizon Wireless" instead of "The Internet"
- Send limit options now properly displayed as 100K, 300K, and 399K instead of 0K, 0K, 399K, 0K, 0K.
- Default send limit of 399K now properly set upon install.
Ya just had to ask my friend....
Where is the link??
In the first post
All worked for me as you have directed. I will actually test the MMS here and report back.
Update:
Both versions have installed and worked correctly for me. Thanks gc for making this easy for us.
I have MMS working on my phone with dcd VZW Arcsoft MMS 5[1].0.31.19 which GC i think you posted in another thread on here recently. It works fine for me. What is different between this one and the one i have?
I have MMS working on my phone with dcd VZW Arcsoft MMS 5[1].0.31.19 which GC i think you posted in another thread on here recently. It works fine for me. What is different between this one and the one i have?
Click to expand...
Click to collapse
I have coded a setup.dll in Embedded C++ which is included with Arcsoft for Verizon customers that gets rid of the need for Mortscript and a soft reset in order to retrieve the X-VzW-MDN key.
Testing of this would be greatly appreciated, as in the future we'd like a complete out of the box Arcsoft solution for all carriers. This is the first step.
Everything worked and was in the registry as you said.
It did not send at first, then I looked at the servers in MMS. The sample server is gone now with the Verizon Server being the only and default.
Within that, I scrolled down and it said that "Connect Via: The Internet" I changed it back to Verizon Wireless and works like a charm. Sent a pic to myself, send and receive are now flawless. Great Job.
I am not sure if Conect via the internet was a fluke or not. Just thought I would let you know.
I'm not sure what is supposed to be different about this one vs dcd's last cab release... but still no camera/attach integration working.
Is there any way to post the OEM that I can drop into a kitchen. I am going to redo my ROM and would like to include this.
gc14 said:
I have coded a setup.dll in Embedded C++ which is included with Arcsoft for Verizon customers that gets rid of the need for Mortscript and a soft reset in order to retrieve the X-VzW-MDN key.
Testing of this would be greatly appreciated, as in the future we'd like a complete out of the box Arcsoft solution for all carriers. This is the first step.
Click to expand...
Click to collapse
sorry GC I don't understand what this means as its a little high level for myself. I would love to try it anf provide feedback but without knowing what i should be looking for I can't do much.
Running latest radio and DCD kitchen rom.
Previous Version: DCD 5.0.31.19
Uninstalled and checked registry per instructions, then soft reset.
Ran cab, installed to Device.
X-VzW-MDN was set correctly.
I could not send a MMS at first, but I think it was because I had it hooked up to ActiveSync. I was just now able to send and receive a message with no problems.
Everything worked and was in the registry as you said.
It did not send at first, then I looked at the servers in MMS. The sample server is gone now with the Verizon Server being the only and default.
Within that, I scrolled down and it said that "Connect Via: The Internet" I changed it back to Verizon Wireless and works like a charm. Sent a pic to myself, send and receive are now flawless. Great Job.
I am not sure if Conect via the internet was a fluke or not. Just thought I would let you know.
Click to expand...
Click to collapse
Hmm I'll look into that. That doesn't happen when I install it.
I'm not sure what is supposed to be different about this one vs dcd's last cab release... but still no camera/attach integration working.
Click to expand...
Click to collapse
This is the exact same build of Arcsoft that was included in dcd's cab. Therefore there will be no fixes or included features. I think a lot of people are confused about the purpose of this. I'll explain at the end of my post.
Is there any way to post the OEM that I can drop into a kitchen. I am going to redo my ROM and would like to include this.
Click to expand...
Click to collapse
No. That is defeating the whole purpose behind this project. The Arcsoft OEM was purposly removed from the kitchen in order to develop an out of the box MMS solution for ALL carriers.
sorry GC I don't understand what this means as its a little high level for myself. I would love to try it anf provide feedback but without knowing what i should be looking for I can't do much.
Click to expand...
Click to collapse
The Arcsoft MMS package used to be included in the kitchen (along with carrier selection). dcd removed it because each carrier requires its own settings, whether it be an X-blah-MDN key in the registry, different server settings, etc.
