hi, i just got done following this tutorial here http://ppc.stoleyour.net/xv6800/ after doing everything it said i rebooted. i have windows mobile 6.1 on now. but when i tried to make a call tell me to call this 88 number cant authenticate. after you sent the cab file to the phone what are you supposed to do with it?
thanks
ok, i called them they made me type in a 26 digit key. i click on the cab file before i did that as well. since in the info it didn't tell you what to do with it. didn't seem to do anything
Ok, since updating to the new flash and radio. the only things i see different is when i click on the Verizon Wireless icon it does nothing and when i click on unread messages it shows sms/mms, outlook E-mail and setup e-mail. i am fine with it just saying txt, sms and mms. how can i do this please?
thanks
Related
Not sure what the hell happened but I lost the ability to text. Everytime I try I get an prompt stating my text message can't be sent. I noticed in the account list that text message is no longer there. Once I realised that I tried to set it up like an email account but that didn't work either. Oddest thing is I can recieve them but it say unknown sender even though the sender is in my contacts. I've flashed back to 3.2.2 with no luck and even took it clear back to 3.0.4 but it didn't help.
Before anyone asks, yes I installed the carrier cab.
Try installing Arcsoft
What carrier do you use ?
Verizon..... I already have arcsoft installed
When you cook your rom, do you select a dialer? If so, what dialer do you select?
I'm receiving double text messages now on a lot of my text messages I receive. It doesn't seem to matter who the text message is from. It's happened after I upgraded the Radio, DCD ROM, and Bootloader to the latest versions below. I don't know if that's what caused it or if there is something wrong with the Verizon Service and I should call Verizon. Can anybody help me with this? Thank you!
Apota said:
I'm receiving double text messages now on a lot of my text messages I receive. It doesn't seem to matter who the text message is from. It's happened after I upgraded the Radio, DCD ROM, and Bootloader to the latest versions below. I don't know if that's what caused it or if there is something wrong with the Verizon Service and I should call Verizon. Can anybody help me with this? Thank you!
Click to expand...
Click to collapse
Must be you. I haven't had any problems. I would call them and see if it's on their end.
nitro66215 said:
Must be you. I haven't had any problems. I would call them and see if it's on their end.
Click to expand...
Click to collapse
It is definitely on their end...happens on Sprint to randomly....wont do a lot to call though as they don't have a clue as to why it happens,,,,,you will get the run around...."everything is fine on our end",,,lol
I know i have had this happen to me on alltel a couple times normally give it a couple days and the issue resolves itself no real point in calling CS they will just walk you through a bunch of stuff that have nothing to do with the issue
Are you using HTC home, by any chance? I've had this issue quite a few times before. I haven't had any dupe text messages after I uninstalled HTC Home - Just a thought.
No, but I'm using HTC Homeplug 1.12.0.0, but it was installed via the Kitchen, so I don't think it can be uninstalled. I guess I'll wait a week or so and if it keeps happening I'll contact Verizon if it does. Thanks.
BenjeeNy said:
Are you using HTC home, by any chance? I've had this issue quite a few times before. I haven't had any dupe text messages after I uninstalled HTC Home - Just a thought.
Click to expand...
Click to collapse
It's still happening but not as often as it was doing it. I complained to them a while ago about getting email notifications as a SMS everytime I got a new hotmail email message. I wonder if they did something while they were working on this complaint. The SMS was from OZMail wish is a Verizon applicaton for email that I used, but stopped using. Well, I guess I will call them and see what they say.
I have read and read and browsed and downloaded and typed and entered and so on!!!!! But none of the solutions or cabs seems to work for Erofich's Standard 6.1 1.1.7 version. I am on the Cingular/AT&T network. Does anyone have the fix? I can send MMS but cannot download.
Have the same problem but can download picture not audio files
jbogstartrek said:
I have read and read and browsed and downloaded and typed and entered and so on!!!!! But none of the solutions or cabs seems to work for Erofich's Standard 6.1 1.1.7 version. I am on the Cingular/AT&T network. Does anyone have the fix? I can send MMS but cannot download.
Click to expand...
