hii ,
ok i have atom life with a wm5 pre-installed in my device when i downloaded the Xda_Atom_Life_WM6_WWE_RC2140907B2 from www.seeo2.com , when i begun to flash it gives me ID ERROR , it tells me that the rom is not for this device , as i have atom life .
how i can solve this problem , is there a bypass CID Check ? or there is a problem in my device .
I have flashed the rom via sd , but i want it from the update utilty as it is better and can flash the radio image .
srry for my bad english , and i wil be very happy if u helped me
Hi,
You should see these posts and see how we got troubles with flashing by DSUU.
http://forum.xda-developers.com/showthread.php?t=428398
http://forum.xda-developers.com/showthread.php?t=350776
Bypass CID check is easy but so dangerous.
Pls read carefully b4 deciding to flash via cable.
B.rgds,
i am very thank ful
dear vosa
i want to upgrade to the windows mobile 6 , not to downgrade and from usb so that i get benefits from the radio and OS and ext rom .
is there a way to falsh the radio from SD ?
Hi kosomkeda,
I already seeked for a way to flash radio via SD but no have.
Now, i'm using my Atom as a PDA only.
R.gds,
as a pda :|:| u meen no calls and no camera andno wireless??? !!
why dont u try to flash it via usb does it gives u the same eror? thankz
vosathanh said:
Hi kosomkeda,
I already seeked for a way to flash radio via SD but no have.
Now, i'm using my Atom as a PDA only.
R.gds,
Click to expand...
Click to collapse
I remember reading this quite sometimes ago, so i provide no gurantee that it will work or even brick your device. but here goes
1. when u run the orginal update files, the content of the updates will be extracted to \Windows\Temp\
2. Remove the first 12 bytes of FLASH.DIO, save it, and rename to AL1.DIO
you then can try to copy it off to your miniSD card, then restore it.
Maybe, Medkid or other atom life ROM cookers here can help me out here pls
Good luck.
kosomkeda said:
as a pda :|:| u meen no calls and no camera andno wireless??? !!
why dont u try to flash it via usb does it gives u the same eror? thankz
Click to expand...
Click to collapse
Hi kosomkeda,
More than a pda my friend. . Can use everything except recognizing Sim. Imei lost. Sim no showing (It shows no Sim). (cannot repair so far.)
To : imatrix,
Thank you for your advise. I already tried all ways but failed. Now, in my opinion, only German ROM can help (the full DSUU, not only OS and exrom).
Thank you.
mmmm
maybe if i knew the name of the radio file i can try to flash it via SD , what is the name of this file in the temp folder when i extract yhe dsuu ?
bst.rgrds
I really don't know. But when flashing via cable, only three steps appearing on the PC's screen :
+ 1st : Writing OS
+ 2nd : Writing Extended Rom
+ 3rd : Writing Mot (stage 1-8).
I think the 3rd step is the one relating to Radio, but really don't know what file it is.
R.gds,
Related
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Please anybody can give me a step by step info on how to copy the original rom to SD card, I need to change language from german to english and I want to keep the original german rom just in case. Thx
Does it have to be on sd there are other way of doing it which I will be able to talk you through (I think) if you need a hand
Well I was thinking to flash it to the sd in case the phone goes dead and you're out of activesync so the only way of flahsing it will be through SD. But another way of flashing is more than appriciated so I'll be waiting for ur guide.. do u happen to know why I can't see the options in the bootloader? thanks really
1st ... I have no idea why you cant get into the bootloader. On my xda 2 after a cold reboot i just get the serial and then when in the cradle I get usb, from their I dont know what to do. I would class myself as a newbie as well but I can talk you through what I did.
Which rom is it that you want to flash?
The extended rom or the Os rom?
i'm willing to flash the OS rom and not the extended. My version is 1.03.00 Ger and I want to flash to the "Dangaard (Qtek) 1.60" or RUU16006WWE_T-mobile_NL version which is an english one although I heard some people had their phones dead while doing so. I must find a way to back my rom 1st.. Did u do the update urself??