For a while now, our goal has been to develop a setup.dll to be included with the cab install which will run a carrier check, then provision Arcsoft correctly for that carrier. It requires a lot of coding to interact with the registry.
dcd's Verizon MMS cab has the Verizon MMS server info hard coded into it (which is why it won't work for other carriers). The only downfall to his cab, was that it still had no way of including that one beloved registry key that we've all known to love...X-VzW-MDN, which is different for every user because it needs to be set to their own phone number. In order to circumvent the problem, dcd included Mortscript and a script that adds itself to \Windows\Startup so the next time you soft reset, the script runs and fetches your phone number from the registry to set the key and then deletes itself, hence why a soft reset is required when using his cab. This was only a temporary fix, and only worked for Verizon as the mortscript was hard coded as well.
As I said, this is the first step in this project with much more to come. This cab is stripped of Mortscript and the start up script, and includes version 1 of the setup.dll I mentioned. So far, it's only coded for Verizon. I've asked you guys to test it, just to make sure this part of it works. Later, I'll hopefully be able to add more code to make it work cross carrier and fetch the required information.
Hopefully this clears it up for people.
Hopefully this clears it up for people.
Thank you GC for your explanation! I think this should minimize plenty of questions/concerns you may have gotten. Also thank you for your continued interaction in the forums!
Haha I know I just posted this cab for testing, but in this short time, I've managed to stumble across a newer build of Arcsoft and I've edited it to include the setup.dll. So if anyone wants the new build, I've posted it in the first post.
SWEEET ASSS CAB..... GC - Very nicely done.....
I cooked the program into my last ROM. Could I remove the registry string and then install you newer version to see if it picks it up? Would that be a good test?
I don't see why that won't work, give it a try... what was your previous version...?
azclown said:
I don't see why that won't work, give it a try... what was your previous version...?
Click to expand...
Click to collapse
I was on ver: 5_0_31_7.
I deleted the whole ArcSoft folder key and then rebooted. Then installed the newest cab and it pick up the registry string correctly. Seems to be sending and receiving after the install with out any other adjustments.
I was on ver: 5_0_31_7.
I deleted the whole ArcSoft folder key and then rebooted. Then installed the newest cab and it pick up the registry string correctly. Seems to be sending and receiving after the install with out any other adjustments.
Click to expand...
Click to collapse
Hmm...it may still be working, but you might not have it installed correctly. You might be using a cross between the two. If it works for now, that's fine, but the next time you flash or perform a hard reset I wouldn't do it again like that.
Just for curiosity...when you open up SMS \ MMS, and go to MMS Options. In the About tab, what does it say for your MMS Composer version?
Related
Okay. So here is the one issue that I have been having with this particular Rom.
I can receive MMS messages just fine, but I cant send them. When I hit send and receive it says error synchronizing. The crazy thing is that in the progress icon for sending MMS it goes to 100%, however it never leaves my outbox and the other person never gets it.
I changed the settings under server to the correct ones:
Server settings that need to change:
Gateway: "blank"
port: 80
Server address: http://mms.vtext.com/servlets/mms
Sending Size limit: 350k or 400k
Any ideas? This is the only problem I have had so far! btw, like I said in my title, im on VZW. Btw, I know about the Arcsoft Sprint MMS hack, however if possible I would like to use the version on Arcsoft that came with the DCD rom as it has a lot of features the old sprint hack does not. Thx.
-Sayajin
if you are on verizon you dont use the sprint hack, you dont need a hack at all. make sure you did not make any changes before you set up your MMS. i know several people that did some things and thought it was the arcsoft but it was something else they had changed. from scratch, only change the registry (did you make these changes?), the server and the connection. then it should work, almost guaranteed. this is in multiple posts so just search and you will find tons of them.
Sounds like my problem may be that I didint make those registry changes you were referring to. Other than that, the only thing I did was put the correct server in.
What registry modifications do I need to make in order for it to work on VZW?
btw, I wanted to add that I searched and found some threads on this issue and the correct settings for T-Mobile, but i diddnt see one for VZW.
Thanks a lot.
-Sayajin
MMS reg
SSJSayajin,
Follow my directions here... http://forum.xda-developers.com/showthread.php?t=364043&page=30
Use the reg file and edit it......
