Related
Sorry if this is a dumb Question but I have not been able to find a true answer.
What is the advantage of updating My Radio Rom from 1.20 to either 1.27 or 1.35 or should I leave well enough alone.
Its up to you, the 1.35.00.11 version of the radio has the GPS chip enabled, but as you will see in the GPS thread the GPS chip works but has no antenna. The radio should be more stable, and i noticed an increase in the range of my 3G area with it. Make sure to use the version available here (at the top) because they push "des SSPL" to the phone so you dont need to worry about which bootloader or CID you have (not that it matters about CID with radio upgrades...but you know what i mean )
Thanks, i'll probably upgrade to 1.35 using the link you provided
Just upgraded, very straightforward.
One slight issue. After upgrade and soft reset I could not make a data connection.
I made a voice call just to check that was working . . .
then all was OK.
Don't know if the voice call sorted it or what
just make sure you have GPS off or your battery will be in for a ride
kassper said:
just make sure you have GPS off or your battery will be in for a ride
Click to expand...
Click to collapse
Hi,
I also flashed 1.35 nice and easy. So where can you turn GPS off ?
Thanks for the help
char05
Don't worry, GPS isn't enabled unless you install the VRSerial driver (which aint easy....). Even then, it's only turned on when an application specifically opens the GPS comm port.
Sleuth255 said:
Don't worry, GPS isn't enabled unless you install the VRSerial driver (which aint easy....). Even then, it's only turned on when an application specifically opens the GPS comm port.
Click to expand...
Click to collapse
Hi Sleuth255,
thanks for the help on this issue. I do not indent to install VRSerial. I do have an external GPS mouse which is fine for me.
Greets
char05
I recently upgraded and it was a major improvement for me. Far fewer dropped calls, better reception, etc.
I have noticed a noticeable decrease in in-call volume...is this an issue with this rom? At max volume, I have trouble hearing in a noisey environment...never had this problem before.
RUU_1.35.00.11_radio_only.exe wants to connect to the internet?
I upgraded my radio rom yesterday and kept the installation file, RUU_1.35.00.11_radio_only.exe, on my laptop. I downloaded the file with the link supplied in the wiki page.
Now today I get a warning from my f-secure saying that the exe file “RUU_1.35.00.11_radio_only.exe” wants to connect to the internet. I clicked deny and it kept trying to connect four more times then it stopped. I scanned the file for viruses and Trojans but F-Secure didn’t find any.
Anyone else had the same problem or perhaps knows whats going on?
ricott said:
I upgraded my radio rom yesterday and kept the installation file, RUU_1.35.00.11_radio_only.exe, on my laptop. I downloaded the file with the link supplied in the wiki page.
Now today I get a warning from my f-secure saying that the exe file “RUU_1.35.00.11_radio_only.exe” wants to connect to the internet. I clicked deny and it kept trying to connect four more times then it stopped. I scanned the file for viruses and Trojans but F-Secure didn’t find any.
Anyone else had the same problem or perhaps knows whats going on?
Click to expand...
Click to collapse
its probably thinking that access to the ActiveSync device (which as far as i am aware is via tcp over usb) i wouldnt worry about it. disconnect from the internet if you are.
Hi,
HOUSTON WE HAVE A PROBLEM!!!
After install this radio version, my phone want to start...
WiFi is ok
BT is ok
But the phone remain in of, even i restart it using the wireless manager...
Some suggestion?
Tanks
load up dotFred's taskmanager and see if the RIL service has started.
@ricott:
I built that RUU with an unregistered copy of WinRAR. Maybe it's phoning home for some reason....
vulkanxxv said:
Hi,
HOUSTON WE HAVE A PROBLEM!!!
After install this radio version, my phone want to start...
WiFi is ok
BT is ok
But the phone remain in of, even i restart it using the wireless manager...
Some suggestion?
Tanks
Click to expand...
Click to collapse
Issue resolved!
