Hello
I have HP6815 stand up there now WM5 the company where I work now uses novell with groupwise Gladly I want uses now WM6 am use it possible then with WM6 with novell and am possible I thus sync with groupwise. and WM6 on the forum I can use which then.
Sorry for my english
Thanks
Related
Ok here's my Problem,
I upgraded My SX56 from PPC 2002 to WM2003, not minding the changes at first, and liking some of them, untill I got home from work that night and tried to reload the driver for my folding Keyboard, and the AOL Instant messanger 2.0. It was then that I found that WM2003 did not support these. Does anyone know of a program that would make these as well as other 2002 apps compatible with WM2003?
I gave up and went into an AT&T store and used a display SX56 to write the Original ROM to my MMC card and then uploaded it back to my SX56. So now I'm back at square one again and I'd like to be on WM2003, but I can't sacrifice my apps to do so. :evil: Can anyone advise? Any help would be greatly appreciated! Thanks all!
[/i]
Re:
i might have a answer for your Aim problem as i use a ipaq 38250 too with WM 2003 in addition to the SX-56. i found that installing www.aol.co.uk did the trick for me
Isn't this the same aim 2.0 that I have? I think it is, and it won't reinstall after the upgrade to WM2003.
it worked for me and im running both the same version of WM200 on my ipaq and my sx-56
Where did you get your WM2003 upgrade? I got mine at My Siemens.com I wonder if you have a different version because when I try to install it using activesync it says it will only install when a compatible device is connected?
hmmm i used that upgrade too plus cooked roms and it worked fiune for me.
well thank you for you're info, maybe if I can get some info on the keyboard driver, i will upgrade to wm2003 again and try out that aim version. I appreciate your help man.
Phil
Oh hey, what version of active snyc are you using, I'm using the one the SX56 came with, maybe that's the problem? Or the windows version you're running on you're pc, Im on XP?
dunno, it works for me i even copied it over from the IPAQ without sintalling it and i get on just fine
The keyboard driver available in the kitchen works well for me, you must remember though that it initialises com1 automatically and needs to be disabled before using serial gps, this resets to active also after every soft reset.
hi i have sucessfully upgraded my Hima into WM 5 but it does not have the MMS feature like the previous ones. can nene of you guys assist me on this problem? :?:
ms never supported it
3th party programs just intergrated with outlook
but those 3th party programs from 2003SE and 2003 dont work anymore
so people have to wait for new versions which does work with 2005
no known solution yet that i know of
hi,
I'm new in this forum.
1st of all i beg your pardon for my english, cause I'm Italian =)
2nd i have to thank all of you for this site, which made me possible to have WM05 on my mobile
and 3rd i've got a problem:
i own a Pocketop original keyboard wireless (IrDA), which is designed to work with ppc or ppc 2002 devices... can't I change the driver, the cab or whatever, so that i can write with the keyboard?
tnx a lot
Try this -
Found this on another thread - it worked for me, so maybe you'll have the same luck. A curse on those weasels at Pocketop.
http://forum.xda-developers.com/showthread.php?t=224108
Does anyone have a CAB of Windows Live that works with WM6.1? I really like 6.1 but I need to be able to sync my hotmail. The CAB I have that works with 6.0 installs on 6.1, but doesn't do anything when it is launched under 6.1.
I would be interested to understand why both 6.1 ROMs have removed Windows Live from the builds. Is there an inherent incompatibility?
Thanks in advance,
Mike
Found it Here
http://forum.xda-developers.com/showthread.php?t=358660
This is a cab file that will install the Samsung i8000 chinese hand writing support.
I've been using Touch HD for some time. updated to WM 6.5 and found Chinese hand writing support are not as easily compatible as WM 6.1.
(was using kuma chinese support, but found this and loved it. This is compatible with Touch Input-big keyboard without any registry editing!!)
Simplified AND Traditional Chinese Support including Hong Kong Words.
Please note that this is only the input method, I would suggest to install chinese fonts of your liking from "Ricky's Universe"!
cannot upload to xda, please Download from below.
<a href='http://www.mediafire.com/?qnzzznnudzn'>Download from Mediafile</a>
界面难看。 frown
确实难看
确实难看确实难看确实难看
x1 change to wm6.5 can use thanks so much.
thanks a lot 灰常感谢
Does it work on HD2 ?
vga screen用到呀，不過佢好似有啲問題，藍色嘅筆跡會縮咗上去~~
国人不少..........
other chinese stuff
hi guys come here and u will find all that u need chinese support impt and hand writer
朋友们这里都有你们自己看看
http://forum.xda-developers.com/showthread.php?p=5188199#post5188199
多謝晒
works well on my diamond2 :]
works like a charm!!! I like the layout and how easy it is to switch between full keyboard and handwriting~ Just slide right or left to change input method and slide down for full screen Big thanks to the person who's sharing this!
thx
I have a friend who is using diamond 2 ,but his mobile is from 1010 nextG and it is english
He know I know more from wm and he told me he want me to help him to find the hole pack of traditional chinese transform for him
I want to know can it use with my a3100 wm 6.5.3 rom
Samsung Omnia II
By any chance anyone know if Samsung Omnia II wi WM6.5 can support
chinese handwriting input for both traditionally or simplified character?
Thanks a million
This is actually what I have been looking for... who said WM supports is not as good as Android..