Thanks a lot man your a Savior! One issue however, I am open the file and modify it with no problem, however I cant import it!
I am using Total Commander as my file explorer and PHM Regedit as my registry editor. When I click the file a "do you want to import this" does not come up. It actually opens up PHM Regedit, however the option to import the file is greyed out.
Any Ideas? This is my last issue! Thx.
*edit*
So I found out the problem, PHM does not allow you to import reg entries. So how do I open up the default reg editor so I can import this? Thx guys.
-Sayajin
I have a problem with the MMS registery hack you posted, I downloaded it, removed .txt, edited my phone number, transfered it to my phone but in file explorer or total commander when I click on it, it gives me a error " there is no application associated with "Verizon MMS settings for Arcosoft 4281" run the application first, then open this file from within the application" I am running DCD 2.2.6 rom,any help? thanks
Well I figured out one issue, as far as importing the reg file, use DotFred's Task Manager. It has a built in reg editor that works perfectly.
But my stuff still doesnt work properly! I imported the reg entry and I know it worked becuase it added more items to my phone, however I have the same problem of being unable to send mms. Does the exact same thing as before with the error of unable to syncronize.
Any ideas? Thx.
-Sayajin
i am testing this now. did a hard reset, imported it and i'll test it out.
that didnt work. I am juust going back to 3.2
i could send but not recieve
1st - Are you guys on Verizon?
2nd - Did you read the entire thread that I linked too.... It has other items you will need to do..... That thread resolved most if not all issues relating to using MMS with Verizon. Now when I put a new ROM on my phone, I have added the registry entries in MY file to the OEMizer and that adds it automatically to the ROM, so I get MMS right away with my new ROM..... Like I am on DCD's 2.3.1 right now, and I have MMS just fine.... Please go back and read that other thread entirely.... It will help guys.....
azclown said:
1st - Are you guys on Verizon?
2nd - Did you read the entire thread that I linked too.... It has other items you will need to do..... That thread resolved most if not all issues relating to using MMS with Verizon. Now when I put a new ROM on my phone, I have added the registry entries in MY file to the OEMizer and that adds it automatically to the ROM, so I get MMS right away with my new ROM..... Like I am on DCD's 2.3.1 right now, and I have MMS just fine.... Please go back and read that other thread entirely.... It will help guys.....
Click to expand...
Click to collapse
that thread is lots of pages long.. is there a way we can get a summary?
Not to be an ass, but thats how you learn... read... I've been lurking around here for about 1 3/4 months, and really have done nothing but read as much as possible.... so really it's up to you to summarize it for yourself. I'd have to re-read it again to be able to summarize it, and I don't have the time to do that research again..... sorry....
azclown said:
Not to be an ass, but thats how you learn... read... I've been lurking around here for about 1 3/4 months, and really have done nothing but read as much as possible.... so really it's up to you to summarize it for yourself. I'd have to re-read it again to be able to summarize it, and I don't have the time to do that research again..... sorry....
Click to expand...
Click to collapse
lol, youre not being an ass. thats what i would say.
what i meant was, there's more to it than just importing the reg file right?
so, i imported the reg file and it had a random character in the gateway field, so i removed that and i can send fine, but i still cant receive. I'll look through that thread more and see whats going on here.
Are you using Arcsoft MMs ver 4.2.81 right?
EDIT: When you download my reg file, it comes with a .txt extension. When you save it, does it's icon change? If not, then it's not being saved as a registry file....
azclown said:
Are you using Arcsoft MMs ver 4.2.81 right?
EDIT: When you download my reg file, it comes with a .txt extension. When you save it, does it's icon change? If not, then it's not being saved as a registry file....
Click to expand...
Click to collapse
Yea, its version 4.2.81. Also Yes, the registry icon changes once you remove the .txt extension. The file imports just fine, it just doesnt resolve the issue. Also yes, its on Verizon.
While I realize that reading that 60+ page thread will help, unfortunately I would rather not spend 2 hours reading the thread for a solution that someone may know off hand. Now of course if thats not possible I will have to read it, but I was hoping someone would know of a fix?
What else needs to be done in order to be able to send and receive MMS messages in addition to the registry hack that was pointed out?