If the phone won't start, after flashing radio 1.35, simply reflash the SO.
mrvanx said:
Its up to you, the 1.35.00.11 version of the radio has the GPS chip enabled, but as you will see in the GPS thread the GPS chip works but has no antenna. The radio should be more stable, and i noticed an increase in the range of my 3G area with it. Make sure to use the version available here (at the top) because they push "des SSPL" to the phone so you dont need to worry about which bootloader or CID you have (not that it matters about CID with radio upgrades...but you know what i mean )
Click to expand...
Click to collapse
Did you upgrade from 1.34.00.10 or a lower version radio ?
Would like to know if there is any "real" advantage to upgrade from 1.34.00.10 to 1.35.00.11 ?
I am experiencing some missed calls due to the always GPRS / 3G connection I am running for emoze push mail.
I know this is not supposed to be able to happen, but on two occasions today and since upgrading to new radio and DCD 3.0 my wifi has turned on and detected networks with the wifi switch set to off, not sure why this is happening and I can not duplicate it on demand, trying to turn on wifi with the switch of via comm manager still does not work. Trying to find some kind of pattern but it has only happened twice.
Perhaps with the new radio there is a way to turn it on and off via software, or perhaps my switch is malfuntioning.
I had a similar experience as well.
I noticed it when I soft reset (not all the time, but 1/10 maybe?) and when trying to activesync, it would sometimes turn on.
I wish there was a way to figure it out, this means that it should be possible turn on wifi via software doesn't it?
Now that you mention it one of the times it came on was right after a soft reset.
Yep, this is becoming a well known problem.....well, for me not a big problem, just a slight annoyance....in the new ROM/Radio. It must have something to do with the radio, because I never experienced this in any other ROM. I'm wondering if WLAN may be turning on when there are short lapses in carrier coverage, and when an app (like activesync....I sync my e-mail using outlook)is trying to be connected to data (the internet). I just turn it back off when it turns on by itself. It doesn't ever seem to turn OFF by itself when I'm actually using WLAN.
EDIT:
one thing that may support my theory is that when you do a soft reset, it takes a bit to connect to the carrier network, and this just happens to be one of the times that WLAN turns itself back on..
And yeah, the battery usage definately sucks....plus when WLAN is turned on, and you're not connected to an access point, you could have data throughput issues as it keeps trying to see if it can connect through WLAN and/or radio......
I need it fixed , I didn't catch it earlier and my battery lost 85% today wihtout me even using my phone. Normally I get 2 full days I haven't really used my phone today and was fully charged this morning now I am at 15%, very poor performance for my typical use.
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Same here, but has only happened a of of times.
louderjw said:
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Click to expand...
Click to collapse
It only appears to happen while in a call for me as well...it happened with no additional software installed at that point so I'm certain it has something to do with the rom itself...I'm guessing the new radio but who knows for sure...
shame here
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Except that I've never installed WiFiRouter...
I don't have WifiRouter either.
cdoggwsu said:
Except that I've never installed WiFiRouter...
Click to expand...
Click to collapse
And I hvae never had the problem. (and I do run wmwifirouter)
i saw this when the kitchen first came out as well. i also saw that it wanted to connect to a roaming alot more than it should as well.
sprint will tell you to set you phone roaming settings to "sprint only" the phones and ROMs come with "automatic" enabled.
my sprint buddy told me long ago to change this from auto to sprint only. soft reset. let it conect to a good sprint connection. then switch back to "auto" and soft reset.
i haven't did this for a year or so, but when i started seeing the roaming icon after many of the soft resets i thought about it. since i did this i haven't seen the roaming nor the wifi bug.
i think it is the theory that when you softreset the phone set on auto looks for the first tower, which could be a roaming tower. this takes a little too long to conect. in this longer than normal connection time when something like activesync wants to connect and has no internet connection it will enable wifi to connect if it has to.
i have noticed in the past with other ROM's as well that if your phone is in flight mode and you soft reset. as soon as activesync tries to connect and cant it will turn on wifi.
try this. turn on flight mode. soft reset. open active sync and hit sync. you'll see.
so for the record... this is not a dcd bug, but rather a windows mobile bug. wm 5 and 6. the best fix is to set it to sprint only or do the trick i stated above.
Are any of you running the HTC Home Plugin with the weather patch?
