I have a Touch Dual and I am trying to do the ROM upgrade.
All connected, manage to go through the 2 wizard screens then hit upgrade, the bar stays on 0%, as does the phone then I get failed. I can reboot the phone and it's back to where it was.
I am running the upgrade on a Vista 64Bit machines
Any thoughts?
Related
I have flashed my device many times, and I am trying to test out no2chem's rom. I currently have flashed dcd's 6.1 rom, and whenever I run the RUU, as soon as my ppc hits the boot screen it says USB and then I get a message on my windows xp machine that the device is not recognized. Then it disconnects and I am stuck. Anyone experience this? I have rebooted, etc...many times.
(moved from titan forum)
This phone will not boot anymore at all and I need to return it for a replacement. I am just trying to get it back to factory default for Sprint.
It has SPL-2.47No2chem bootloader and I can't run the TitanRelocker because the phone will not boot.
I just tried putting it into tri-color screen and running TitanRelocker.exe through usb
result: No device connected - would you like to try copying again
Tried extracting TitanRelocker.exe and running ROMUpdateUtility.exe through usb
result: status bar updates on PC and phone, phone restarts into tri-color and still shows SPL-2.47No2chem
Tried copying StockSPL_1.06_RUU_signed.nbh onto sd card
result: status bar updates on phone, Update success. When I restart the phone it shows Nuekernal-3.01, launches into RM splash and hangs. Going into tri-color still shows SPL-2.47No2chem
Tried to load nueROM_MTitan-201-201-spackr through usb
result: Update success. When I restart the phone it shows Nuekernal-3.01, launches RM splash, then nueROM 3 screen appears and hangs at 44519ms, 60679ms (sysintr_bt_disable) or various ms
I have tried to get this phone working in so many ways I'm beginning to think it has a hardware problem. I have tried so many hard resets, various radios (currently 3.42.50) and roms and read so many posts I'm getting brain lock.
More troubleshooting while waiting:
Tried some steps suggested by Ryan Mogul in another thread
# Flash the Stock Sprint ROM from my Unlock Tools Directory and let it run its Auto Cust.
(I had to use the SD card method for this because of 'Image error. Please check image" using the RUU method.)
# Do NOT interrupt it let it finish and reboot,
* (must reset manually using the SD card method) and everything. It will replace your current EXT ROM with contents that never harm anyone. (never happened - wouldn't boot)
* Used SD card to install Special_4350.nbh - still wouldn't boot, now black screen only - multiple resets - error: 'No Radio'
* Used SD Card to install radio - which one? wiki says Radio 1.40.00
* CDMA updated - soft reset - won't boot - 3 resets - radio now 1.40 - hangs at htc screen
* trying tri-color usb RUU update to stock ROM 3.35 - Still have SPL-2.47no2chem - 'Image error. Please check image" again
* trying SD card method for stock 3.35 ROM - 'No Radio' error - wait... booting... hang at Windows Mobile screen 2 minutes... 'tap screen' appears... customizing running PPST, IOTA etc (replacing EXT ROM?)... resetting... booting... press Start... hang - lockup
* Reset - radio now 3.35.04 - hang at Windows 3 minutes - lockup
* Remove battery 30 seconds - replace battery - push power - Win Mobile screen - startup sound... hang 3 minutes - lockup
* try a hard reset - why? I have no idea - hang at win screen - no sound - lockup
Don't know what to do next. I still have SPL-2.47no2chem and no way to remove it. I really don't want to take it back to Sprint this way.
Sprint
SPL-2.47No2chem build 109
Radio now 3.35.04
ROM RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship
Can anyone point out what I am doing wrong? Have I posted enough info?
Any help at all would really be appreciated.
Thanks!!!
- Andy
So what happens when you turn the phone on currently.
It was booting and running for random periods of time before locking up. I was able to keep it running long enough to run nueSPLTitanRelocker-100-2.07-pack. Now it boots to a black screen but at least it has SPL-2.07.0000. Wow - what a week!
Not sure what to do now - I guess just take it back to the store.
The phone wouldn't even finish a hard reset at the store. Ther're sending me another phone. Must be bad memory or something. At least posting everything I did here helped me straighten out what the heck was happening. Thanks Drew and everyone else who took time to look at this.
Case Closed: Bad Harware
Hi,
This is my problem, I have a X7501 running Windows Mobile 6.5 Cooked by MichyPrima. The current Rom I have is this; "Athena_SPL1.2_R1_CE_B21500_MiChY"
The problem with this version is that every time I do a soft reset, all or more of the programs that I installed get deleted and I have to reinstalled them again.
So, I decided to upgrade my pda to this version
"Athena_SPL3.5_R1_CE_B21500_MiChY"
In order to this I just simple need to flash the above file in my x7501 and here is when the problem starts,
I run the "RaphaelCustomRUU" that comes with the rom, I follow all the prompts and when the instalation start (0%) the pda auto-restart, the connection get lost and the installer simple stops.
