Related
Hi all,
recently upgraded my i-mate with:
ROM version: 1.72.00wwe
Radio version: 1.14.00
and when trying to send sms, getting the following message: "the phone is not ready. wait 15 sec and try again".
The same message gettig when trying to make phone settings.
Does anyone have ever experienceâ the same problem, please help!
THNX!
Yup
You should really wait that long before you do anything to the phone. If you wait too little you'll end up wating more time as the timer seems tto reset whenever this message is shown. If you wait 30 seconds then everything is fine.
If you got this message after waiting several minutes when there might be something wroong with your flash. Mayby you should try a never radio stack e.t.c.
It takes a little getting use to, unfortunately.
Powershot-g2
Problem solved
If somebody is interested, I have solved my problem with reinstalling the upgrade. Empty PDA doing well until restoring backup. After back up, the same problem occurred. Then I did the following: hard reset and one by one installation of all programs that I had before. After each installation checking for any problem with sms. No problems so far.
Are yoy restoring a backup from a orevious version of WM2003? If so, this may be the cause of the problem. THe bacup process is known to restore a lot of system files along with your data and that can sometimes cause problems.
Steven
I had the same when I upgraded to 2.02 rom version, but left my radio version to 1.08.
I upgraded to 1.18 radio but I was left with a bootscreen only.
So I again burned the thing with 2.02 and 1.18 and everything was fine (except sms notifications)
I guess its an incompatiblity between your rom and radio somewhere...
This happened to me once... but what's really annoying is when you received a message, sometimes you'll see the pop-up message icon at the upper part (near the time and speaker). But on the today screen message, it doesn't appear to have a new message. Does this happen to you guys? This is really annoying...
i have a problem after the update to 1.72WWE
the problem with the SMS reports !
the device don't recieve them !
why?
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Hmmm... have you read the Sticky thread on bricks? This sounds like a problem I have seen in there. Probably easy to fix - first try flashing back to where you started. Read through the sticky - it will help you.
http://forum.xda-developers.com/showthread.php?t=286755
How long ago did you flash? Did it never work after flashing or did it work for a day, a week...? Need more info. I assume you verified that the SIM isn't the problem?
yes i have read the brick thread and have tried flashing it again but it didn't seem to work. i've also re-did the radio ROM as well.
I flashed and upgraded to wm6 after the network problem and it still doesn't seem to work.
I don't think it's the sim problem as it works with my other phone SE k800i. But i'll try changing the sim card and get a new one on monday.
I'm leaving the option of sending it to Teleplan as a last resort as it is quite a hassle to send the dopod all the way to sydney when i'm situated in Perth.
Anyone know a service center for dopod in Perth?
dopod 838pro
i'm not sure but when i use my optus sim card, it seems to work. but not with my 3 sim card.
louiedafly said:
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Click to expand...
Click to collapse
Try starting up your phone with no sim card and see what happens, I think have the same problem, I can't use any other radio than 1.16, and even that may have problems. If I use any other radio roms, I get no service, and if I take out my sim, it doesnt even realize that there is no sim, it says no service, and also the phone will freeze on the today screen with half the plugins loaded.
BTW what radio are you using?
I get the same error with my 3 sim and the .41 radio rom.
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Since i have upgraded to PDAviet i have almost the same problem.
After soft-resetting my device no gsm connection is found.
The only solution is to go into phone option and start the manual search.
If it's connected it works without any problems.
Strange thing....I also tested a few gsm roms but always the same experience.
R0N1N said:
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
Click to expand...
Click to collapse
Reflash Radio ROM (2.47.21 or 2.69.21 will work)
To reply to all of your suggestions. I have tried 5 different radio roms, none will see the phone network (GSM not GPRS) for more than a few seconds with a weak signal, then they fail and either go to flight mode or say that the SIM is missing. To reiterate, this was working fine up until yesterday with a few different WM6 ROM's. Coincidentally, the rear speaker failed at the same time. I resolved that issue, but the lack of phone service persists, although all AKU 2.2 ROM's work fine. Very curious....
DeviLduck said:
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Click to expand...
Click to collapse
It is CHAP, although I am referring to the phone service not wireless GPRS. My network is configured for auto, although if I switch to manual (due to the lack of consistent conntection), it will not be able to see any networks, except briefly and intermittently.