Because I installed it on my XV6800 and on a soft reset the WiFi was acting wacky. As if it was looking for a signal.
All I did to correct this issue was to disable automatic roam / download of the weather.
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
jjlwork said:
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
Click to expand...
Click to collapse
Did you have this issue with your Stock ROM?
I only ran the stock 3.35 rom for about a day but I seem to recall it happened then as well. I didn't think it was necessarily DCD's rom but was an issue with the new radio. I'll try the steps cody recommended and see if that does the trick.
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Nor have I.
I just switched to sprint only, and after a soft reset, the wifi did not turn on as usual.
[email protected]$ said:
Did you have this issue with your Stock ROM?
Click to expand...
Click to collapse
No I did not, however I also did not have it on there very long. I flash often, and I am constantly tweaking, "My name is jjlwork have a flashing problem" lo
Interestingly enough I am able to reproduce by following cody's instructions with the flight mode -> soft reset -> activesync
Hi all,
Got a problem that I can't seem to find any suggestions on how to fix here on the forums.
My i-mate Jamin's wireless doesn't automatically detect wireless networks, and even when I specify the configuration manually, it won't connect either. So, there is no detection of wireless (the wifi does turn on alright), and the 'wifi on' tower icon appears, but doesn't try and search or connect.
I was starting to think this was a 100% hardware problem, but I found that if I try and create an ad-hoc network with my Jamin, other devices can see it. However, when actually trying to connect to the ad-hoc network, the Jamin still keeps trying to connect unsuccessfully.
This problem existed on WM5 (my original rom) and has still been the same on all WM6.1 roms I've used (ShadoW, iProphet etc).
Any suggestions on a software angle, or what to look for in terms of 'broken' hardware if I were to pull the device apart?
Cheers
try to update the ROM and the SPL, but be carefull
Thanks for the suggestion, but I've done both. I've got the HardSPL on my device, and I've got CloudyFa's WM 6.1 rom (and as I mentioned, I've tried about 3 other WM6 and WM6.1 roms too)..still no luck though.
It does, however, come up with the signal strength icon (like it can almost see the network) if you try and manually configure a network you know exists (eg my home network). It doesn't manage to connect to it though - just comes back and says 'unavailable'.
check if it is encrypted with WPA2. I think that version of cloudyfa is not compatible with that kind of encryption.
Zero|Cool said:
check if it is encrypted with WPA2. I think that version of cloudyfa is not compatible with that kind of encryption.
Click to expand...
Click to collapse
Definitely is only WPA here at home. Tried disabling it to no encryption, and likewise it doesn't work at my university (WPA) or at public wifi hotspots (no encryptions) or if you use WEP either. I've tried every setting on my router - and like I've mentioned, tried it in various other locations and routers...
Definitely something wrong with my device..but who knows what it is
RockDJ20 said:
Definitely is only WPA here at home. Tried disabling it to no encryption, and likewise it doesn't work at my university (WPA) or at public wifi hotspots (no encryptions) or if you use WEP either. I've tried every setting on my router - and like I've mentioned, tried it in various other locations and routers...
Definitely something wrong with my device..but who knows what it is
Click to expand...
Click to collapse
Try updating the radio ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
same problem here...never found a solution....
thycpt737 said:
same problem here...never found a solution....
Click to expand...
Click to collapse
Try a WM5 official ROM with a different Radio ROM.
l3v5y said:
Try updating the radio ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
Click to expand...
Click to collapse
Any suggestions as to the best version? I've upgraded from the base one to 2.20.21.
Also, how does the main memory go during this update (can't remember from last time I did it) - does it get erased / should I back things up?
Thanks
RockDJ20 said:
Any suggestions as to the best version? I've upgraded from the base one to 2.20.21.
Also, how does the main memory go during this update (can't remember from last time I did it) - does it get erased / should I back things up?
Thanks
Click to expand...
Click to collapse
Main memory should be fine, nothing is wiped.
As to the best version, I'd suggest trying a few, personally, I think 2.19.21 is the best, but that may just be me and my Prophet...
l3v5y said:
Main memory should be fine, nothing is wiped.
