Need Help!!!(Activesync Problem) - MDA II, XDA II, 2060 ROM Development

i can sync my hima on both connection (bluetooth and USB) but the difference is:
i can only access internet through bluetooth connection but when pluging or sync in it on a cradle..internet connection stops (or no connectivity on the net)..
can somebody help me with my problem?..thanks

in newer roms under settings->connection there is an shortcut called
usb to pc
make sure the checkbox there is checked

Rudegar said:
in newer roms under settings->connection there is an shortcut called
usb to pc
make sure the checkbox there is checked
Click to expand...
Click to collapse
i have a newer rom..and the box is checked..and nothing happens..any solution?..

Related

Use Athena as Usb mass storage

usbsettings is a software that enables you to connect your Athena mobile 5 or 6 and use Athena as usb mass storage! just copy it to your device and run ....
lolik12345 said:
usbsettings is a software that enables you to connect your Athena mobile 5 or 6 and use Athena as usb mass storage! just copy it to your device and run ....
Click to expand...
Click to collapse
What's the difference between this and WM5Storage?
Excellent..
Good.. Work well..
700MB -> About 5~6Min..
Program is too small, so I like it..
Thanks..
Thanks! It works great!!! There is even no need to reconnect the cable. Simple and fast. Do you know who is the developer?
Thanks. Works very well.
There are three options in the setting. Turbo ActiveSync, Normal ActiveSync, and Mass USB disk.
I set it to Turbo and thought that transferring files is a lot quicker than before now.
WIth Mass USB, I could only see the device but not the storage card or microdrive. Is this normal? Is there a way to see all three?
Thanks man ) Write speed is 3,3 mb\s, read is 3,5
Nice program, I find it works a bit better than WM5torage.
BUT !
Do not connect as a USB mass storage device when using Audio Manager for it will (and does, I tested) f*ck Audio Manager up (logical, since Audio Manager will detect that the microdrive's been used by another application and try to refresh its library, endlessly since the lock isn't removed until the device is disconnected).
Finally something that works better than WMStorage... but can't switch to storage card only the microdrice... even without this option i finally can replace my usb stick with a usb cable...
Yes! Hurrah!
Unlike WM5torage, in ANY of its versions, this works!
Even got Turbo Activesync working using the instructions on the last post on that thread linked above: when Generic RNDIS is detected and Windows asks for a driver, tell it to search in c:\program files\microsoft activesync\drivers and that did the job for me. Don't know if it's actually any faster than standard Activesync, but it couldn't be slower.
Thanks very much!
Thank you veru match
1G In 9m >>>>>
JonSlater said:
Even got Turbo Activesync working using the instructions on the last post on that thread linked above: when Generic RNDIS is detected and Windows asks for a driver, tell it to search in c:\program files\microsoft activesync\drivers and that did the job for me. Don't know if it's actually any faster than standard Activesync, but it couldn't be slower.
QUOTE]
Okay, a follow up to that. The Turbo mode works by activating the network-via-USB. It works very well indeed here on my work PC, but doesn't on my home PC. It connects, but doesn't start the synch and just sticks on Looking for Changes.
I don't suppose anyone has a fix for that? Normal practice seems to be to untick the "Enable advanced network functionality" box, which is what this mode uses.
Click to expand...
Click to collapse
USB Storage
I have two issues: When I activate the attached USB file it disables Active Sync and secondly My computer doesn't seem to recognize it as a storage drive (I must be missing some type of PC USB file). Any suggested solutions would be greatful.
there will be a new utility in 4.0 of my roms. it is directly from htc.
It is possible to connect a flash disc to my athena?because i need space and the flash drives are bigger then the memory card.thx
Yes . You can - Athena has USB Host funcionality - You've to use 4in1 cable .
Pawel062 said:
there will be a new utility in 4.0 of my roms. it is directly from htc.
Click to expand...
Click to collapse
Can we find the utility from HTC without the ROM? I appreciate your work but I'm not a fan on changing my baby's ROM.
I trying to find references on Google for such tool without success.
Thank yopu in advance,
mahjong
Please everyone excuse me for my ignorance....but what does this software/utility do?
I get the picture that it download directly to the Microdrive via active sync...is that right?
Kenjari said:
Please everyone excuse me for my ignorance....but what does this software/utility do?
I get the picture that it download directly to the Microdrive via active sync...is that right?
Click to expand...
Click to collapse
No NOT via active sync and that is the beauty ! you can go to any modern computer and *without* installing active sync get the microdrive to show up as a USB memory stick and transfer data.
Great!Thanks!
JonSlater said:
Okay, a follow up to that. The Turbo mode works by activating the network-via-USB. It works very well indeed here on my work PC, but doesn't on my home PC. It connects, but doesn't start the synch and just sticks on Looking for Changes.
I don't suppose anyone has a fix for that? Normal practice seems to be to untick the "Enable advanced network functionality" box, which is what this mode uses.
Click to expand...
Click to collapse
Sounds like a firewall issue. Try without firewall.