Yes I did the update using a programme called
HimaUpgradeUt.exe
I was originally after flashing the extended rom only, but due to not fully understanding the instructions at
http://forum.xda-developers.com/viewtopic.php?t=6470&highlight=
I made a mistake and flash the Radio Stack - the OS and the extended rom as well. After this I worked out how to use HimUpgradeUt.exe to flash the extended rom only. I am guessing that if you follow the same procdure for flashing the rom and flash the OS you will get the same results.
However I haven't tried it yet. I am hoping to get the radio rom and the OS rom for O2 xda2 and try it but until them I cant confirm it. I am only guessing that it will work?
So its up to you I have successfully updated the extended rom 4 time but I just dont have the files to do it?
Where did you get you Os file from?
I already tried Multi-Port/USB TTY program , but in the instructions it says"
3. boot the machine into bootloader mode (hold the Power and directional pad , then push reset)
4. Run the rompdate utility, select the comport as "wceusb001" or something like that as the default comport." The problem is that After going into bootloader mode I launched the romupdate utility but in the com-ports I only see com1 and com2 ,there is no wceusb001!!. And where did u see the d2s that I hear about??
I've got the downloads from the forum this one http://forum.xda-developers.com/viewtopic.php?t=6214&sid=0dad85b97d280219dc51962a01a4997b and the other form here http://shop.store.yahoo.com/cellpoint/tmobilemdaii.html
It seems that we are taking cross purposes here.
Using HimaUpgradeUt.exe you can update the roms using .NBF files,
hence the way in which I updated all 3 of my roms in one go.
Radio.nbf
Ms.nbf
Exteneded Rom.nbf (can’t remember the actual name) it looks like you are using a different up loader or have different files to upload. I can only really help with advice on the process that I followed. I can provide you with the files that I had, if you want it will change your 02 format to I-Mate in English.
Does this help?
well I know we have differnet purposes but we should use the same tool I guess if we followed this link. http://forum.xda-developers.com/viewtopic.php?t=6470&highlight= and the tool is Multi-Port/USB TTY program to back up rom or extended rom. Please provide me the info to back up the rom no matter if to SD or HD. Thanks for ur time man.
I think that you can try using ositools I will find the link and then post it, but again I am still not sure how you reinstal it afterwards
whafni77 said:
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Click to expand...
Click to collapse
I am in the same situation with you, have you solved yet?
Serial / USB V1.01
I had the same problem, and I found the cause to be a USB Hub. I found that when I plugged the cradle directly into my PC I managed to load the update without any further problems.
I hope this helps
you have to disable usb or com port in activesync, before trying to connect with mtty, or terminal program.
see http://wiki.xda-developers.com/wiki/HimalayaBootloader
Hello fellows ..
First time on this forum .. i usually stick to photography forums .. however fate brings me here ..
Noticed an announcement for update ROM for the XDA II, and tried to install it .. i have an XDA IIi , on O2 .. sim unlocked ... .. PDA was on cradle .. it asked for a confirmation .. i did a system reset as advised ... the Upgrade patch didnt give no error messages .. and seemed to be working OK, till it said that patch cant be applied ..for i dont know what reason ..
It seems my phone is left without a ROM now .. ( when i turn it on, it shows what U guys probably call a Bootloader , a screen saying version 1.02 or something , and if connected to USB, says USB ) .. but doesnt go anywhere from there ..
I tried installing XDA developers special ROm 1.2, but it doesnt seem to install .. Tried another ROM upgrade, but that requires ActiveSync, which doesnt obviously detect my phone any more
Can please tell me in steps .. 1, 2, 3, .. what do i do . . i know how to perform an appendicectomy but know very little about ROMS of phones ..
please kindly tell me .. what files to download, how to connect to ActiveSync if needed, i have a 128 MB card if needed, have teh USB cradle .. and have an O2 monthly SIM.
help here will be appreciated and remembered for a long time
Kind regards
Execute HimaGetDeviceData.exe on your device.
Execute HimaGetDeviceData.exe on your device. There will be no visible indication that it has run, but it will produce a file called DeviceData.txt in the Windows folder of the device.
I UNDERSTAND THAT I HAVE TO DO THIS ABOVE MENTIONED STEP
but how do i do it when my XDA wont start at all ???
