Hello PPL,
i dont usually post in the forum but iv got some info for those cookers out there. Got my Touch pro yesterday, been playing around with it. Found some bits with the standard HTC rom Version 1.90.405.1 Radio 1.02.25.19
Wifi- Works fine but gets very warm at top of device (posible power usage problem,Radio)
Bluetooth A2DP- had to change bit rate from 44100 to 48000 (through Adv config)
FMRADIO- works fine but will not feed radio stations through bluetooth headset. Only to wired headset.
TF3D- can be sluggish.... hope you guys can speed things up out there.
Voice Call record-any chance of this in upcoming roms. have heard this is possible on device
Graphic equalizer- any chance this can be modified for Bluetooth Headset.
Landscape mode via shortcuts menu. runs without graphic acceleration. (use TOMTOM 6.030 in landscape. No option to change to this in tomtom program. screen refresh (2fps if lucky) very wiered whole phone slows down until return to home screen which then returns to portrait.
This device is a great platform for you guys to develop your roms on to. Cant wait to see some of your work in the next comming weeks. I hope some of this info is a help to you lot out there
Goodstone
A2DP only works on a bitrate of 48000 it doesnt support other
the fm radio probably uses the wired headset as antenna like the old sony phones. even if one gets it to work through bluetooth it would still be needing this wired headset to receive broadcasts
reply
i thought by having the wired headphones and connected the bluetooth that i would get the volume from radio through to bluetooth but still reroutes to wired.
in regards to A2DP. the playback quality from touch without adjusting value was pretty poor. especially at top range sounds. if A2DP only supports 48000 how comes there is an adjustment on SCHAPS ADV config to change bitrate to 44100.
I have a question, are the wired headphones any good?
Is it possiable for someone to extract the software for the fm radio? Curious to see if it works on the fuze...
....
Wired headphones not to bad to use, earphones dont stay in my ears one of those people with funny shapes ears.
Anyone do you think there will be a fix to the landscape issue because i use my tomtom alot for my job and i like the display in landscape.
cheers
Remember people, Raphael is still in the VERY early stages, loads of stuff should be fixed fairly rapidly, best part of having a PPC
goodstone said:
i thought by having the wired headphones and connected the bluetooth that i would get the volume from radio through to bluetooth but still reroutes to wired.
in regards to A2DP. the playback quality from touch without adjusting value was pretty poor. especially at top range sounds. if A2DP only supports 48000 how comes there is an adjustment on SCHAPS ADV config to change bitrate to 44100.
Click to expand...
Click to collapse
probably the radio application not supporting it.
A2DP should work with 32000 , 44100 and 48000 , but i found out it only works well on 48000 with the blue soleil software i use on my pc.
further investigation showing that the device and rom support all bitrates.
most logitech a2dp devices work well on 44100 joint stereo mode. allmost all nokia a2dp devices use 32000 joint stereo. jabra uses 48000 stereo. sony uses 48000 stereo. the rest im not familiar with. older a2dp devices tend to work better at 32000 joint stereo mode.
goodstone said:
Hello PPL,
Wifi- Works fine but gets very warm at top of device (posible power usage problem,Radio)
Bluetooth A2DP- had to change bit rate from 44100 to 48000 (through Adv config)
FMRADIO- works fine but will not feed radio stations through bluetooth headset. Only to wired headset.
Graphic equalizer- any chance this can be modified for Bluetooth Headset.
Click to expand...
Click to collapse
I'm using SRS Wow HD in ELF, but will definitly give it a try on the Pro.
It works through BT.
And maybe then the BT trick that was tried with having the earplugs connected might work.
Attached you'll find the version i made the with the advanced settings.
As for Wifi what is the default setting in it's power mode?
suppose this works on a wizard also ?
da_jojo said:
suppose this works on a wizard also ?
Click to expand...
Click to collapse
I have a wizard but haven't tried it, been playing to much with my ELF
hehe i would too if i got one ^^
im still waiting for my touch pro to arrive
in the meanwhile i will give the srswow a shot and try it on a friends plain mda vario, since mine allready got the srswow thing.
i'll report back on that one.
