Hi,, I have used shelltool to install TNT 6.1 from wizlove all went smooth
Then i decided to try a different radio so flashed 02.71.11 from o2.37.11
all went smooth no problem,, It wasnt a day and I had to get rid of 02.71.11
so tried flashing to others and ruu loses conection on staus bar and screen goes into the green red mode,, since then I have tried to do hard spl and it gets as far as the white screen and then ruu says lost connection
I cant seam to do anything now cant flash wiz love ether
help me please head is sore from reading too much
Thanks
what have I done now
OK so I tried going back to wizlove with the shelltool and its now stuck on the imate splash screen,,,maybe I should leave this thing alone
How can I fix it?
try to make Hard rest then install original rom wm5
that will work...
Hey,
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
AND just dont use explosives like TNT on your device ....
Related
I was instaling NBD_v8.3_8MB trough shelltool on my MDA Vario then something happened and my PC restarted I whink it is because of the electicity .... so now when I restardet my phone it is stuck on the T-mobile screen Where it is writen.....
IPL 2.21.001
SPL 2.21.Olip
GSM 02.19.11
OS 6.6.6.666
Thanks in advance
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
well I looked all day what to do and I can not find solution
I just can not understand how to flash the phone
I found one solution via some kind of Wizard_love, but again I do not know what to do
Please help i am haveing the same thing just did it today i have the Cingular 8125....i have held camera+reset and got into these Red,Green,Blue,white screen and it says IPL 2.25 and SPL 2.25 now when i run the ROMUpdateUtility_Wizard_NoID it does not work i have my usb pluged in and my phone says USB please help
Thank you
PS.
I am running Vista
IPL 2.25
SPL 2.25
GSM 02.25.11
OS.6.6.6.666
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Ok i have try everything. I have tried the RUU from the HTC site and even everything else when it is searching for the PDA and crashes idk why. I turn on my phone holding the camera and i get to the Red,Green,Blue,White...Plug the USB in and the phone says USB but not my computer??? so i don't know what i need to do please HELP i just got the phone and read you can do all this stuff
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
starkwong said:
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
Click to expand...
Click to collapse
Were can i get HardSPL,SSPLand the flash back up?
all i have is the original rom
You guys wanna see bricked? I have a BRICKED! phone... My MDA was the unfortunate victim of a car accident. When my car went carreening off the road, my MDA went flying through the air and ended up on the floor of the car but not before hitting virtually every surface on the inside of the car.
Now my charge port is completely snapped off and my battery shorted out when I was trying to hold the charge port in place to charge it and fried the main board. DEAD. NO MORE.
THAT MY FRIENDS, IS BRICKED....
No worries though, I already ordered a TyTN II
Cool can you help?
Oh and i had the same problem with my mda and i got it replaced from tmobile. - the easiest way to reapair an MDA is getting it replaced ^^
offtopic
@dharvey4651
Why didn't you buckle up your phone?
Well i got mine up and running agian just used XP and install the RUU from HTC YES.......Now when i go to install WM6 when i press update were it should show me the Ver. of the one i am installing on my phone it does not say why please help and what do i need to install WM6 on my phone?
Just a quick question did you read the other threads there are already. They basicly explain everything clear and good
i have just still stuck on some stuff
dferreira said:
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
Click to expand...
Click to collapse
jukata
first of all,as dferreira has assured u that ur device is not bricked,secondly ,you already have HardSPL,that means your device is unlocked,just follow his instructions,download any wm6 Rom and flash,it'll good to go,but if u still want to be sure,download WST Tool from the below given thread read carefully and apply the tool to verify the status of ur device,
http://forum.xda-developers.com/showthread.php?t=329170
u can flash NBD rom which u have or any other wm6 rom,goodluck
NVM i am on the Other Page! Thanks
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
kastro said:
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
Click to expand...
Click to collapse
Soft SPL only allows you ONE update, so phone is CID unlocked only when Soft SPL is loaded.
It's normal for the RUU to stick on 99 % for a couple of minutes, The whole update will take aprox 10 minutes.
You can try the hard SPL from there you are semi-permanently CID unlocked.
Good luck,
EquinoXe
Ok Guys, gonna test all you senior moderators / users here and put you to challenge to see if you can help me get my wizard G4 back up and running.