XDA developers special ROm 1.2
Click to expand...
Click to collapse
if you have a himalaya device this rom is not for you
it's only for walaby devices
this is where you get info
http://wiki.xda-developers.com/index.php?pagename=Himalaya
http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen
Hi guys,
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
I've searched the forums and found few ways to downgrade back to wm5 but those aren't the same conditions with what im facing. Can someone recommend how can i downgrade back to wm5 with the conditions that im facing? All you help is much appreciated. THank you.
You are lucky , at lease your device now become atom. My was totally cannot on power and just vibrate. Till I have to sent it back to HP SC and change the main board . Can you understand chinese , if yes than I have a solution you may try . Else you have to wait . I just download a program and doing some testing , the program is in chinese language .
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
elus said:
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
Click to expand...
Click to collapse
I don't think you still can claim under warranty unless you can make your phone total can't on and access to windows mobile. Last time I sent it back they charge me RM 385 to change the main board . I did talk to their technical personal , it seen like they don't know what is bootloader and flash it back to original rom . What they do was just change the main board with preloaded program .
Good luck
If you think that you can claim you warranty , than you just go a head . If not , may be you can access my thread "HP6828 WM6" , download any one of the rom that I post , follow the instruction accept downgrade bootloader . Enter your phone in bootloader mode . If you can start the process , than it will flash a new hp bootloader into your phone .
Against . Good luck
Cheers
I'm from malaysia also.
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
elus said:
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
Click to expand...
Click to collapse
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
nhocbanme said:
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
Click to expand...
Click to collapse
Can share the information how to restore back the HP original bootloader ? And the procedure . Thanks
First you must have HP bootloader file (Eboot.nb0) 1.01 or 1.05 are OK.
- Use DRUU to restore Bootloader : replace ATOM bootloader file with HP bootloader file
- Use miniSD to restore Bootloader : copy Eboot.nb0 to miniSD card, go to bootloader ... wait 1' it will auto hard reset.
After flash successfull remmember remove Eboot.nb0 from miniSD.
- Reflashing Bootloader using JTAG. (Use only when can't use two above menthods)
HP Bootloader 1.01 : http://rapidshare.com/files/82853862/HP_BL1.0.1.rar
HP Bootloader 1.05 : http://rapidshare.com/files/82853924/HP_BL1.0.5.rar
nhocbanme could you please specify which specfic DRUU should be use for your method? Thank you.
You should use DRUU of Chartreux, replace Eboot.nb0 and choose OS and Eboot
Remember copy a HP68xx ROM (diskimage_Ver.nb0) to C:\Windows\Temp with DRUU of Chartreux then start...
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
elus said:
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
Click to expand...
Click to collapse
-You must extract RUU in C:\Windows\Temp (no sub folder) then replace Eboot.nb0 with Hp bootloader 1.01/1.05
-Copy a diskimage_Ver.nb0 (any ROM WM6 for HP 68xx) to C:\Windows\Temp
-Run the DRUU program and choose OS and Eboot and start.
Goodluck !!!
It worked! Thx a lot nhocbanme and wantat. The methods restore the atom bootloader to hp bootloader. The DSUU by chartreux is a good tool.
Now, i would like to put this solution up into the wiki. How may i do so? Thank you.
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
williamSun said:
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
Click to expand...
Click to collapse
OK, please read my topic, I'll post a WM5 ROM flash via miniSD
help !!
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
I dont think i can help u much here as im still new. From the looks of your problem, i guess u forgotten to cut the first 12bits (or something like that) of your bootloader when u use it to flash via mini sd. Maybe you can try the JTAG method mentioned in the atom wiki to restore your bootloader. Good luck.
Thanks guys!