We'll i'll be ordering mine on Friday morning so with luck it's in on Saturday.
Def the first thing to install and test can't live without it anymore.
Once your used to Sound enhancements and go back to regular you realise what your missing.
And i never tried the HTC equalizer as it did not support me ST-BT headset.
thanks will try WOWHD tomorrow. default power setting in wifi is best battery. HTC should really work on there software, hopefully there music player should get better with later rom versions. Now using windows media to play audio getting a much better sound quality.
goodstone said:
thanks will try WOWHD tomorrow. default power setting in wifi is best battery. HTC should really work on there software, hopefully there music player should get better with later rom versions. Now using windows media to play audio getting a much better sound quality.
Click to expand...
Click to collapse
Well it wasn't working over the headset it had no effect using the HTC Player.
But then switched to my BT headset and WMP and it's doing it's jiggy.
Also working on the build in speakers using WMP.
Looks like the HTC player is using it's own Audio Driver.
But with the ToiuchFlo3d config tool it gets even better.
I can't compare it to a previous diamond situation though.
For me that's an easy choice. WMP it is then. Gives me one less tab on the Home screen
I'll try the BT Sample rate tomorow.
Touchflo was doing fine barely glitches
Noonski said:
Well it wasn't working over the headset it had no effect using the HTC Player.
But then switched to my BT headset and WMP and it's doing it's jiggy.
Also working on the build in speakers using WMP.
Looks like the HTC player is using it's own Audio Driver.
But with the ToiuchFlo3d config tool it gets even better.
I can't compare it to a previous diamond situation though.
For me that's an easy choice. WMP it is then. Gives me one less tab on the Home screen
I'll try the BT Sample rate tomorow.
Touchflo was doing fine barely glitches
Click to expand...
Click to collapse
WMP is wicked with WOW. iv got to say HTC media player is rubbish.Hope someone tweeks the htc player. i like the graphic interface on it
Related
Just recently bought the iPhono mini BT450Rx to use with my SX66 with WM2003SE. Cannot make all features work at the same time. Here's the story. The mp3 players I'm using are WMPlayer and TCPMP
Installed Broadcom stack 3900 I got "hands-free" and "High Quality Audoi" working, but play/pause/stop/Prex/Next buttons on right earphone wouldn't work. Volume buttons do work.
Here I'd like to notice, that I also have Motorola HT820 BT stereo and its perfectly working with this stack with all buttons, receiving calls and so on. The only problem with HT820 I found so far: if I'm listening mp3 and there's an incoming call and I've answered it without pausing mp3 player, then, after end of the phone call I have to disconnect and reconnect BT Audio device in BT Manager. However, if I put mp3 player on pause and pick up the call, then I can just continue listening.
I tried to change the BT driver and found the one from HP for HP BT stereo, (which I also tried initially, but because it doesn't have "hands-free", I returned it and bought Motorola). It was downloaded from HP site, dont have link right now, but the exe filename is SP3003.EXE. The driver's version was 1.6.0700
Having installed this one I got stereo AND buttons working with mp3 player, but "hand-free" stopped working, probably because the driver is intended for the stereo headphones only, not the "hands-free".
Making some researches I realized, that the part that controlls buttons is sitting in the \windows\BTCeAvIf.dll file. So I extracted this file from HP 1.6.0700 driver, reinstalled Broadcom 1.0.3900 stack and replaced the file above. After all this manipulations, I got hansfree working, able to make calls BUT only to the moment when I connect Audio profile. At this moment I can listen mp3s, control, mp3 player with buttons on the iPhono mini, but cannot talk on the phone. However, if I disconnect "HQ Audio" profile in BT manager, the headset profile gets activated again.
This is pretty annoying, knowing, that HT820 works pretty well without all this tweaks.
Can anybody tell me whether I'm doing anything wrong, or if there's better drivers for iPhono, because I coudn't find another solution so far.