For the past couple of days Ive been faffng about the forums looking for a way to change my g4 WM5 to WM6, after digging in i realised i had to install vmware and put xp on it, so far so good.
After that ive tried every rom (with all their own prepackaged files) and got nowhere, every time i managed to get one that would even get to a percentage bar screen it would go to 100%, restart and nothing changed. I even tried the all new soft spl way but got some error msg saying a .exe was missing.
tonight, i managed to get a ´302´ error and its now stuck on the bootloader screen, my question is:
how can i ´flash´back to normal state from here , doesnt the pda have to be synced in order to flash it again
I hang my head in shame, i managed to mess it up real this time..
My pda rests in your hand gents. id appreciate the help
Thanks.
IPL : 2.17.0001
SPL : 2.17.0001
GSM: 2.17.1
seems like ur on G4 CID LOCKED and u try to flash with RUU "NO WAY BRO "
flash ur official rom 1st using RUU while on bootloader then flash any G4 safe rom using :
ShellTool
http://forum.xda-developers.com/showthread.php?t=293480
or
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
i hope i helped
didnt work, thanks though
thanks for the tip, i tried it and
with soft spl:
when i ran START-sSPL.exe it opens up in cmd and the progress at the bottom doesnt go anywhere but 0.
and shell tools managed to get al the way untill you press OK, when decides to crach..every time.
again, i thought in order to flash these devices to have to have an active sync. but you cant sync things when its showing the red-green-blue bootloader screen...or am i missing something.
more tips are VERY welcome, thanks lads.
PS sorry for being such a noob, pdas are a new thing to me Ñ= and this ones only 2 weeks old for me
shelltool doesn`t crash it hangs only just wait for 30-40 min and unplug ur device and hard reset it will work
aslo on the bottom of bootloader screen u will find USB that means that its connected and it can sync
ill try it.
yeahi seen the usb writing, ok.
ill leave it for 30-40 mins and see what happens, thanks alot for your help so far!
TroXX said:
yeahi seen the usb writing, ok.
ill leave it for 30-40 mins and see what happens, thanks alot for your help so far!
Click to expand...
Click to collapse
u can`t flash with shelltool on bootloader mode but u can flash ur official rom using RUU on bootloader
ok here is what u need to do
1- flash ur official rom or "wizard love rom " using RUU in bootloader mode "RUU works under XP only "
2-after flashing ur stock rom flash and u got up and running OS flash using shelltool "works fine under vista "
uhh..
i downloaded the wizard_love rom, it got to 99% then i got the same 302 error message, theres asmallrecovery process you can go though if this is the case. i followed that and the power went off...hopefully its just the battery...
8125 G4 softspl + flash success!
I just went through the same situation with my phone:
Cingular 8125 G4
IPL: 2.25.0001
SPL: 2.25.0001
GSM: 2.25.11
After a failed unlock attempt/flash, I flashed back using the WizardLove rom to get it functioning, then I used the SoftSPL flash to then allow me to upgrade to Octaivoi 5.0 rom.
Octaivoi's 5.0 *running 12+ hours flawless*
http://forum.xda-developers.com/showthread.php?t=323485
See links in profile.....its all there.
@Trox: Try following this tutorial:
http://forum.xda-developers.com/showthread.php?t=298613
getting somewhere
hey guys thanks for all the help so far.
recently ive been stuck trying to flash the wizard love rom onto my G4, but today i finally cracked it. For some random reason, the phone didnt like the original wizard love rom described in vippies tutorial ( which i looked at , at the very start, a kick ass tutorial bth), i even went out and bought a new usb cable just incase it on the off chance it was that, nope. I kept getting 2 different error messages do to with the connection. 630 i believe was one of them (which is just a general connection error msg).
but today, after searching for a while i found a customised wizard love rom on a bittorrent site that worked like a charm. so im alln gear´d up with a working pda again ! woohoo
So im back to phase one....phasetwo...get wm6 on it or probably break it again for another 3 weeks in the process.
wish me luck !
lol
Nah, i took your adivce and tried to flash that octavia rom onto it...
back to the good old red green and blue screen except this time it doesnt display RUU at the top right hand side anymore...im pretty sure thats a bad thing?