Click to collapse
i have the settings if you want them. the cab files wouldnt work for me either. just pm me or just ask in the forum.
settings
they are also on the att website.
Yes, the settings on the ATT website WORK, but not completely. The MMS header will download, but you can't view any pictures. This must be a ROM issue - I've tried everything I can think of!
Finally resolved
This is one of those occasions where you are not sure what fixed it in the array of changes, but it worked, so don't argue with results.
I went in and cleared out all the settings that came by default with the 6.1 ROM. (Proxy, GPRS, MMS, etc.)
I then input by hand the settings on the AT&T website at:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=84238
Thank you Firewulf for the kind offer. I am curious to see what your settings are though.
I get alerts, I am able to send and receive all MMS messages as well as txt msg and Exchange Outlook email. No ERROR SYNCHRONIZING anymore!
Strange... my internet works (as well as all my internet enabled apps), texting works fine, but MMS is still a no-go! I don't get "error synchronizing" anymore... it just tries to send and always fails 5 minutes later! I have checked and re-checked the settings - I am running the latest WM 6.1 Standard ROM from this forum.
Help on MMS VZW; After I installed: Arcsoft Verizon MMS 5.0.69.44, a message comes up: "THis might not display because this is for an older version". I have tried to send a low res picture, and it bounces back saying "message delivery failed;or message recept failed" The person I sent it to, doesnt get the picture. I then tried GC Acrsoft MMS 5.031.25 & GC VZW Arcsoft MMS 5.0.70.24. Still no good, ”same messige delivery reject” any other ideas?
so not what you want to hear, but I spent the morning fighting with this exact issue... Finally just reflashed the ROM used PHM Registry hacker dn went to HKLM/software/arcsoft/arfcsoft mms ua/config/mm1/wspheader and added a new string X-VzW-MDN with the value of my 10 digit number. now it works.
I gave up and flashed scotts, mms worked, its also loaded. Thanks for your response
so... It seems I have gotten pretty good with this MMS not working thing... I have found that installing Caulkins Arcsoft fersion (I think its 69.43 or something....) and then dialling *228 option 1 to program your phone works pretty good. Im back to rocking Boreds stripper rom and loving it again. But now I found a winMo 6.5 rom that I wanna try....
hi all, to im new to this forum, in doing some of my own research i came across the questions on the MMS for VZW, have u tried changing anything in the servers, I was gettint the same exact message until I changed the server info, then it started working instantly give that one a try. However I am having a heck of a time trying to update the rom on my VZW tp, anyone have the time to walk me through it, thanks in advance.
Sabrina
MMS, MightyRom & Verizon
Ok, I have the MMS working on the phone. However the touchFlo interface does not support the new SMS/MMS. it no longer shows next messages on the interface. I have to go into the messages to see view any messages since the upgrade. is there a way to configure the touchflo to look at the mms update instead?
Quite a while ago, I flashed to DCD 3.2.6. After that, I noticed that I couldn't dial phone numbers from my contacts, but I could dial them directly. When I would dial using the contact, it would look like the call was going through, then I would get three error chimes and a message saying the call was disconnected.
Finally, I figured out that the difference is that in my contacts, the phone numbers all have "+1" before the number, i.e. "+1(206) 555-1212". This is the international prefix (http://en.wikipedia.org/wiki/List_of_international_call_prefixes#Syntax).
I assumed that this was a problem with DCD 3.2.6. However, I just flashed DCD 4.1.2, and the same issue is there. I suppose I could go through all 223 of my contacts and edit the phone numbers to get rid of the plus sign. However, this is the correct format for a number, and non-custom ROMs have worked fine with it.
Anyone got an idea of how to get the dialer with DCD 4.1.2 to work with these phone numbers? I'm guessing I just need to change some configuration relating to my International Prefix (U.S.) Alternatively, does anyone know of a ROM that does work with these phone numbers and also keeps the GPS and tethering (via Internet Sharing) working on my Verizon XV6800?
Thanks,
Jamie
Got it
Okay, I found it.
In the dialer application, go to "Menu", "Options...", "Services" tab, scroll down to "Plus Code Dialing". The rest is self-explanatory.
Hopefully, this will save someone else some time.
Jamie