Bluetooth and USB both use at a time

Hi PDA gurus,
I like to know, is it possible to use Bluetooth as well as Usb connection with the PC at a time?
Thank you in Advance
Hi Fracker,
could you describe the "use" a little bit?
You can connect to the PC via USB and connect with BT, but what are you trying to do?
PC settings
I presume you are trying to be connected to your PC by USB while you are using bluetooth for something else.
On the PC, in Activesync, you need to choose the connectio n settings for the connection and activate the option:
Allow wireless connections on device while connected ...
Fracker said:
Hi PDA gurus,
I like to know, is it possible to use Bluetooth as well as Usb connection with the PC at a time?
Thank you in Advance
Click to expand...
Click to collapse
Yes, sure thing... I done it..
@Cmw
my use meant connecting Prophet initially with one PC than another, and both can access the Prophet.
Thank you dkleuven, Danial6 & cmw for your help!!
Fracker said:
@Cmw
my use meant connecting Prophet initially with one PC than another, and both can access the Prophet.
Thank you dkleuven, Danial6 & cmw for your help!!
Click to expand...
Click to collapse
I don't think that would work well as I think active sync can only use one connection.
You may be able to use WM5Torage to access the memory card, whilst the device is connected to AS via bluetooth, but I've never tried that!

upgraded to new rom and radio and AS no longer works

i just finished upgraded to the newest rom and radio and now i cant connect to activesync for some reason....advance network functionality is disabled
it will connect with advance network functionality on but it just wont sync
EDIT: delete computer profile from phone, and delete phone profile from computer...then disable usb connection from computer and phone, then re enable and it should connect fine
colton1118 said:
it will connect with advance network functionality on but it just wont sync
EDIT: delete computer profile from phone, and delete phone profile from computer...then disable usb connection from computer and phone, then re enable and it should connect fine
Click to expand...
Click to collapse
syncing with an exchange server or your computer? if with your computer which OS are you using?
jambrose said:
syncing with an exchange server or your computer? if with your computer which OS are you using?
Click to expand...
Click to collapse
my computer, windows xp.....i got it to work already
For future reference if this thread is found in a search:
Titan Wiki
ActiveSync Troubleshooting

6828 on WM6.1 cannot connect to activesync

please help, just yesterday i was able to connect to activesync but now i cant it just stays connecting then it cannot connect but windows detects it as windows CE device here's what ive tried so far:
1. tried the activetoubleshooter :still cannot connect
2. tried a dozen usb cables and connected it through the main usb port: still cannot connect
3. reinstalled activesync (from microsoft site), rebooted pc and my rw6828: still cannot connect
4. disabled windows firewall, rebooted : still cannot connect
5. unchecked the Programs>settings>connections>usb to pc> enable advanced network functionality: still cannot connect ( i noticed that if i unchecked the advanced network functionality and i would got to activesync>menu>connections> "WHEN CRADLED" there's no usb option and if i check the advanced network etc etc it shows the usb option
man this is so annoying, i cannot install anything...hope you guys know what to do, ive been fixing this for the last 7.5 hours non stop with no solution...
did a hard reset and it connected...sigh..wonder what caused it? anyway time to install all the apps again...
zerosynergie said:
did a hard reset and it connected...sigh..wonder what caused it? anyway time to install all the apps again...
Click to expand...
Click to collapse
uncheck the USB to PC if any from your system/connection setting
Goto phone Setting -> Connections -> USB to PC, check whether USB connection is ticked or not...
did that already guys but like what i said:
unchecked the Programs>settings>connections>usb to pc> enable advanced network functionality: still cannot connect ( i noticed that if i unchecked the advanced network functionality and i would got to activesync>menu>connections> "WHEN CRADLED" there's no usb option and if i check the advanced network etc etc it shows the usb option
i finally found the culprit its the pocket mechanic app, i ran all the tests there and deleted some stuff, maybe something with the usb connection got deleted also so beware!
zerosynergie said:
please help, just yesterday i was able to connect to activesync but now i cant it just stays connecting then it cannot connect but windows detects it as windows CE device here's what ive tried so far:
1. tried the activetoubleshooter :still cannot connect
2. tried a dozen usb cables and connected it through the main usb port: still cannot connect
3. reinstalled activesync (from microsoft site), rebooted pc and my rw6828: still cannot connect
4. disabled windows firewall, rebooted : still cannot connect
5. unchecked the Programs>settings>connections>usb to pc> enable advanced network functionality: still cannot connect ( i noticed that if i unchecked the advanced network functionality and i would got to activesync>menu>connections> "WHEN CRADLED" there's no usb option and if i check the advanced network etc etc it shows the usb option
man this is so annoying, i cannot install anything...hope you guys know what to do, ive been fixing this for the last 7.5 hours non stop with no solution...
Click to expand...
Click to collapse
Whose ROM are you using? It is known that some older nhocbanme's 6.1 ROMs have this problem.
Try different ROM. helloworld1 is good.
activesync problem
try this:
download and install activesync 4.5 version
Disable firewall first and then connect the phone to pc.

Usual Question : Activesync bluetooth

Hi,
I have an USB stik (sitecom CN-521 V2)
a can't use activesync via bluetooth
thank
habibdu70 said:
Hi,
I have an USB stik (sitecom CN-521 V2)
a can't use activesync via bluetooth
thank
Click to expand...
Click to collapse
You really need to provide more details of what you are doing and at what stage you encounter difficulties.
Have you synced with a USB cable first? Is your USB stik (I imagine you mean a USB bluetooth adapter?) working with other bluetooth devices? Dows your HTC Rose see your computer using bluetooth?
Plenty of great people ready to help out here, but you need to be specific please.
but why u want connect via BT ? its much better via USB and in settings u can set "fast transfer" or faster option its phone can be detect lake mass storage

Categories

Resources