woot!
woot woot!
lots of tinkering over the last few days has proven successful.
ive went from having a non working 9100, and trying hard to find a base rom that would flash properly to:
Finding a wizard_love rom and installing it
managing to use soft spl (which god knows why decided to work after the gizillionth time) and flashing a very respectable wm6 rom to it ( Octaivo, thanks for the tip johngalt82)
And..AND!! even getting the HTC_Touch_ Home_Plugin displaying wonderfully
happy as a pig in ****.
for now...
next task : touchflo
elhamy said:
u can`t flash with shelltool on bootloader mode but u can flash ur official rom using RUU on bootloader
ok here is what u need to do
1- flash ur official rom or "wizard love rom " using RUU in bootloader mode "RUU works under XP only "
2-after flashing ur stock rom flash and u got up and running OS flash using shelltool "works fine under vista "
Click to expand...
Click to collapse
Elhamy, I do owe you the best thanks...
I ruined my KJam for the last week and you really helped in getting my life back
thanks man
I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!!
Hey,
First try an hard reset, this can be done with pushing the _commmenager-button+Camera-button+stylus-reset(on bottom of ur device)_ at the same time, just release the stylus-reset some earlyer then the other 2 buttons.
if thats not working:
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
whoops doublepost...
Hey guys,
I wanted to make some improvement with my Prophet, but firstly i flashed it with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship but then I spotted WiFi is not working properly, so I started to get newer ROMS but what was difficult to understand is that after i flash him i didn't have bootloader mode at any other ROM which I wanted to put in... now the phone is stuck on bootloader with logo of Qtek and:
IPL:2.15.0001
SPL:2.20.0001
GSM:02.47.21
OS 4.0.0.0
Hey,
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
hi all,
i have recieved a hermes with boot loader screen (tri color) when i try to switch it on it goes directly to 2 color screen doesnt go further at all. I've read the sticky thread . As the phone which i have shows on screen the following
HERM100
IPL-1.04
HERM100
SPL-1.40. Olipro
thats it nothing else exept tri color screen so read the sticky threadabout how to unbrick hermes and did following options when i flashed tmobile uk rom it goes further but it stucks at 11% and doesnt go further and when i try to flash a rom which has 1.04 (528420-ruu_hermes_1[1].18.255.3_1.18.255.108_1.03.03.10_qtek_wwe_ship) but it doesnt do anything with phone, it cant even detect the phone and give error straight away can anyone please guide me what should i do further to alive this phone
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
hi no reply but 53 views any mod plz help
WHaT YOU MEAN?
by:
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
---I think your hermes is bricked if you cant upgrade even a stock rom is bricked dude...
For the last thing you could do about it... flash a stock rom like ATT stripped you can find it on the WM6 subforum here on hermes forums... all the chefs put in the main post the link to it... if it doesnt works so... you are screwed up...
be sure ahave this:
Battery at 100% at least 60%
XP pc not vista not wm7 ok?
A nice usb cable and nice USB ports too on the XP pc
Dont run anything till it finish and... dont flash with SIM card and microSD inserted.
Go ahead and post your results again.
hi thanks for your reply i have tried these 2 following roms
HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108 (stucks at 12%)
RUU_Hermes_CINGULAR_WWE_3[1].62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship (stucks at 11%)
with these its not really working anyother thing which u think i should do
br
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
mmmm
Sounds like your batt is almost dead... maybe it shows... 70% but drains to fast is lying to you... or your cable is broken somewhere...
you can DL the stock stripped here
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
ultramag69 said:
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
Click to expand...
Click to collapse
yes u r right mate my phones radio rom was corrupted and thanks to + Que PPC for providing help and link of the official AT&T WM6 striped rom which turned my phone back to normal but the problem is when i went to device information it says like this
ROM version: 3.62.502.3
ROM date: 10/11/07
Radio version:
Protocol Version:
so radio and protocol versions are blank nothing is there so can u please tell me wt should i do to solve this or its not solvable at all thank you very much indeed to you guys. I really appreciate it
br Sherry
Not solvable... You might like to try running your SHIPPED STOCK Radio Rom, if you know what it is, but there isn't much hope of recovery once the radio goes... Look at it this way, couldn't hurt....