The same exact thing happened to me yesterday..I was already about to sell my ipaq as a dead unit and i came upon this thread and after following the steps it did made ipaq alive again..
thank you very much guys,i hope you continue to help more people..
god bless and best of luck to you
more power xda-dev!
hello every1, i am not very much into winmobile, i am symbian freak for a very long time.
in symbian there is no possibility to flash bricket device at home, ant that is spwcialy what i like at winmobile
i have htc cingular 8525 and it was running wm5.
rgbw string:
HERM100
IPL-1.04
HREM100
SPL-2.10.Olipro
and iv tryed to upgrade it to wm6. it stoped on 11% at image writing on ROM, and give me error 262. i remove battery, wait, plug back.... and it started to write again. and stoped on 11% again.
so iv changed pc(go to my friend), and same thing again.
iv even changed cable(from nokia 6120c hehehehe) nothing works
my ROM is deleted and i only have RGBW screen(bootloader)
is there any possibility to boot my device? form mmc???? anything? i am runing activesync 4.5.0
iv readed a lot of tuts, but ne1 helped me.
i hope that someone solved this problem.
thanx in advance
wook
[email protected]
It sounds like your radio has been stuffed... This is BAD...
First, try to flash a stock carrier rom(preferably your original carrier rom) and see if it goes past the 10-15% mark. If not you can try to flash a Radio only rom.
The best way, since it reset into bootloader anyway & (good onya) you have Hard SPL installed, is to use the sd card method.
1. Format sd card fat32.
2. Copy the .nbh file of the os/radio rom you want load Hermes onto sd card and rename to "Hermimg.nbh".
3. Put sd card in Hermes and reset. Follow prompts...
Make sure you have a charged battery as it is pretty battery draining (especially multiple flashes).
If you can't get the radio rom on, you can AT LEAST install a new OS only rom. It will be a good PDA BUT won't work as a phone anymore...
Good Luck...
thank you for reply.
my device do not reboot in bootloader. it stays there. only that RGBW screen for ever.
i was testing it wht plug-unplug usb, and it allways show me if it is serial or usb.... that means that system is functioning.
i try to bootup wht mmc fat, and it didnt work
tell me what files do i need to transfer to mmc? do i need to change name of RUU.....exe to stg else or just nbh thing?
and in what location on mmc should i save it? or just in mmc:\ (root)
and can i hack my radiorom after i setup system? or i need to do that before?
thanx again
btw i am poweruser of symbian, and i am proud owner of smallest s60v3 device (6120).
i found on it samsungs processor.... and i belive that it is similar as windows mobile. and we have a lot of troubles wht rom upgrading... is there any possibility to include you guys in symbian ROM moding? it would be gr8 bcs i didnt cee much skilled developers for windows XP in symbian freak community
btw some guy just told me that he has some java application which enabling write on ROM and if he say truth he will share it wht me.
he is pc/phone servicer, and he is really good as far as i know.
if this thing exists, is there any possibility to extract RUU from exe to pc and i would copy/paste every single file(wht some changes) as i want to do to my nokia hehehehehehehe
wook
"my device do not reboot in bootloader. it stays there. only that RGBW screen for ever." - THIS IS BOOTLOADER...
On the screen it should say what IPL and SPL you have, What are they?
2. Copy the RUU_signed.nbh file of the os/radio rom you want load Hermes onto sd card and rename to "Hermimg.nbh". You can use a radio only rom or a stock carrier rom - after flashing carrier rom and if the radio rom is restored then flash radio of your choice.
As for running windows on a symbian phone, I don't really know but I'd think that it wouldn't work as the symbian os may have hard wired drivers in the device. You'd have to ask some-one else in the know....
Cheers....
ultramag, iv posted spl and ipl version in 1st post
btw i didnt think abt runing winmob on symbian device, i was thinking of making RUU for symbian.
while RUU is rar file, we could make one for symbian, and bricket phones wouldnt be needed to send to service. btw we could then deit rom and remove platsecurity and make symbiansigned useless. then wount be any need for ROMpatching...(it pach ram actualy) all we need is drivers for symbian device and that we dont have
bt smthing will come i am working on clocking my 6120c and so far no sucess
btw, thank you for help, i am going to load mmc tonight (16:42 here)
ultramag69 thank you my friend for suport. iv successifuly get up my system
heheheehehehehe
btw i dont have imei info and Radio Rom version
i think that i should use CID and SIM unlocker?
As I said on the 2nd post, Your radio rom may be stuffed. This could mean its an unfixable brick. You can use the PDA functions BUT you may not be able to restore the Phone functions.
