Hi frnds
my G4 was working fine but once while accessing GPRS it go hang so i restart my device but only boot loader mode.. i try many rom but G4 dint repair then i use hard spl and flash with
here is detail for my G4 "WM5_AKU3.3_Crossbow_BETA" then my G4 alive but only one problem now i've main battery didnt get charge with original charger its how in power status "main battery unknown" so i try my frnds battery but same problem my battery working fine in his G4, how to solve this problem before flashing my phone all working fine.
i also try "Xion_WM_6.1_GER_v0.4" but same problem can any one help to solve this problem "Main Battery Unknown"
here is the detail for my G4
Code:
=> Bootloaders:
IPL: 2.16.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.47.21
Protocol: 4.1.13.24
=>Extended_ROM:
Version: 2.20.7.114
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
cfb7d682 - 489.37M (0x1e95ee00)
ae9dc342 - 9.99M (0x9fd800)
4ea9a13a - 43.24M (0x2b3e000)
4fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000da1e0107253302510104061f
Key Index: 23
Get another Radio ROM and flash it, it should solve your problem.
starkwong said:
Get another Radio ROM and flash it, it should solve your problem.
Click to expand...
Click to collapse
thnx bro..
if u i'll try and post the result here
i have same problem.i flashed it.But same problem continue...
Please check battery pins in your PDA, may be dusty or wrong or deflected
Related
I want to install Windows Mobile 6 Professional on my imate K-JAM. its details are mentioned as under:
Received Info Via:
Wizard Service Tool v4.2.1
Device Info:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ce9df3ca - 5.00M (0x4fec00)
2ea9d13a - 48.23M (0x303c000)
4fb25f92 - 50.95M (0x32f4000)
6fb25f3e - 2.94M (0x2f0000)
cfb25fb6 - 3.06M (0x30fc00)
All Done.
I have tried a lot with different ROMs but ...i just wana weep .....i dono wat the hell is happening with all this....
some times wen the installation completes and everything looks fine as with Wizard_Love_2.26.10.2_WWE_Novii_CF2 it worked fine but when i checked the version of WM it says its same as before WM5. sometimes it completes the installation with e.g Xplore_1.1 but at the time of reboot it shoes bootloader screen (try color screen). then i re-install the original WM5 ROM and get my device back in action from that BRICKED HELL.
please help me out and tell me the right path to go on...
1- is it possible to upgrade this device to WM6?
2- if yes then what are the exact files and exact method to do all that?
3- I NEED IT URGENTLY.... I MEAN THE ANSWER.?
thnx and regards,
Yawar
oh one thing more i have checked the CID lock the answer is:
SPL version is 2.26.0001
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Now Tell Me Wat to do????
http://forum.xda-developers.com/showthread.php?t=362648
Hi.
here is the detail of my G4 when it is working fine
Code:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 35638400**********
=> Bootloaders:
IPL: 2.16.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.47.21
Protocol: 4.1.13.24
=>Extended_ROM:
Version: 2.20.7.114
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
cfb7d682 - 489.37M (0x1e95ee00)
ae9dc342 - 9.99M (0x9fd800)
4ea9a13a - 43.24M (0x2b3e000)
4fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000da1e0107253302510104061f
Key Index: 23
but it show unknown main battery so i flashed it with spl 3.08
now it show only
IPL 2.16.0001
SPL 3.08
i flashed it with many other roms but not ableto repair my G4 can anyone tell me how to solve my problem..
thanx
you have flashed it with a g3 spl and now you are screwed, your ipl is g4 your spl is g3 , thats not good. I doubt you can repair it yourself. I dont know of any remedy to this except sending back to the manufacturer
Very Very true what scousemartin has said,there's no remedy,its a Gonner!
Bad luck!
this problems comes form my stupid mistake....
but it happen due to spl 3.08 g3(s/w) flashing so may be there is some ways to repair if anyone know let me know..
i was **** by myself..
thnx
are you still able to power on your device and get to bootloader to allow flashing? find a rom that contains g4 ipl and spl flash that, its worth a shot if you can stil flash.
Hello
any other ideas in how to repair this problem?
I just grab a Wizard 100 from a friend that was playing with a new ROM an now is in the RGB screen and the IPL is 2.21.001 SPL 2.28.001.
When it power on you can seen the Wizard Love screen and then it goes to the RGB screen again.
I tried to run the Wizard Love ROM again but it do the same.
Thanks for the help or if any can refer to another threat.
Download and flash official stock rom to recover.
Deleted double post !
Hello,
i've bought this device from somebody. There is already another rom installed.
But i like to install another one.
I've lookt already in allot of post but it's always for installing from a original rom.
Are their any special things i have to do?
I've been looking also for programs for vista. i've found some but i cant run them.
Now i've reinstalled xp. What programs do you recommend to me to instal a new rom. and what are the specifiek steps i have to pass.
Thx for the help
ipl 2.21.0001
spl 2.21.0lip
ps. my english isn't verry good
Which rom is running at present,is it official wm5 or custom build wm6 ?
download WST_4.2.2 tool and run 'Device Info' and 'CID Action' button to get the vital data of the phone and post it here.
