Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
You have this info on the Wiki...
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
The Wiki is our friend
Cheers
Press :
Vol Down Button + Center Round Action Key + Reset Hole
> Prompt > Vol Up Button > Finish > Vol Up button.
Hope this help.
Lanyz said:
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
Click to expand...
Click to collapse
Press volume buttons (inferiors) and soft reset at the same time.
When the screen go to about bootloaders still soft reset and "prays".
Bye
Many ppl trying to help
i love this forum...
I just solve it... Thank you for your advices..
Standard hard reset (Vol down + Center button + REset) didn't work - device must be on.
I tried this - Vol down. + Center button and turn on the device, that worked.
Once again thak you.
jcespi2005 said:
Many ppl trying to help
i love this forum...
Click to expand...
Click to collapse
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
hang.tuah said:
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
Click to expand...
Click to collapse
ey man, don't care about it... this is just for fun, you know...
Cheers
i just want to thank everyone who participated and answered this.
i almost ****ted a brick a few min's ago..
my device just stopped working it was real weird.. All was fine then i get a error msg saying that "Gyrator has encounterd an error" and BAM black screen. and no matter how many soft resets and batt pulls nothing worked.
so i immediatly signed on here..searched for about 30 seconds and with the 3 key press..all was good..device booted properly, configured itself, and im back on track.
Thanks,
Jstar
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
scaz24 said:
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
Click to expand...
Click to collapse
You need to get out of the GSM rom forum and go to the raphael CDMA forum. Anything you try to flash from here will not work on your device and my brick it.
http://forum.xda-developers.com/forumdisplay.php?f=465
Until you understand the difference between the two standards you shouldn't be flashing anything, as it will not be safe.
Related
Complete noob here.
I was installing the HTC Home Customizer on my new HTC Touch Pro phone and there was a problem with the installation that caused me to reset the phone. Well, now the phone won't reboot!! It hangs right after Windows Mobile 6.1 loads.
How do I fix? Can I reinstall WM6.1, or can I flash a ROM? All information I've seen for doing this requires ActiveSync to be working. I can't get the phone booted far enough to get it ActiveSync to work.
Please don't tell me I've bricked my phone!
Can you at least attempt a hard reset?
LordLugard said:
Can you at least attempt a hard reset?
Click to expand...
Click to collapse
Do you mean, yank the battery out and then reboot? If so, yes I've tried that.
Okay, I found the wiki explaining what a Hard Reset is.
Negative. Holding VOLUME DOWN and CENTER buttons while RESETTING the phone does not help. Still locks up immediately after you hear the tone played at the Windows Mobile Boot screen.
Other suggestions?
Looks like I forgot the part about holding the Power button while doing a Hard Reset.
Doing a Hard Reset correctly, did fix my problem. THANKS GUYS!!!
ignisuti said:
Looks like I forgot the part about holding the Power button while doing a Hard Reset.
Doing a Hard Reset correctly, did fix my problem. THANKS GUYS!!!
Click to expand...
Click to collapse
Ah ha, you owe me LUNCH !!!
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
have you tried installing a new SPL via storage card (rename spl file to RAPHIMG.NBH and place it on the storage card) and enter bootloader mode by holding the vol down button when powering on the device?
the problem is
i cant start bootloader
nothing is working
I think you got yourself a brick...
Does it at least vibrate?
Run SPLExploit!
Dude, i have the same problem with you too but its not my TouchPro but its my old school Dopod D810. I flashed custom rom (my home cook) but forgot to add sumthin and finally i learned somethin that i can ****up my phones LOL. Just like what i thought my phone wont start and it refuse to enter on Windows OS but atleast bootloader mode still accessible. Thanks God
I search for post how to recover bricked phone (ofcourse on trinity room) and found some tools call "SPLEXPLOIT" it runs on DOS Mode. This program can erase your nand memory which in this case you flashed the wrong SPL and will rebuilt some bad Nand memory too. Good tho
I finally can bring my dead dopod came to life (for almost 1 year i left it on garage) lol. Just asked cmonex! maybe he can help you...
If this tools works universal i'm sure it will worked on TP too! Just asked cmonex for more details...
