I need help!! This is the third time ive reflashed. The first time my screen was working, i got all my programs installed. Went to make a call and the speaker doesnt work. they say they can hear me but i cant hear them. I can hear them if i turn speakerphone on. Weird. And also when i slide open the keyboard, the screen would take unusually long to change to landscape and then not change all the way. That was fine i said i could deal with it. But just awhile ago my screen stops working, all it is, is an off black screen of the backlight. So i reflashed it. All through the installation i did not see the progress bar on my screen, but saw it on my PC. So i reflashed it for a third time, and the screen is still the off black. I just reflashed it to an old ROM of 3.35. and still the problem persists. My brother says i need to flash the IPL back to stock. I have no clue what that is though. Need help please. Need my phone back working.
kemlittleman said:
I need help!! This is the third time ive reflashed. The first time my screen was working, i got all my programs installed. Went to make a call and the speaker doesnt work. they say they can hear me but i cant hear them. I can hear them if i turn speakerphone on. Weird. And also when i slide open the keyboard, the screen would take unusually long to change to landscape and then not change all the way. That was fine i said i could deal with it. But just awhile ago my screen stops working, all it is, is an off black screen of the backlight. So i reflashed it. All through the installation i did not see the progress bar on my screen, but saw it on my PC. So i reflashed it for a third time, and the screen is still the off black. I just reflashed it to an old ROM of 3.35. and still the problem persists. My brother says i need to flash the IPL back to stock. I have no clue what that is though. Need help please. Need my phone back working.
Click to expand...
Click to collapse
You may be able to update your radio only and fix the problem from what I was reading. Please read through the wiki completely and then PM me if you need help after that. The link is here. The radio upgrade is here.http://rapidshare.com/files/125052225/Titan_Radio_ROM_3.42.30.rar.html and you will upgrade using the sd card method described in the wiki. Read well and you will understand it.
sounds more like you need to replace your phone. but first, try reflashing from the very beginning:
install olipro 2.4 (if you havent)
flash official sprint rom
flash dcd 3.2.5
flash radio 3.42.30
serfboreds said:
You may be able to update your radio only and fix the problem from what I was reading. Please read through the wiki completely and then PM me if you need help after that. The link is here. The radio upgrade is here.http://rapidshare.com/files/125052225/Titan_Radio_ROM_3.42.30.rar.html and you will upgrade using the sd card method described in the wiki. Read well and you will understand it.
Click to expand...
Click to collapse
Okay. Ive downloaded the Radio file. but searching through the wiki link, i go to the page where it has all the different radios. But says nothing about the SD card method. cant i just install it like i install the ROM?
Okay i finally got it working. And i can hear people on the phone. but why when i slide open the keyboard to go into landscape mode. The screen lags up really bad and doesnt load half of the screen?
and what the hell. now my screens went out again? anyone know of what hte problem could be?
Related
The problem I'm having is pretty severe!!!
My HTC 8525 was working fine until I tried unlocking it via Hermes unlocking tool,
It started off well, booted to the progress screen, but did not move...
When i tried resetting it, it went back to the 4 color screen, red blue green, white...
At this point I tried a hard reset, which did nothing but go back to the same screen.
I then went to htc'a website to see if I upgraded my rom to WM2006 to see if I can get back into my phone, but it goes to %12 in progress, then just freezes up...
When looking at image version its being upgraded too, it shows blank, as the upgraded image shows something, whatever it may be...
I have tried other upgraded roms, as well, but to no avail...
I know their is something that can get done, due to the fact that i can get to my boot screen!
Some help would be appreciated!
THANKS!!!!
What version of SPL are you using on your device?
Try SPL V7
http://forum.xda-developers.com/showthread.php?t=296722
When I tried doing that my phone doesnt even detect anything..
Is their a way that could go ahead and just install the orirginal rom that came with it and the radio...
Isnt just like installing a new OS like Win XP Or vista?
I had a similar issue. Just flash back to an original ROM and you should be fine. It worked for me.
I know their may be a thread about this already, but I honestly have no idea how to flash back my rom!
The problem is with most of these rom upgrades etc is that you need to use activesync, but that would not be possible to do in my situation....