I tried to install another version "28205_1_04RVGA" but happens exactly the same, I tried to update my Radio, and the same.
It looks like something is making my Pda to restart and doesn't allow the installation to continue. I also follow the steps from 1 to 10 of this file "AP4_How_To_1.8" to try to fix any problems with my device and nothing.
Battery is 100%
antivirus is off
PDA Sync perfectly
PDA works properly except when soft reset
Does any one has any idea why the auto restart is happening???
Thanks in advance
sovius
Hi I also have a similar problem:
I was running SPL3.5 & AP4 on an Athena X7500 previously but making a hash of the new/old roms to install, i flashed AP Touch by PK.
I am now unable to get into windows mobile's Today screen as the customisation process which runs config & AP Touch.tsk keeps resetting the device. Each attempt i flash (i tried multiple ROMs, ranging from AP Touch again, AP3newSPL, and AP4.0 again) results in an error asking me to check my USB connection to the device. I suspect its because i do not have enablerapi anymore inside the device. I am unable to install enablerapi into the device since it keeps resetting! deleting files from the startup folder to try stopping the customisation / reset process also didn't quite work, neither does it allow me to delete the AP Touch.tsk file inside the device.
Can anyone help??
Well, after a lot of research and luck I have finally resolved my problem.
and here is how I did it.
As you know my device every time I try to flash it from the computer, didn't response and simple cut the connection. I tried to flash it from the SD card and nothing, so.
1) look for the rom you want to flash, in my case was "Athena_SPL3.5_R1_CE_B21500_MiChY". Note; you can go from SPL 1.2 to 3.5 but for some reason I couldn't go from 3.5 to 1.2 or earliest.
2) I put my Athena in bootloader mode, by pressing camera + Comm Manager + reset
3) the colored screen appears saying on the white area (serial). why, I'm assuming my device was waiting for a serial connection or something
4) and here is the luck, I connect my USB cable to my device and the word serial changed to USB.
5) I activated the RaphaelCustomRUU.exe with the "Athena_SPL3.5_R1_CE_B21500_MiChY" rom inside and follow the prompts
6) the installation for the first time in more than 6 months finally start and satisfactorily was completed as well.
done
I'm checking if everything is okay, but so far, everything cool,
Hope this is helpful to those who face the same problem.
cheers
Sovius
Hi ,sorry noone saw your post but it would have been obvious what your problem was.
There is a way to downgrade to SPL 1.2 and it is in the stickies.
Just for reference if anyone finds this thread, you should have gone into bootloader to check your SPL and then made sure your ROM matched this.
The mismatch was the problem that caused the endless reboot.
regards lakeman
Thanks for your replay.
but I'd like to mention, that I was not trying to downgrade my SPL, in fact I was trying to Upgrade from 1.2 to 3.5. But that is not the issue.
My problem was that no matter what installer I used, after follow all prompts, the installation process freezed at 0%. Everytime I connected my PDA, everything looks alright until the installation process started and nothing always 0%.
So the solution was to put my PDA in bootload mode and only when the coloured screen appears, only at this point I connect my USB and double click the RaphaelCustomRUU.exe with the desired OS. My PDA instantly recognized the connection and did the installation.
Cheers
I have installed Android OS (energize) on my HD2 and was wondering if someone knew how I could get an icon for windows in the list so I can switch back and forth os instead of rebooting the phone every time??
you cant switch, when you boot to android it (almost) kills windows. It isn't running in the background, or at least not in a way that would let you switch to it and run apps.
(or at least thats my understanding of haret.)
You can't switch "back and forth". Windows isn't running so you have to reboot the phone in order to start it.
Hi guys,
I was trying to upgrade to Android 2.3 on my Sharp Softbank 005SH but the phone got stuck in the Major Update screen and I don't know what to do now. Anyone with experience please help!
The phone is updated to the latest firmware that is required for this major update, Build No. S0900.
So, I decided to go for the PC upgrade option, Downloaded the driver and the Update tool, waited for many hours for the download to complete, then started the procedure.
I then switched the phone to Fast File Transfer USB mode, checked for update, it discovered that an update was available and asked me to restart the phone.
After restarting, I ran the Update tool but it gets stuck at the screen where it checks if the phone is connected in the above USB mode.
Meanwhile, the phone won't reboot in normal mode. If I pull the USB cable out, it says "Update failed. After a reboot the phone will work again." Well, it doesn't because I can't reboot. Even tried removing the battery for a couple of minutes...
same to you
just update my dm009sh from s0300.....failed
guaiwujia said:
same to you
just update my dm009sh from s0300.....failed
Click to expand...
Click to collapse
I've sent my phone back to Japan. Hopefully, they'll fix it there soon.
Obviously, the problem occurs because the phone and/or the OS are not in Japanese.