Run SPLExploit (as Administrator) --> while Enter in Bootloade mode -->
Just make sure that USB Cable was recognized as "USB" on the bottom of the screen not "Serial"!
When its done ....
NOTE: "Dont Soft Reset the phone even when SPLExploit ask you to SR the devices" just go ahead straight away flashing new custom rom or anything you want
Goodluck!
The OP can't get into bootloader, because the bootloader is corrupted/dead. So that isn't going to work.
JTAG is the only way to fix it, and as far as I know, no one knows how to do it on a Raphael.
Maybe playing with BIOS ( if BIOS can be accessed ) might help.
But BIOS can really make ur brick a worse brick if done wrongly please ask for help from the senior most members on Raphael forums.
And request them don't order them.
And if nothing works * I love to say this line *
You Just got Yourself a New Shiny Fine Edged Black Clear 600 U.S. Dollars worth Of a BRICK ! Enjoy !
atjee said:
the problem is
i cant start bootloader
nothing is working
Click to expand...
Click to collapse
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
iugalde said:
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
Click to expand...
Click to collapse
That is the only way to go to bootloader but as Farmer Ted mentioned his phone ( including bootloader is dead ! )
So i don't think there is any way out for you except if any really senior members can help you with bios or pump in something which starts your bootloader !
atjee said:
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
Click to expand...
Click to collapse
Dude, you might try to PM cmonex. I hear she can do miracles. You can check out this thread and see a miracle there. Who knows? See what can be done. This link will take you to her contact page: http://forum.xda-developers.com/member.php?u=322932. Best of luck to you my friend. Worst case scenario, sell it for parts. Several people around here are always looking to replace "stuff", including me .
the same problem
I did the same thing to my HTC Fuze aka rafael or touch pro, from some reason it was the same thing as diamond and i flashed wrong spl and completely bricked it, no bootloader no nothing. So i went to a service and they said it was a hardware problem so they had to send it somewhere else to be fixed. It took them 3 weeks to get the phone back, in not working condition saying that motherboard was dead. I guess thats what happens when you flash wrong stuff... Now i dont know what to do either. I would like to sell mine for parts if someone is interested or if someone know how to use jtag i would pay him to try to fix it...
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Thank you for the advice.
Thanks for help
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
fantomel said:
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Click to expand...
Click to collapse
elder T said:
Thank you for the advice.
Click to expand...
Click to collapse
bassam777 said:
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
Click to expand...
Click to collapse
DeeJay05 said:
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
Click to expand...
Click to collapse
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
drupad2drupad said:
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
Click to expand...
Click to collapse
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
olyloh6696 said:
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
Click to expand...
Click to collapse
yea it erase the nand flash like a format and the the drive is real clean and only toshiba logo is displayed
shahryarkh said:
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
Click to expand...
Click to collapse
read this:
tg01 two brick variants how to unbrick
and do this:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
* if red led not flash- use TG Downloader unbrick method with user manual in german (pls translate with google translator for other languanges)
contains: TG01 Downloader TG01 Driver TGTool
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
Click to expand...
Click to collapse
If a soft reset doesn't work then hard reset, hopefully you installed from a fresh rom flash/hard reset anyway?
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
Click to expand...
Click to collapse
tf3d never causes me any of these problems, what ROM were you on?
Thank you
... this saved my Day.
I wasn't able to do a Master Reset after Flashing.
OK, so after trying out the last android build from Markinus, winmo is now saving text messages to the SIM.
If I do a 'hard' reset, what will I lose on my phone? (contacts/texts/email setup etc??). Please explain the downside of hard reseting. Thanks! (or basically.. will I need to save/backup anything before hard resetting?)
Also: Will it remove the 'unlock' that I have applied to my phone?
Update: Well I did it anyway. Saved my contacts, but that's about it lol. Hopefully this will get my messages to saving back into memory rather than onto the sim.
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
SSPL? Aren't you supposed to use the HSPL?
jamesmbaldwin said:
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
Click to expand...
Click to collapse
As far as I know the "void" thing below the battery is correctly in place. If it was missing - then your warranty would be void.
I would put your phone into bootloader and flash a stock rom.
