hello everyone,
i have a little problem. i just tryed to flash the d1 rom to my neo. but in the middle of the process i got a bluescreen and everything went down the hill.
the neo just boots till bootscreen and does nothing more. the upgrade.bat included in the rom does not do anything. i just downloaded the fantastic_b4 step 1, in hope i can flash from bootscreen but the file is passwordprotectet and i have no idea where to get the pass from.
any help?
thanks in advance.
consider this solved.
found the solution in the wiki
Related
Greeting all.
As said, I have bricked my one day old phone.
http://www.aliexpress.com/snapshot/230332055.html
I accidentaly flashed it with wrong rom (it was late and didn't read).
Now when i try to flash it, i get this message:https://www.dropbox.com/sc/5cdxl6cdemcbvra/MkG1w84hHd
If anyone has the solution or know how to help me, I would appreciate it.
I wanted to flash it because my sim card didnt catch any signal (thinking that flashing could resolve the problem).
Flashed with this rom (not correct):http://www.needrom.com/mobile/star-x920e-6/
Should flash with this one:http://www.needrom.com/mobile/star-x920e/
Thank everyone in advance.
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
http://www.needrom.com/wp-content/up...ROOT_V0401.zip
2. Download now this ROM:
http://www.needrom.com/wp-content/uploads/2013/05/ML_20130423_STAR_X920_ROOT_LDv0404.zip
""" when you flash click on UBOOT and selected "LK_CD2.bin" and flashed """"""
you will flash only this image now!!!
Good luck!:good:
Repost Links.
jsain said:
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
needrom /wp-content/up...ROOT_V0401.zip
Hi, can you re post the 1st link, its not complete. Thank you.
Click to expand...
Click to collapse
Hello, I have a bricked x920 but e2001v21_v89_zlh_hd version, I tried everything but cant find solution.
I'm trying to flash using windows 8 but, I tried this rom but I still got "enable DRAM failed" as in the 1st post.
Any solutions?
Hi guys,
After flashing different Recovery ROMs I've finally bricked Star (Tengda) x920 8Gb device by flashing ROM from this link needrom.com/mobile/star-x920e-6/
Now when connecting it to Windows 7 x64 SP1 computer it is recognized as "MT65xx Preloader" device and after a few seconds disconnects itself. It connects/disconnects seems like forever.
I have installed driver for this device, but behavior stays the same. I've tried Mini Windows XP (x86) SP3, behavior stays the same.
What could be possibly done to recover device?
Please be patient, noobie here
UPD: This was resolved via video posted on needrom.com/mobile/star-x920e-6/ page.
star x920 flashing
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
does anyone have the oem room of the star x920Q?? i cant fine it anyware...
somebody had this rom??
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
did you find a solution ?
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
Same problem here with the exact model. Any solutions? Thanks
Right , Hello
Greetings from Ireland and to any Irish people on this, Hows it going ?
Bought this Goophone i5 from aliexpress there last September, http://www.aliexpress.com/snapshot/262984369.html
Everything was fine until the other day when the screen calibration started to act funny so after many resets and the rest it still didnt fix it I thought to myself right ill try flashing a new ROM to it, couldn't be that hard ? right ?.. I've done this with PSP's many moons ago and thought things would be grand.
So I read loads of tutorials and forums here and decided to give it a go.
I used the flash tools from this thread
http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
and this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
The scatter file matches with my phone so im baffled to where the problem is,
My phone wont turn on or boot into recovery mode ,and I've no backup of my initial rom.
I tried flashing it again and everything went fine in flash tools with no errors but the phone still wont turn on or boot, it just slightly vibrates.
Is there anyway where I can completely wipe the phone and re flash it?
Any help on this would be greatly appreciated because I have absolutely no idea where to go from here.
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
I need help with my mediapad S8-301L i can only get it to the logo screen on boot. and if i plug it in to my laptop i can get it in to fastboot mode. is there a way i can recover this device using fastboot????
i had rooted it and installed twrp like i had before. but due to formatting and starting a fresh to installing skygo i found my self rooting it again this time the same method bricked my device.... any help would be loved thanks in advance...
:good::good::good::good:
M1 s8 301l
hi m8, did u manage to fix this issue? im currently experiencing the same thing with mine, its just sitting at The EE splash screen, i can access fastboot, but it will not flash the system.img located from the update file,
would love to find out if there was a fix to this, i can even find the original EE rom that came supplied with the device...
Did you solve this , mines bricked due to overheating n desperately need a list from /dev/block/platform/msmxxxxx/by_name
That way I can extract the update.app correctly
Any help obliged
Rgds
Hi I really need some help unbricking my phone.
I have a doogee Mini F1 Turbo which was rooted. Today I did an OTA update (bad idea).
During the update the word ERROR appeared on the screen. When the phone rebooted it was stuck on the white boot logo screen.
I've downloaded the SP Flash tool and rom from the doogee website
When I try and re-flash I get the Message "Error initializing scatter file failed. Please check the name of scatter file you load is legal"
Hopefully some body can point me in the right direction and help me get my phone working again.
Thanks for your time,
Gavin
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Soultion
Hi Denclan,
Sorry about the delay inb replying.
Yes I found a solution to my reflashing problem. What I had to do was move the contents of the ROM Download into to same folder as the Flashing program. This then worked.
I would be carefull with the R07 update.
After reflashing my phone I updated it before rooting. Then rooted it. Everything seemed fine but the battery drain was shocking so I've flashed it back to R05 and that works a treat.
Hope this helps you out.
Gavin
denclan said:
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Click to expand...
Click to collapse