One of the good things with iPhono is it has 4 buttons in mp3 player mode play/stop/next/prev vs HT820 with play/next/prev.
The only thing, I cannot quite understand, since the stop button is also power/(make)answer the call button, how this device is going to determine whether I want to stop music or pick up the phone for making or answering call.
Hi there, I read your thread with a lot of interest cause i have the same problems as you. I purchased the BT450Rx too and had them paired with a Prophet, and I'm the same problems. Actualy, FF/REw works for me in WMP10, but not Pkay/Pause & Stop. Did you have any luck making them work?
TDX
tdx said:
Hi there, I read your thread with a lot of interest cause i have the same problems as you. I purchased the BT450Rx too and had them paired with a Prophet, and I'm the same problems. Actualy, FF/REw works for me in WMP10, but not Pkay/Pause & Stop. Did you have any luck making them work?
TDX
Click to expand...
Click to collapse
I'd actually resolved some issues earlier, wth the exception that I was using TCPMP player instead of WMP and still could not answer the phone while listening to the music.
I was able to use all buttons but on some MP3 files, very misteriously they wouldn't work.
Unfortunately my phone got hardreset because of a deep freeze I coudn't take it out from, so I'm gonna need to reinstall BT again and tweak it again to make headphones work.
I actually love them, and have been using them most of the time, about 4 hours every weekday just for music and audiobooks, despite they suck as a phone headset
Anybody using the SE HBH-DS970 bluetooth headset with the Hermes and if so what is your experience?
Thanks
i use that one waht is your wonder?
I wanted to know if everything works fine and if you are happy with the experience (sound quality, responsiveness, etc.).
I tried it briefly at a store and everything seemed to work except when I received a call I could not hear the person talking. It may just be that I needed to do a soft reset but if I know it is working with the Tytn for someone else I will buy it.
Thanks!
No Good.
1. Sound Quality is very poor even with the A2DP hack. Far from my M600i. It's much better with the original usb headset. so I guess maybe Sony Ericsson has a different A2DP encoding implement or have some tricks on the media player?
2. Only the Call Key and Volume keys work. I don't know if there any PPC music player support DS970's music keys.
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. Only one problem I couldn't solve so far.. it is skipping every 40-50 sec. I am using now original rom from o2 germany. I am going to try imate rom or at least new radio rom. Let see, if it helps
2. All keys are working with native Windows Media Player.
I am using it with PocketPlayer. Works fine with every button. Sound quality is super after the hack. But I got the same problem as SWayf, music got skippy every while...
Multipoint Function with PC Headset profile?
Has anyone tried to pair this headset with a Hermes and simultaneously with a PC that supports the bluetooth headset profile so that it is possible to switch from VoIP (eg Skype) and the mobile phone easily?
Following on my previous post, I now have the headset in hand and although I can connect to my PC and phone simultaneously using the multipoint functionality, the PC connection is only for music playback, ie the microphone is disabled, so I cannot use the headset for VoIP calls. The Bluetooth Service Class is listed as "Audio Sink" rather than "Headset". I don't suppose anyone knows of a way to activate the microphone in this mode?
SWayf said:
1. After registry twiks the sound quality is super.. seems even better than native usb headset.. QUOTE]
wud u please tell that what exactly u did, caz i m new at ppc's
thx
Click to expand...
Click to collapse
Really regret buying it.. Tried the A2DP tweak with the Hermes Tweaker but no luck. Better soundquality but sound keeps skipping every 30-40 seconds, useless for listening to music... I would got nuts having to listen to those skips that often..
Anyone found any tweak to get rid of the skipping problem?
Buttons works fine for controlling Tytn audio quality is ok and I love the looks of it, if I just could get rid of that skipping..
How sick is this! I found this tip on another forum.
Try installing this taskmanager, start wmp and then the task manager, close any apps you don't need to use and then set it to monitor system load.
http://www.iaccarino.de/silvio/ppcstuff.htm
As long as it's running NO SKIPPING so far, have been listening to three full songs so far....