-Sayajin
yeah, its verizon and i have that version of arcsoft. whast odd is that it was working fine on 2.2.6, on 2.3.1 it isnt. i even used oemizer to setup the registry entries and still... i can send but not recieve.
i am completely stumped
Okay, So I broke down and read about 30 pages of the thread to look for MMS issues. This is what I have found in a summary.
1. Install the Reg file in this post.
2. Delete every other server listed under MMS servers
3. Delete the random character that shows up under Gateway in server settings.
4. Go into the registry and where it says Default as the value for anything, change it to Verizon Wireless.
5. Soft Reset
Thats about everything I got from the post after reading 30+ pages. Still have the same issue....
-Sayajin
FWIW - This is about the only thing I can think of that might help.... Go into your registry and delete the config key under ArcSoft MMS UA.... Then import this reg file, its straight from my 6800 this morning, and I can confirm it works just fine for me..... I zipped it so there is no need to change the extension..... I send and received MMS from myself and from a friends phone he let me use.... I just tested this out.... I also tested my config by changing the sending size and when I upped it, I couldn't send anymore..... So trying to send larger files may mess up your ability to send MMS..... Hopefully this helps..... If the import doesn't solve the issue, then hard reset, imput the reg and test again......
I'm trying to help as much as I can.....
Thx a lot for the assistance man!
One issue, when trying to import the new file it says "error the selected file is not a registry script unable to import" any ideas on that one?
Thx.
-Sayajin
I have MMS working on DCD's newest 3.1.2 ROM with the 3.39 Radio as well.
1. I installed the 3.39 Radio using the stock Sprint 3.39 Test ROM.
2. I installed DCD's 3.1.2 ROM using the kitchen with the Arcsoft OEM from DCD's 3.0.4 Kitchen cooked in.
3. I installed the Verizon Customization CAB
4. I added the string X-VzW-MDN with a value of my ten digit phone number to HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader in the registry.
5. I changes the MMS setttings to:
Server settings that need to change:
Gateway: "blank"
port: 80
Server address: http://mms.vtext.com/servlets/mms
Sending Size limit: 300k
Now my MMS works fine.
Hope this helps people since for some reason everyone sort of skirts around this topic.
did u try MMS video? just seeing if yours is working ok. mine was working then it wasnt then it was...
There is a thread SPECIFICALLY for mms on 3.1.x. It was started to stop the crazy amount of posts in the kitchen thread and to thwart against tons of new threads like this. Please, from now on post in that thread to discuss ANYTHING to do with MMS on 3.1.x
Thanks
schwillyd530 said:
3. I installed the Verizon Customization CAB
Click to expand...
Click to collapse
I found this thread very helpful, accurate, and concise. Thanks for your post. One quick question...did you use the previous Verizon .cab (with mms) or the new one posted on the 3.1.2 thread?
MMS
bdlane said:
I found this thread very helpful, accurate, and concise. Thanks for your post. One quick question...did you use the previous Verizon .cab (with mms) or the new one posted on the 3.1.2 thread?
Click to expand...
Click to collapse
I used the new one with the 3.1.2 ROM
Thanks
Yes this fixed mine as well. Thanks for posting it.
You guys do know that there are other people out there on other carriers trying to get MMS working too? That's the reason for the dedicated MMS 3.1.x thread.
Also, you do realize that if you use the verizon carrier cab that I posted, with the MMS settings, and not the new one, that you don't have to go in and change anything in the server settings.
gcincotta maybe I found you. I have falshed my xv6800 w/ dcd 3.1.2 with the 3.39 radio and I installed the verizon cab. Everything is werking fine after the over the air prog. But the OS does not have the personal settings tab, there is no voice command, and there is no slide sounds settings. Can you please advise??? please...
gcincotta said:
You guys do know that there are other people out there on other carriers trying to get MMS working too? That's the reason for the dedicated MMS 3.1.x thread.
Also, you do realize that if you use the verizon carrier cab that I posted, with the MMS settings, and not the new one, that you don't have to go in and change anything in the server settings.
Click to expand...
Click to collapse
MMS settings are different for each carrier. That's why it doesn't make sense to do your "collective MMS" thread.
Say i have verizon, i need to sort through tons of unrelated crap to find an answer. This thread is short, concise, and it works.