Using the sd card method though, you can try to install a radio only rom (this only tries to install the radio, the OS you have on there will remain the same so even if the radio rom install is unsuccessful you can still use the PDA functions).
You should also try to install a carrier stock rom (rom supplied by your original carrier) as this , on rare occasions, has restored the radio rom.
Good luck in your Endeavour..
Cheers...
i will try to run radioROM.cab from mmc. seems like stg is wron wht my usb cable. it cant get synced wht pc....?
i will veawe its hardware and check "all" tngs from usb to rom and to flash, at least till crystalls
btw this platiform is awsome
wht resco i can edit rom files??? whd i am amased
i just need paint and hex editor
and ill make anything
btw is there any dll exe... decompilers??? and i need to check is there python for wm6
and then ill be able to write my own programs
thanx bro again
You have bricked hardware radio - flashing radio rom wouldn't work. Send it to good service and probably they will repair it.
hmmm, i would sen it right now, but there is no service around...., and i am better in hardware and software more than 75% local servicists....ill gess tht ill figure stg
ppl, i am wondering:
why memory card is displayed in "device:\" as folder? as far as i know it is a disk(fat32) and why i have extended_ROM and option to remove it?
why i cand access to orginal ROM drive? and why winm0b is playing wht virtual drives?
offtopic:
does any1 has experience wht pythonCE? and if there is ziped command samples for pythons compiled library? i would like to get it
Thank you
wook
It is not clear if you fixed your phone.
It does not sound like you have followed ultramag69 instructions very well. Probably because Englsih is not your first tongue and you have little knowledge of PPC.
You need to download a Radio ROM here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Then follow the instructions here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
A few points that you need to understand. Resco can not edit ROM files. Your Hermes does not use a MMC card it uses MicroSD. If you are connected to ActiveSync then your Storage Card shows up as a folder; that's just the way it is! Pretty much all your other questions are answered in the WIKI here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have an HD2 512MB.. with a test rom ver..SPL 0.64 i canno't find an official rom or something to boot up.. i have tryed to instal a normal rom (official) and after 92 % freez .. now it's blocked on "update mode" 3 colors display .. i do |Hard|Sof|Reset .. and nothing.. please help with my SN ht97mnw00210 i can't find a rom.. PLEASE HELPPP .. if anybody can do.( (SRY For my bad engl)
you will probably need a goldcard, though even then i am not sure.
You may be able to flash with SSPL, certainly HSPL will not work.
Try and PM a user called xmoo, he seems to know a LOT about test models.
Plug in the USB cable and connect it to your computer.
Install HSPL
Install Radio ROM (if using a custom ROM)
Install ROM (standard ROMs include the Radio ROM)
Ignore the fact that it requests that you have to have ActiveSync/WDMC connected device, as bootloader mode gets around that.
Please read * THIS * - then read it again before doing anything.
Your phone isn't bricked. Just take you time and your phone will be working fine.
fred_up said:
Plug in the USB cable and connect it to your computer.
Install HSPL
Install Radio ROM (if using a custom ROM)
Install ROM (standard ROMs include the Radio ROM)
Ignore the fact that it requests that you have to have ActiveSync/WDMC connected device, as bootloader mode gets around that.
Please read * THIS * - then read it again before doing anything.
Your phone isn't bricked. Just take you time and your phone will be working fine.
Click to expand...
Click to collapse
except that hspl wont work on his spl......
fred_up said:
Plug in the USB cable and connect it to your computer.
Install HSPL
Install Radio ROM (if using a custom ROM)
Install ROM (standard ROMs include the Radio ROM)
Ignore the fact that it requests that you have to have ActiveSync/WDMC connected device, as bootloader mode gets around that.
Please read * THIS * - then read it again before doing anything.
Your phone isn't bricked. Just take you time and your phone will be working fine.
Click to expand...
Click to collapse
how i can install Radio standard rom etc if my SPL is 0.64 and HSPL work with 1.x
give me a hand ..
