Hi,
I have the Vario II and I would like to upgrade my radio to 1.20 and I've been reading the wiki and various posts here to learn about it. I followed the instructions to check my bootloader version (side OK + Power then pressed Yes onscreen). That worked and I see that have v1.04 - great. The instruction said use stylus to load windows normally but nothing on the bootloader (3 colour) screen or any buttons did anything so I took the battery off and on again.
WM5 boots fine but now but I cannot get into the bootloader again to do pof's SuperCID or the radio 1.20 upgrade. It just turns off when I do a side OK + Power + press Yes.
can anyone help?
nahguam said:
Hi,
I have the Vario II and I would like to upgrade my radio to 1.20 and I've been reading the wiki and various posts here to learn about it. I followed the instructions to check my bootloader version (side OK + Power then pressed Yes onscreen). That worked and I see that have v1.04 - great. The instruction said use stylus to load windows normally but nothing on the bootloader (3 colour) screen or any buttons did anything so I took the battery off and on again.
WM5 boots fine but now but I cannot get into the bootloader again to do pof's SuperCID or the radio 1.20 upgrade. It just turns off when I do a side OK + Power + press Yes.
can anyone help?
Click to expand...
Click to collapse
press ok+power+reset with stylus
D'oh, my bad. I thought "press reset with stylus" meant press Yes... I didn't realise the recessed reset button existed until now! Had it said "push in" rather than press I might have been quicker off the mark. Oops.
All sorted now.
Slight problem.
Some text messages are not being received now. Anyone else experienced similar problem?
T-Mobile UK
ROM version: 1.21.110.3
ROM date: 06/19/06
Radio version: 1.16.0.0 (pof's superCID one)
Protocol version: 32.53.7018.01H
nahguam said:
D'oh, my bad. I thought "press reset with stylus" meant press Yes... I didn't realise the recessed reset button existed until now! Had it said "push in" rather than press I might have been quicker off the mark. Oops.
All sorted now.
Click to expand...
Click to collapse
I speak spanish
i have the same problem but a HTC Alpine, i don't know what to do.....
medievale said:
i have the same problem but a HTC Alpine, i don't know what to do.....
Click to expand...
Click to collapse
You are in the wrong forum for the alpine.
Suggest you read the Alpine Wiki and then the HTC Alpine Forum
Please help me,
I can not open Contacts for Both PDAVIET 4.0.0.0.6 and Prophet Touch.
I have try for few hour to upgrade and downgrade ROM, tried PDAVIET and Prophet Touch. Both of them dont let me run contacts. The contact opens for less then 1sec and closed.
I tried to activesyn contacts with my computer, it gave me an error that my phone runs critical low memory, asking me to close running programs. I did but still can not synchronize the contacts too.
my phone details:
Dopod 818pro
IPL 2.20
SPL 2.15.0000
GSM 02.19.21
OS 4.0.0.0
Please assist. thanks
hlwong said:
Please help me,
I can not open Contacts for Both PDAVIET 4.0.0.0.6 and Prophet Touch.
I have try for few hour to upgrade and downgrade ROM, tried PDAVIET and Prophet Touch. Both of them dont let me run contacts. The contact opens for less then 1sec and closed.
I tried to activesyn contacts with my computer, it gave me an error that my phone runs critical low memory, asking me to close running programs. I did but still can not synchronize the contacts too.
my phone details:
Dopod 818pro
IPL 2.20
SPL 2.15.0000
GSM 02.19.21
OS 4.0.0.0
Please assist. thanks
Click to expand...
Click to collapse
Do a hard reset
Press Camera + Comm manager button and stick the stylus in the litle hole beside the usb port then release the stylus but keep pressing camera and Comm manager button til some white test is displayed on screen then press the green phone button phone starts and you have your contacts
or goto start--- settings ---- system --- open Clear Storrage --- type 1234 in the box and press yes --- phone restarts and you'll have your contacts
gullum said:
Do a hard reset
start--- settings ---- system --- open Clear Storrage --- type 1234 in the box and press yes --- phone restarts and you'll have your contacts
Click to expand...
Click to collapse
it works, thanks gullum you have save my phone if not gonna downgrade to WM5.
thank you very much.
hlwong said:
it works, thanks gullum you have save my phone if not gonna downgrade to WM5.
thank you very much.
Click to expand...
Click to collapse
For your information, in case you will ever flash your device again:
It is really necessary to do hard reset after flashing with Upgrade .bat. It's the final step to clean old WM5 stuff and use your new cooked WM6 without problems.
...tried to unlockit with the athena-unlocker! After Step 1 it startet to Step2 und suddenly the connection was lost!
Now the battery lamp of the Ameo is in green mode!
I can make a factory reset, but I see no bootloader mode!
Screen is black an a green light aroundthe joystick! The Connection via active sync to my pc isn't available any mory!
What do you think?
game over - any change to bring my Ameo back to life?