Which of you gurus can figure this one out??? So it must be possible to fix the problem by emulating what this software does??
Any updates on this?
Considering buying one, but wont if there's no fix to the skipping
I've just bought one of these headsets. God, the sound is atrocious. Can someone please fill me in on the hack that was mentioned earlier? I've got the Fit4cat ap on my Hermes but the sound is still rubbish even after adjusting the the "improve BT A2DP sound quality" setting to "excellent". Is this the hack that was referred to earlier or is there another I am not aware of??? Please, can anyone help with this. I feel I have wasted a serious amount of cash on this
http://forum.xda-developers.com/showthread.php?t=284974
This is what you need to read/download.
Hi!
Got hermes and ds970 to work (almost) perfectly
I did this, step by step:
-Hard reset hermes (got o2 xda trion with latest htc wwe rom 1.35 radio 1.18)
-installed ms voice command 1.6
-installed beta version from jetware and their hermes fix
(all files can be found here http://www.jetwaremobile.com/beta.htm don't forget to soft-reset after installation of the "code signing certificate")
-installed a2dpfix
-get HTweakC and set a2dp quality to "medium" do not set it any higher, as the sound quality will be better on medium than on e.g. "excellent"
Configure Jetware Software to show CallerID etc...
Working:
-CallerID shows name!! AND number (alternating) everytime
-A2dp quality is quite good (could be better, but definately very usable)
-Voice command quite usable (still rarely switches back to device speaker)
-very stable bluetooth connection
-remote control of windows media player
not working:
-display doesnt show song title, but i guess we'll never get that on a wm5 device...hope i'm wrong.
Wanna thank everyone on the hermes gps thread...keep up the good work!!
so you can stream media player to the headset too as well as controlling VC1.6? Does VC1.6 fire up when pressing headset button?
Hi!
When I'm listening to music, and press the headset button:
-Mediaplayer goes on pause
-after 2-3 seconds I hear the voice command ding-sound and can say my command. Then hear the lady from microsoft ;-) respond (on long responses the sound sometimes switches back to the device speaker such as when the lady asks me what number-entry to dial and there are 5 numbers in the contact.)
-then switches back to playing mediaplayer for about 2 seconds until the phone initiates the call and then pauses mediaplayer again and switches the headset to the call.
-after the call sound again goes to a2dp and the song resumes playing.
Hope it stays that way...I'll be very very carefull what programs I install.
programs I got installed at this point are:
spb diary
prssreader
navigon mobile navigator 5
google maps (the new not java one)
wakeitup
pocketstreets 2005
tcpmp
clearvue pdf
spb gprs monitor
totalcommander
+the ones mentioned in my post above
(all programs, if not mentioned otherwise, are the latest versions)
oh BTW I tried setting a2dp quality to "low". I can't hear the difference to "medium" and think it will be less stress on the cpu.
what does not work, is also that the announciation of new messages from voice command 1.6 when set to "announce only over bluetooth" still come out of the device speaker.
Hope it works for you, too.
excellent. i'll try these settings. thanks for detailed message
got myself a ds970 and followed your instructions Brevi. music streams brilliantly but i can't transfer calls to the headset,make calls from the headset nor can i get VC1.6 to fire up when i press the headset button. if i start VC1.6 on phone, then i can say command on the headset and that works.
Do you install the JetDial app?
What settings did you configure in the Jetware settings?
any ideas?
i have the "new" btagext.dll which fixed VC1.5 and mono headset - do you think that's the issue?
Update: Aha, i uninstalled the JetDial app (stupid or what) and now everything works except starting VC1.6 using the headset button. i suspect, JetDial has left some reg keys that need removing. No idea what though
Hi! Yeah, you probably need to do a hard-reset to get a clean install of all the little "helpers". I'm confident it will work then.
Tell me if you get the "play reminders only over bluetooth handsfree" option in vc1.6 to work maybe with the btagext.dll. I'm away from my main computer for a couple of days and unfortunately can't mess with my phone till I get back.