Please some simple basic instructions would be great!!!
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
ruff_ryder_v12 said:
I had a similar issue. Just flash back to an original ROM and you should be fine. It worked for me.
Click to expand...
Click to collapse
Um? How? I didn't think I could 'go back' ??
see this thread:
http://forum.xda-developers.com/showthread.php?t=356231
Hey, I just tried to install DCD's newest ROM and it looks as if i may of bricked my phone. When i connect it to my PC, Active Sync will not even pick it up. this happened right after i ran Hard-SPL-MFG to unlock the phone... I did try and run the titan_exitbl but no luck. I also attempted to run the relocker but i would not even run.. any ideas?
thanks!
recover from flash
Are you at the 3 color screen? If so you need to unplug the USB and replug it again as per the instructions. You MUST follow the instructions EXACTLY or your flashing will be very scary experience.
If you are not at the 3 color screen, you need to get back to the bootloader by pressing power+camera and soft reset. This will get you to the 3 color screen. Then have a look at the version of bootloader you have. If it doesnt say Olipro 1.20 or 2.40 you still have the locked bootloader and you can flash a stock carrier rom. If you have 2.40 you can flash to the 3.16+ rom and then flash the new radio this way or via sd card install which will be more painless and less scary.
If you dont know what an sd card flash is, I would search the forums here. Over at ppcgeeks you can look up imcokeman's posts and see instructions how to do a sd flash.
If you are are real noob, I would suggest staying with non gps roms at this stage because the change of radio rom needed to enable you to flash a gps rom will almost certainly lead to sleepless nights wondering if you have bricked your machine.
Most important thing to realise is that the machine is almost certainly not bricked. But you might have a few more scary moments before you get your machine back working again. You might also need to call your carriers service desk a number of times to get your provisioning data back working.
Check all the way through these two posts and dont sweat too much. With effort you will get your machine back. The answer to your problems is listed in one of these threads, but you need to dig a fair bit to find it. The posts contain lots of problems that people had flashing this rom, and I am sure your exact problem was there and solved. Its I believe somewhere in the second link I have listed here.
Good luck. i feel for you.
http://forum.xda-developers.com/showthread.php?t=371314
http://forum.xda-developers.com/showthread.php?t=362566 particularly this bit http://forum.xda-developers.com/showpost.php?p=1856032&postcount=216
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
optyhtp said:
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
Click to expand...
Click to collapse
It doesn't need to active sync. Once it switches to USB you are ready to flash.
Stuck at Verizon Screen/HTC Mobilty Screen
If you are stuck at the VZW screen then you have only flashed one of the two essential parts. You need both (ROM and RADIO) to make it work. 3.16+ ROM will not work with the old radio. You need 3.27 radio.
Use the camera+power+soft reset and you can flash the one (new radio or new ROM) that you are missing.
See dcd's thread about the 2.3.2 rom. He has added a HUGE new disclaimer.
http://forum.xda-developers.com/showpost.php?p=1952956&postcount=1
Well nothing really worked so i used a sd card to flash back to the stock verizon ROM, i then attempted it again and got it all working!!!
Hi,
Sorry to stat a thread on this but can't find anything similar.
I've flashed a lot of ROM's prior. Thought I was fairly comfortable with it.
Currently, I have EnergyROM 6.5 and wanted to try another.
I can establish the connection with phone/computer (1st beep), then the second beep happens (activesync). Then I run the AthenaWrapper and it starts. It restarts the phone. I hear the first beep but never the second. The progress bar stays at 0% and eventually there is a communication error.
This happens with NATF's 6.5 ROM as well as the stock ATT rom.
Any suggestions on fixing this problem?
PS - the 'contacts' button at the bottom of the home screen... are those remapable? I have a mandatory program (Good Messaging) which has its own contacts program. Once I've installed it, the contacts button goes to it instead of the built-in contacts. That's not what I want.
Chris
txemsdoc said:
Hi,
Sorry to stat a thread on this but can't find anything similar.
I've flashed a lot of ROM's prior. Thought I was fairly comfortable with it.
Currently, I have EnergyROM 6.5 and wanted to try another.