Wizard Service Tool v4.2.2
07/09/08 09:11:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008658161
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
Registry AKU: .1.0.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: AMP_Vanilla
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5152 - 9.99M (0x9fd800)
6eae2902 - 43.24M (0x2b3e000)
efb26b52 - 50.13M (0x3220000)
efb26982 - 3.06M (0x310000)
efb2692e - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000170501010c1f0fb115030696
Key Index: 25
All Done.
Reading CID block...
Calculating CID block sum...
CID checksum: 77D29C2F
Decrypted stored sum: C46E0673CB3C0C58
Decrypted calcd sum: C46E0673CB3C0C58
Key index : 25 - Block index: 146
CIDkey: 2BßO©Ö
CID IMEI: 3
CID: WIZQTK01
Phone is CID LOCKED!
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
Grrrrrr8 !!!
Your phone is already 'HardSPL',there's no need to do any other procedure,just download any wm6 or wm6.1 latest custom built rom,hook up the phone with pc via usb cable and run the downloaded rom,it'll start to flash,let it complete 100%,the phone'll reboot and load the newer rom.
Don't ever flash any official,as your phone is HardSPL,it'll get Bricked,coz official roms contain IPL/SPL in them,ok
Hello Gentlemen,
I need some help. I'm new and not quite aware of.....
My charger burn up while charging and now my Qtek9100 is SIM locked and has no sound also.
I have made Hard SPL on my device..
Below is the info form my device....
Wizard Service Tool v4.2.2
05/12/08 22:25:57
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356382003053545
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
efb7d5ea - 1.87G (0x779e0200)
0e9df312 - 5.00M (0x4fec00)
2ea9d13a - 48.23M (0x303c000)
afb25f92 - 50.95M (0x32f4000)
6fb25f3e - 2.94M (0x2f0000)
6fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000002d3a0205211214d2060606c7
Key Index: 80
All Done.
My phone is dead.... The sim is locked (invalid SIM) and there is no sound also....
When I plug my new charger there is no orange light, the light is RED and the device refuse to start....
I need to start my device first then plug the charger but no light is showing while charging...
The orange light is gone...
Please let me know if this is a hardware problem or I just need to flash new ROM....
Please advice...
Thank you....
The battery is completely dead or has seen its days.
If its dead,it can only be charged with a wall charger which can give an output of 1 amp,or you can try the 'Jump Start' trick, but if its gonner,get a new battery.
i got wiza200 wid stuck at startup window.i m new wid wiza i searched in this forum and found out the rom(Wizard_Love_2.26.10.2_WWE_Novii_CF2) and tried to upload, uploading started and at 96% it gave error302
as rom not in english thrfor i cant understand this error,after that my wiza wid blinking three colour screen and not conected wid pc and and now it shows just white blink on screen.
wats the problem and wats its solution.i m in trouble plz any body help.is it now complete dead r programble ?i read its info unsing wizatool
Wizard Service Tool v4.2.2
04/04/09 16:40:22
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004203020
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.18
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9e5266 - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
afb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000008a0801090c1802930605067f
Key Index: 33
All Done.
i also got its bacup
WST_20090404-1642_IPL.fls
WST_20090404-1643_(auCID.fls
WST_20090404-1643_(auEXTROM.fls
WST_20090404-1643_(auGSMCAL.fls
WST_20090404-1643_(auHTC_Logo.fls
WST_20090404-1643_(auIPL.fls
WST_20090404-1643_(auOS.fls
WST_20090404-1643_(auSPL.fls
WST_20090404-1643_(auUA.fls
on wiza200
jamroz said:
i got wiza200 wid stuck at startup window.i m new wid wiza i searched in this forum and found out the rom(Wizard_Love_2.26.10.2_WWE_Novii_CF2) and tried to upload, uploading started and at 96% it gave error302
as rom not in english thrfor i cant understand this error,after that my wiza wid blinking three colour screen and not conected wid pc and and now it shows just white blink on screen.
wats the problem and wats its solution.i m in trouble plz any body help.is it now complete dead r programble ?i read its info unsing wizatool
Wizard Service Tool v4.2.2
04/04/09 16:40:22
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004203020
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.18
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9e5266 - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
afb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000008a0801090c1802930605067f
Key Index: 33
All Done.
i also got its bacup
WST_20090404-1642_IPL.fls
WST_20090404-1643_(auCID.fls
WST_20090404-1643_(auEXTROM.fls
WST_20090404-1643_(auGSMCAL.fls
WST_20090404-1643_(auHTC_Logo.fls
WST_20090404-1643_(auIPL.fls
WST_20090404-1643_(auOS.fls
WST_20090404-1643_(auSPL.fls
WST_20090404-1643_(auUA.fls
Click to expand...
Click to collapse
1st Your device is not UNLOCKED, you have to unlock before apply a new ROM
2nd Perhaps the tool is the old version and thats why you couldnt flashe the new ROM. (if so, try a different version of the RUU, i think i saw one on a CRACING thread) and now i dont remember the ERROR you mentioned above.
Good luck
i tryd to unlocked it wid wiza tool but it says ur device is already unlocked.
any other help plz