I've got some Sony Ericsson DS-HBH970 bluetooth headphones which sound pretty good and are great for the convenience of non- cable tanglingness, and control of playback while the phone is in your pocket.
Problem is that I use coreplayer for listening to music on the phone, and when I use the play/pause, or next/previous track control it's doing it on the built in player in Touchflo, and not on coreplayer.
It's incredibly annoying as it means I can't control the player I'm actually using via bluetooth.
Any ideas how to change this?
Many thanks!
Jim
I'm having the same problem.... Does any1 know how to fix that? Thank you
Same issue with Jabra BT3030.
I tried the advanced control plugin features in CorePlayer, for enabling WMP control support .. didn't worked.
Then tried AVRCP Agent (available on XDA, search the forum), which allows you to send command directly to the desired app (WMP, Coreplayer, GsPlayer)... didn't work either. Looks like HTC hardcoded AVRCP support into their player :-(((
I just hope some of the chefs here will comme with a little tweak...
Edit : It works !!! (see below, post #6)
Fingers crossed as this is mega irritating. Frankly I've been astounded at the quality of the audio on my HTC both via sennheisers, and sony ericsson bluetooth cans, but given that I only use coreplayer, and prefer the bluetooth phones for convenience it's a real pita!
Does any WM guru know how to solve that?
Coreplayer working on TOuch HD with BT3030
I tried again tonight, and AVRCP just worked out of the box : play/pause, next, previous fast forwrd (double press)...
It works with Coreplayer in the foreground, or in the background...
I previously used AVRCP agent, but this time it wasn't enabled (maybe it changed some setting somewhere, and it was not meant to be always opened...). I have TFDetached enabled ; I started Coreplayer from the "regular" Today panel, but it still works when switching to TF3D !
If opened Coreplayer before switching on the BT3030 headset (previously paired).
Settings for Coreplayer :
- HTC Windows Media Player Mobile A2DP plugin : on (ticked)
- HTC WMP control plug-in : off (unticked)
Will try to find if that didn't came from another tweaked, but right now I can't think of something else I would have done...
Good luck guys !
Ace! Will try that AVRCP thingy tonight and see if I can get mine to work.
Thanks
Eyaeeya would you be kind and explain to me step by step how did u do that ? Can you post here the version of AVRCP that you use ? NOOB HERE Thank you in advance!
This must sound really dumb but how do I run AVRCP?I got the zip and ran the exe file from it to install it but nothing seems tohave happened.
Sorry for being dense!
Well, I've had AVRCP running for a bit now but I just cannot get it to control Coreplayer by bluetooth instead of the headphones controlling the TF3 player instead.
There must be LOADS of people facing this problem since Coreplayer is near enough a staple application on winmo phones.
What am I doing wrong?
Still no-one?! Surprised by this.
Does no-one use bluetooth + coreplayer besides me and eyaeya?
I'm looking for the same fix too!
has anyone tried to go into coreplayer options(or tools)??? --- I saw somekinda option in plugins "windows media player control" or something like that, see if that helps!!!!
eyaeya said:
I tried again tonight, and AVRCP just worked out of the box : play/pause, next, previous fast forwrd (double press)...
It works with Coreplayer in the foreground, or in the background...
I previously used AVRCP agent, but this time it wasn't enabled (maybe it changed some setting somewhere, and it was not meant to be always opened...). I have TFDetached enabled ; I started Coreplayer from the "regular" Today panel, but it still works when switching to TF3D !
If opened Coreplayer before switching on the BT3030 headset (previously paired).
Settings for Coreplayer :
- HTC Windows Media Player Mobile A2DP plugin : on (ticked)
- HTC WMP control plug-in : off (unticked)
Will try to find if that didn't came from another tweaked, but right now I can't think of something else I would have done...
Good luck guys !
Click to expand...