Edit1: ther is no MiniSd Card inside
Hi, I do not think your Ameo is lost. Some else hat the same problem, please check http://forum.xda-developers.com/showpost.php?p=1358430&postcount=35 and try the steps described there. In most cases, it is also possible to flash WM6 if your device is stuck in the bootloader.
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
...you were right - thx a lot 4 the solution
stupiddog said:
There are two things I would like you to try:....
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Thx a lot
Jackpot thx -
Kisses from Austria
Many thx!
utakurt said:
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Click to expand...
Click to collapse
You're welcome, have fun with WM6 However, if you want to kill the SIM-Lock/Net-Lock on your device, you have to run the unlocker again. It seems that WM5 has some problems running the unlocker while WM6 does not.
After you successfully run the unlocker again, remember to flash your WM6 ROM again (watch the battery power, it should always be >50% before starting flashing!) so you have the newest Radio version.
If problems persist after flashing, this page in the XDA wiki might be helpful: http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
stupiddog said:
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
Hi, mate
Wot if those two things does not work??
i mean
if we can not get into boot loader or hard reset
i have this ameo does not go into boot loader or does not do hardreset
only red light on the joystick
problem occured while unlocking with Olipro, completing step 1 (got stuck at the point of saving the spl file)
thank you very much in advance for your help
BR,
!!! WARNING !!!
USE IT ON YOUR OWN RISK!
theoretically, My upgrade method would not brisk your device,because it would not touch your boot loader or radio.
but there is no guarantee.
many thanks to bepe and ferryboat and the people who make the cooking tools!
info:OS 5.2.19199 (Build 19199.1.0.0)
.NET CF Framework 3_5
ArcsoftMMS 4_2_8_1
6MB Pagepool
the rest stuff is the same as offical rom(because I have not so much time to cook it, sorry!)
Here is the upgrade procedure,.
1.format the sd CARD(should not be more than 2g) use FAT 16 and copy the al1.dio to your mini sd card.
(the mini sd card should not contain any other files except al1.dio)
2.Enter BootLoader menu (by pressing "Record button + Reset button")
3.wait for the percentage number to be 100% and then it will reboot automatic
because the xip space is not enough, so I have delete the first bootsplash screen,So if you soft-reset,then you would not see the first screen, Instand,you will see something else, you will know that time.
It's normal and just a moment it will pass to second bootsplash screen.
the only bug I know right now is if you soft-reset the device by pressing the Reset button,then your recent sms and phone record (not the ones exited long time age) may lose.
The best solution is that use software to soft-reset,in that way,you would not lose any sms or phone record.
and I find out that if the message box contain more than 100 sms,then press the Reset button to soft-reset device would not make your sms lost.
Sorry for my poor english,and IF YOU DO NOT UNDERSTAND THE upgrade procedure, JUST ASK BEFORE YOU USE IT!
ENJOY THE NEW ROM!!!and I hope someone can cook it ,make it to be the best rom ever!
To download ROM
http://www.fs2you.com/files/f5ff9578-d3ef-11dc-86fe-0014221b798a/
THANKS TO Lann_78 FOR THESE LINKS:
MEGAUPLOAD Link
http://www.megaupload.com/?d=822ZBUD9
Rapidshare Link
http://rapidshare.com/files/89790939/al1.DIO.html
seems i'm gonna be the first to D/L m8.... thx a ton
gonna try it though after 7th as need my PPC in the present condition till then after that its trial time [email protected]!
thx again and TC
keep up this gr8 work m8...
will post my response soon ;-)
m8 could you kindly post some screen shots till then ...
i just cannot wait to see WM6.1 in action....
Please...
thx and TC
oops sorry m8 just saw that you have added the screenies...
thx ;-)
last time I did sd update end up with brick my ATOM Hope this times will not BTW thank you so much for sharing
slum44 said:
last time I did sd update end up with brick my ATOM Hope this times will not BTW thank you so much for sharing
Click to expand...
Click to collapse
This rom is only an os part.It can not brick your phone. I have used this rom for a few days,I think it excellent.
Thank qq108108108 share it to us.
yfdid said:
This rom is only an os part.It can not brick your phone. I have used this rom for a few days,I think it excellent.
Thank qq108108108 share it to us.
Click to expand...
Click to collapse
I agree,I have use this method to flash my device for many hundreds time,So I think it's quite safe!
I have try to access the bootloader using
2.Enter BootLoader menu (by pressing "Record button + Reset button")
But doesn't work for me, anyone can advice? IPL V 0.8
afterlife said:
I have try to access the bootloader using
2.Enter BootLoader menu (by pressing "Record button + Reset button")
But doesn't work for me, anyone can advice? IPL V 0.8
Click to expand...
Click to collapse
Press both button, then release the reset button first,.... followed by the record button.... it worked for me...