Please stop complaining.... If you have a CAB which does this for us. Than please post it.
MMS settings are different for each carrier. That's why it doesn't make sense to do your "collective MMS" thread.
Say i have verizon, i need to sort through tons of unrelated crap to find an answer. This thread is short, concise, and it works.
Please stop complaining.... If you have a CAB which does this for us. Than please post it.
Click to expand...
Click to collapse
This is not complaining, this is common sense. MMS settings are indeed different for each carrier, but if you actually read my posts you'd find that you do NOT have to touch your settings WHATSOEVER as long as you use the carrier cab WITH MMS settings. I do have a cab that does this for you, and if you took a minute to fill out a search box you'd find it ALONG with my instructions on how to make it work. All you have to do is enter your MDN key, which can be done using UC AUTOMATICALLY. As far as I'm concerned, this thread is pointless and clutter, as EVERYTHING stated in it has either already been said, or is moot.
If you search my posts you'll find that I help a LOT of people, and I love doing it, but when ignorance like this is thrown into the mix, it makes it a lot less rewarding.
Halkeye, shoot me a pm and we'll get your situation squared away asap. No reason to continue this thread, especially with off topic stuff.
gcincotta said:
This is not complaining, this is common sense. MMS settings are indeed different for each carrier, but if you actually read my posts you'd find that you do NOT have to touch your settings WHATSOEVER as long as you use the carrier cab WITH MMS settings. I do have a cab that does this for you, and if you took a minute to fill out a search box you'd find it ALONG with my instructions on how to make it work. All you have to do is enter your MDN key, which can be done using UC AUTOMATICALLY. As far as I'm concerned, this thread is pointless and clutter, as EVERYTHING stated in it has either already been said, or is moot.
If you search my posts you'll find that I help a LOT of people, and I love doing it, but when ignorance like this is thrown into the mix, it makes it a lot less rewarding.
Halkeye, shoot me a pm and we'll get your situation squared away asap. No reason to continue this thread, especially with off topic stuff.
Click to expand...
Click to collapse
Well i just did a search "Verizon MMS" it came back with this thread and your other thread and a bunch of useless threads (no i didn't look at every one, if it doesn't have a clear title no one will look at it) none of which have this CAB file your talking about. Regardless These instructions are great for people who have already run the DCD Verizon customizations and don't want to re-flash and then run your customizations. I still think this thread is relevant and again if you have this CAB i think it would still be useful to post it.
I will be posting complete instructions in the other thread along with the cab file.
i dont get it, what the difference between mms and sms...i can already send photo or video as txt message attachments, and the receiver gets them just fine...whats the advantage of sending an mms message?
-connor
crobs808 said:
i dont get it, what the difference between mms and sms...i can already send photo or video as txt message attachments, and the receiver gets them just fine...whats the advantage of sending an mms message?
-connor
Click to expand...
Click to collapse
that is an mms message.
so i take it you gave the custom roms another shot? did everything work out this time?
im sorry for the troubles you had before, im trying to incorporate something in my next version to prevent vz troubles like you had.
How come there's no MMS when I go to receive/send pictures? How can I get it back?
I have DCD 3.1.2 rom, and the 3.72.20 radio
paulash said:
How come there's no MMS when I go to receive/send pictures? How can I get it back?
I have DCD 3.1.2 rom, and the 3.72.20 radio
Click to expand...
Click to collapse
run this cab
It looks like that cab coffey attached is Verizon Wireless specific. We should find out what carrier paulash needs before giving this out. What carrier are we talking about here?
Yeah, I'm still trying to figure out how to get MMS with Sprint.
assuming from reading his other comments on other threads he's on verizon. that's why i went ahead and posted it
coffey_joshua said:
assuming from reading his other comments on other threads he's on verizon. that's why i went ahead and posted it
Click to expand...
Click to collapse
Thanks a bunch Joshua I do have verizon, here it goeeess!
coffey_joshua said:
assuming from reading his other comments on other threads he's on verizon. that's why i went ahead and posted it
Click to expand...
Click to collapse
this doesn't work for some reason. Do I add verizons #777 or does it send through a wifi network??
did you soft reset?
coffey_joshua said:
assuming from reading his other comments on other threads he's on verizon. that's why i went ahead and posted it
Click to expand...