Click to collapse
for me it works not....
i follow the settings above, but still WMP would be launched be pressing a button on my BT Headset
any solution?
this works!
check out this on
http://forum.xda-developers.com/showthread.php?p=4749697#post4749697
works 100% with Coreplayer
Cheers mate - installed that and rebooted etc but it's still not working with Coreplayer.
It's stopping WMP from using the control but it's just not doing anything with coreplayer.
I've posted on that thread anyway.
Thanks for the link
I've finally given up on CorePlayer. The latest version of Pocket Player 4.1 solves all of my Verizon HTC Touch Pro + Bluetooth problems.
Thanks to Pocket Player 4.1, I now have:
1. Full control of all of the buttons on my Motorola HT820.
2. Lossless flac and ape support.
3. A boost in volume. I set the default equalizer with the pre-amp at its maximum. With a press of a button on the headset, I can boost volume so that it is suitable for freeway speeds.
4. A persistent current playlist.
Goodbye CorePlayer. Don't let the door hit you where the good lord split you.
did anyone ever make progress on this? I need coreplayer for the .mp4 video functionality. I cant find any other player that play is (TCPMP is to laggy).
Hi, so my TG01 has really poor sound quality. I mean I have W960i and there music has nice and deep bass and it's nice and loud, and here the bass is like on poor quality video on youtube.. also when I make it lauder it does a lot of clicking on the background.. I tried few player and MortPlayer gives me best sound quality, but summing it, it's still poor If a comapre it to Sonny E.
Maybe it's sound drivers or somethin ? IM TALKING ABOUT SOUND IN HEADPHONES. I'M USING WM 6.5 FFBOYS 1.0.
pawel5510 said:
Hi, so my TG01 has really poor sound quality. I mean I have W960i and there music has nice and deep bass and it's nice and loud, and here the bass is like on poor quality video on youtube.. also when I make it lauder it does a lot of clicking on the background.. I tried few player and MortPlayer gives me best sound quality, but summing it, it's still poor If a comapre it to Sonny E.
Maybe it's sound drivers or somethin ? IM TALKING ABOUT SOUND IN HEADPHONES. I'M USING WM 6.5 FFBOYS 1.0.
Click to expand...
Click to collapse
Yes, sound quality has never been strong side of TG01 but maybe You should consider to utilize WOWHD. It works like some kind of DSP so You should
see any difference.
Regards
fxdjacentyfxd
ok got it, but now gettin a message sain @There is no WOW HD driver loaded. The control panel will now [email protected] how should I fix this ? I duno how to edit the registry btw thx
1. go to your "windows", search the file with "wavedev" as part of name.
2. copy the whole name.
3. go to [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] and set the "OldDriver" to STEP 2.
4. reboot.
Firstly I can not find this file, secondly I duno whats hkay_local... and how to access it please explain it to me
pawel5510 said:
ok got it, but now gettin a message sain @There is no WOW HD driver loaded. The control panel will now [email protected] how should I fix this ? I duno how to edit the registry btw thx
1. go to your "windows", search the file with "wavedev" as part of name.
2. copy the whole name.
3. go to [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] and set the "OldDriver" to STEP 2.
4. reboot.
Firstly I can not find this file, secondly I duno whats hkay_local... and how to access it please explain it to me
Click to expand...
Click to collapse
The file is probably hidden; you need a File Explorer which is able to 'see' hidden / system files (the native windows explorer in Windows Mobile only shows you ones which do not have the -h (hide) attribute set).
The reference to HKEY_LOCAL_MACHINE (often written in short as HKLM) is a 'Hive Key' in the Registry. This works just like the Registry on a desktop PC and contains all the variable settings for the system and all the applications you have installed. To access this and edit its contents you need a Registry Editor.
One option which does all in one package is the Resco File Explorer (Payware); alternatively you can search on XDA and there are various alternative offerings available with differing capabilities.
Hope that helps clarify....