I can establish the connection with phone/computer (1st beep), then the second beep happens (activesync). Then I run the AthenaWrapper and it starts. It restarts the phone. I hear the first beep but never the second. The progress bar stays at 0% and eventually there is a communication error.
This happens with NATF's 6.5 ROM as well as the stock ATT rom.
Any suggestions on fixing this problem?
PS - the 'contacts' button at the bottom of the home screen... are those remapable? I have a mandatory program (Good Messaging) which has its own contacts program. Once I've installed it, the contacts button goes to it instead of the built-in contacts. That's not what I want.
Chris
Click to expand...
Click to collapse
I had no idea what "Athenawrapper" was until I Googled Athena. The good news is I've solved your problem. The bad news is that you have a PEBCAK
error.
"Athena" is an entirely different piece of hardware from a Raphael , so it's RUU WILL NOT WORK with a Raphael. Frankly, I think you're lucky you didn't succeed in bricking the phone completely. You need to use the RaphaelWrapper to flash a Raphael.
On the off chance that you actually have an Athena, and are trying to flash it with a Raphael ROM, then you're still begging to have your hardware bricked. Most ROMs are not compatible outside of the hardware for which they are written.
You need to:
Figure out what hardware you have.
Go to that bulletin board.
Read the sticky threads there to learn how to flash properly.
Get to work.
Hi,
Well your explanation makes sense... however, the stock ATT ROM I downloaded from the raphael ROM development section and have successfully flashed a prior Fuze with before (I had to return it for warranty). It is the same file that worked then, that is not now.
But it is not working now AFTER I tried the NATF ROM which I'm pretty darn sure I directly downloaded from a link in the Raphael section. Perhaps it was a misguided link or something, and then it damaged the phone such that previously working ROM's now won't flash?
Chris
addendum...I know for sure it was the NATF ROM from Raphael section...
it is here http://forum.xda-developers.com/showthread.php?t=539513
If you did a HardSPL to load NATF's ROM, then you cannot flash back to the OEM ROM without first removing HardSPL.
So (and this is the second time in as many days ), here's my recommendation:
Myrddin Wyllt said:
Here's my recommended procedure:
Back up your PIM data, if needed.
Remove HardSPL.
Run your service provider's ROM installation.
Install HardSPL.
Download the NATF ROM (YES...DO IT AGAIN)
Flash the ROM.
Hard reset when you get to the screen alignment.
Yes, I know I'm yelling, but that's because you don't appear to be paying attention.
It would also be helpful if you'd put your device info in your user signature.
Click to expand...
Click to collapse
Re-downloading the NATF ROM ensures that you don't have a corrupted copy.
Myrddin,
Interesting name, how do you pronounce that?
1) I learned from you today about the HardSPL having to be removed. That I did not know, so thank you.
2) Back on the computer I flash with, I confirmed the wrapper files... first line does say Raphael Wrapper, under that it says Athenawrapper, then under that it says LSD creations.
3) I'll assume since you quoted your previous advice, the yelling and not paying attention comments were not directed at me
4) I'll do what you instruct master!
That's why we like the wise sages of the forum!
chris
It's Welsh, and it's pronounced Merlin, most of the time (Merthin is more accurate, though).
No, the yelling was not exactly directed at you, just at newbies everywhere. Take no offense, I merely wanted to place a great deal of emphasis on certain aspects of the process. It helps us help you.
M
Hi,
Well, somehow I managed to get back to the stock ATT Rom. I'm not sure how to remove HardSPL specifically as searching that topic doesn't bring up any specific threads (at least in the Raphael forum).
I thought since I had got the ATT rom to work, I coul ddo a 6.5 ROM, but I'm running into the same communication error I had before.
Very specifically, everything starts up fine. It causes my phone to restart.
The USB connection noise happens, but then I never get the activesync alert noise, so the download indicator stays at 0% and I get a communication error.
If I just plug my phone into the computer, it starts up activesync just fine.
Any suggestions? And if it is HardSPL, where's the instructions to remove that?
Thanks again,
Chris
Well shoot,
It must be my lucky day.. I did find some instructions for hardspl, did that.. and I think things are about to be working...
