Hi
I seem to experience this problem on all HD2s. I activated the phonelock on HD2 and used a simple PIN for unlocking it. When I'm in the LockScreen, keying my PIN, the phone goes to suspend mode (or it seems like it, since the screen just blacks out and i need to press the power button again to see the lockscreen) after about 13 sec, everytime. This phenomenon happens only when phone is using battery power. It works fine when running on external power.
Is there a way disable this issue, or extend the time it blacks out. I'm using the default WM6.5 rom 1.66.707.1
Please help, Thank you.
same problem with me ! any solutions ???
settings menu all settings system power backlight
try increasing the timeout.
also settings menu all settings lock
see what options are in there. (mine won't start so i can't test it.)
I have tried all the settings i can find on the phone. I even tried changing Registry values that might be related to the timeouts. but still the same.
The screen will black out even while you are typing, so this rules out all the timers that will suspend the phone when idle for too long.
Please help, as this is a big issue for me.
Thanks.
I am rooted on 1.57 and have version 2 of GingerBlur. I wanted to set up a pattern and fingerprint recognition for my lock screen. I have the pattern setup so when I go to settings and click OK so enroll new fingerprints the phone sort of freezes. I tap back and home a bunch and after a couple of seconds it goes back. It won;t let me swipe my fingerprints though and add that to the lock screen. What do I do?
Unfortunately I have a similar probelm, I think. After updating to GB2.5 last night my fingerprint scanner has become totally unresponsive. I tried to re-enable it but don't really know how I would do that. When I go to set up a fingerprint scan it basically acts like I'm not swiping my finger.
Any and all help would be greatly appreciated.
Same problem; Atrix gingerblur 2.5 flashed from stock 1.26.
Did you guys ever find a solution to this? I'm having the same exact issue...
I had the same issue last week until I did a SBF flash to 1.87 and then re-flashed to gingerblur 3.5.
Hi guys,
I realized that the lockscreen is doing nothing in the sense of the security on the S2. I am using a lock pattern and sometimes when I get a text call, or press the sleep/wake button a couple times, I can unlock the screen without the pattern. Anyone else notice this?
I read about this a while ago, some bug with TouchWiz 4.0
security *FLAW* found...
Bascotie said:
Hi guys,
I realized that the lockscreen is doing nothing in the sense of the security on the S2. I am using a lock pattern and sometimes when I get a text call, or press the sleep/wake button a couple times, I can unlock the screen without the pattern. Anyone else notice this?
Click to expand...
Click to collapse
Yup, I noticed this also... on my 2nd day... I was *informed* that if I truly wanted to SECURE the phone 100% with PIN/PASSWORD/Pattern, I would have to choose LOCK immediately, otherwise, every other swipe the phone can be unlocked without it... EXACTLY like you experienced it.
Just change it to IMMEDIATE and you should be fine...
lonewolf69 said:
Yup, I noticed this also... on my 2nd day... I was *informed* that if I truly wanted to SECURE the phone 100% with PIN/PASSWORD/Pattern, I would have to choose LOCK immediately, otherwise, every other swipe the phone can be unlocked without it... EXACTLY like you experienced it.
Just change it to IMMEDIATE and you should be fine...
Click to expand...
Click to collapse
You want to set the Lock Timeout to Immediately (to clarify things) Located in Settings->Location and Security->Timeout
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
I think I have the same issue as you, but in case I don't I will post what I am seeing on my device.
In about the same frequency, say once in every 15 unlocks from phone sleeping, the screen will come on but will be completely unresponsive. Doesn't matter if it is swipe unlock or pin code etc, there is no response to touch input on the screen. In fact, I think the screen is just frozen or the operating system is causing the lock screen to hang.
If the lock screen is hanging, pressing power will:
(a) sometimes make the phone sleep again
(b) make the phone screen kind of glitch/blip and then it takes input again
(c) does nothing and the screen remains on and hung/frozen
Occasionally mashing both the volume key and power key will help fix it, but usually if it is completely stuck I have to do a hard reset (holding HOME+VOL UP+POWER and then selecting reboot from the menu).
Now - I think this could be an app, but not sure.
