I am reluctantly having to let my SPV M2000 go after many happy years. I thought I would give the enthusiasts a shout at it first before it hits the bay.
It is running WM6.1 build 5.2.20262 (flashed this week) . It only has a 256Mb card in it but has 2 batteries, 2 stylus, desktop dockingstation/charger, the hip carrier and the original headphones . It also has the original orange manual but that is mainly redundant as it only covers WM2003.
Screen is scratch free and case is practically mint, just below normal wear on the slide part of the case and a couple of very very small and unnoticeable
marks on the corners. Photos can be emailed to interested parties.
Oh yeah, it is unlocked to all but 3.
£75.00 + Postage (About £8.00 I think)
Will put it on the bay next weekend if no offers are forthcoming.
I am in the UK
Related
Hi all,
I want to upgrade and because of this I want to sell my XDA.
The PDA itself looks like it was always in it leather case (and has the typical marks of this case too)
I have a custom made handsfree for it, which actualy works but does look a bit strange
Further there is a GPS Mouse from Royaltek
The Cradle,
the original packaging
128mb ram sd card
original cd roms
a car loader
and some little pieces of this and that what I gathered of the years.
I replaced the battery about a year ago and for the last year I hardly ever used it.
The screen is ok...as far as I can see no real scratches
Make a fair price and we can make a deal. I have paypal and also a German adress and a good name to loose, so no worries. Delivery would be by Postal service.
Lets work something out.
Cheers
H
Original box and accessories (except for the spare styluses (stylii?) - last one remaining).
ROM version is 3.17.03 from the xda-developers' ROM kitchen, but you're free to cook your own and load whatever the Wallaby can take!
I used it on the O2 network (in the UK). I don't know what it might take to use it on another network. I never felt the need to unlock it.
It's all working. The case has some marks but nothing serious. The screen has had protective covers from day 1, so is unmarked (except for some residual sticky around the edges but you can probably clean that off. I didn't like to try for fear of damaging the surface).
I was so happy with this XDA that I 'upgraded' to the Wizard. Now I miss the extra screen space, but I can't do without BlueTooth and WiFi.
I'm open to offers. If it doesn't go to an enthusiast here it'll go to the big market on ebay.
tell me the price...
tell me the price
thanks,tell me the price
hello,
just need some opinions about car holders. first one CU S240 holder for topaz
http://www.handy-heaven.de/shop/images/b178412.jpg and second one is universal htc holder CU G100 http://www.1a-handyshop.de/images/artikel/HTC-CU-G100.jpg
which one prefer you guys? im still hesitating.
I wouldn't go for either. Brodit are the best. There is no fiddling with plugs with that, you just slide it in and it is charging....
Alternatively see here: http://forum.xda-developers.com/showthread.php?t=564493
i bought one like the one in first link with charger for about 10$ on ebay,
the handle (long part) broke immediately, so luckily the plastic that holds the phone itself is disconnectable and fits HR and i had HR handle from my old phone so the combination works but for itself its piece of crap.
too bad HR dont make holder for topaz - simple & rock solid - mine works for 2 years now with several phones.
about the universal ones i tried couple and its never perfect...
Look at brodit. Costly but the best available. The one for Diamond can be sued for Diamond 2
I just purchased this (spendy $59) one from ProClip...
http://www.proclipusa.com/brodit-device-holder/htc-touch-diamond-2-(gsm)/charging-holder-with-tilt-swivel-and-cigarette-lighter-adapter-512011-17511.aspx
It's on backorder now, but should be here within a week. I'll let you know how I like it.
[edit: It's by Brodit... didn't realize that.]
I was thinking of going for the CS240 as well, some site have it around £20
http://www.mobilefun.co.uk/htc-touch-diamond2-car-upgrade-kit-cu-s240-p18997.htm
Most HTC originals I have bought are great quality.
That said I also spotted these Herbert Richter, any tried them ?
http://www.handtec.co.uk/product.php/2417/herbert-richter-htc-touch-diamond-2-jacket-grip
I like the idea of multiple attachements, for the bike, car, etc...
Anyone bought and tried either of these, the Brodkit ones looks too bulky and over priced (to me).
The CS240 is great quality. It is actually made by Herbert Richter in Germany and the jacket grip of the second link you supplied is part of the CS240 set. So I think the set is the best bargain. It has a very good build quality. Nothing waggles during driving.
There is one drawback. The jacket grip may scratch the shiny surface of the battery cover, but if the TD2 is used without a case its probably scratched anyway.
I bought something that looks like your second link. And let me tell you, that was the cheapest piece of Chinese crap I have ever bought. The sides the open and close to grip the phone were getting jammed, the became loose and phone would fall. In two month it had been broken.
Nomas mis dos centabos.
I just bought this one
link not allowed
waiting for it to arrive ......
as new user not allowed yet to provide links
try the web for dealextreme dot com and look for sku 23237
Have you thought about the parrot branded car kits.
The blue tooth works really well and I have had for a long time and it never let me down.
I got mine from cleverkit.com
I ordered a 3 pack of these bad boys from amazon; $13 shipped for 3 is much better than boxwave's $16 shipped for one...now we need to see if they fit properly!
http://www.amazon.com/Fosmon®-Premium-Quality-T-Mobile-Ballpoint/dp/B003752IWI
I will report back once they arrive =)
Can't guarantee those will, but I CAN guarantee that these will. The ORA Stylus from Expansys-USA and for less than $12 (sans shipping).
Boxwave tried to poo-poo these when I asked how come a single boxwave pen/stylus cost as much as a three-pack of these.