GOLDCARD - :Allow non signed Software on the Leo
--a: install a regedit software on your Leo e.g. PHM regedit also original PHM Site (offline at the moment)
--b: Run the regedit software
--c: Goto HKEY_LOCAL_MACHINE\Security\Policies\Policies
--d: Look for 00001001 double click it and change the setting from 2 to 1
--e: Reboot the HTC LEO
My phone is not able to run WM .. directly enter on update mode ..
SSPL - Is posible to flash with sspl .. but i don't find a clearly NooB theard ..
denny_the_one said:
GOLDCARD - :Allow non signed Software on the Leo
--a: install a regedit software on your Leo e.g. PHM regedit also original PHM Site (offline at the moment)
--b: Run the regedit software
--c: Goto HKEY_LOCAL_MACHINE\Security\Policies\Policies
--d: Look for 00001001 double click it and change the setting from 2 to 1
--e: Reboot the HTC LEO
My phone is not able to run WM .. directly enter on update mode ..
Click to expand...
Click to collapse
this is for finding the sd card serial, doesnt need to be YOUR phone, can be any phone, or a laptop with sd card reader, or pc with pci bus sd card reader
SSPL - Is posible to flash with sspl .. but i don't find a clearly NooB theard ..
Click to expand...
Click to collapse
put rom.nbh in folder, put sspl.exe in same folder, boot to bootloader, connect to usb, run sspl
samsamuel said:
this is for finding the sd card serial, doesnt need to be YOUR phone, can be any phone, or a laptop with sd card reader, or pc with pci bus sd card reader
put rom.nbh in folder, put sspl.exe in folder, connect to usb, boot to bootloader, run sspl
Click to expand...
Click to collapse
With official rom 92% With custom rom 0%
oh well, worth a try.
when i want to update with official rom after 4% my phone vibrate shortly.. it's ok ?
I don't get it why all the prototypes are in east europe.
The issue is the Radio. Radio 1.x doesn't let you upgrade.
Flash this rom: http://s1.moghtader.net/LEO/PROTHREE/CID/RUU_Leo_HTC_WWE_0.67.405.1_Radio_Daily_1550_Debug.zip
Make shure the phone boots up, and then flash this: http://s1.moghtader.net/LEO/PROTHREE/CID/RUU_Leo_Radio_20090818_transition.zip
This will update the radio, after this you can flash whatever you want.
Solved!
This phone was send from netherlands friend i have somebody there .. i will try now your steps ..
denny_the_one said:
This phone was send from netherlands friend i have somebody there .. i will try now your steps ..
Click to expand...
Click to collapse
Damn, can you give me his contact details.
Does the back of your phone say HTC PRO THREE ??
lasa un numar de tel sau un id in cazul in care nu te descurci
SOLVED tnx ! i will give you the phone number tomorrow when i take contact with my cousin there ..
Extrem de fericit !!! Functioneaza ms frumos ! denny_the_one id meu daca e ceva si vrei sa mai inpartasim diferite probleme ..
YOU ARE THE BEST MAN OF THE WORLD !!!
denny_the_one said:
SOLVED tnx ! i will give you the phone number tomorrow when i take contact with my cousin there ..
Extrem de fericit !!! Functioneaza ms frumos ! denny_the_one id meu daca e ceva si vrei sa mai inpartasim diferite probleme ..
YOU ARE THE BEST MAN OF THE WORLD !!!
Click to expand...
Click to collapse
Help me and trade you phone with my HD2
Or help me find a new prototype for me, cause I ****ed up my old one.
.. i think it's not solved complete .. i still have 0.67 SPL .. i canno't make HSPL ? i have instaled all what you gived me ! sry but i'm very NoOB ..try to flash from sd card ? or SSPL ?
i want update to a custom rom !
denny_the_one said:
.. i think it's not solved complete .. i still have 0.67 SPL .. i canno't make HSPL ? i have instaled all what you gived me ! sry but i'm very NoOB ..try to flash from sd card ? or SSPL ?
i want update to a custom rom !
Click to expand...
Click to collapse
Now you have to flash this rom : http://www.shipped-roms.com/shipped...Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
After this you can flash HSPL and flash custom rom.
downloading ... man, you make me happyer then was when i bought it .. i can't give u enough tnks ..
OK SOLVED ! Work HSPL ! Work any ROM !