Hi again:
Is there any patch to allow customizing the end call key just like you customize the answer key?
Say you are using blutooth headset, you open your mobile to dial a number and once you're engaged, you would want to close the flip and continue talking. Clearly call is cut !
samery
Related
I have got a LG-Optimus P-698 android phone. I request for following help.
1. Is there a software that will help me to attend my incoming calls without the need to slide the call attending (green) button? It sometimes requires two hands to attend an incoming call.
2. How do I access the last made call to recall this number. In other touch phones it I just press one of the buttons (usually the left corner button at the bottom), it will make a call to the last called or last missed call.
Thank you.
Is there any app out there that will auto-dial a digit (9 in my case) after answering an incoming call from a predefined phone number?
I have my condo's parking lot gate box configured to dial my android phone (rooted Atrix/CM7), but after I answer the call I have to take it out of my pocket, bring up the keypad and dial 9 to open the gate. This is quite inconvenient to do on my bike.
I found auto-answering apps and auto-dialing apps, but I don't have a problem answering it through Bluetooth, and I need to dial after an incoming call, not an outgoing one. I just want to be able to decide whether to open the gate or not using the answer and end buttons.
Thanks
Ever find this?
MaXKilleR said:
Is there any app out there that will auto-dial a digit (9 in my case) after answering an incoming call from a predefined phone number?
Click to expand...
Click to collapse
Did you ever find an app that does this?
This can easily be done with Tasker if your phone is rooted.
Create a profile for Phone Ringing, you can filter by number like *604*
The add tasks like:
Take Call
Wait 2 seconds
Type 9
hi,
i'm annoyed with two features that are missing in the native dialer on ICS.
1. While swapping calls it always asks for holding previous call or to end it. I can't simply switch to another call keeping on hold the other one.
2. If we type any number during call in the dialer, it just vanishes after the call ends! Its normally needed when you take down a number from someone to dial later
any workarounds?
chhapil said:
hi,
i'm annoyed with two features that are missing in the native dialer on ICS.
1. While swapping calls it always asks for holding previous call or to end it. I can't simply switch to another call keeping on hold the other one.
2. If we type any number during call in the dialer, it just vanishes after the call ends! Its normally needed when you take down a number from someone to dial later
any workarounds?
Click to expand...
Click to collapse
No workaround for 1.
But a suggestion for 2.:
When in a phone call, just push the Home button and open a note/text editor app.
Then make your notes for later use.
Continue your phone call ... multi-tasking !
On the Amazfit watches (including the Stratos), you can only Reject the call or Ignore the call.
Here is a very simple trick to change the Ignore Call action with Accept Call action.
You need TASKER (of course) installed on your smartphone:
- Create a new TASK called for instance "Accept call", Add action "Take the call" in the Category "Phone". (Sorry, my Tasker is in French and actions could be different in English)
- Create a new PROFILE, category "State", select Variable, Variable value, %SILENT ~ on
- Backward. A menu appears to select a Task. Select the task "Accept call" you have previously created
- Long press on the Variable value "%SILENT", a menu appears with Add (+), click on it
- Select "State", click on "Phone", (verify that it's Incoming type)
- Backward to Profiles
You need to set the sound of the smartphone to vibrations or ring but not to silent for both call and messages. The drawback is, if you select the silent mode by error, that the smartphone will automatically accept the call immediately.
If you want (like me) that your smartphone doesn't vibrate when a call or a message occur, you can set the vibrations to the minimum and create a vibration patern with Nothing (it's possible with my Samsung Galaxy)
Et voilà !!
I'm surprised that nobody is interestes by this post !
It's so usefull to accept the incoming calls just by pressing a button or the screen on the watch.
This trick is valid with all smartwatches proposing reject or ignore call.
pidobeuliou said:
I'm surprised that nobody is interestes by this post !
It's so usefull to accept the incoming calls just by pressing a button or the screen on the watch.
This trick is valid with all smartwatches proposing reject or ignore call.
Click to expand...
Click to collapse
For me even if accept incoming call from the watch I must take off the phone from the pocket to talk. So if I take off the phone I can accept call from the phone. If I answer the phone from a BT device I accept call from the BT device, so no need to accept from the watch. Different for an Huawei 2 watch or a Samsung S3 where I can accept the incoming call from the watch AND Answer to the call from the watch.
dersie said:
For me even if accept incoming call from the watch I must take off the phone from the pocket to talk. So if I take off the phone I can accept call from the phone. If I answer the phone from a BT device I accept call from the BT device, so no need to accept from the watch. Different for an Huawei 2 watch or a Samsung S3 where I can accept the incoming call from the watch AND Answer to the call from the watch.
Click to expand...
Click to collapse
Ok. But if your phone is in your jacket or a bag or placed somewhere in your house/car, and if you have a flip cover and finally if your network provider limits the ring time before going to voicemail, you will be happy to accept the call from your watch then get few seconds more to get your phone and speak directly without doing any additional button press/swipe on the phone screen.
The possibility to answer to the call from the watch (from the internal mic and loud speaker) seems to me useless except if your name is James, James Bond
I want to develop an app (with java not kotlin) to replace phone app like described at this medium page.
https://medium.com/makingtuenti/android-default-dialer-replacement-part-i-722d05ca50fe
I managed to write a java code that works as a phone app. It works for some basic functionalities such as answering a call, rejecting a call, hangup the call. But I failed to develop following features:
If screen is turned off, I can't manage to turn on the screen, when anyone calls.
Activate hands free (speaker) during a call
Mute the microphone during a call
I haven't tried to develop these functionalities:
Hold the call
Add another call (conference call)
Video call
Send key tone (DTMF) during a call
Is there any developer that can assist me how to develop these functionalities with java?
Thanks