What to select? And how to select them? I try all buttons none is working. Please advice. tks
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
afterlife said:
What to select? And how to select them? I try all buttons none is working. Please advice. tks
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
Click to expand...
Click to collapse
Here...
Here is the upgrade procedure,.
1.format the sd CARD use FAT and copy the al1.dio to your mini sd card.
(the mini sd card should not contain any other files except al1.dio)
2.Enter BootLoader menu (by pressing "Record button + Reset button")
3.wait for the percentage number to be 100% and then it will reboot automatic
Meaning, u got to have a blank mini sd card with just the al1.dio in it.
Once u go to bootloader mode, it will automatically load that file and restart....... to wm6.1
When i press the Record + Reset (On - Off button on top of the device) it will just give me a screen "Goodbye" then it will just shut down.
But if i access the above it gives me Mini-SD DETECTED but nothing happens.
I have formatted my SD card on my PC with FAT 32 and only tat file is inside.
afterlife said:
When i press the Record + Reset (On - Off button on top of the device) it will just give me a screen "Goodbye" then it will just shut down.
But if i access the above it gives me Mini-SD DETECTED but nothing happens.
I have formatted my SD card on my PC with FAT 32 and only tat file is inside.
Click to expand...
Click to collapse
Reset button is the tiny hole below where u have to poke using the stylus.
When press record + reset (tiny hole), same just go into the Al1 640K EBOOT screen.
Do u think it's my SD Card problem? I'm using 2GB Kingston...
release the reset button first,.... then followed by the record button...
wonder how u got to this before..
((Originally Posted by afterlife
What to select? And how to select them? I try all buttons none is working. Please advice. tks
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART ))
once it comes out to this, it will read the sd card..
I can access to this page but will just stuck there... nothing will happen... I'm using Vista to format my Mini SD Card, to FAT32
yfdid said:
This rom is only an os part.It can not brick your phone. I have used this rom for a few days,I think it excellent.
Thank qq108108108 share it to us.
Click to expand...
Click to collapse
excellent work both of freak and yfdid
afterlife said:
I can access to this page but will just stuck there... nothing will happen... I'm using Vista to format my Mini SD Card, to FAT32
Click to expand...
Click to collapse
Oh.... then i don know wat else..... sorry
Tks anyway... I guess i will need to wait for other method to flash the new rom
qq108108108 said:
!!! WARNING !!!
USE IT ON YOUR OWN RISK!
theoretically, My upgrade method would not brisk your device,because it would not touch your boot loader or radio.
but there is no guarantee.
many thanks to bepe and ferryboat and the people who make the cooking tools!
info:OS 5.2.19199 (Build 19199.1.0.0)
.NET CF Framework 3_5
ArcsoftMMS 4_2_8_1
6MB Pagepool
the rest stuff is the same as offical rom(because I have not so much time to cook it, sorry!)
Here is the upgrade procedure,.
1.format the sd CARD use FAT and copy the al1.dio to your mini sd card.
(the mini sd card should not contain any other files except al1.dio)
2.Enter BootLoader menu (by pressing "Record button + Reset button")
3.wait for the percentage number to be 100% and then it will reboot automatic
because the xip space is not enough, so I have delete the first bootsplash screen,So if you soft-reset,then you would not see the first screen, Instand,you will see something else, you will know that time.
It's normal and just a moment it will pass to second bootsplash screen.
the only bug I know right now is if you soft-reset the device by pressing the Reset button,then your recent sms and phone record (not the ones exited long time age) may lose.
The best solution is that use software to soft-reset,in that way,you would not lose any sms or phone record.
and I find out that if the message box contain more than 100 sms,then press the Reset button to soft-reset device would not make your sms lost.
Sorry for my poor english,and IF YOU DO NOT UNDERSTAND THE upgrade procedure, JUST ASK BEFORE YOU USE IT!
ENJOY THE NEW ROM!!!and I hope someone can cook it ,make it to be the best rom ever!
To download ROM
http://www.fs2you.com/files/f5ff9578-d3ef-11dc-86fe-0014221b798a/
Click to expand...
Click to collapse
Is the Interface for WM6.1 supposed to be that way?
Cos I saw the so called "leaked" interface of the WM6.1 is so different.
Hi, I have a T4242 with WM6.1 and WM6.5 wanted to install but none of the procedures found in the internet for the T4242 or T4242 + worked, I tested the procedure for the T3238 with the file k3img.bin updated and only the keys no longer work, the Touch works normally but the keys type Vol Up - Down Vol take no more and the key now is the key Dial Red
By contrast he was much quicker than before.
Would not someone pass me a T4242 with WM6.5 ROM in BIN format, so I can apply the T4242 by IDT program?
If it can be even better in Portuguese.
Or a way to configure the hardware device.
OBS: Translated by google.
Assume you have read the HTY thread in this forum.....http://forum.xda-developers.com/showthread.php?t=607709
Perhaps one if the guys there can help you out.