Back to the original issue behind this, though and I would observe that actually the sound quality out of the TG01 is in fact very good - but you will only hear that with a high bitrate audio source and a decent set of earphones on the end to do it justice, or alternatively by output to a high quality external amplifier via quality screened cable and connectors. The stock earbuds (or similar) will never give you good quality sound. Addition of SRS or equivalent software will only modify the perceived sound, but can never overcome the limitations of such hardware. I've included the spec for my audio setup in my sig below - I'm using .wav encoded audio so it is 1:1 CD quality with no compression whatsoever - as soon as you start using compression (MP3 or similar) the audio quality will be degraded.
well ur answer does not help me. I do use resco explorer.
And how can u say quality is good ? ;d there is a lot of cliping etc quality is so poor that my casete player would give me better output. well I do have good quality headphones pionier make that reatail over pounds. my MP3 files sound awesome on my PC or Sony E. and TG01 just can not handle this level. That's why I'm loooking for anyway to fix this issue and I need this WOWHD as it might help. anyway I got it working but it gives my no audio output 0.- help.
Tried an active set of headphones or a portal headphone amp?
I did not tried amp, but I will no spend any more money for this, jsut want to manage WOWHD to work. I has it working and after editing registry entries my phone does not swich music to headphones, and when answering the phone it can only use speaker, and the micro does not work ;/ too bad help.
Well I just happened to have my headphone cable on me today at work. I have a set of noise cancelling headphones here at work and I don't seem to have a problem with 'clicking' except perhaps between songs when it actually changes track. Whilst not being loud, it sounds ok to me.
Are you using the original headphones that came with the TG01? They suck. Change them for something else and see if that improves things.
Also.. I wonder if the 'radio' version has anything to do with it?
As I said before HEADPHONES HAVE NOTHING TO DO WITH IT. I USE PIONIEER HDJ1000 AND I WOULD SAY THEY ARE REALLY GOOD. I tried others as well and the best sound i get on pionieer. but it's still not good at all. Bass sounds like a cheap imitation of bass. and as someone said I could cry WOWHD as it worked for few people giving a bit better sound, so jsut want to try it, but can not get it to work, got this frustrating error @ no WOW HD driver loaded .. And i have no idea if radio version has anything to do with it, I hope you guys tell me that Thanks
You could always try another ROM that already includes WOWHD in it? (Look for the MiROM 8 + UPX compression ROM )
I know that's a bit extreme to do, but you have already flashed your phone with FFBoys.. so it shouldn't be that much of an issue. (use PIM Backup to record your contacts first!)
It could just be that the SE phone has better dedicated hardware as many of them seem to be made with music in mind.
Ok downloading new ROM. I have tried many ROM with no change on audio quality I hate Sense but just wanna try this WOWHD software and see if it's worth using, then I'll go back to old FFboy's ROM, and yes I also think that Sonny E. has better hardware as it's Walkman phone, and that's always been known as good thing.
pawel5510 said:
Ok downloading new ROM. I have tried many ROM with no change on audio quality I hate Sense but just wanna try this WOWHD software and see if it's worth using, then I'll go back to old FFboy's ROM, and yes I also think that Sonny E. has better hardware as it's Walkman phone, and that's always been known as good thing.
Click to expand...
Click to collapse
... TG01 with 9,9 mm was for a long time the thinnest smartphone.
....thinnest smartphone= thinnest loudspeaker= poor sound
... but i love it ...
Allegedly Phantasm X3 is the music player that gives the best sound quality on windows mobile, but good luck obtaining a copy even legitmately.
As mentioned, have it might be worth while trying a different 'radio' with the rom, as if it can effect call quality, maybe it can affect sound quality as well. Which country are you in?
I'm from England and I don't really think that where I leave has anything to do with, the quality of sound. The hardware isn't too good it does not support 320 sample rate
But guys I do have sound that can be accepted, it's still not good, but there is not clicking ans stuff. I have installed miRom8 with WOWHD already intergrated.
I will stay with it, because it runs quite smoothly and many functions that are useful. AND MOST IMPORTANT SOUND IS BIT BETTER.
thanks for help
I've tested a lot of Roms and I have a couple of TG01 : Sound quality it's always the same. It's hardware related, not software.