Cheers
WM6 Sim Card issues [solution, use radio rom 2.19.21]
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any AKU 2.2 version ) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Same Problem !
I have exactly the same problem !! it's not from radio ROM or OS !! I've tried 3 different version of radio ROM, and almost every single WM6 OS that is out there ! my phone stop responding yesterday after i changed my OS from PDAVIET 4.0.0.0.4 to SMART1.3 ! since then I've tried everything, but I can't get the phone to work in any WM6 OS! although WM5 (any version of it) is okay !
hma4 said:
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any version) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Click to expand...
Click to collapse
Did it used to work?
Yes , it used to work ! I've been using WM6 for more than 2 weeks with no problem! recently I upgrade my os to PDAVIET 4.0.0.0.4, but I decide to change the OS back to SMART 1.3, after I changed it back, i got the error "Unknown SIM card , without the pin you can call emergency calls only" I tried my pin and PUK , but none works ! So i changed the OS to WM5 again. I've tried couple of different version of WM5 (JESTER, NVID) and I've found the phone works perfectly in wm5 !! as I said before I tried re-flashing my Radio ROM, but it didn't help !! i still can't get my phone to work in WM6 ! any of Pocket PC gurus, have any suggestion ?
S200 Gone Wacko with WM6 and I don't know why
Hello people
Okay so here is the situation, since about last week I have been using PDAViet 4.0.0.3 on my Qtek S200
Now I love this ROM..so much so that I spoon with it at night...um...crap lol Its fast and lite...but something went terribly terribly wrong yesterday
So around 1pm I disconnect my phone from my computer, and notice a "X" in the data connection arrows...okay I thought nothing of it. I go to a restaurant, get a phone call from my brother, and talk, and everything is fine. From there it went bonkers...it kept on trying to connect a GSM signal, and then would go out to no service...it would keep on trying and trying, and bogging down my phone....
So finally i got it stablize (with an EDGE data signal i thought) and of course a voice signal and went on my merry 2 hour drive back home to Montreal.
When I got to Montreal and was waiting in the dead moving traffic jam, I wanted to check the Windies cricket score on BBC, so I take out my phone and try to make a data connection. But again the X showed...i rebooted my phone and signal about 10 or 20 times, and finally got something...however by the time that happend I had arrived at home so i went and used my computer.
The GSM signal stayed, but I dont know if I had a data connection. I then went to a funeral, turned off my radio entirely, and then when I turn it back on...ooooooooo no signal...it would get 2 bars, and then drop, and then 2 bars "E" symbol, and then drop.
So from then on, i went nuts, opened up the back, took out the battery, checked the sim, installed another sim to make sure..and by now it went even worse..first INVALID SIM...then it went to MISSING SIM...urge to kill rising!
I finally said F it, and hard resetted my phone...but i noticed something upon the screen calibration..."NOTIFICATION ERROR...cannot find calnot.exe". After hard resetting and such, the problem still showed...
This morning, after leaving it overnight, it was still misbehaving...so I went to took it back down to the floating NVID file found here on XDA developers...and oddly enough...no more calnot.exe error...the radio signal is strong, and i get a data connection...So i tried to then upgrade to the new PDAViet 4.0.0.4s ROM, but again...calnot.exe error...so finally i am stuck at the NVID ROM...oy!
So I searched here on XDA Developers and on google...now while people have said they get the calnot.exe error, they also get this reglog.dll (or something to that effect) error as well...me on the other hand am only getting that calnot.exe error, which would seem to be the root of my problem.
What can I do fix this, and get back to the speedy 4.0.0.3 ROM (man I love that ROM)
Phone info:
ipl: 2.09
spl: 2.20.0000 (so I guess that my Qtek S200 is a G3 model)
radio: 02.47.21 (i even moved up to 02.69.21)
os: 2.20.7.34
so i really appreciate the help guys...take care...
*howls like a wolf*....nothing?
hofo_mofo said:
*howls like a wolf*....nothing?
Click to expand...
Click to collapse
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Holy S*** I have the same Problem for like two weeks!!
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
tonydeli7 said:
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Click to expand...
Click to collapse
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
hma4 said:
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
Click to expand...
Click to collapse
In a way I am glad you are having the same problem...so I know I am not a nut lol (and nor am I alone)...but of course its not good to relish in someones downfall, so of course it is also a bad thing eh..