Nevermind on the last post for now!
chris
Hey everybody,
My phone is stuck in an infinite restart loop when i tried to revert back to the original rom without replacing the hardspl. Is there anything that can be done for that?
glz88 said:
Hey everybody,
My phone is stuck in an infinite restart loop when i tried to revert back to the original rom without replacing the hardspl. Is there anything that can be done for that?
Click to expand...
Click to collapse
Most often this is the result of a bad flash or a corrupt ROM. Try putting the phone in Bootloader mode (see the wiki for instruction), and download the ROM again (delete your old copy to avoid confusion). Try the flash once more, and don't forget to do a hard reset when you get to the screen calibration the first time.
Ok, so before the general populace of the forum, looks over this post thinking it's some noob who cant read through the forums to solve there own problem, i would like to say thanks in advance to anyone who can seriously provide some help.
Problem is as follows:::
1,)Phone is working fine using mini-winmo+cyan droid
2,) -PROBLEM- My android stops working, so now im stuck using a lite version of winmo
3,) Tried formatting the sdcard with the lite version winmo built in sdcard formatter, doesnt solve anything, dont exactly know what i was trying to solve with this step.
4,) I decide to get a nice fancy version of winmo, figured it would be as easy as just flashing it once n done.
5,)Decided on going with Ozrom, looked the best at the time.
6,) Run the ruucustom as admin, everything goes fine.
7,) -PROBLEM- after flashing the first boot leaves me stuck on the bootscreen.
So after all that i took the advice and tried to get back to the stock Tmous ROM, but as im typing this im still stuck on the Stick together screen, and also just for a control group i downloaded the latest HD2 cell winmo rom release, and that left me hanging on there version of the boot screen.
Same problem, different roms.. stuck on the loading/boot screen.
But, with the stock rom after playing around with removing the battery, simcard,sdcard and what have you i got the stock rom to boot!!!! I was so excited, i skipped the "How to use the on screen keyboard" tut and was typing in my email info when the phone reset on its own and all my hopes went down the drain... hopefully i will get some help on the issue, and like i said previously in the first paragraph i appreciate any and all help.
thanks.
---UPDATE---
Phone is on and working, intermittently.
When i plug the phone into the charger and wait for the amber light, it will boot up and actually enter into windows, now heres the kicker, removing the charger and using the phone will result in the phone turning off and restarting itself, hanging on the stick together screen.
Removing the battery, and replacing the battery after i push all the buttons, the same way you would power cycle a TV remote, and then connecting it to a charger is the only way ive been able to maintain the operation of the device.
Any ideas?
Try doing task29 reinstall winmo Rom of choosing.. see if that helps.. also I flash everything from bootloader. Also check battery pins make sure they aren't bent..
Sent from my Mytouch HD2
I just tried installing GreyBlur on my rooted atrix phone with GingerBlur installed..I followed the instructions corrently..When I turned the phone on it boots up..the GreyBlur screen comes up (instead of the At&T welcome screen) and then I see the locked home screen which it doesn't let me do anything..it's like the touch screen isn't responding or something..then it appears as it turns off and it won't light back up when i hit the power button. When I connect it to the computer, my phone makes the notification sound it always makes if its on and connected thru usb. The screen won't come back on..I don't know what to do. When I take the battery out and put it back in, it boots up again and the same thing happens...I don't know what to do..plese help! I need my phone!
Someone please help =( I can't find anything on this issue.
I'm willing to restore to the factory defaults if I have to.
The only thing that i can think of is flash back to 1.26, 1.52, or 1.56 (or .57, whatever it was).
ooor the new 1.83.
I didn't have this problem. Sorry I wasn't any help. Hope you get it fixed.
How do I flash back without having touchscreen functionality on my phone?
mikeabsurd said:
How do I flash back without having touchscreen functionality on my phone?
Click to expand...
Click to collapse
Follow this thread
http://forum.xda-developers.com/showthread.php?t=991072
I flashed back to 1.2.6
and it worked! Thank you guys so much for all your help.
I have no idea what went wrong and why I came across that issue.
I spent an hour looking it up and couldn't find anyone with the same issue
I was wondering if you have any recommendations what I should do now
to get out of my atrix. I'm still interested in greyblur and I wish I could
get it to work.