Click to collapse
OK, cool. I just wouldn't want someone unknowingly installing this on their device without realizing it was for vz. It may be a good idea to edit the post incase someone else stumbles on it in the future.
Uhhh it says VZW right in the freakin file name. If someone installs it and doesn't have VZW, then they have no business upgrading their phone to begin with
paulash said:
How come there's no MMS when I go to receive/send pictures? How can I get it back?
I have DCD 3.1.2 rom, and the 3.72.20 radio
Click to expand...
Click to collapse
Paul, did you install the verizon carrier cab???
I have DCD 3.2.0 & 3.35 Radio and ran the Verizon CAB after upgrading from 3.1.4, but MMS doesn't exist anymore. I'll try the cab in this thread.
Read the changelog. It clearly states Arcsoft was removed. Install the Arcsoft MMS cab after installing the carrier cab.
Thanks, I missed that line. Phone is resetting now...
gc14 said:
Read the changelog. It clearly states Arcsoft was removed. Install the Arcsoft MMS cab after installing the carrier cab.
Click to expand...
Click to collapse
Wait... is there a different change log I should be looking at? Regardless, MMS is back to normal after running the .CAB. Thanks.
3.2.0
http://forum.xda-developers.com/showthread.php?t=402920
dcd's titan rom:
CHANGED:
Power Management
Dialer
Commmanager
Calculator
Relaxed security
Volume tweak
Touch-like skins
MMS included if carrier supports it
Mortscript included
UC Compatible
REMOVED:
Encryption
SQLCEMobile
Entertainment (Games)
HTC Homeplug
Windows Live
Adobe Reader
HTC Zip
Jbed Java
Wait... is there a different change log I should be looking at? Regardless, MMS is back to normal after running the .CAB. Thanks.
Click to expand...
Click to collapse
That is not the changelog, that's just a list of what was changed/removed. The changelog is in post #2, though for 3.2.0, he only posted the changelog for 3.2.0. Arcsoft was removed a while ago and is in prior changelogs.
XV6800
DCD 3.2.0 w/Arcsoft MMS installed afterwards
Radio 3.42.40
Can someone else try this?
Receive an MMS message with image/text.
Click the icon in the convo thread to view the content.
While viewing the content, Menu --> Forward
What happens for you? For me at this point it just puts me back to the SMS\MMS Inbox and nothing else. Am I doing it wrong or is this a known issue?
Thanks!
What version of Arcsoft did you install?? I am currently debugging the registry for the change right now..... Hold tight, when a fix is found it will be posted and then a new cab will be made....
Arcsoft MMS 5.0.31.19 I believe, is there a way to confirm?
*edit*
Yep... remove programs says : dcd VZW Arcsoft MMS 5.0.31.19
FIXED it Scorp.... See my MMS post.... BTW - Get GC's newer version.... WITH the fix integrated here....
http://forum.xda-developers.com/showthread.php?t=404345
It's not intregrated into my cab yet, I'm working on it now...should be done within the hour.
gc14 said:
It's not intregrated into my cab yet, I'm working on it now...should be done within the hour.
Click to expand...
Click to collapse
I think many of us have been looking for this. Thanks GC.
You're welcome, but thank azclown too. I've been really busy at work since I got back from my vacation and haven't had time to look into it...he found the reg key. I'm integrating it into my cab.
gc14 said:
You're welcome, but thank azclown too. I've been really busy at work since I got back from my vacation and haven't had time to look into it...he found the reg key. I'm integrating it into my cab.
Click to expand...
Click to collapse
Ok then.... thanks Azclown
Rock on, nice work guys! Would you mind leaving a quick post when the integrated CAB is uploaded?
scorp508 said:
Rock on, nice work guys! Would you mind leaving a quick post when the integrated CAB is uploaded?
Click to expand...
Click to collapse
Go here, it is also in the main Titan upgrading thread.
Got it, thanks. Uninstalled, checked reg, and am reinstalling now...
I have Verizion Wireless. I just installed BootLoader 2.40, Titan_Radio_ROM_3.42.30, dcd_titan_kitchen_3.2.2, and dcd Verizon Carrier 20080706.cab. I don't know if I was supposed to, but also did *228 option 1 to program my phone and *228 option 2 for updating roaming cababilities. The internet works fine on the phone and I can recieve text messages without any problems, but I can't make or recieve phone calls. Thanks for your help and time!!