What ROM would you suggest then? NVID seems alright, but I don't know of any others out there (well somewhat)...thanks!
I wish we knew why it happened at first place!
for wm5, if you want a clean, fast and reliable Rom, try Jesterz Rom
http://forum.xda-developers.com/showthread.php?t=284578
you might want to re flash the start-up image to HTC logo... you can find the .cap in the same thread.. I also updated the radio rom too, you can find it in prophet wiki.
Jesterz Rom is nice cause you don't have to uninstall anything, it's really clean and stable. it is by far better than NVID, but don't ask why cause i have to ramble a lot.
Oh by the way if you found out why this happened to us .. let me know
hofo_mofo said:
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
Click to expand...
Click to collapse
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
tonydeli7 said:
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
Click to expand...
Click to collapse
Okay, I spend another 2 hours to update the phone ! This time i didn't get the
Calnote.exe or replog error !! but my phone still doesn't work !
The phone connection is not stable ! it comes and goes ! and i get " Unknow SIM status. 3 attempts remaining. Only emergency calls can be made without a pin." well i tried different sim card , and i still get the same error !
HELPPPPPPPPP Pleaseeeeeee !
I just Upgraded my phone to ASreg3.3.12, and LvsW Aku2.3 and still doesn't work !!
I get the same error ! the Phone App doesn't function! I get Unknown Sim Status! I've tried NVID, and Jesterz Roms , both AKU 2 and both work fine !!
any suggestions ?
Strange, however, can you post which radio version you have when you switch roms ? it could a radio rom problem....
im in serious problem now.. i can't send and receive sms.. i tried black shadow and faria.. it will just work for few minutes or an hour and after that my messages are stuck in outbox.. my radio version is 1.43.. i downgraded step by step just to check if its working fine.. right now im using 1.40 but still the same problem.. my bootloader is 2.10 - Hard-SPL-V7
any solution guys.. this is the saddest party of my life..
blackphnx said:
im in serious problem now.. i can't send and receive sms.. i tried black shadow and faria.. it will just work for few minutes or an hour and after that my messages are stuck in outbox.. my radio version is 1.43.. i downgraded step by step just to check if its working fine.. right now im using 1.40 but still the same problem.. my bootloader is 2.10 - Hard-SPL-V7
any solution guys.. this is the saddest party of my life..
Click to expand...
Click to collapse
I have no solution for your problem...
blackphnx said:
im in serious problem now.. i can't send and receive sms.. i tried black shadow and faria.. it will just work for few minutes or an hour and after that my messages are stuck in outbox.. my radio version is 1.43.. i downgraded step by step just to check if its working fine.. right now im using 1.40 but still the same problem.. my bootloader is 2.10 - Hard-SPL-V7
any solution guys.. this is the saddest party of my life..
Click to expand...
Click to collapse
HI,
Maybe you could check your sms setting from your operator.
Or, you can do this;
(Settings)->(Phone)->(Services)->(Voice mail and Text Messages)->Press Get Settings.
That's it.
Try it and report back.
regards,
mmorisa said:
HI,
Maybe you could check your sms setting from your operator.
Or, you can do this;
(Settings)->(Phone)->(Services)->(Voice mail and Text Messages)->Press Get Settings.
That's it.
Try it and report back.
regards,
Click to expand...
Click to collapse
i tried it and even called my operator.. she gave me some settings which i did but it didn't help.. strange thing is... whenever i change ROM.. like from black shadow to faria... it would work for couple of hours or maybe certain amount of messages then it won't send and remains in outbox.. right now.. i downgraded to WM5 and SPL 1.4 and radio 1.40...
blackphnx said:
i tried it and even called my operator.. she gave me some settings which i did but it didn't help.. strange thing is... whenever i change ROM.. like from black shadow to faria... it would work for couple of hours or maybe certain amount of messages then it won't send and remains in outbox.. right now.. i downgraded to WM5 and SPL 1.4 and radio 1.40...
Click to expand...
Click to collapse
Hey mate...
Recently, i got the same problem (also post a new thread here) with the black pro and LVSW version...
After investigate, i found the it is the problem of o2 SMS plus, this software totally conflict with wm6 right the moment.
For your case, i suggest you try to hardreset your device first.
Don't install any software, test it for a few days to see any problem occur again.
If no, try to install software one by one and test it again.