Said this, sound quality it's average. Using device speakers is quite poor (perhaps due to the thickness, as said before) but with headphones it's not bad, even good in my opinion
And if you use a pair of good headphones and SRS HD switched ON, sound it's superb
Instead, nobody says nothing about voice record quality. Its awful, the worst record device I've never heard . Do you agree?
Hi I am new to this forum. I used Touch and Kaiser in the past.
Have been using TG01 for a few weeks and love it.
I am trying to use it as a music player via stereo bluetooth headset, using coreplayer and in mp3 or wma format. The quality of sound is awful. Then I change the music format as flac which is a lossless format and improves the quality a bit. But the human voice is like a digital nature, worse of all, still not much bass. SRS HD helps a bit on the voice, but not the bass (I have to admit my headset is not a very decent one)
Two questions:
1. I understand a quality headset will definitely improve the bass quality, does the bluetooth transmission limit the bitrate or sound frequency?
2. Any recommendation on the tweak, media player or setup?
ccm081 said:
Hi I am new to this forum. I used Touch and Kaiser in the past.
Have been using TG01 for a few weeks and love it.
I am trying to use it as a music player via stereo bluetooth headset, using coreplayer and in mp3 or wma format. The quality of sound is awful. Then I change the music format as flac which is a lossless format and improves the quality a bit. But the human voice is like a digital nature, worse of all, still not much bass. SRS HD helps a bit on the voice, but not the bass (I have to admit my headset is not a very decent one)
Two questions:
1. I understand a quality headset will definitely improve the bass quality, does the bluetooth transmission limit the bitrate or sound frequency?
2. Any recommendation on the tweak, media player or setup?
Click to expand...
Click to collapse
Try a different music player, S2P is good, and you can use the music player while the screen is locked.
As i said earlier Phantasm is the best audio player available for winmo, but i have never used it.
I don't think SRS WoW HD will really help too much to be honest.
Hi to all!
I've noticed very poor audio quality while streaming music over bluetooth on my Xiaomi Redmi Note 3 Pro(on MIUI7 and MIUI8 too). No matter is bluetooth connected to car or BT earphones. Volume level adjustment or EQ adjustment doesn't help. It looks like low bitrate of sound - a lot of distortion of high frequencies. If I connect wired earphones - music quality is very good.
Could someone help me to fix it? Thanks.
try ViperFx
afoninpe said:
try ViperFx
Click to expand...
Click to collapse
I'm not sure that it's problem of audio driver, because as I wrote in wired earphones(or wired to car) quality of sound is very good.
Looks like problem of BT stack. I found one solution to increase sound bitrate for A2DP by editing audio_policy.conf, but unfortunately it didn't work for me.
My bt headphones work fine, (awei, bluedio), and recivers (linkz, ibt,ihome), I am on MM miui 6.8.15, try turning off any 2ghz radios (like wifi routers or switch the router to use to 5ghz only) maybe it's interference.
I'm having the same issue, using bluedio t2s, sounds like the phone loses connection for a millisecond, even though I have it in my pocket or in my hand. I've tried different Roms and kernels, but the issue persists.
otyg said:
My bt headphones work fine, (awei, bluedio), and recivers (linkz, ibt,ihome), I am on MM miui 6.8.15, try turning off any 2ghz radios (like wifi routers or switch the router to use to 5ghz only) maybe it's interference.
Click to expand...
Click to collapse
Unfortunately, turning off all except BT didn't help for me...
As I understand, you use China Developer ROM, aren't you? Could you send me(or attach here) some files from your ROM? I'm interested in:
/system/etc/audio_policy.conf
/system/lib/hw/audio.a2dp.default.so
/system/lib/hw/bluetooth.default.so
Thank you!
Problem has been resolved.
I improved audio quality over BT only when I switched to Global Developer firmware & updated my phone to android 6.0.1.
Then I used patched libraries from this thread of MIUI forum .
This libs really works great on it.