I have the three-pack for my Sprint Touch Pro2. First batch were defective, and even before I said anything Expansys-USA admitted they had sent me defective ones and replaced them.
Never an issue since.
Please write back and say if these fit your Sprint (CDMA) Touch Pro2 and how well they work. Always need new styli.
Did you recieve the stylus yet???
Is it a PERFECT fit?
whoisloon said:
Did you recieve the stylus yet???
Is it a PERFECT fit?
Click to expand...
Click to collapse
I bought a 3 pack. Yes, they fit just like the originals. They are very slightly different when inserted, but it is not noticeable. They work just like the OEM; when I remove the stylus the device unlocks.
yup they fit Tmobile tp2 perfectly and for roughly $4 delivered each boxwave can suck it sideways!
any pics of how they fit externally? you said there is a minimal difference with the OEM stylus..
fosmon fits tp2 just fine
i finally got my 3 pack today. took 2 weeks as the first shipment to me was lost. In short these guys are exactly the same length as the original however the steel barrel is of a smaller diameter. Looks like they simply used a high quality pen cartridge and cut it down to fit, then added the plastic tips at both ends. 3 for $14 I cant *****. I would recom recommend.
Will this stylus fit AT&T Tilt2? Probably it will, just want to be sure
I bought these from Expansys USA and they fit like a charm. Even before I was able to complain that the pens weren't working, I received an email from Expansys USA that they had sent me defective pens and replaced them with no questions asked.
Stylus fits fine. It's a great thing to have a pen when you need one.
Thanks! Needed to know this. Just bought a stylus for my Tmobile TP2, but it was the sprint branded one...lets just say I had to "modify" it to make it work. Now I can get three that look right for less than the $21 shipped that HTC charges for their 3 pack!
Wow, awesome find! Just ordered mine, can't wait...!
Fits my VzW TP2, but...
The Fosman metal stylus fit my VzW TP2, but it initially caused some weird behavior. I have stylus lock engaged so my device will not wake up, etc., with stylus. The device ignored the lock with the Fosman stylus! Finally got it working by unloading and reloading device lock.
Worse still, the ink dried up after only a couple of weeks and literally less than 20 words written. Since that was the only reason to go with the Fosman, I have gone back to the OEM stylus. (Yes, I know I got a 3-pack, but what good is a pen that dries up after a couple of uses?) I should have thought about it -- look how small the barrel is for any ink reservoir ...
Where'd you buy it?
Bully Dawg said:
The Fosman metal stylus fit my VzW TP2, but it initially caused some weird behavior. I have stylus lock engaged so my device will not wake up, etc., with stylus. The device ignored the lock with the Fosman stylus! Finally got it working by unloading and reloading device lock.
Worse still, the ink dried up after only a couple of weeks and literally less than 20 words written. Since that was the only reason to go with the Fosman, I have gone back to the OEM stylus. (Yes, I know I got a 3-pack, but what good is a pen that dries up after a couple of uses?) I should have thought about it -- look how small the barrel is for any ink reservoir ...
Click to expand...
Click to collapse
I bought mine at Expansys-USA and they replaced it saying that they had shipped me a defective set. No questions asked and the new set don't dry up.
I got that same pack on Amazon for 9.99 + 3 for shipping the fit and work great.
http://www.amazon.com/Fosmon®-Premium-Quality-T-Mobile-Ballpoint/dp/B003752IWI
You can also order them from tmobile's site for 9.99 + 6 shipping and taxes.
http://www.t-mobile.com/shop/addons/Accessories/Default.aspx?categorycode=24
Do they fit in the tilt 2?
Just got mine in from Amazon.com for 9.99 + 3 for shipping as well. They fit great and still work w/ stylus sensor and writes well. We'll see how long the ink lasts...
anyone know where i could buy a stylus with ball point for the normal touch pro2 on ebay? because hard to purchase when in in Australia. Thanks
I made my own out of a htc stylus some melted plastic a file and a black paint marker. I just ordered the fosmon one thanx everyone for letting me know this one works.
i'm going to whine... so if you're in no mood for it- stop reading now...
-------------------------------------------------------------------
why does a 39 USD case cost 95 USD in germany? (or 105 for israel?!?!)
I need a case for the device, and the one case that gives pockets and a workable solution is fast asleep selling to one (large and fat) market- the US
I've gone through 4 of the 9 resellers, it's like they dont even bother.
It's double and triple prices abroad- and if you dont like it- tough.
come on... the UK is inside of the EU, that will bring taxes down... and the people there even speak ENGLISH, so business wont be a total bummer...
How about a small distribution center in HK? global free shipping? (i'm sure dealextreme will stock your case, and sell a couple thousand of them)
sometimes i wish i'd work in the entertaiment retail
How to do it
Bought y RoosCase via Amazon.
Shipped to friend in USA.
He put it in the mail and 2 weeks later it is here.
It does double shipping but there is no customs on that kind of ithem.
I bought the minimalist case. Will post a review is a few days.
No pockets and less protection but only 6 oz to add to the weight.
Shofar
I got this one for the HP at Amazon, but it fits perfectly, has a pocket, and was inexpensive. Any chance a friend could get it for you and mail it?
HP WV594AA 10.2 Inch Mini Sleeve
And this one that has strap and pockets
STM Bags Jacket Large
What kind of case are you looking for?
I got a hardcover named "bulletproof coolbananas" from amazon.de.
Normally for Netbooks, but protects good with one pocket outside
and shoulderstrap.