Good luck
blackphnx said:
i tried it and even called my operator.. she gave me some settings which i did but it didn't help.. strange thing is... whenever i change ROM.. like from black shadow to faria... it would work for couple of hours or maybe certain amount of messages then it won't send and remains in outbox.. right now.. i downgraded to WM5 and SPL 1.4 and radio 1.40...
Click to expand...
Click to collapse
Hi again,
I am not sure abut this ROM thing because I use Dutty's v2 ROM and stay with it.
Maybe Netmon's suggestion could be used for you.
If you haven't install anything yet in your PDA yet after a hard reset, you could try these few tests;
a) send sms to your friends
b) ask them to reply your sms
c) send sms to yourself
d) leave the machine up and running for more than 1 hour ( charge it ).
e) repeat the same test (a,b & c) above and see the result.
f) if OK, then your third party software could be the culprit.
Mind telling us what did you install? (for us to indentify and/or see if the problem persist if we install the same as yours)
Regards,
morisa
im using Dopod 838 Pro.. the only appz i have is:
* winsbar light
* tdyscheme changer
* TCPMP with addons
* group sms
* sunnysoft vcard
* SOTI pocket controller pro
* JGUI myCalendar
* mental motions MultiPad
* audio notes
for the meantime those are the appz installed..
btw if you say hardreset that means like format right? isn't it formatted when you upgrade the ROM?..
blackphnx said:
im using Dopod 838 Pro.. the only appz i have is:
* winsbar light
* tdyscheme changer
* TCPMP with addons
* group sms
* sunnysoft vcard
for the meantime those are the appz installed..
btw if you say hardreset that means like format right? isn't it formatted when you upgrade the ROM?..
Click to expand...
Click to collapse
Hi again,
Yess, hard reset=format and when we upgrade our ROM, the machine will be hard-reset too.
The above softwares are add-ons installed after the format right?
Just for a test and for a few days, if you could live with it, do not install anything besides restoring your contacts after the ROM upgrade or downgrade. During the period, test your sms capability and observe any peculiar things with it.
Shall you want to extend your test and to comform your believe that it is due to ROM's issue, kindly revert to your Dopod's WM5 ROM which is downloadable in Dopod website. Then do the same test for the sms.
Shall it be OK then it could be the ROM and if not, it might be something else.
Like myself, I don't have the software as listed by you above installed in my machine and I am using Dopod 838 pro too. I don't have any problem with sms so far
Hopefully you can carry on with the test while I try to see if the problem happens to me if I install the above software like you. Give me a few days for the result.
Regards,
morisa
mmorisa said:
Hi again,
Yess, hard reset=format and when we upgrade our ROM, the machine will be hard-reset too.
The above softwares are add-ons installed after the format right?
Just for a test and for a few days, if you could live with it, do not install anything besides restoring your contacts after the ROM upgrade or downgrade. During the period, test your sms capability and observe any peculiar things with it.
Shall you want to extend your test and to comform your believe that it is due to ROM's issue, kindly revert to your Dopod's WM5 ROM which is downloadable in Dopod website. Then do the same test for the sms.
Shall it be OK then it could be the ROM and if not, it might be something else.
Like myself, I don't have the software as listed by you above installed in my machine and I am using Dopod 838 pro too. I don't have any problem with sms so far
Hopefully you can carry on with the test while I try to see if the problem happens to me if I install the above software like you. Give me a few days for the result.
Regards,
morisa
Click to expand...
Click to collapse
hi morisa! yesterday i downgrade all the stuff back to WM5.. and everything is working smoothly..
i got a sd card installed with previous programs.. but of course when i upgrade everything is erased, the only remaining folder left is Program Files.. do you think this might be one of the cause or should i format my sd card too..
any update guys?
blackphnx said:
hi morisa! yesterday i downgrade all the stuff back to WM5.. and everything is working smoothly..
i got a sd card installed with previous programs.. but of course when i upgrade everything is erased, the only remaining folder left is Program Files.. do you think this might be one of the cause or should i format my sd card too..
Click to expand...
Click to collapse
HI again,
Glad that you manage to get it work under WM5.
Well, not much could be done with the "Program Files" folder in your SD card. You can keep it if you want but make a clean format of the SD cards is highly advisable.
Do not install anything that has interaction with today screen inside the SD card. Always install in memory.