When I first got the phone, set it up with my Google account etc, it went ahead and downloaded ALL the apps I had installed on my previous phone (HTC Sensation running Android ICS). So if it is an app, it is having issues with this phone, not the OS, imo.
I uninstalled all those automatically downloaded apps, and used the phone for a bit without my normal stuff installed. Then started installing apps singularly.
I think it is either Facebook or Alarm Clock Xtreme. The latter makes more sense given it would be polling the system to find out when to go off, so it is doing more in the background I would expect than Facebook or any other non-system app.
Other apps I have installed/running:
Swiftkey X
3G watchdog
Dolphin Browser HD
ES File Explorer
Winamp (locks without this running or running at all in lock screen mode, so that is not the issue)
Real Calc
Google Drive
Facebook
Alarm Clock Xtreme
It is quite frustrating for a brand new phone to have these issues. Not sure if it is hardware related, and if it is, I want to find out soon so I can take it back to carrier within their 28day device swap RMA period.
Thoughts?
So others may try to help or identify the possible cause / fix .......
What is your firmware version?
Are you rooted, custom ROMs or Mods etc?
Stock ROM,Baseband : XXLE8. Build No :XXALE9.
But my screen responds after i press wake button again. You are right seems to be issue with the app. i will just compare your apps and below are the ones which are common between us.
Facebook
3G watchdog
Dolphin Browser HD --i never use
Google Drive
a fix that worked for me
Steps to the solution that worked for me (so far) were to uninstall:
1. Alarm Clock Extreme (no noticeable result but I wasn't needing that application anyway)
2. I had WIFI Fixer installed because of the problems I experienced with the WIFI connectivity on my Galaxy S3.
I disabled that application and problems seemed to go away for a time, but every so in a while they resurfaced. Much less often than before, though.
I was still stuck with my WIFI problem anyway, so I looked into solutions for that problem and since I could not find a workable solution I uninstalled Wifi Fixer and started tweaking my WIFI settings.
While doing that I noticed that disabling "Network Notification" under the Settings -> WIFI -> Advanced tab fixed both my problems.
Now I can't be 100% sure this solution works for all, but I am pretty sure the application that created the problem was "WIFI Fixer".
It's been more than 4 hours now without the "disabled unlock screen from hell", and I’m very happy.
LOOOL
Actually...
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
This is not a solution, this is a work-around....
It will remove the standby wifi.... My phone was at 0% battery in one night... But actually yes, the phone doesn't hang up when unlocking.
Someone who had replaced the phone could tell me if the problem is solved with a new one ?
calint said:
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
Click to expand...
Click to collapse
Sadly having the same issue! and only sing LG6 and LG8 of the UK firmware was release.. out the box was LG4 if I am not mistaken... have been putting off custom roms due to the fact stock one is so far good..
This fix seems to be working..Thanks! will live with battery drain as data is expensive in SA!
khan.dharvesh said:
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
Click to expand...
Click to collapse
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
It worked!!
douglasurbano said:
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
Click to expand...
Click to collapse
This worked for me!!! Thank you!! I was about to take a hammer to this phone! :good:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
RhavoX said:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
Click to expand...
Click to collapse
Not sure what ROM and kernel you are using, but at a big guess, try reflash another kernel or with less aggressive settings.
Sent from my GT-I9300 using xda premium
hey guys. I have a problem with my s3's lock screen similar to the described. whenever I press the power button to unlock, it takes 2 second for the screen to turn on. Anyone got any ideas on that?
Help! In trying to get my swipe lock screen to self-actvate when the screen turns off, I've managed to make the problem worse.
I made it PIN lock, intending to return to Swipe after testing. Now there are NO options for locking except PIN and no obvious way to clear it. I've read all kinds of suggestions, none of which worked. Surely this is not a "feature"?
Edit: Oh, duh. I can't believe this isn't documented somewhere. So you just go to the settings menu under Lock Screen and it says PIN. You touch that and it asks you to confirm your PIN. When you do you are presented with all the options again (including Swipe). Whew! Now if only the #%@#$ thing would engage when the screen turns off like it should!