As to the best version, I'd suggest trying a few, personally, I think 2.19.21 is the best, but that may just be me and my Prophet...
Click to expand...
Click to collapse
Yep, main memory was fine. I've upgraded to the latest radio rom on that page, but still no luck.
So I've tried that one, your one was my original one (2.19.21) and my last one (2.20.21). Doesn't seem like it's a fix unfortunately..
Thanks for the help all the same. Anything else I could try?
Have same problem after I installed :touchflo 3d look.
RockDJ20 said:
Hi all,
Got a problem that I can't seem to find any suggestions on how to fix here on the forums.
My i-mate Jamin's wireless doesn't automatically detect wireless networks, and even when I specify the configuration manually, it won't connect either. So, there is no detection of wireless (the wifi does turn on alright), and the 'wifi on' tower icon appears, but doesn't try and search or connect.
I was starting to think this was a 100% hardware problem, but I found that if I try and create an ad-hoc network with my Jamin, other devices can see it. However, when actually trying to connect to the ad-hoc network, the Jamin still keeps trying to connect unsuccessfully.
This problem existed on WM5 (my original rom) and has still been the same on all WM6.1 roms I've used (ShadoW, iProphet etc).
Any suggestions on a software angle, or what to look for in terms of 'broken' hardware if I were to pull the device apart?
Cheers
Click to expand...
Click to collapse
Same problem here
Hey there, as I said befor I had the SAME EXACT PROBLEM (Vodafone S200 initial firmware - flashed several ROMS with no succes on wifi and finally decided to stay with bikertibi's 23102).
I think I somehow came across the solution (or the solution came across me) about the "when I turn on the wifi..."
It does:
1) look like its turned on as the upper icon appears and it says "on" on the display.
2) beeps the green led on the front speaker (or whatever is that)
BUT
It does not:
1) beep the radio signal (two waves) on the "wifi on" icon.
2) Find networks available
warning: my level of knowledge on PDA's is somewhere over the bottom limit so basically my interpretations of the solution will be more of that (interpretations) than it should be. So I beg for someone that knows what he's doing to try it and explain again.
Okay, after searching the unsearchable and MAKING SURE that it was DEF. NOT the USB cable, decided to give it a try to that icon "ADD NEW". That icon appears instead of the available networks, 'cause as I said my prophet wasn't detecting them.
So, I "added" a new one with ad-hoc (that is: tab on "add new", select ad-hoc, put a silly name and say yes to all) and then INSTANTLY and MAGICALLY (yes, Im THAT lamer) it all started to find networks all over the howse.
Other thing that might have been something on the process is that I was having my laptop with the wireless connected. At the first moment I connected the adhoc with the laptop but then tried to connect to another next door network with SUCCEED.
Finally, deleted the new added silly named network and it is still recognizing networks available.
PLEASE, SOMEONE THAT KNOWS ABOUT THIS, EXPLAIN IT WITH CLEAR WORDS!!!!
Hope it helps
Re:
Maybe you should check your network to see anything wrong with it...
There's nothing wrong with the network you guys. I've been having the same problem for over 3 years? Couldn't quite remember.
I STILL have my Qtek s200 with me now. Alive and kickin'. I still have a problem with my wifi. I can connect alright, and browse alright. BUT only if I'm 2 feet near my router. The reception is extremely poor 3 years back, still is extremely poor now. This is not a coincidence. I think something's wrong with our devices. Tried doing everything. cooked, uncooked, stock. original radio, ALL radio. Still the same. Same exact distance, the reception weakens after 2 feet. AND 2 FEET is way to short for WIFI browsing.
To add more that there is nothing wrong with my network at home:
1. got no password
2. I have a old Nintendo DS lite. Works Fine.
3. Got a Wii
4. Got an Old Xperia X1 (not quite old)
5. Wifey's on C905
6. Got a China Iped
7. Using an HTC HD7
8. My OLD MSI Laptop has WIFI connectivity.
9. My Sis got an Aino.
that's basically it, an everyday home WIFI activity connectivity. AS for my Prophet. Still looks black good. but still connects no good. everythng else connects fine though, beaming IR things, bluetoothing things. pretty much normal. All except WIFI.