If you have a european phone check this http://forum.xda-developers.com/showthread.php?t=609477
If you have USA phone check here http://forum.xda-developers.com/showthread.php?t=653614
Your phone is not bricked, you should be able to reflash back to a stock rom. To flash a custom rom you should use Hard-SPL, if you do this make sure you pay close attention to the directions, because a long time ago I bricked my wizard because I didn't pay attention to details
http://forum.xda-developers.com/showthread.php?t=606713
And if you have T-Mobile USA 1024 version:
http://forum.xda-developers.com/showthread.php?p=6004691
Fixed my Aussie T9193
Hi, thanks all for the responses, I've gotten it working! I didn't know about getting the phone into bootloader mode FIRST, then doing the installations. BIG help, thanks to the collective wisdom!!
JMB
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
post in the ozrom thread then
lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
did you check your radio and did you use hspl ?
djchubbs said:
post in the ozrom thread then
Click to expand...
Click to collapse
Wrong radio!
I bricked my phone after using "Task 29"... PLEASE HELP!
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
starr073199 said:
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
Click to expand...
Click to collapse
Just hold the volume down button and then press the end call button instead of both the volume buttons...
garavd said:
just hold the volume down button and then press the end call button instead of both the volume buttons...
Click to expand...
Click to collapse
omg!!! I love you!!!!! Thanks sooooo much!!!!
possibly bricked hd2? any help!!??
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
articulatekevin said:
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
Click to expand...
Click to collapse
try turning on holding volume down push power and then plug to pc wait for usb to appear on phone screen and do task29 and than reflash your favorite rom again..... good luck!!!!!!!
So I just got my HTC HD2 yesterday and I've been trying to personalize my ringtone, text message, etc. and then came across the "Themes and Apps" section. I looked through it, read some stuff and noticed that I could customize my HTC HD2. Wanting so, I went ahead and downloaded some stuff and dragged and placed it in my HTC HD2 and installed it. Then wanting to remove some of these themes and apps, I did. Then once I was asked to restart my phone it loads up the "stick together" banner and comes up to this orange "windows" screen and just freezes. Can anyone help? I am totally new and don't know what to do. Thanks in advance.
P.S. Once in a while, after the orange "windows" screen, it takes me to another screen saying "The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from a untrusted source. Press the Volume Up to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings." Is there anyway to fix this problem?
not sure if u want to go to through methods that "serious" but wipe and if nothings wrong afterwards u learned ur lesson; if not and still has issues; hit me up
s0xpan said:
not sure if u want to go to through methods that "serious" but wipe and if nothings wrong afterwards u learned ur lesson; if not and still has issues; hit me up
Click to expand...
Click to collapse
Thanks for replying. But I have a question, how can I wipe if I cannot get into my Home Tabs, Settings, etc? I've been searching and others were talking about Soft Reset and Hard Reset, but how is wiping possible if I cannot get into my phone? Sorry and thanks for your help, I'm brand-stinking new to this.
solution
press vol up + vol down + power button simultaneaously and restart your phone, a menu will appear asking you to restore to factory settings... tap yes and there u go , evthing would be back to normal ...
flash new rom; y not just move over to android side; and flash spl then radio then custom winmo w/ android
i'd give a step by step method to do all that if i remembered uhmmm need any help i canroute u to the right people
hasnainhyder1 said:
press vol up + vol down + power button simultaneaously and restart your phone, a menu will appear asking you to restore to factory settings... tap yes and there u go , evthing would be back to normal ...
Click to expand...
Click to collapse
Thanks, but when it came to that "press volume up part" I held the volume up button and it restored it! Thanks for replying. :]
s0xpan said:
flash new rom; y not just move over to android side; and flash spl then radio then custom winmo w/ android
i'd give a step by step method to do all that if i remembered uhmmm need any help i canroute u to the right people
Click to expand...
Click to collapse
Yeah, I've been looking at the android, but I don't want to mess up my HTC HD2 again, and when I was reading through the "guides" and "tutorials" of the android, it went through one ear and out the other. Had no idea what people were talking about, haha. But in due time, but if you don't mind simple-ing it down for me, I'll put in the effort of going over to the android side.