Regarding my test as I said in my previous post, I only install the prog which concerns SMS and no problem so far. (install in memory)
I even go the extend of installing "SMS Scheduler" and Vijay's "Flash SMS", and the result is OK, no problem so far.
Thus, I uninstall O2sms+, Group sms etc which I don't use and back to my old PDA state. No problem too. So, it could be the ROM or the Radio ROM.
By the way, I am using 1.43 Radio ROM.
Regards,
morisa
right now im trying Schaps WM6 3.30.. i deleted everything in my SD card.. didnt installed any apps yet.. all default.. ill keep you posted.. i hope this time it would be all good..
I downgraded my radio from from 1.43.00.00 to 1.38.00.10. It seems like my problem is gone now. Haven't had a text messaging issue in the past 36 hours. Hopefully it stays that way.
wasup people!
after upgrading to Schap's WM6 3.30c.. SMS send/receive is working good (its been 10hrs and no further problems) im using SPL 2.10 Olipro and my Radio is 1.41
the only application i installed since the upgrade is GroupSMS.
i hope there would be no problems..
im now using Schap's WM6 3.30c and everything is going fine.. no more problems so far.. i just format my SD card and everything and installed the new ROM.. i guess when i was upgrading there is a tick box that i should select which says "its hard SPL?" which i didn't select.. and probably that cause the problem.. tho im not sure about it..
link / cab
could someone provide a link or cab for the o2sms plus app you are using on your wm6 roms? at least the version.
UGH
I got the same problem here... this only started happening when I upgraded to Schaps latest rom (4.0 rc). I'm getting concerned that there doesn't appear to be a true or known fix for this problem
dial panel still have some problem
cann't install the third panel,for explam,htc dial
ha,all people can report this rom bug in this Thread
thanx
good job
mun_rus
3rd party Touch Dialer acts the same as it did in WM5,but I installed most of the WM6 HTC apps and they work fine. No PocketMSN,though. Send/receive through activesync is slow and problematic.
3rd dialer also has problem in mine. and the internet sharing also do not work,
it seems to have conflict with the activesync, the two can not work at the same time
Windows Live Messenger Won't Connect
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Mobem CE-Star Problem
another problem in Asia here, i manage to install mobem CE-Star (Chinese IME) on it, but after restart, the touch screen not responding, hardware button not working, but device not hang, still receive incoming call, but no way to answer it...
Could not install certificate
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
riddhwaj619 said:
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=363226
See here all the steps are expained
Strangely I'm unable to install some programs [like Kaspersky, Pocket Mechanic, etc] that were earlier working with WM5 !
shahkh said:
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
Click to expand...
Click to collapse
Device has no root certificates installed & I cannot add any.
As such I cannot sync with my Company Exchange server which requires SSL.
transcriber
transcriber is missing
and often (most of the times) ... when i open anything where u have to type something (eg. sms) then the keyboard soes open automatically.
otherwise its justt perfect!!!
(any idea how do i get my smses in a thread>>>>
thx
Audio booster
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
pankaj4u said:
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
Click to expand...
Click to collapse
I used the booster with TCMP to play flv files. Worked fine.
Unable to use USB sync
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Issue resolved
cooldnkid said:
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Click to expand...
Click to collapse
Dont bother answering. Had to change the settings in activesync on my mobile device...
GPRS
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
GPRS/EDGE Working in MUN_RUS WM6 Rom
^^rac said:
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
Click to expand...
Click to collapse
Yes its work. I am using it now.
Can't record phone call with notes or audio recorder
I've upgraded to wm6 and i've tried to record the phone call but the only voice i hear is mine. In the recording i can hear the other persons voice, but it is so low that i think it's the microphone picking up the sound from the earpiece.
I never tried it to record with wm5, so i don't know if this is specific to wm6 or not.
can anyone confirm?
rexypow said:
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Click to expand...
Click to collapse
Same problem here... any help?
best keyboard ever
For all the key board problems... here is the best key board which you can get in the windows environment..! works amazing with gene!
here is the link to down load
http://www.freewarepocketpc.net/s.php?querywords=touchpal
there are two versions, beginers try version 1.0 . It might find a little wierd at the begining but bileve me its amazing.! i am using it since 4 months..
Dont forget to watch the video in the link , it shows how to use it.
Enjoyyyyyyyyyyyyyyyyyy