Gonna go out on a limb here and guess that it's saying you're not authenticated?
You need to call Verizon and have them authenticate you. It's normal when you go from stock to a GPS radio.
I go with gc14 on this one. Just had the same thing happen to me a while ago after just doing a hard reset...no update ROM, radio, or anything. Just hard reset and no more authentication...what a pain. lol
Oh, yeah. I listened again and that's what she said. OK, I'll call them tomorrow.
I even got my TomTom GPS software working. I didn't need to use any 3rd party software to get it working either like it said on the forums.
I even got Opera Java working, but I got some kind of message when I was installing the Java software saying that Sprint couldn't guarantee something. I don't remember the exact message, but I don't have Sprint, I have Verizon. Did I install the wrong ROM or something? Am I going to have problems now? Thanks!
How come everywhere I go now it thinks my phone is a Sprint PPC-6800, when it's really a Verizion XV-6800? I just went to Yahoo.com and it's calling my phone a Sprint PPC-6800. Is this going to cause any problems with my Verizon account? Thanks..
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Apota said:
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Click to expand...
Click to collapse
I don't use text messages, so I can't be sure, but I think there are other links about text messages. You likely need to install a program. Try searching and let us know if you find it.
As far as the flash with v5 of camera, I think you are out of luck. My memory is there is no flash. There is a way of installing the old camera back without doing a hard reset. I just don't remember how to do it. You can try searching for this too. Again let us know if you find it. Hopefully someone else will be able to help more.
Yes, I think I found the solution, I did what it said and now it says SMS/MMS, but I haven't tested it yet. So, I'll see. I just need to know about the camera now. That's the only issue..
http://forum.xda-developers.com/showpost.php?p=2220029&postcount=6
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
don't down grade just reflash a cooked rom with the version 4.05 something camera has a flash
Reflashing ver 4.05 when you'd installed ver 5 IS downgrading in my book
Big Dawg 23 said:
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
Click to expand...
Click to collapse
1st - The camera you used is version 5, to have the flash again you will need to re-cook a ROM with version 4.X....
2nd - For the latest MMS, use GC14's 5.0.31.25 cab of Arcsoft. The incoming MMS issue where the phone number is shown instead of your contact has been fixed. Find that cab here MMS 5.0.31.25
Yes, I've already read all of those links many times. I saw the information about the OEMizer. It said it was OPTIONAL. It doesn't really tell me what it is, or what it's for. Since this was the first time I ever installed a new bootloader, radio, rom and VZW cab, and didn't really know what I was doing, I didn't want to make it too complicated and overwelm myself. I still don't know what the OEMizer is, but I guess I can run it and see what happens. I need to make a new ROM anyways for the camera. I still have a few questions.
- What is the OEMizer for and is there someplace that explains it's settings?
- I can't find OEMizer in the Kitchen's Tool directory or any of the other Kitchen's directories. Where is it at? I did a search on the internet and couldn't find it.
- What is PagePool Changer? Is that something I need to use?
- Now I have the latest bootloader and radio installed in my phone already, can I make a new rom via the kitchen and just install it without having to worry about anything else?
- I guess I will still need to run the VZW cab file after I install a new ROM, but that should be it, right? Just those two things?
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
- WM6.1 is grouping all my text messages together, which is great and I love it, but the only problem is sometimes I want to deleate one text message and it seems like you can't and you have to delete all the text messages from the same person. Is that true, or is there a way around it?
Thanks everybody again for all your help!!!
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
Click to expand...
Click to collapse
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
To use this, uninstall any version of Arcsoft you may have installed currently. Once it is fully uninstalled, check your registry and make sure there is nothing for Arcsoft under "HKLM\Software." Next, install this cab. Once it is done installing, check your registry under "HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader" and make sure X-VzW-MDN is set correctly with your phone number.
gc14 said:
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
Click to expand...
Click to collapse
Yeah that was just for testing purposes originally...to make sure the previous one was completely uninstalled, then to make sure the new one installed correctly. It's been verified working though for a while.