3 years ago, I thought it was just me.
Everything turns on fine.The hot spot starts transmitting fine but none of my device can actually connect to it. tried with the tablet, laptop, ps3 and they wont connect even though the phone is actually transmitting signal because i can see the ssid but it wont connect any help thank you in advanced. Mod if this is not the right place to post this please move to the right one. thanks:cyclops:
It's not the update, mine works just as good as it did before the update.
BamAlmighty said:
It's not the update, mine works just as good as it did before the update.
Click to expand...
Click to collapse
you think a factory reset will fix my issue with the app
BamAlmighty said:
It's not the update, mine works just as good as it did before the update.
Click to expand...
Click to collapse
are you stock or rooted?
stock. only thing I did after the update was hold down the power button and did a forced restart.
Yeah, I'm also using the latest update, and I haven't had any problems. I'm using the connection to write this post now.
I'd try uninstalling and reinstalling the app, rebooting the phone in between. That's really all I can think of, assuming it was working before.
You can probably find the older version of the app somewhere - if you're still having problems, you could try that as a fallback.
g
gidkid said:
Yeah, I'm also using the latest update, and I haven't had any problems. I'm using the connection to write this post now.
I'd try uninstalling and reinstalling the app, rebooting the phone in between. That's really all I can think of, assuming it was working before.
You can probably find the older version of the app somewhere - if you're still having problems, you could try that as a fallback.
g
Click to expand...
Click to collapse
I just finish doing a factory reset now I'm putting all my stuff back once im done il try the app againg to see if i can get it to work thank you all for the help.
Wao just figure it out after doing a factory reset just notice that the problem was when you start the hotspot the wifi turns on and the problem was that phone was connecting to my router and the connection was not going thru tank you guys for all your help sorry for the inconvenience.
hi, i used to do it just fine but its few days
my pc doesn't have wi-fi so i connect to wi-fi with my phone and tether it to pc using usb
i ran speed test and it gives me 1.28mbps in pc and 2.7mbps in phone ! (sometimes 0.28mbps in pc !)
i play team fortress 2 on my pc fine, no lags, but sometimes ( so often) i get connection problem auto dc in 30 seconds which ends always EXACTLY at 20.0 ! sounds weird!
What service / carrier? Are you using the built-in USB tethering or another app? Are you rooted? Stock or custom rom?
es0tericcha0s said:
What service / carrier? Are you using the built-in USB tethering or another app? Are you rooted? Stock or custom rom?
Click to expand...
Click to collapse
im using wifi, not 3G
im using built in ! if there's any better app i will download it
im rooted and stock 4.4.2
and i got nexus 4 as you can see on my pic + signature
also, the weird thing is it happens EXACTLY every 20 seconds for EXactly 10 seconds !
anyone ?
EDIT: sorry it have been only a day, it felt like 3 days ! i thought i posted the last thing 3 days ago !
You might have to use another app that hides your activities such as PDANet or Clockwork Tether. Unfortunately though they do have free versions, they have limitations that might get annoying if you don't pay for the premium service. Another option would be a custom rom that has the tethering provisions removed already. Oh yea, if you are still on the stock rom, check for some kind of tetheringprovision.apk in /system/app. If there is anything like that in there, if you freeze it or rename it, that might help as well. Just hard to be more concrete with suggestions as carriers can have their own ways to trip up tethering usage vs others and it might just be a glitch, or they have something set up to make this a pain.
Try PdaNet+. There's a free version you can try to see if everything works. It times out after about 10 minutes and you have to reconnect. To connect via USB it requires a companion program to be installed on your PC. Try it a bunch of times and see if you can replicate the problem. If not, go ahead and pay $8 for the key to unlock the full version, which doesn't time out. If the problem persists, I'd have to guess that it's an issue with your carrier. Or it could be an issue with another app or mod that you're using that is causing an issue.
Thanks , it stoped! Didn't make any change!
Will check these of it came back!
Also it's around my exams and I don't have time check it thanks anyway